A glycoporphyrin story: from chemistry to PDT treatment of cancer mouse models.

Photodynamic therapy (PDT) represents a non-toxic and non-mutagenic antitumor therapy. The photosensitizer's (PS) chemo-physical properties are essential for the therapy, being responsible for the biological effects induced in the targeted tissues. In this study, we present the synthesis and development of some glycoconjugated porphyrins based on lectin-type receptor interaction. They were tested in vitro for finally choosing the most effective chemical structure for an optimum antitumor outcome. The most effective photosensitizer is substituted by three diethylene glycol α-d-mannosyl groups. In vivo studies allow firstly the determination of some characteristics of the biological processes triggered by the initial photochemical activation. Secondly, they make it possible to improve the therapeutic protocol in the function of the structural architecture of the targeted tumor tissue.

Ultrananocrystalline diamond-CMOS device integration route for high acuity retinal prostheses.

High density electrodes are a new frontier for biomedical implants. Increasing the density and the number of electrodes used for the stimulation of retinal ganglion cells is one possible strategy for enhancing the quality of vision experienced by patients using retinal prostheses. The present work presents an integration strategy for a diamond based, high density, stimulating electrode array with a purpose built application specific integrated circuit (ASIC). The strategy is centered on flip-chip bonding of indium bumps to create high count and density vertical interconnects between the stimulator ASIC and an array of diamond neural stimulating electrodes. The use of polydimethylsiloxane (PDMS) housing prevents cross-contamination of the biocompatible diamond electrode with non-biocompatible materials, such as indium, used in the microfabrication process. Micro-imprint lithography allowed edge-to-edge micro-scale pattering of the indium bumps on non-coplanar substrates that have a form factor that can conform to body organs and thus are ideally suited for biomedical applications. Furthermore, micro-imprint lithography ensures the compatibility of lithography with the silicon ASIC and aluminum contact pads. Although this work focuses on 256 stimulating diamond electrode arrays with a pitch of 150 µm, the use of indium bump bonding technology and vertical interconnects facilitates implants with tens of thousands electrodes with a pitch as low as 10 µm, thus ensuring validity of the strategy for future high acuity retinal prostheses, and bionic implants in general.

Lack of Association of Vascular Risk Factors with HIV-Associated Neurocognitive Disorders in cART-Treated Adults Aged ≥ 50 Years in Tanzania.

HIV-associated neurocognitive disorders (HAND) are highly prevalent in those ageing with HIV. High-income country data suggest that vascular risk factors (VRFs) may be stronger predictors of HAND than HIV-disease severity, but data from sub-Saharan Africa are lacking. We evaluated relationships of VRFs, vascular end-organ damage and HAND in individuals aged ≥ 50 in Tanzania. c-ART-treated individuals were assessed for HAND using consensus criteria. The prevalence of VRFs and end organ damage markers were measured. The independent associations of VRFs, end organ damage and HAND were examined using multivariable logistic regression. Data were available for 153 individuals (median age 56, 67.3% female). HAND was highly prevalent (66.7%, 25.5% symptomatic) despite well-managed HIV (70.5% virally suppressed). Vascular risk factors included hypertension (34%), obesity (10.5%), hypercholesterolemia (33.3%), diabetes (5.3%) and current smoking (4.6%). End organ damage prevalence ranged from 1.3% (prior myocardial infarction) to 12.5% (left ventricular hypertrophy). Measured VRFs and end organ damage were not independently associated with HAND. The only significant association was lower diastolic BP (p 0.030, OR 0.969 (0.943-0.997). Our results suggest that vascular risk factors are not major drivers of HAND in this setting. Further studies should explore alternative aetiologies such as chronic inflammation.

A survey on knowledge of female genital mutilation guidelines.

The increase in immigration from countries with a high prevalence of female genital mutilation (FGM) has highlighted the need for knowledge and sensitivity in this area of healthcare in high-resource countries. We have surveyed with an online questionnaire 607 members, fellows and trainees of the Royal College of Obstetricians and Gynaecologists (RCOG) on knowledge about the RCOG guidelines for FGM. Completed training and more practical experience with women affected by FGM significantly increased knowledge. Many respondents were not aware of specialist services locally (22.9%) or how to access them (52.3%). Some areas of insufficient knowledge were identified, in particular in relation to psychiatric morbidity, HIV, hepatitis B and pelvic infection. More specialized training efforts might improve this aspect.

RepD-mediated recruitment of PcrA helicase at the Staphylococcus aureus pC221 plasmid replication origin, oriD.

Plasmid encoded replication initiation (Rep) proteins recruit host helicases to plasmid replication origins. Previously, we showed that RepD recruits directionally the PcrA helicase to the pC221 oriD, remains associated with it, and increases its processivity during plasmid unwinding. Here we show that RepD forms a complex extending upstream and downstream of the core oriD. Binding of RepD causes remodelling of a region upstream from the core oriD forming a 'landing pad' for the PcrA. PcrA is recruited by this extended RepD-DNA complex via an interaction with RepD at this upstream site. PcrA appears to have weak affinity for this region even in the absence of RepD. Upon binding of ADPNP (non-hydrolysable analogue of ATP), by PcrA, a conformational rearrangement of the RepD-PcrA-ATP initiation complex confines it strictly within the boundaries of the core oriD. We conclude that RepD-mediated recruitment of PcrA at oriD is a three step process. First, an extended RepD-oriD complex includes a region upstream from the core oriD; second, the PcrA is recruited to this upstream region and thirdly upon ATP-binding PcrA relocates within the core oriD.

Visualization of 3D osteon morphology by synchrotron radiation micro-CT.

Cortical bone histology has been the subject of scientific inquiry since the advent of the earliest microscopes. Histology - literally the study of tissue - is a field nearly synonymous with 2D thin sections. That said, progressive developments in high-resolution X-ray imaging are enabling 3D visualization to reach ever smaller structures. Micro-computed tomography (micro-CT), employing conventional X-ray sources, has become the gold standard for 3D analysis of trabecular bone and is capable of detecting the structure of vascular (osteonal) porosity in cortical bone. To date, however, direct 3D visualization of secondary osteons has eluded micro-CT based upon absorption-derived contrast. Synchrotron radiation micro-CT, through greater image quality, resolution and alternative contrast mechanisms (e.g. phase contrast), holds great potential for non-destructive 3D visualization of secondary osteons. Our objective was to demonstrate this potential and to discuss areas of bone research that can be advanced through the application of this approach. We imaged human mid-femoral cortical bone specimens derived from a 20-year-old male (Melbourne Femur Collection) at the Advanced Photon Source synchrotron (Chicago, IL, USA) using the 2BM beam line. A 60-mm distance between the target and the detector was employed to enhance visualization of internal structures through propagation phase contrast. Scan times were 1 h and images were acquired with 1.4-µm nominal isotropic resolution. Computer-aided manual segmentation and volumetric 3D rendering were employed to visualize secondary osteons and porous structures, respectively. Osteonal borders were evident via two contrast mechanisms. First, relatively new (hypomineralized) osteons were evident due to differences in X-ray attenuation relative to the surrounding bone. Second, osteon boundaries (cement lines) were delineated by phase contrast. Phase contrast also enabled the detection of soft tissue remnants within the vascular pores. The ability to discern osteon boundaries in conjunction with vascular and cellular porosity revealed a number of secondary osteon morphologies and provided a unique 3D perspective of the superimposition of secondary osteons on existing structures. Improvements in resolution and optimization of the propagation phase contrast promise to provide further improvements in structural detail in the future.

Bonding to glass ionomer cements using resin-based adhesives.

OBJECTIVE: This study compared the microshear bond strengths (MSBS) of four self-etching adhesives (Adper Scotchbond SE [SSE], Clearfil SE Bond [CSE], Clearfil S3 Bond [CS3] and One Coat 7.0 [OC]) and an etch-and-rinse adhesive (Adper Single Bond Plus [SB]) when bonded to two conventional glass ionomer cements (GICs) (Fuji IX GP EXTRA and Riva Self Cure). The null hypothesis tested was there is no difference in the adhesive ability of an etch-and-rinse adhesive and self-etching adhesives when bonded to GIC for up to 6 months. METHODS: The GICs were embedded in type III dental stone and wet ground with 1200-grit SiC paper. Twenty specimens were bonded for each adhesive according to manufacturers' instructions with a 1.5-mm bonding diameter. Specimens were stored at 100% humidity for 24 hours, 1 month, or 6 months. Microshear bond strengths were obtained using a crosshead speed of 1 mm/min. The results were calculated and analyzed using analysis of variance (ANOVA) and Tukey HSD test. RESULTS: SB had significantly lower MSBS than the four self-etching adhesives for all storage periods. MSBS at 6 months for SB was significantly lower than at 1 month. There were no significant differences in MSBS among the self-etching adhesives. Cohesive failure within GIC was the most common failure mode observed. CONCLUSIONS: SB showed a lower bond strength than the self-etching adhesives when bonded to conventional GICs for all storage periods. This might be a result of the phosphoric acid etching. However, cohesive strength of GIC was a limiting factor for the MSBS outcomes.

Relating age and micro-architecture with apparent-level elastic constants: a micro-finite element study of female cortical bone from the anterior femoral midshaft.

Homogenized elastic properties are often assumed for macro-finite element (FE) models used in orthopaedic biomechanics. The accuracy of material property assignments may have a strong effect on the ability of these models to make accurate predictions. For cortical bone, most macro-scale FE models assume isotropic elastic material behaviour and do not include variation of material properties due to bone micro-architecture. The first aim of the present study was to evaluate the variation of apparent-level (homogenized) orthotropic elastic constants of cortical bone with age and indices of bone micro-architecture. Considerable age-dependent differences in porosity were noted across the cortical thickness in previous research. The second aim of the study was to quantify the resulting differences in elastic constants between the periosteum and endosteum. Specimens were taken from the anterior femoral midshaft of 27 female donors (age 53.4 +/- 23.6 years) and micro-FE (gFE) analysis was used to derive orthotropic elastic constants. The variation of orthotropic elastic constants (Young's moduli, shear moduli, and Poisson's ratios) with various cortical bone micro-architectural indices was investigated. The ratio of canal volume to tissue volume, Ca.V/TV, analogous to porosity, was found to be the strongest predictor (r2(ave) = 0.958) of the elastic constants. Age was less predictive (r2(ave) = 0.385) than Ca.V/TV. Elastic anisotropy increased with increasing Ca.V/TV, leading to lower elastic moduli in the transverse, typically less frequently loaded, directions. Increased Ca.V/TV led to a more substantial reduction in elastic constants at the endosteal aspect than at the periosteal aspect. The results are expected to be most applicable in similar midshaft locations of long bones; specific analysis of other sites would be necessary to evaluate elastic properties elsewhere. It was concluded that Ca.V/TV was the most predictive of cortical bone elastic constants and that considerable periosteal-endosteal variations in these constants can develop with bone loss.

[Towards a new treatment of retinoblastoma?]. / Vers un nouveau traitement du rétinoblastome ?

Photodynamic therapy (PDT) is a recent approach for the treatment of small cancerous tumours, on-surface or accessible by endoscopy in which a dye (usually a tetrapyrrolic macrocycle) absorbs light and generates cytotoxic reactive oxygen species leading to cellular damage. Retinoblastoma (Rb) is a rare intraocular tumour of childhood. All the multifocal forms are hereditary and constitute a syndrome of genetic predisposition in the cancer. The current treatments with etoposide or carboplatine expose the patient to the late risk of second cancer. The use of PDT as cancer therapy is particularly attractive due to the use of few mutagenic and non-toxic photosensitizers (PS) prior light excitation and to the localized tumour illumination. The photoefficiency towards Rb of a glycoconjugated porphyrin is discussed and compared with the results obtained with a second-generation photosensitizer, the Foscan. Some in vivo results on an animal model of Rb are presented by a point of view of photoefficiency, biodistribution, pharmacokinetic and longitudinal follow-up of the PDT effect using a new non-invasive method of magnetic resonance imaging of real-time. Photodynamic treatments in association with non-invasive sodium imaging open ways for new treatment tailoring or treatment individualization of retinoblastoma in clinic.

Biomechanical testing of the calcified metacarpal articular surface and its association with subchondral bone microstructure in Thoroughbred racehorses.

BACKGROUND: Palmar/plantar osteochondral disease (POD) and third metacarpal/-tarsal condylar fractures are considered fatigue injuries of subchondral bone (SCB) and calcified cartilage due to repetitive high loads in racehorses. In combination with adaptive changes in SCB in response to race training, the accumulation of SCB fatigue is likely to result in changes of joint surface mechanical properties. OBJECTIVES: To determine the spatial relationship and correlation of calcified articular surface biomechanical properties with SCB microstructure and training history in the distal palmar metacarpal condyle of Thoroughbred racehorses. STUDY DESIGN: Cross-sectional study. METHODS: Third metacarpal condyles were examined from 31 Thoroughbred horses with micro-computed tomography (microCT). Hyaline cartilage was removed and reference point indentation (RPI) mechanical testing of the calcified articular surface was performed. Training histories were obtained from trainers. The association among indentation distance increase (IDI, an inverse RPI measure of toughness), and microCT and training variables was assessed using a mixed-effects generalised linear model. RESULTS: Untrained horses had higher IDI than horses that had commenced training (P<0.001). Death as a result of musculoskeletal bone fatigue injury (P = 0.044) and presence of POD (P = 0.05) were associated with higher IDI. The microCT variables connectivity density and trabecular pattern factor were positively (P = 0.002) and negatively (P<0.001) correlated with IDI respectively. MAIN LIMITATIONS: The application of RPI to the calcified articular surface is novel and there is a potential for measurement variability with surface unevenness. CONCLUSION: Commencement of race training is associated with altered material properties of the calcified articular surface in horses. Reduced articular surface material properties can also be detected in horses that have fatigue injuries of the distal metacarpus and at other sites in the skeleton. Measures of SCB connectivity and trabecular surface shape may be more important determinants of resistance to failure of the calcified articular surface than traditional measures such as SCB volume and density.

Lacunar-canalicular network in femoral cortical bone is reduced in aged women and is predominantly due to a loss of canalicular porosity.

The lacunar-canalicular network (LCN) of bone contains osteocytes and their dendritic extensions, which allow for intercellular communication, and are believed to serve as the mechanosensors that coordinate the processes of bone modeling and remodeling. Imbalances in remodeling, for example, are linked to bone disease, including fragility associated with aging. We have reported that there is a reduction in scale for one component of the LCN, osteocyte lacunar volume, across the human lifespan in females. In the present study, we explore the hypothesis that canalicular porosity also declines with age. To visualize the LCN and to determine how its components are altered with aging, we examined samples from young (age: 20-23 y; n = 5) and aged (age: 70-86 y; n = 6) healthy women donors utilizing a fluorescent labelling technique in combination with confocal laser scanning microscopy. A large cross-sectional area of cortical bone spanning the endosteal to periosteal surfaces from the anterior proximal femoral shaft was examined in order to account for potential trans-cortical variation in the LCN. Overall, we found that LCN areal fraction was reduced by 40.6% in the samples from aged women. This reduction was due, in part, to a reduction in lacunar density (21.4% decline in lacunae number per given area of bone), but much more so due to a 44.6% decline in canalicular areal fraction. While the areal fraction of larger vascular canals was higher in endosteal vs. periosteal regions for both age groups, no regional differences were observed in the areal fractions of the LCN and its components for either age group. Our data indicate that the LCN is diminished in aged women, and is largely due to a decline in the canalicular areal fraction, and that, unlike vascular canal porosity, this diminished LCN is uniform across the cortex.

Construction and use of facial archetypes in anthropology and syndrome diagnosis.

This paper describes the benefits of moving from recording simple Euclidian distances and angles between landmarks on the face to full three-dimensional visualisation and mapping using modern optical scanning techniques. Pilot experiments are reported on that strive to create facial archetypes which are accurately descriptive of various cohorts of people. Issues considered include variation amongst people of the same sex, age and population-of-origin. The study has discovered that very few people are needed to construct an "average" face, which is measurably indistinguishable from another average constructed using the faces of other people from within the group studied. This discovery has given the researchers confidence in the reliability of the archetypes which they have produced and this is important if such an analytical technique is to find application in discriminating between peoples on a population basis and in syndrome diagnosis.

A mechanostatistical approach to cortical bone remodelling: an equine model.

In this study, the development of a mechanostatistical model of three-dimensional cortical bone remodelling informed with in vivo equine data is presented. The equine model was chosen as it is highly translational to the human condition due to similar Haversian systems, availability of in vivo bone strain and biomarker data, and furthermore, equine models are recommended by the US Federal Drugs Administration for comparative joint research. The model was derived from micro-computed tomography imaged specimens taken from the equine third metacarpal bone, and the Frost-based 'mechanostat' was informed from both in vivo strain gauges and biomarkers to estimate bone growth rates. The model also described the well-known 'cutting cone' phenomena where Haversian canals tunnel and replace bone. In order to make this model useful in practice, a partial least squares regression (PLSR) surrogate model was derived based on training data from finite element simulations with different loads. The PLSR model was able to predict microstructure and homogenised Young's modulus with errors less than 2.2% and 0.6%, respectively.

Determination of sequence specificity between a plasmid replication initiator protein and the origin of replication.

Staphylococcal plasmids of the pT181 family replicate by a rolling circle mechanism, requiring the activities of a plasmid-specified Rep protein. The initiation event involves site-specific phosphodiester bond cleavage by Rep within the replication origin, ori. In vitro the Rep proteins also display type-I topoisomerase activity specific for this plasmid family. Although the single site of bond cleavage, ICR II, is conserved among all members of the pT181 family, the plasmid-specific Rep proteins are able to discriminate between family members in vivo, initiating replication only from the cognate origin. The basis of such specificity is believed to be due to a non-covalent binding interaction between Rep and a DNA sequence adjacent to the site of phosphodiester bond cleavage. Using the RepD protein specified by plasmid pC221, we present data for the physical parameters of RepD:oriD complex formation. Quantification of the relative strengths of the non-covalent interactions for different but related ori target sequences, measured by gel mobility shift experiments, has yielded data that are in accord with the known specificity of the protein in vivo. Oligonucleotide competition experiments demonstrate that this interaction is indeed attributable to the specificity determinant, ICR III. Protein-DNA crosslinking methods show that a carboxyl-terminal proteolytic fragment of RepD makes a specific interaction with the ICR III region of its cognate replication origin. Analysis of topoisomerase rates indicates that the interaction between ICR III and the carboxyl terminus of the protein is required before a productive interaction, namely the phosphodiester bond cleavage at the ICR II, can occur.

The significance of at-risk factors in ultrasound surveillance of developmental dysplasia of the hip. A ten-year prospective study.

Of the 34,723 infants born between 1 June 1992 and 31 May 2002, the hips of 2578 with clinical instability or at-risk factors for developmental dysplasia of the hip were imaged by ultrasound. Instability of the hip was present in 77 patients, of whom only 24 (31.2%) had an associated risk factor. From the 'at-risk' groups, the overall risk of type-III dysplasia, instability and irreducibility was 1:15 when family history, 1:27 when breech delivery and 1:33 when foot deformity were considered as risk factors. Of those hips which were ultrasonographically stable, 88 had type-III dysplasia. A national programme of selective ultrasound screening of at-risk factors for the diagnosis of hip dislocation or instability alone cannot be recommended because of its low predictive value (1:88). However, the incidence of type-III dysplasia and hip dislocation or dislocatability in the groups with clinical instability, family history, breech position and possibly postural foot deformity as risk factors could justify a programme of selective ultrasound imaging.

The relationship between porosity and specific surface in human cortical bone is subject specific.

A characteristic relationship for bone between bone volume fraction (BV/TV) and specific surface (BS/TV) has previously been proposed based on 2D histological measurements. This relationship has been suggested to be bone intrinsic, i.e., to not depend on bone type, bone site and health state. In these studies, only limited data comes from cortical bone. The aim of this paper was to investigate the relationship between BV/TV and BS/TV in human cortical bone using high-resolution micro-CT imaging and the correlations with subject-specific biometric data such as height, weight, age and sex. Images from femoral cortical bone samples of the Melbourne Femur Collection were obtained using synchrotron radiation micro-CT (SPring8, Japan). Sixteen bone samples from thirteen individuals were analysed in order to find bone volume fraction values ranging from 0.20 to 1. Finally, morphological models of the tissue microstructure were developed to help explain the relationship between BV/TV and BS/TV. Our experimental findings indicate that the BV/TV vs BS/TV relationship is subject specific rather than intrinsic. Sex and pore density were statistically correlated with the individual curves. However no correlation was found with body height, weight or age. Experimental cortical data points deviate from interpolating curves previously proposed in the literature. However, these curves are largely based on data points from trabecular bone samples. This finding challenges the universality of the curve: highly porous cortical bone is significantly different to trabecular bone of the same porosity. Finally, our morphological models suggest that changes in BV/TV within the same sample can be explained by an increase in pore area rather than in pore density. This is consistent with the proposed mechanisms of age-related endocortical bone loss. In addition, these morphological models highlight that the relationship between BV/TV and BS/TV is not linear at high BV/TV as suggested in the literature but is closer to a square root function.

An automated analysis of intracortical porosity in human femoral bone across age.

The matrix of human cortical bone is arranged around a network of vascular spaces (hereafter referred to as "pores"). Our aim was to investigate age-related differences in human cortical porosity (total pore area divided by cortical bone area), pore size and number, and surface to volume ratios, while adjusting for sex, height, and weight. Ninety-six specimens of entire transverse sections of human femoral diaphysis, from subjects aged 21-92 years, were examined. We used our established automated image acquisition and analysis system which measures pores from entire sections of multiple specimens of bone. Over 400,000 pores were recorded. Results showed a greater porosity in older bone (p < 0.01) but marked variation in porosity for any given age. The cohort median, of the specimen medians, of pore cross-sectional area was 2050 microns 2. Older specimens did not have more pores than younger specimens but had a greater proportion of larger pores (p < 0.05) and greater intraspecimen variation in pore size (p < 0.001). The pore surface to bone matrix volume ratio was a median 2.3 mm2/mm3. This varied more than 4-fold between individuals but did not relate to age. No simple relationships were found between any of the measured parameters and either sex, height, or weight, even after adjustment for age. We conclude that the greater porosity in older specimens is due to greater pore size rather than a larger number of pores. Age, however, explains little of the inter-individual variation in the parameters studied.

Controlled high-level expression of the lon gene of Escherichia coli allows overproduction of Lon protease.

Lon protease from Escherichia coli is an ATP-dependent protease which plays important roles in regulating the levels of specific proteins and in eliminating abnormal proteins. A major problem of working with Lon protease, the inability to substantially overproduce the enzyme, has been overcome by placing the lon gene under the control of an inducible trp promoter within a copy-number-controllable plasmid. Induction resulted in higher levels of production of the protease (approximately 100 micrograms/ml of cell culture) than were previously possible. The enzyme has been purified to apparent homogeneity and shown to possess the characteristic ATP-dependent proteolytic activity. Sequence verification during DNA manipulations revealed differences from two previously published sequences for the lon gene.

Nutrient balance and energy expenditure during ad libitum feeding of high-fat and high-carbohydrate diets in humans.

To study the influence of diet composition on regulation of body weight, we fed 21 weight-stable subjects (11 lean, 10 obese) high-carbohydrate (HC) and high-fat (HF) diets for 1 wk each. Although diet composition was fixed, total energy intake was unrestricted. Subjects had a higher energy intake on the HF (11,039 +/- 2700 kJ/d) than on the HC (10,672 +/- 2617 kJ/d) diet (P less than 0.05), but energy expenditure was not different between diets. On day 7 of the HC diet, carbohydrate (CHO) oxidation was significantly related to CHO intake with the slope of the regression line 0.99, suggesting that overall CHO balance was near zero. However, the slope of the regression line was greater for obese than for lean subjects. On day 7 of the HF diet, fat oxidation was significantly related to fat intake but the slope of the line was 0.50, suggesting that overall fat balance was positive. However, this relationship was due entirely to lean subjects, with obese subjects showing no relationship between fat intake and oxidation.

Dispersal and extinction in fragmented landscapes.

Evolutionary and population dynamics models suggest that the migration rate will affect the probability of survival in fragmented landscapes. Using data for butterfly species in the fragmented British landscape and in immediately adjoining areas of the European continent, this paper shows that species of intermediate mobility have declined most, followed by those of low mobility, whereas high-mobility species are generally surviving well. Compared to the more sedentary species, species of intermediate mobility require relatively large areas where they breed at slightly lower local densities. Intermediate mobility species have probably fared badly through a combination of metapopulation (extinction and colonization) dynamics and the mortality of migrating individuals which fail to find new habitats in fragmented landscapes. Habitat fragmentation is likely to result in the non-random extinction of populations and species characterized by different levels of dispersal, although the details are likely to depend on the taxa, habitats and regions considered.