ABSTRACT
Two-dimensional (2D) materials1-5 offer a unique platform from which to explore the physics of topology and many-body phenomena. New properties can be generated by filling the van der Waals gap of 2D materials with intercalants6,7; however, post-growth intercalation has usually been limited to alkali metals8-10. Here we show that the self-intercalation of native atoms11,12 into bilayer transition metal dichalcogenides during growth generates a class of ultrathin, covalently bonded materials, which we name ic-2D. The stoichiometry of these materials is defined by periodic occupancy patterns of the octahedral vacancy sites in the van der Waals gap, and their properties can be tuned by varying the coverage and the spatial arrangement of the filled sites7,13. By performing growth under high metal chemical potential14,15 we can access a range of tantalum-intercalated TaS(Se)y, including 25% Ta-intercalated Ta9S16, 33.3% Ta-intercalated Ta7S12, 50% Ta-intercalated Ta10S16, 66.7% Ta-intercalated Ta8Se12 (which forms a Kagome lattice) and 100% Ta-intercalated Ta9Se12. Ferromagnetic order was detected in some of these intercalated phases. We also demonstrate that self-intercalated V11S16, In11Se16 and FexTey can be grown under metal-rich conditions. Our work establishes self-intercalation as an approach through which to grow a new class of 2D materials with stoichiometry- or composition-dependent properties.
ABSTRACT
The Bethe-Salpeter equation (BSE) can provide an accurate description of low-energy optical spectra of insulating crystals-even when excitonic effects are important. However, due to high computational costs it is only possible to include a few bands in the BSE Hamiltonian. As a consequence, the dielectric screening given by the real part of the dielectric function can be significantly underestimated by the BSE. Here, we show that universally accurate optical response functions can be obtained by combining a four-point BSE-like equation for the irreducible polarizability with a two-point Dyson equation that includes the higher-lying transitions within the random phase approximation. The new method is referred to as BSE+. It has a computational cost comparable to the BSE but a much faster convergence with respect to the size of the electron-hole basis. We use the method to calculate refractive indices and electron energy loss spectra for a test set of semiconductors and insulators. In all cases the BSE+ yields excellent agreement with experimental data across a wide frequency range and outperforms both the BSE and the random phase approximation.
ABSTRACT
We review the GPAW open-source Python package for electronic structure calculations. GPAW is based on the projector-augmented wave method and can solve the self-consistent density functional theory (DFT) equations using three different wave-function representations, namely real-space grids, plane waves, and numerical atomic orbitals. The three representations are complementary and mutually independent and can be connected by transformations via the real-space grid. This multi-basis feature renders GPAW highly versatile and unique among similar codes. By virtue of its modular structure, the GPAW code constitutes an ideal platform for the implementation of new features and methodologies. Moreover, it is well integrated with the Atomic Simulation Environment (ASE), providing a flexible and dynamic user interface. In addition to ground-state DFT calculations, GPAW supports many-body GW band structures, optical excitations from the Bethe-Salpeter Equation, variational calculations of excited states in molecules and solids via direct optimization, and real-time propagation of the Kohn-Sham equations within time-dependent DFT. A range of more advanced methods to describe magnetic excitations and non-collinear magnetism in solids are also now available. In addition, GPAW can calculate non-linear optical tensors of solids, charged crystal point defects, and much more. Recently, support for graphics processing unit (GPU) acceleration has been achieved with minor modifications to the GPAW code thanks to the CuPy library. We end the review with an outlook, describing some future plans for GPAW.
ABSTRACT
Independent control of carrier density and out-of-plane displacement field is essential for accessing novel phenomena in two-dimensional (2D) material heterostructures. While this is achieved with independent top and bottom metallic gate electrodes in transport experiments, it remains a challenge for near-field optical studies as the top electrode interferes with the optical path. Here, we characterize the requirements for a material to be used as the top-gate electrode and demonstrate experimentally that few-layer WSe2 can be used as a transparent, ambipolar top-gate electrode in infrared near-field microscopy. We carry out nanoimaging of plasmons in a bilayer graphene heterostructure tuning the plasmon wavelength using a trilayer WSe2 gate, achieving a density modulation amplitude exceeding 2 × 1012 cm-2. The observed ambipolar gate-voltage response allows us to extract the energy gap of WSe2, yielding a value of 1.05 eV. Our results provide an additional tuning knob to cryogenic near-field experiments on emerging phenomena in 2D materials and moiré heterostructures.
ABSTRACT
BACKGROUND: In the ISCHEMIA trial (International Study of Comparative Health Effectiveness with Medical and Invasive Approaches), an initial invasive strategy did not significantly reduce rates of cardiovascular events or all-cause mortality in comparison with a conservative strategy in patients with stable ischemic heart disease and moderate/severe myocardial ischemia. The most frequent component of composite cardiovascular end points was myocardial infarction (MI). METHODS: ISCHEMIA prespecified that the primary and major secondary composite end points of the trial be analyzed using 2 MI definitions. For procedural MI, the primary MI definition used creatine kinase-MB as the preferred biomarker, whereas the secondary definition used cardiac troponin. Procedural thresholds were >5 times the upper reference level for percutaneous coronary intervention and >10 times for coronary artery bypass grafting. Procedural MI definitions included (1) a category of elevated biomarker only events with much higher biomarker thresholds, (2) new ST-segment depression of ≥1 mm for the primary and ≥0.5 mm for the secondary definition, and (3) new coronary dissections >National Heart, Lung, and Blood Institute grade 3. We compared MI type, frequency, and prognosis by treatment assignment using both MI definitions. RESULTS: Procedural MIs accounted for 20.1% of all MI events with the primary definition and 40.6% of all MI events with the secondary definition. Four-year MI rates in patients undergoing revascularization were more frequent with the invasive versus conservative strategy using the primary (2.7% versus 1.1%; adjusted hazard ratio [HR], 2.98 [95% CI, 1.87-4.73]) and secondary (8.2% versus 2.0%; adjusted HR, 5.04 [95% CI, 3.64-6.97]) MI definitions. Type 1 MIs were less frequent with the invasive versus conservative strategy using the primary (3.40% versus 6.89%; adjusted HR, 0.53 [95% CI, 0.41-0.69]; P<0.0001) and secondary (3.48% versus 6.89%; adjusted HR, 0.53 [95% CI, 0.41-0.69]; P<0.0001) definitions. The risk of subsequent cardiovascular death was higher after a type 1 MI than after no MI using the primary (adjusted HR, 3.38 [95% CI, 2.03-5.61]; P<0.001) or secondary MI definition (adjusted HR, 3.52 [2.11-5.88]; P<0.001). CONCLUSIONS: In ISCHEMIA, type 1 MI events using the primary and secondary definitions during 5-year follow-up were more frequent with an initial conservative strategy and associated with subsequent cardiovascular death. Procedural MI rates were greater in the invasive strategy and with the use of the secondary MI definition. Registration: URL: https://www.clinicaltrials.gov; Unique identifier: NCT01471522.
Subject(s)
Coronary Artery Bypass/adverse effects , Myocardial Infarction/pathology , Percutaneous Coronary Intervention/adverse effects , Aged , Aged, 80 and over , Creatine Kinase, MB Form/blood , Female , Follow-Up Studies , Humans , Incidence , Male , Middle Aged , Myocardial Infarction/epidemiology , Myocardial Infarction/mortality , Myocardial Ischemia/therapy , Prognosis , Proportional Hazards Models , Risk Factors , Severity of Illness Index , Survival AnalysisABSTRACT
Discovery of high-performance materials remains one of the most active areas in photovoltaics (PV) research. Indirect band gap materials form the largest part of the semiconductor chemical space, but predicting their suitability for PV applications from first-principles calculations remains challenging. Here, we propose a computationally efficient method to account for phonon-assisted absorption across the indirect band gap and use it to screen 127 experimentally known binary semiconductors for their potential as thin-film PV absorbers. Using screening descriptors for absorption, carrier transport, and nonradiative recombination, we identify 28 potential candidate materials. The list, which contains 20 indirect band gap semiconductors, comprises well-established (3), emerging (16), and previously unexplored (9) absorber materials. Most of the new compounds are anion-rich chalcogenides (TiS3 and Ga2Te5) and phosphides (PdP2, CdP4, MgP4, and BaP3) containing homoelemental bonds and represent a new frontier in PV materials research. Our work highlights the previously underexplored potential of indirect band gap materials for optoelectronic thin-film technologies.
ABSTRACT
PURPOSE: This review intends to illustrate basic principles on how to apply the Fourth Universal Definition of Myocardial Infarction (UDMI) for the diagnosis of peri-procedural myocardial infarction (MI) after percutaneous coronary interventions (PCI) in clinical practice. METHODS AND RESULTS: Review of routine case-based events. Increases in cardiac troponin (cTn) concentrations are common after elective PCI in patients with chronic coronary syndrome (CCS). Peri-procedural PCI-related MI (type 4a MI) in CCS patients should be diagnosed in cases of major peri-procedural acute myocardial injury indicated by an increase in cTn concentrations of >5-times the 99th percentile upper reference limit (URL) together with evidence of new peri-procedural myocardial ischaemia as demonstrated by electrocardiography (ECG), imaging, or flow-limiting peri-procedural complications in coronary angiography. Measurement of cTn baseline concentrations before elective PCI is useful. In patients presenting with acute MI undergoing PCI, peri-procedural increases in cTn concentrations are usually due to their index presentation and not PCI-related, apart from obvious major peri-procedural complications, such as persistent occlusion of a large side branch or no-reflow after stent implantation. CONCLUSION: The distinction between type 4a MI, PCI-related acute myocardial injury, and chronic myocardial injury can be challenging in individuals undergoing PCI. Careful integration of all available clinical data is essential for correct classification.
Subject(s)
Cardiology , Myocardial Infarction , Percutaneous Coronary Intervention , Biomarkers , Coronary Angiography/adverse effects , Humans , Myocardial Infarction/diagnosis , Myocardial Infarction/etiology , Myocardial Infarction/therapy , Percutaneous Coronary Intervention/adverse effectsABSTRACT
AIMS: The prognostic importance of cardiac procedural myocardial injury and myocardial infarction (MI) in chronic coronary syndrome (CCS) patients undergoing elective percutaneous coronary intervention (PCI) is still debated. METHODS AND RESULTS: We analysed individual data of 9081 patients undergoing elective PCI with normal pre-PCI baseline cardiac troponin (cTn) levels. Multivariate models evaluated the association between post-PCI elevations in cTn and 1-year mortality, while an interval analysis evaluated the impact of the size of the myocardial injury on mortality. Our analysis was performed in the overall population and also according to the type of cTn used [52.0% had high-sensitivity cTn (hs-cTn)]. Procedural myocardial injury, as defined by the Fourth Universal Definition of MI (UDMI) [post-PCI cTn elevation ≥1 × 99th percentile upper reference limit (URL)], occurred in 52.8% of patients and was not associated with 1-year mortality [adj odds ratio (OR), 1.35, 95% confidence interval (CI) (0.84-1.77), P = 0.21]. The association between post-PCI cTn elevation and 1-year mortality was significant starting ≥3 × 99th percentile URL. Major myocardial injury defined by post-PCI ≥5 × 99th percentile URL occurred in 18.2% of patients and was associated with a two-fold increase in the adjusted odds of 1-year mortality [2.29, 95% CI (1.32-3.97), P = 0.004]. In the subset of patients for whom periprocedural evidence of ischaemia was collected (n = 2316), Type 4a MI defined by the Fourth UDMI occurred in 12.7% of patients and was strongly associated with 1-year mortality [adj OR 3.21, 95% CI (1.42-7.27), P = 0.005]. We also present our results according to the type of troponin used (hs-cTn or conventional troponin). CONCLUSION: Our analysis has demonstrated that in CCS patients with normal baseline cTn levels, the post-PCI cTn elevation of ≥5 × 99th percentile URL used to define Type 4a MI is associated with 1-year mortality and could be used to detect 'major' procedural myocardial injury in the absence of procedural complications or evidence of new myocardial ischaemia.
Subject(s)
Coronary Artery Disease , Myocardial Infarction , Percutaneous Coronary Intervention , Biomarkers , Humans , Percutaneous Coronary Intervention/adverse effects , TroponinABSTRACT
A substantial number of chronic coronary syndrome (CCS) patients undergoing percutaneous coronary intervention (PCI) experience periprocedural myocardial injury or infarction. Accurate diagnosis of these PCI-related complications is required to guide further management given that their occurrence may be associated with increased risk of major adverse cardiac events (MACE). Due to lack of scientific data, the cut-off thresholds of post-PCI cardiac troponin (cTn) elevation used for defining periprocedural myocardial injury and infarction, have been selected based on expert consensus opinions, and their prognostic relevance remains unclear. In this Consensus Document from the ESC Working Group on Cellular Biology of the Heart and European Association of Percutaneous Cardiovascular Interventions (EAPCI), we recommend, whenever possible, the measurement of baseline (pre-PCI) cTn and post-PCI cTn values in all CCS patients undergoing PCI. We confirm the prognostic relevance of the post-PCI cTn elevation >5× 99th percentile URL threshold used to define type 4a myocardial infarction (MI). In the absence of periprocedural angiographic flow-limiting complications or electrocardiogram (ECG) and imaging evidence of new myocardial ischaemia, we propose the same post-PCI cTn cut-off threshold (>5× 99th percentile URL) be used to define prognostically relevant 'major' periprocedural myocardial injury. As both type 4a MI and major periprocedural myocardial injury are strong independent predictors of all-cause mortality at 1 year post-PCI, they may be used as quality metrics and surrogate endpoints for clinical trials. Further research is needed to evaluate treatment strategies for reducing the risk of major periprocedural myocardial injury, type 4a MI, and MACE in CCS patients undergoing PCI.
Subject(s)
Coronary Artery Disease , Heart Injuries , Myocardial Infarction , Percutaneous Coronary Intervention , Biomarkers , Consensus , Humans , Myocardial Infarction/etiology , Percutaneous Coronary Intervention/adverse effects , Risk Factors , Treatment OutcomeABSTRACT
Purpose: The Fourth Universal Definition of Myocardial Infarction (MI) has highlighted the different pathophysiological mechanisms that may lead to ischaemic and non-ischaemic myocardial injury and has emphasised that the diagnosis of myocardial infarction requires the presence of acute myocardial ischaemia in the setting of acute myocardial injury. This case based review intends to illustrate basic principles on how to apply this new, revised definition in clinical practice.Methods and Results: The distinction between different types of MIs (type 1 or type 2) and the delineation of MI from acute non-ischaemic myocardial injury may be challenging in individual patients, which is illustrated by presenting and discussing real-life routine cases.Conclusions: Type 1 MI is a consequence of coronary plaque rupture or erosion with intracoronary thrombus formation that is usually apparent on coronary angiography. Plausible triggering mechanisms causing myocardial oxygen supply/demand mismatch must be identified for the diagnosis of type 2 MI and its treatment should focus initially on management of the underlying disease attributable to acute myocardial ischaemia.
Subject(s)
Myocardial Infarction/blood , Myocardial Ischemia/blood , Troponin I/blood , Troponin T/blood , Acute Coronary Syndrome/blood , Acute Coronary Syndrome/diagnostic imaging , Acute Coronary Syndrome/physiopathology , Aged , Aged, 80 and over , Coronary Angiography , Electrocardiography , Female , Heart Injuries/blood , Heart Injuries/diagnostic imaging , Heart Injuries/physiopathology , Humans , Male , Myocardial Infarction/diagnostic imaging , Myocardial Infarction/physiopathology , Myocardial Ischemia/diagnostic imaging , Myocardium/pathologyABSTRACT
Although cardiovascular disease is a major health burden for patients with chronic kidney disease, most cardiovascular outcome trials have excluded patients with advanced chronic kidney disease. Moreover, the major cardiovascular outcome trials that have been conducted in patients with end-stage renal disease have not demonstrated a treatment benefit. Thus, clinicians have limited evidence to guide the management of cardiovascular disease in patients with chronic kidney disease, particularly those on dialysis. Several factors contribute to both the paucity of trials and the apparent lack of observed treatment effect in completed studies. Challenges associated with conducting trials in this population include patient heterogeneity, complexity of renal pathophysiology and its interaction with cardiovascular disease, and competing risks for death. The Investigator Network Initiative Cardiovascular and Renal Clinical Trialists (INI-CRCT), an international organization of academic cardiovascular and renal clinical trialists, held a meeting of regulators and experts in nephrology, cardiology, and clinical trial methodology. The group identified several research priorities, summarized in this paper, that should be pursued to advance the field towards achieving improved cardiovascular outcomes for these patients. Cardiovascular and renal clinical trialists must partner to address the uncertainties in the field through collaborative research and design clinical trials that reflect the specific needs of the chronic and end-stage kidney disease populations, with the shared goal of generating robust evidence to guide the management of cardiovascular disease in patients with kidney disease.
Subject(s)
Cardiovascular Diseases/complications , Cardiovascular Diseases/therapy , Kidney Failure, Chronic/therapy , Renal Insufficiency, Chronic/complications , Cardiovascular Diseases/epidemiology , Cardiovascular System/physiopathology , Clinical Trials as Topic , Creatinine/blood , Humans , Interdisciplinary Placement/methods , Kidney/physiopathology , Patient Care Management/methods , Patient Selection , Renal Dialysis/methods , Renal Insufficiency, Chronic/epidemiology , Research Design/trendsABSTRACT
The ability of donor-acceptor (D-A) type polymers to control the positions of the highest occupied (HOMO) and lowest unoccupied (LUMO) molecular orbitals makes them a popular choice for organic solar cell applications. The alternating D-A pattern in a monomer leads to a weak electronic coupling between the constituent monomers within the polymer chain. Exploiting the weak electronic coupling characteristics, we developed a method to efficiently calculate (1) the electronic properties and (2) the optical gap of such polymer chains. The electronic properties (HOMO and LUMO energies, ionization potential, electron affinity, and quasiparticle gap of an oligomer of any length up to an infinitely long polymer) of the D-A polymers are predicted by combining density functional theory calculation results and a tight-binding model. The weak electronic coupling implies that the optical gap of the polymer is size-independent, and thus, it can be calculated using a monomer. We validated the methods using a set of 104 polymers by checking the consistency where the electronic gap of a polymer is larger than the optical gap. Furthermore, we establish relationships between the results obtained from more accurate, yet slower methods (i.e., B3LYP functional, singlet-ΔSCF) with those obtained from the faster counterparts (i.e., BLYP functional, triplet-ΔSCF). Leveraging the found relationships, we propose a way in which the electronic and optical properties of the polymers can be calculated efficiently while retaining high accuracy. The use of the tight-binding model combined with the approach to estimate more accurate results based on less expensive simulations is crucial in the applications where a large volume of computations needs to be carried out efficiently with sufficiently high accuracy, such as high-throughput computational screening or training a machine-learning model.
ABSTRACT
Vertically stacked two-dimensional materials form an ideal platform for controlling and exploiting light-matter interactions at the nanoscale. As a unique feature, these materials host electronic excitations of both intra- and interlayer type with distinctly different properties. In this Letter, using first-principles many-body calculations, we provide a detailed picture of the most prominent excitons in bilayer MoS2, a prototypical van der Waals material. By applying an electric field perpendicular to the bilayer, we explore the evolution of the excitonic states as the band alignment is varied from perfect line-up to staggered (Type II) alignment. For moderate field strengths, the lowest exciton has intralayer character and is almost independent of the electric field. However, we find higher lying excitons that have interlayer character. They can be described as linear combinations of the intralayer B exciton and optically dark charge transfer excitons, and interestingly, these mixed interlayer excitons have strong optical amplitude and can be easily tuned by the electric field. The first-principles results can be accurately reproduced by a simple excitonic model Hamiltonian that can be straightforwardly generalized to more complex van der Waals materials.
ABSTRACT
Electronic excitations in van der Waals heterostructures can have interlayer or intralayer character depending on the spatial localization of the involved charges (electrons and holes). In the case of neutral electron-hole pairs (excitons), both types of excitations have been explored theoretically and experimentally. In contrast, studies of charged trions have so far been limited to the intralayer type. Here we investigate the complete set of interlayer excitations in a MoS2/WS2 heterostructure using a novel ab initio method, which allows for a consistent treatment of both excitons and trions at the same theoretical footing. Our calculations predict the existence of bound interlayer trions below the neutral interlayer excitons. We obtain binding energies of 18/28 meV for the positive/negative interlayer trions with both electrons/holes located on the same layer. In contrast, a negligible binding energy is found for trions which have the two equally charged particles on different layers. Our results advance the understanding of electronic excitations in doped van der Waals heterostructures and their effect on the optical properties.
ABSTRACT
Janus transition metal dichalcogenides with a built-in structural cross-plane (cp) asymmetry have recently emerged as a new class of two-dimensional materials with a large cp dipole. Using first-principles calculations, and a tailored transport method, we demonstrate that stacking graphene and MoSSe Janus structures result in record high homogeneous doping of graphene and abrupt, atomically thin, cross-plane pn-junctions. We show how graphene in contrast to metals can act as electrodes to Janus stacks without screening the cp dipole and predict a large photocurrent response dominated by a cp transport channel in a few-layer stacked device. The photocurrent is above that of a corresponding thin-film silicon device illustrating the great potential of Janus stacks, for example, in photovoltaic devices.
ABSTRACT
The electrochemical oxidation of methane to methanol at remote oil fields where methane is flared is the ultimate solution to harness this valuable energy resource. In this study we identify a fundamental surface catalytic limitation of this process in terms of a compromise between selectivity and activity, as oxygen evolution is a competing reaction. By investigating two classes of materials, rutile oxides and two-dimensional transition metal nitrides and carbides (MXenes), we find a linear relationship between the energy needed to activate methane, i.e. to break the first C-H bond, and oxygen binding energies on the surface. Based on a simple kinetic model we can conclude that in order to obtain sufficient activity oxygen has to bind weakly to the surface but there is an upper limit to retain selectivity. Few potentially interesting candidates are found but this relatively simple description enables future large scale screening studies for more optimal candidates.
ABSTRACT
Polymer solar cells admit numerous potential advantages including low energy payback time and scalable high-speed manufacturing, but the power conversion efficiency is currently lower than for their inorganic counterparts. In a Phenyl-C_61-Butyric-Acid-Methyl-Ester (PCBM)-based blended polymer solar cell, the optical gap of the polymer and the energetic alignment of the lowest unoccupied molecular orbital (LUMO) of the polymer and the PCBM are crucial for the device efficiency. Searching for new and better materials for polymer solar cells is a computationally costly affair using density functional theory (DFT) calculations. In this work, we propose a screening procedure using a simple string representation for a promising class of donor-acceptor polymers in conjunction with a grammar variational autoencoder. The model is trained on a dataset of 3989 monomers obtained from DFT calculations and is able to predict LUMO and the lowest optical transition energy for unseen molecules with mean absolute errors of 43 and 74 meV, respectively, without knowledge of the atomic positions. We demonstrate the merit of the model for generating new molecules with the desired LUMO and optical gap energies which increases the chance of finding suitable polymers by more than a factor of five in comparison to the randomised search used in gathering the training set.
ABSTRACT
van der Waals heterostructures (vdWH) are ideal systems for exploring light-matter interactions at the atomic scale. In particular, structures with a type-II band alignment can yield detailed insight into carrier-photon conversion processes, which are central to, for example, solar cells and light-emitting diodes. An important first step in describing such processes is to obtain the energies of the interlayer exciton states existing at the interface. Here we present a general first-principles method to compute the electronic quasi-particle (QP) band structure and excitonic binding energies of incommensurate vdWHs. The method combines our quantum electrostatic heterostructure (QEH) model for obtaining the dielectric function with the many-body GW approximation and a generalized 2D Mott-Wannier exciton model. We calculate the level alignment together with intra- and interlayer exciton binding energies of bilayer MoS2/WSe2 with and without intercalated hBN layers, finding excellent agreement with experimental photoluminescence spectra. A comparison to density functional theory calculations demonstrates the crucial role of self-energy and electron-hole interaction effects.