ABSTRACT
ConspectusTransition metal dichalcogenides (TMDCs) exhibit favorable properties for optical communication in the gigahertz (GHz) regime, such as large mobilities, high extinction coefficients, cheap fabrication, and silicon compatibility. While impressive improvements in their sensitivity have been realized over the past decade, the bandwidths of these devices have been mostly limited to a few megahertz. We argue that this shortcoming originates in the relatively large RC constants of TMDC-based photodetectors, which suffer from high surface defect densities, inefficient charge carrier injection at the electrode/TMDC interface, and long charging times. However, we show in a series of papers that rather simple adjustments in the device architecture afford TMDC-based photodetectors with bandwidths of several hundreds of megahertz. We rationalize the success of these adjustments in terms of the specific physical-chemical properties of TMDCs, namely their anisotropic in-plane/out-of-plane carrier behavior, large optical absorption, and chalcogenide-dependent surface chemistry. Just one surprisingly simple yet effective pathway to fast TMDC photodetection is the reduction of the photoresistance by using light-focusing optics, which enables bandwidths of 0.23 GHz with an energy consumption of only 27 fJ/bit.By reflecting on the ultrafast intrinsic photoresponse times of a few picoseconds in TMDC heterostructures, we motivate the application of more demanding chemical strategies to exploit such ultrafast intrinsic properties for true GHz operation in real devices. A key aspect in this regard is the management of surface defects, which we discuss in terms of its dependence on the layer thickness, its tunability by molecular adlayers, and the prospects of replacing thermally evaporated metal contacts by laser-printed electrodes fabricated with inks of metalloid clusters. We highlight the benefits of combining TMDCs with graphene to heterostructures that exhibit the ultrafast photoresponse and large spectral range of Dirac materials with the low dark currents and high responsivities of semiconductors. We introduce the bulk photovoltaic effect in TMDC-based materials with broken inversion symmetry as well as a combination of TMDCs with plasmonic nanostructures as means for increasing the bandwidth and responsivity simultaneously. Finally, we describe the prospects of embedding TMDC photodetectors into optical cavities with the objective of tuning the lifetime of the photoexcited state and increasing the carrier mobility in the photoactive layer.The findings and concepts detailed in this Account demonstrate that GHz photodetection with TMDCs is feasible, and we hope that these bright prospects for their application as next-generation optoelectronic materials motivate more chemists and material scientists to actively pursue the development of the more complicated material combinations outlined here.
ABSTRACT
The crystal structures of ANb3Br7S (A = Rb and Cs) have been refined by single crystal X-ray diffraction, and are found to form highly anisotropic materials based on chains of the triangular Nb3 cluster core. The Nb3 cluster core contains seven valence electrons, six of them being assigned to Nb-Nb bonds within the Nb3 triangle and one unpaired d electron. The presence of this surplus electron gives rise to the formation of correlated electronic states. The connectivity in the structures is represented by one-dimensional [Nb3Br7S]- chains, containing a sulphur atom capping one face (µ3) of the triangular niobium cluster, which is believed to induce an important electronic feature. Several types of studies are undertaken to obtain deeper insight into the understanding of this unusual material: the crystal structure, morphology and elastic properties are analysed, as well the (photo-)electrical properties and NMR relaxation. Electronic structure (DFT) calculations are performed in order to understand the electronic structure and transport in these compounds, and, based on the experimental and theoretical results, we propose that the electronic interactions along the Nb chains are sufficiently one-dimensional to give rise to Luttinger liquid (rather than Fermi liquid) behaviour of the metallic electrons.
ABSTRACT
Colloidal nanocrystals (NCs), especially lead sulfide NCs, are promising candidates for solution-processed next-generation photodetectors with high-speed operation frequencies. However, the intrinsic response time of PbS-NC photodetectors, which is the material-specific physical limit, is still elusive, as the reported response times are typically limited by the device geometry. Here, we use the two-pulse coincidence photoresponse technique to identify the intrinsic response time of 1,2-ethanedithiol-functionalized PbS-NC photodetectors after femtosecond-pulsed 1560 nm excitation. We obtain an intrinsic response time of â¼1 ns, indicating an intrinsic bandwidth of â¼0.55 GHz as the material-specific limit. Examination of the dependence on laser power, gating, bias, temperature, channel length, and environmental conditions suggest that Auger recombination, assisted by NC-surface defects, is the dominant mechanism. Accordingly, the intrinsic response time might further be tuned by specifically controlling the ligand coverage and trap states. Thus, PbS-NC photodetectors are feasible for gigahertz optical communication in the third telecommunication window.
ABSTRACT
We investigate the time-resolved photoelectric response of WSe2 crystals on glass and flexible polyimide substrates to determine the effect of a changed dielectric environment on the speed of the photodetectors. We show that varying the substrate material can alter the speed-limiting mechanism: while the detectors on polyimide are RC limited, those on glass are limited by slower excitonic diffusion processes. We attribute this to a shortening of the depletion layer at the metal electrode/WSe2 interface caused by the higher dielectric screening of glass compared to polyimide. The photodetectors on glass show a tunable bandwidth, which can be increased to 2.6 MHz with increasing the electric field.
ABSTRACT
We demonstrate 230 MHz photodetection and a switching energy of merely 27 fJ using WSe2 multilayers and a very simple device architecture. This improvement over previous, slower WSe2 devices is enabled by systematically reducing the RC constant of devices through decreasing the photoresistance and capacitance. In contrast to MoS2, reducing the WSe2 thickness toward a monolayer only weakly decreases the response time, highlighting that ultrafast photodetection is also possible with atomically thin WSe2. Our work provides new insights into the temporal limits of pure transition metal dichalcogenide photodetectors and suggests that gigahertz photodetection with these materials should be feasible.
ABSTRACT
The bulk photovoltaic effect (BPVE) originating from spontaneous charge polarizations can reach high conversion efficiency exceeding the Shockley-Queisser limit. Emerging van der Waals (vdW) heterostructures provide the ideal platform for BPVE due to interfacial interactions naturally breaking the crystal symmetries of the individual constituents and thus inducing charge polarizations. Here, we show an approach to obtain ultrafast BPVE by taking advantage of dual interfacial polarizations in vdW heterostructures. While the in-plane polarization gives rise to the BPVE in the overlayer, the charge carrier transfer assisted by the out-of-plane polarization further accelerates the interlayer electronic transport and enhances the BPVE. We illustrate the concept in MoS2/black phosphorus heterostructures, where the experimentally observed intrinsic BPVE response time achieves 26 ps, orders of magnitude faster than that of conventional non-centrosymmetric materials. Moreover, the heterostructure device possesses an extrinsic response time of approximately 2.2 ns and a bulk photovoltaic coefficient of 0.6 V-1, which is among the highest values for vdW BPV devices reported so far. Our study thus points to an effective way of designing ultrafast BPVE for high-speed photodetection.
ABSTRACT
We use a facile plasma etching process to define contacts with an embedded edge geometry for multilayer MoS2 photodetectors. Compared to the conventional top contact geometry, the detector response time is accelerated by more than an order of magnitude by this action. We attribute this improvement to the higher in-plane mobility and direct contacting of the individual MoS2 layers in the edge geometry. With this method, we demonstrate electrical 3 dB bandwidths of up to 18 MHz which is one of the highest values reported for pure MoS2 photodetectors. We anticipate that this approach should also be applicable to other layered materials, guiding a way to faster next-generation photodetectors.
ABSTRACT
We investigate the time-resolved photocurrent response of CdSe quantum dot (QD) thin films sensitized with zinc ß-tetraaminophthalocyanine (Zn4APc) (Kumar , ACS Appl. Mater. Interfaces, 2019, 11, 48271-48280) on three different substrates, namely, silicon with 230 nm SiO2 dielectric, glass, and polyimide. While Si/SiO2 (230 nm) is not suitable for any transient photocurrent characterization due to an interfering photocurrent response of the buried silicon, we find that polyimide substrates invoke the larger optical bandwidth with 85 kHz vs 67 kHz for the same quantum dot thin film on glass. Upon evaluation of the transient photocurrent, we find that the photoresponse of the CdSe quantum dot films can be described as a combination of carrier recombination and fast trapping within 2.7 ns followed by slower multiple trapping events. The latter are less pronounced on polyimide, which leads to the higher bandwidth. We show that all devices are resistance-capacitance (RC)-time limited and that improvements of photoresistance are the key to further increasing the bandwidth.
ABSTRACT
Gold nanoparticles are intriguing because of their unique size- and shape-dependent chemical, electronic and optical properties. Gold nanorods (AuNRs) are particularly promising for various sensor applications due to their tip-enhanced plasmonic fields. For biomolecule attachment, AuNRs are often functionalized with proteins. However, by their intrinsic size such molecules block the most sensitive near-field region of the AuNRs. Here, we used short cationic thiols to functionalize AuNRs. We show that the functionalization layer is thin and that these polycationic AuNRs bind in vitro to negatively charged microtubules. Furthermore, we can plasmonically stimulate light emission from single AuNRs in the absence of any fluorophores and, therefore, use them as bleach- and blinkfree microtubule markers. We expect that polycationic AuNRs may be applicable to in vivo systems and other negatively charged molecules like DNA. In the long-term, microtubule-bound AuNRs can be used as ultrasensitive single-molecule sensors for molecular machines that interact with microtubules.