Three-Dimensional Assessment of Cervical Vertebrae Anomalies in Patients With Cleft Lip and Palate.

OBJECTIVE: To evaluate the occurrence of cervical vertebrae anomalies (CVA) in patients with unilateral (UCLP) and bilateral cleft lip and palate (BCLP) using cone beam computed tomography (CBCT) examinations. DESIGN: Retrospective assessment of CBCT images. Descriptive statistics were calculated. Fisher exact test or χ2 test was performed to evaluate the differences among each CVA between sex and type of cleft. SETTING: School of Dentistry. PARTICIPANTS: One hundred fifty-one patients with cleft lip and palate (103 UCLP/48 BCLP). INTERVENTIONS: No relevant intervention. MAIN OUTCOME MEASURES: Cone beam computed tomography images were assessed for the presence or absence of 12 most commonly observed CVA: spina bifida, dehiscence, cleft of the posterior arch, cleft of the anterior arch, fusion between cervical vertebrae, block fusion, occipitalization, narrowing of the intervertebral space, posterior ponticle, os odontoideum, ossiculum terminale, and subdental cartilaginous remnants. RESULTS: The presence of subdental cartilaginous remnants was the most frequently observed alteration-found in 81.45% of the sample-and it was the only CVA with statistically significant frequencies in the individuals with BCLP. Considering only the other CVA, 22.51% presented 1 and 5.29% presented 2 or more CVA. CONCLUSIONS: Patients with cleft lip and palate may present an overall high incidence of CVAs. However, when comparing the distribution of the CVAs among sex and types of cleft, the only significant difference noted was a higher incidence of subdental cartilaginous remnants among patients with BCLP.

Surveying the landscape of diagnostic imaging in dentistry's future: Four emerging technologies with promise.

BACKGROUND: Advances in digital radiography for both intraoral and panoramic imaging and cone-beam computed tomography have led the way to an increase in diagnostic capabilities for the dental care profession. In this article, the authors provide information on 4 emerging technologies with promise. TYPES OF STUDIES REVIEWED: The authors feature the following: artificial intelligence in the form of deep learning using convolutional neural networks, dental magnetic resonance imaging, stationary intraoral tomosynthesis, and second-generation cone-beam computed tomography sources based on carbon nanotube technology and multispectral imaging. The authors review and summarize articles featuring these technologies. RESULTS: The history and background of these emerging technologies are previewed along with their development and potential impact on the practice of dental diagnostic imaging. The authors conclude that these emerging technologies have the potential to have a substantial influence on the practice of dentistry as these systems mature. The degree of influence most likely will vary, with artificial intelligence being the most influential of the 4. CONCLUSIONS AND PRACTICAL IMPLICATIONS: The readers are informed about these emerging technologies and the potential effects on their practice going forward, giving them information on which to base decisions on adopting 1 or more of these technologies. The 4 technologies reviewed in this article have the potential to improve imaging diagnostics in dentistry thereby leading to better patient care and heightened professional satisfaction.

Evaluation of deep learning for detecting intraosseous jaw lesions in cone beam computed tomography volumes.

OBJECTIVE: The study aim was to develop and assess the performance of a deep learning (DL) algorithm in the detection of radiolucent intraosseous jaw lesions in cone beam computed tomography (CBCT) volumes. STUDY DESIGN: A total of 290 CBCT volumes from more than 12 different scanners were acquired. Fields of view ranged from 6 × 6 × 6 cm to 18 × 18 × 16 cm. CBCT volumes contained either zero or at least one biopsy-confirmed intraosseous lesion. 80 volumes with no intraosseous lesions were included as controls and were not annotated. 210 volumes with intraosseous lesions were manually annotated using ITK-Snap 3.8.0. 150 volumes (10 control, 140 positive) were presented to the DL software for training. Validation was performed using 60 volumes (30 control, 30 positive). Testing was performed using the remaining 80 volumes (40 control, 40 positive). RESULTS: The DL algorithm obtained an adjusted sensitivity by case, specificity by case, positive predictive value by case, and negative predictive value by case of 0.975, 0.825, 0.848, and 0.971, respectively. CONCLUSIONS: A DL algorithm showed moderate success at lesion detection in their correct locations, as well as recognition of lesion shape and extent. This study demonstrated the potential of DL methods for intraosseous lesion detection in CBCT volumes.

Improving the accuracy of bone mineral density using a multisource CBCT.

Multisource cone beam computed tomography CBCT (ms-CBCT) has been shown to overcome some of the inherent limitations of a conventional CBCT. The purpose of this study was to evaluate the accuracy of ms-CBCT for measuring the bone mineral density (BMD) of mandible and maxilla compared to the conventional CBCT. The values measured from a multi-detector CT (MDCT) were used as substitutes for the ground truth. An anthropomorphic adult skull and tissue equivalent head phantom and a homemade calibration phantom containing inserts with varying densities of calcium hydroxyapatite were imaged using the ms-CBCT, the ms-CBCT operating in the conventional single source CBCT mode, and two clinical CBCT scanners at similar imaging doses; and a clinical MDCT. The images of the anthropomorphic head phantom were reconstructed and registered, and the cortical and cancellous bones of the mandible and the maxilla were segmented. The measured CT Hounsfield Unit (HU) and Greyscale Value (GV) at multiple region-of-interests were converted to the BMD using scanner-specific calibration functions. The results from the various CBCT scanners were compared to that from the MDCT. Statistical analysis showed a significant improvement in the agreement between the ms-CBCT and MDCT compared to that between the CBCT and MDCT.

A carbon nanotube x-ray source array designed for a new multisource cone beam computed tomography scanner.

Cone beam computed tomography (CBCT) is known to suffer from strong scatter and cone beam artifacts. The purpose of this study is to develop and characterize a rapidly scanning carbon nanotube (CNT) field emission x-ray source array to enable a multisource CBCT (ms-CBCT) image acquisition scheme which has been demonstrated to overcome these limitations. A CNT x-ray source array with eight evenly spaced focal spots was designed and fabricated for a medium field of view ms-CBCT for maxillofacial imaging. An external multisource collimator was used to confine the radiation from each focal spot to a narrow cone angle. For ms-CBCT imaging, the array was placed in the axial direction and rapidly scanned while rotating continuously around the object with a flat panel detector. The x-ray beam profile, temporal and spatial resolutions, energy and dose rate were characterized and evaluated for maxillofacial imaging. The CNT x-ray source array achieved a consistent focal spot size of 1.10 ± 0.04 mm × 0.84 ± 0.03 mm and individual beam cone angle of 2.4°±0.08 after collimation. The x-ray beams were rapidly switched with a rising and damping times of 0.21 ms and 0.19 ms, respectively. Under the designed operating condition of 110 kVp and 15 mA, a dose rate of 8245µGy s-1was obtained at the detector surface with the inherent Al filtration and 2312µGy s-1with an additional 0.3 mm Cu filter. There was negligible change of the x-ray dose rate over many operating cycles. A ms-CBCT scan of an adult head phantom was completed in 14.4 s total exposure time for the imaging dose in the range of that of a clinical CBCT scanner. A spatially distributed CNT x-ray source array was designed and fabricated. It has enabled a new multisource CBCT to overcome some of the main inherent limitations of the conventional CBCT.

Low-cost dual-energy CBCT by spectral filtration of a dual focal spot X-ray source.

Dual-energy cone beam computed tomography (DE-CBCT) has been shown to provide more information and improve performance compared to a conventional single energy spectrum CBCT. Here we report a low-cost DE-CBCT by spectral filtration of a carbon nanotube x-ray source array. The x-ray photons from two focal spots were filtered respectively by a low and a high energy filter. Projection images were collected by alternatively activating the two beams while the source array and detector rotated around the object, and were processed by a one-step materials decomposition and reconstruction method. The performance of the DE-CBCT scanner was evaluated by imaging a water-equivalent plastic phantom with inserts containing known densities of calcium or iodine and an anthropomorphic head phantom with dental implants. A mean energy separation of 15.5 keV was achieved at acceptable dose rates and imaging time. Accurate materials quantification was obtained by materials decomposition. Metal artifacts were reduced in the virtual monoenergetic images synthesized at high energies. The results demonstrated the feasibility of high quality DE-CBCT imaging by spectral filtration without using either an energy sensitive detector or rapid high voltage switching.

Evaluation of the feasibility of a multisource CBCT for maxillofacial imaging.

Objective. The aim of this study was to investigate the feasibility of improving the image quality and accuracy of cone beam computed tomography (CBCT) by replacing the conventional wide cone angle x-ray tube with a distributed x-ray source array positioned in the axial direction.Approach. The multisource CBCT (ms-CBCT) design was experimentally simulated using a benchtop scanner with a carbon nanotube x-ray tube and a flat-panel detector. The source was collimated and translated in the axial direction to simulate a source array with a reduced cone angle for each beam. An adjacent scatter ratio subtraction (ASRS) method was implemented for residual scatter reduction. Several phantoms were imaged using the ms-CBCT and conventional CBCT configurations under otherwise similar conditions. The Requirements of the ms-CBCT design on the x-ray source and detector were evaluated.Main results. Compared to the conventional CBCT, the ms-CBCT design with 8 sources and ASRS significantly improved the image quality and accuracy, including: (1) reducing the cupping artifact from 15% to 3.5%; (2) reducing the spatial nonuniformity of the CT Hounsfield unit values from 38.0 to 9.2; (3) improving the contrast-to-noise ratio of the low contrast objects (acrylic and low density polyethylene inserts) against the water-equivalent background by ∼20% and (4) reducing the root-mean-square error of the HU values by 70%, from 420.1 to 124.4. The imaging dose and scanning time used by the current clinical CBCT for maxillofacial imaging can be achieved by current source and detector technologies.Significance. The ms-CBCT design significantly reduces the scatter and improves the image quality and accuracy compared to the conventional CBCT.

Patient shielding during dentomaxillofacial radiography: Recommendations from the American Academy of Oral and Maxillofacial Radiology.

BACKGROUND: The American Academy of Oral and Maxillofacial Radiology established an ad hoc committee to draft evidence-based recommendations and clinical guidance for the application of patient contact shielding during dentomaxillofacial imaging. TYPES OF STUDIES REVIEWED: The committee reviewed monographs and reports from radiation protection organizations and studies that reported radiation dose to gonads, breasts, and thyroid gland from dentomaxillofacial imaging. RESULTS: Considering the absence of radiation-induced heritable effects in humans and the negligible dose to the gonads and fetus from dentomaxillofacial imaging, the committee recommends discontinuing shielding of the gonads, pelvic structures, and fetuses during all dentomaxillofacial radiographic imaging procedures. On the basis of radiation doses from contemporaneous maxillofacial imaging, the committee considered that the risks from thyroid cancer are negligible and recommends that thyroid shielding not be used during intraoral, panoramic, cephalometric, and cone-beam computed tomographic imaging. PRACTICAL IMPLICATIONS: This position statement informs and educates the reader on evolving radiation protection practices and provides simple, unequivocal guidance to dental personnel to implement these guidelines. State and local authorities should be contacted to update regulations to reflect these recommendations.

Volumetric computed tomography with carbon nanotube X-ray source array for improved image quality and accuracy.

Cone beam computed tomography (CBCT) is widely used in medical and dental imaging. Compared to a multidetector CT, it provides volumetric images with high isotropic resolution at a reduced radiation dose, cost and footprint without the need for patient translation. The current CBCT has several intrinsic limitations including reduced soft tissue contrast, inaccurate quantification of X-ray attenuation, image distortions and artefacts, which have limited its clinical applications primarily to imaging hard tissues and made quantitative analysis challenging. Here we report a multisource CBCT (ms-CBCT) which overcomes the short-comings of the conventional CBCT by using multiple narrowly collimated and rapidly scanning X-ray beams from a carbon nanotube field emission source array. Phantom imaging studies show that, the ms-CBCT increases the accuracy of the Hounsfield unit values by 60%, eliminates the cone beam artefacts, extends the axial coverage, and improves the soft tissue contrast-to-noise ratio by 30-50%, compared to the CBCT configuration.

Incidental findings from cone beam computed tomography of the maxillofacial region: a descriptive retrospective study.

OBJECTIVE: To evaluate the type and prevalence of incidental findings from cone beam computed tomography (CBCT) of the maxillofacial region. Findings are divided into those that require (i) intervention/referral, (ii) monitoring, and (iii) no further evaluation. METHODS: Three hundred consecutive CBCT scans conducted in the University of North Carolina School of Dentistry Oral and Maxillofacial Radiology Clinic from January 1 to August 31, 2008 were retrospectively reviewed. Findings were categorized into airway, soft tissue calcifications, bone, temporomandibular joint (TMJ), endodontic, dental developmental, and pathological findings. RESULTS: A total of 272 scans revealed 881 incidental findings (3.2 findings/scan). The most prevalent was airway findings (35%) followed by soft tissue calcifications (20%), bone (17.5%), TMJ (15.4%), endodontic (11.3%), dental developmental (0.7%), and pathological (0.1%). 16.1% required intervention/referral, 15.6% required monitoring, and the remainder (68.3%) required neither. CONCLUSION: This study underscores the need to thoroughly examine all CBCT volumes for clinically significant findings within and beyond the region of interest.

The effect of a deep-learning tool on dentists' performances in detecting apical radiolucencies on periapical radiographs.

OBJECTIVES: To determine the efficacy of a deep-learning (DL) tool in assisting dentists in detecting apical radiolucencies on periapical radiographs. METHODS: Sixty-eight intraoral periapical radiographs with CBCT-proven presence or absence of apical radiolucencies were selected to serve as the testing subset. Eight readers examined the subset, denoted the positions of apical radiolucencies, and used a 5-point confidence scale to score each radiolucency. The same subset was assessed by readers under two conditions: with and without Denti.AI DL tool predictions. For the two sessions, the performance of the readers was compared. The comparison was performed with the alternate free response receiver operating characteristic (AFROC) methodology. RESULTS: Localization of lesion accuracy (AFROC-AUC), specificity and sensitivity (by lesion) detection demonstrated improvements in the DL aided session in comparison with the unaided reading session. Subgroup performance analysis revealed an increase in sensitivity for small radiolucencies and in radiolucencies located apical to endodontically treated teeth.. CONCLUSION: The study revealed that the DL technology (Denti.AI) enhances dental professionals' abilities to detect apical radiolucencies on intraoral radiographs. ADVANCES IN KNOWLEDGE: DL tools have the potential to improve diagnostic efficacy of dentists in identifying apical radiolucencies on periapical radiographs.

Feasibility of dual-energy CBCT by spectral filtration of a dual-focus CNT x-ray source.

Cone beam computed tomography (CBCT) is now widely used in dentistry and growing areas of medical imaging. The presence of strong metal artifacts is however a major concern of using CBCT especially in dentistry due to the presence of highly attenuating dental restorations, fixed appliances, and implants. Virtual monoenergetic images (VMIs) synthesized from dual energy CT (DECT) datasets are known to reduce metal artifacts. Although several techniques exist for DECT imaging, they in general come with significantly increased equipment cost and not available in dental clinics. The objectives of this study were to investigate the feasibility of developing a low-cost dual energy CBCT (DE-CBCT) by retrofitting a regular CBCT scanner with a carbon nanotube (CNT) x-ray source with dual focal spots and corresponding low-energy (LE) and high-energy (HE) spectral filters. A testbed with a CNT field emission x-ray source (NuRay Technology, Chang Zhou, China), a flat panel detector (Teledyne, Waterloo, Canada), and a rotating object stage was used for this feasibility study. Two distinct polychromatic x-ray spectra with the mean photon energies of 66.7keV and 86.3keV were produced at a fixed 120kVp x-ray tube voltage by using Al+Au and Al+Sn foils as the respective LE and HE filters attached to the exist window of the x-ray source. The HE filter attenuated the x-ray photons more than the LE filter. The calculated post-object air kerma rate of the HE beam was 31.7% of the LE beam. An anthropomorphic head phantom (RANDO, Nuclear Associates, Hicksville, NY) with metal beads was imaged using the testbed and the images were reconstructed using an iterative volumetric CT reconstruction algorithm. The VMIs were synthesized using an image-domain basis materials decomposition method with energy ranging from 30 to 150keV. The results were compared to the reconstructed images from a single energy clinical dental CBCT scanner (CS9300, Carestream Dental, Atlanta, GA). A significant reduction of the metal artifacts was observed in the VMI images synthesized at high energies compared to those from the same object imaged by the clinical dental CBCT scanner. The ability of the CNT x-ray source to generate the output needed to compensate the reduction of photon flux due to attenuation from the spectral filters and to maintain the CT imaging time was evaluated. The results demonstrated the feasibility of DE-CBCT imaging using the proposed approach. Metal artifact reduction was achieved in VMIs synthesized. The x-ray output needed for the proposed DE-CBCT can be generated by a fixed-anode CNT x-ray source.

Extraoral bite-wing radiographs: A universally accepted paradox.

BACKGROUND: The development of specialized panoramic radiograph machine software has spawned the introduction of an innovative and promising dental radiographic examination type: extraoral bite-wings. But does this unconventional type of imaging belong in the bite-wing family? Is there any relationship at all to the conventional bite-wing radiograph? OBJECTIVES: The purpose of this article is not to make a case for the diagnostic effectiveness of one system over the other; this is best left to further clinical evaluation. Instead, the authors intend to provide an outline of a few key and distinguishing elements of the intraoral bite-wing radiographic examination followed by those of the extraoral panoramic substitute and draw attention to the importance of reimagining the increasingly universal naming convention of this novel radiographic examination, the paradoxical "extraoral bite-wing radiograph", based on the fundamental principles of each of these imaging systems. PRACTICAL IMPLICATIONS: The accuracy of clinical and technical terminology in oral radiography is of paramount importance to both the profession and patients, especially when considering emerging technologies.

Comparison of radiographical characteristics and diagnostic accuracy of intraosseous jaw lesions on panoramic radiographs and CBCT.

OBJECTIVE: To investigate the differences in imaging characteristics and the diagnostic accuracy of 225 intraosseous jaw lesions on panoramic radiographs (PAN) versus cone beam computed tomography (CBCT). METHODS: 225 sets of PAN and CBCT images with biopsy-proven histopathological diagnoses were retrospectively compared in terms of radiographic features and diagnostic accuracy. The imaging characteristics of PAN and CBCT were independently evaluated by two oral and maxillofacial radiologists who were required to answer 12 questions and provided up to three differential diagnoses with their confidence scores. RESULTS: Odds ratios (ORs) were statistically significant for border cortication (OR = 1.521; p = .003) and border continuity (OR = 0.421; p = .001), involvement on neurovascular canals (OR = 2.424; p < .001), expansion (OR = 7.948; p < .001), cortical thinning (OR = 20.480; p < .001) as well as its destruction (OR = 25.022; p < .001) and root resorption (OR = 2.477; p < .001). Furthermore, imaging features in the posterior and mandibular regions showed better agreement than those in the anterior and maxillary regions, respectively. The diagnostic accuracy of the first differential diagnosis was higher on CBCT than on PAN (Observer 1:78.7 vs 64.4%; Observer 2: 78.7 vs 70.2% (p < .001)). The observers' confidence scores were also higher at CBCT interpretation compared with PAN. CONCLUSIONS: CBCT demonstrated a greater number of imaging characteristics of intraosseous jaw lesions compared with PAN, especially in the anterior regions of both jaws and in the maxilla. Diagnostic accuracy is improved with CBCT compared to PAN, especially for lesions in the maxilla. Radiologists have greater confidence when using CBCT.

Multidisciplinary trauma management: a case report.

This case report documents the dental management of two permanent maxillary central incisors with a severe intrusive labial luxation injury in conjunction with one complicated and one uncomplicated crown fracture. Additionally, there was a fracture of the labial cortical plate which remained attached to the overlying soft tissue. The two affected teeth and fractured labial plate of bone were surgically repositioned and splinted. Endodontic therapy was completed on the two incisors and the two crown fragments, which had been maintained wet, were re-attached. The report describes a multidisciplinary approach to trauma management and case progress over a 20-month period.

Comparing the diagnostic efficacy of intraoral radiography and cone beam computed tomography volume registration in the detection of mandibular alveolar bone defects.

OBJECTIVES: The aim of this study was to (1) compare bone loss detection accuracy with intraoral radiography and registered cone beam computed tomography (CBCT); (2) assess repeatability with both modalities; (3) determine factors affecting defect detection; and (4) determine the effect of buccolingual bone thickness on defect detection. STUDY DESIGN: Six observers viewed intraoral radiographs and CBCT scans before and after the defect to determine defect presence and extent. Receiver operating characteristic (ROC), sensitivity, specificity, logistic regression, odds ratio, intraclass correlation coefficient, and weighted kappa were used. RESULTS: CBCT and intraoral radiography mean ROC area under the curve values were not statistically different (0.90 vs 0.81; P = .06). CBCT had higher sensitivity compared with intraoral radiography (0.85 vs 0.63; P = .01) but similar specificity (0.91 vs 0.84; P = .45). Bone thickness, imaging modality, and observer had significant effects on defect detection (P < .001). Odds ratios for CBCT vs intraoral radiography were 2.29 for diagnostic accuracy and 1.52 for buccolingual bone thickness. There was moderate interobserver agreement for detection of defects and substantial intraobserver agreement for measurement of extent. CONCLUSIONS: CBCT showed equivalent diagnostic efficacy and specificity for defect detection and higher sensitivity compared with intraoral radiography. CBCT increases the odds of accurate defect assessment more than 2-fold compared with intraoral radiography. The odds of bone loss detection increase by approximately 50% per millimeter of buccolingual alveolar bone loss.

Cone-beam CT diagnostic applications: caries, periodontal bone assessment, and endodontic applications.

Cone-beam CT (CBCT) is useful for many maxillofacial applications, such as implant site imaging and diagnosis and treatment planning for orthodontics and craniofacial surgery. Dentoalveolar applications, such as carious lesion detection and characterization, assessment of the three-dimensional nature of periodontal bone topography, and various endodontic applications are less known and not as thoroughly studied. This article explores and assesses in vivo and in vitro efforts to apply CBCT imaging to these more common dentoalveolar tasks. CBCT imaging, like its medical counterpart, can be seen as a highly useful and, in some instances, indispensable part of the dental imaging armamentarium.

Comparing panoramic radiographs and cone beam computed tomography: Impact on radiographic features and differential diagnoses.

OBJECTIVES: The aims of this study were to determine whether lesion features appear differently on panoramic radiography (PAN) and cone beam computed tomography (CBCT), and whether the use of CBCT affects diagnostic accuracy and observers' confidence in comparison with PAN. STUDY DESIGN: Three oral and maxillofacial radiologists reviewed 33 sets of PAN images and CBCT volumes of biopsy-proven lesions. They described 12 different lesion features and provided up to 3 ranked differential diagnoses, as well as their confidence with respect to those diagnoses. Their confidence was weighted by the rank at which the correct diagnosis was provided. RESULTS: Odds ratios (ORs) were statistically significant for border definition (OR = 5.45; P = .004), continuity of border cortication (OR = 0.34; P = .035), effect on neurovascular canals (OR = 6.38; P = .043), expansion (OR = 18.56; P < .001), cortical thinning (OR = 30.22; P < .001), and cortical destruction (OR = 9.80; P < .001). There was no association between the 2 modalities and the rank at which the correct differential diagnoses were made or the observers' weighted confidence. CONCLUSIONS: Before acquiring a CBCT scan to aid in the diagnosis of an intraosseous lesion, clinicians should consider the diagnostic information that is expected to be gained. In this study, although there were differences between PAN and CBCT with respect to some lesion features, CBCT did not help improve diagnostic accuracy.