Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 8 de 8
Filter
Add more filters

Database
Language
Journal subject
Publication year range
1.
Appl Opt ; 55(25): 6887-92, 2016 Sep 01.
Article in English | MEDLINE | ID: mdl-27607263

ABSTRACT

We have investigated 4-µm-band SO3 absorption lines for in situSO3 detection using a mid-infrared laser source based on difference frequency generation in a quasi-phase-matched LiNbO3 waveguide. In the wavelength range of 4.09400-4.10600 µm, there were strong SO3 absorption lines. The maximum absorption coefficient at a concentration of 170 ppmv was estimated to be about 3.2×10-5 cm-1 at a gas temperature of 190°C. In coexistence with H2O, the reduction of the SO3 absorption peak height was observed, which was caused by sulfuric acid formation. We discuss a method of using an SO3 equilibrium curve to derive the total SO3 molecule concentration.

2.
Opt Express ; 22(3): 2473-82, 2014 Feb 10.
Article in English | MEDLINE | ID: mdl-24663539

ABSTRACT

We demonstrate the phase sensitive amplification of a high-order quadrature amplitude modulation (QAM) signal using non-degenerate parametric amplification in a periodically poled lithium niobate (PPLN) waveguide. The interaction between the pump, signal, and phase-conjugated idler enables us to amplify arbitrary phase components of the signal. The 16QAM signals are amplified without distortion because of the high gain linearity of the PPLN-based phase sensitive amplifier (PSA). Both the phase and amplitude noise reduction capabilities of the PSA are ensured. Phase noise cancellation is achieved by using the interaction with the phase-conjugated idler. A degraded signal-to-noise ratio (SNR) is restored by using the gain difference between a phase-correlated signal-idler pair and uncorrelated excess noise. The applicability of the simultaneous amplification of multi-carrier signals and the amplification of two independent polarization signals are also confirmed with a view to realizing ultra-high spectrally efficient signal amplification.

3.
Opt Express ; 17(14): 11440-9, 2009 Jul 06.
Article in English | MEDLINE | ID: mdl-19582059

ABSTRACT

Here we report the first demonstration of entanglement distribution over a record distance of 200 km which is of sufficient fidelity to realize secure communication. In contrast to previous entanglement distribution schemes, we use detection elements based on practical avalanche photodiodes (APDs) operating in a self-differencing mode. These APDs are low-cost, compact and easy to operate requiring only electrical cooling to achieve high single photon detection efficiency. The self-differencing APDs in combination with a reliable parametric down-conversion source demonstrate that entanglement distribution over ultra-long distances has become both possible and practical. Consequently the outlook is extremely promising for real world entanglement-based communication between distantly separated parties.

4.
Opt Express ; 16(23): 19118-26, 2008 Nov 10.
Article in English | MEDLINE | ID: mdl-19582004

ABSTRACT

We report the first entanglement-based quantum key distribution (QKD) experiment over a 100-km optical fiber. We used superconducting single photon detectors based on NbN nanowires that provide high-speed single photon detection for the 1.5-mum telecom band, an efficient entangled photon pair source that consists of a fiber coupled periodically poled lithium niobate waveguide and ultra low loss filters, and planar lightwave circuit Mach-Zehnder interferometers (MZIs) with ultra stable operation. These characteristics enabled us to perform an entanglement-based QKD experiment over a 100-km optical fiber. In the experiment, which lasted approximately 8 hours, we successfully generated a 16 kbit sifted key with a quantum bit error rate of 6.9 % at a rate of 0.59 bits per second, from which we were able to distill a 3.9 kbit secure key.


Subject(s)
Computer Security/instrumentation , Information Storage and Retrieval/methods , Optical Fibers , Signal Processing, Computer-Assisted/instrumentation , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Reproducibility of Results , Sensitivity and Specificity
5.
Opt Express ; 15(21): 13957-64, 2007 Oct 17.
Article in English | MEDLINE | ID: mdl-19550669

ABSTRACT

We report an experimental demonstration of the distribution of time-bin entangled photon pairs over 100 km of optical fiber. In our experiment, 1.5-mum non-degenerated time-bin entangled photon pairs were generated with a periodically poled lithium niobate (PPLN) waveguide by using the parametric down conversion process. Combining this approach with ultra-low-loss filters to eliminate the pump light and separate signal and idler photons, we obtained an efficient entangled photon pair source. To detect the photons, we used single-photon detectors based on frequency up-conversion. These detectors operated in a non-gated mode so that we could use a pulse stream of time correlated entangled photon pairs at a high repetition frequency (1 GHz). Using these elements, we distributed time-bin entangled photon pairs over 100 km of dispersion shifted fiber and performed a two-photon interference experiment. We obtained a coincidence fringe of 81.6% visibility without subtracting any background noise, such as accidental coincidence or dark count, which was good enough to violate Bell's inequality. Thus, we successfully distributed time-bin entangled photon pairs over 100 km.

6.
Opt Express ; 15(24): 15920-7, 2007 Nov 26.
Article in English | MEDLINE | ID: mdl-19550879

ABSTRACT

We report a field trial of differential phase shift quantum key distribution (QKD) using polarization independent frequency up-conversion detectors. A frequency up-conversion detector is a promising device for achieving a high key generation rate when combined with a high clock rate QKD system. However, its polarization dependence prevents it from being applied to practical QKD systems. In this paper, we employ a modified polarization diversity configuration to eliminate the polarization dependence. Applying this method, we performed a long-term stability test using a 17.6-km installed fiber. We successfully demonstrated stable operation for 6 hours and achieved a sifted key generation rate of 120 kbps and an average quantum bit error rate of 3.14 %. The sifted key generation rate was not the estimated value but the effective value, which means that the sifted key was continuously generated at a rate of 120 kbps for 6 hours.

7.
Opt Lett ; 33(7): 639-41, 2008 Apr 01.
Article in English | MEDLINE | ID: mdl-18382502

ABSTRACT

We demonstrate 1500 nm band single-photon detection with low dark-count noise and a potentially high efficiency, which may allow long distance and high-bit-rate quantum key distribution. By developing frequency upconversion devices based on periodically poled lithium niobate waveguides, which are specifically designed to use a pump wavelength longer than that of communication-band photons, we completely eliminate the dark-count noise caused by parasitic nonlinear processes in the waveguide. We observed an internal conversion efficiency as high as 40% and demonstrated scaling down to the single photon level while maintaining a background dark-count rate of 10(2)s(-1).

8.
Opt Lett ; 32(9): 1129-31, 2007 May 01.
Article in English | MEDLINE | ID: mdl-17410258

ABSTRACT

We achieved apodization in a quasi-phase-matched wavelength converter. The new design yields a large bandwidth and a flat phase-matching response with a high conversion efficiency. Using the method, we demonstrate widely tunable 3.4 microm band difference frequency generation in a LiNbO3 ridge waveguide.

SELECTION OF CITATIONS
SEARCH DETAIL