ABSTRACT
PURPOSE: This study is aimed to evaluate the effect of generation change on accuracy of IOSs on full-arch scans and the inter-operator reliability. METHODS: In this study, 6 different IOS were tested: 3Shape Trios 3 (20.1.2.), 3Shape Trios 4 (20.1.1.), Medit i500 (2.3.6.), Medit i700 (2.4.6.), Planmeca Emerald (6.0.1.) and Planmeca Emerald S (6.0.1.). Eighteen dental students, inexperienced in scanning, took part in this study as operators. Each operator made 10 digital impressions; altogether, 30 impressions were made by each scanner. The 30 STL files were imported to the Geomagic Control X program, where they were compared to a reference STL file; the surface point's deviation of the full arch and the distance between the second molars' distobuccal cusps were measured, the inter-operator reliability was also investigated. RESULTS: A significant increase in accuracy was found between Trios 3 and 4 in the case of both parameters and between Medit i500 and i700 in the case of full arch. There was no significant difference between Planmeca generations. In case of the inter-operator reliability no significant difference was detected. CONCLUSION: Within this current study's limitation, it can be concluded that surface digitalization's accuracy can be modified with generation changes and that digital technology is less technique sensitive than traditional impression taking.
Subject(s)
Imaging, Three-Dimensional , Models, Dental , Humans , Reproducibility of Results , Dental Impression Technique , Computer-Aided Design , Dental ArchABSTRACT
BACKGROUND: Digital workflow is showing an increasing tendency in everyday dentistry. Accuracy is essential during digital dental workflows for all indication areas. The present study aimed to evaluate the effect of software updates on the accuracy of intraoral scanner (IOS) devices. METHODS: 3Shape Trios 3 Pod with software versions 18.1.2. (TRI3_1) and 20.1.2. (TRI3_2); 3Shape Trios 4 Move, version 19.2.2. (TRI4_1); and 3Shape Trios 4 Pod, version 20.1.1. (TRI4_2) were used to take direct optical impressions from a polymethyl methacrylate (PMMA) full arch reference model with prepared teeth (FDI 11,14,17 for crowns and FDI 26 for onlay) and an edentulous region (between FDI 14 and 17). The scanners were used eight times; STL files were imported into Geomagic Control X for accuracy assessment by comparing them to a reference data set created by an industrial high-precision scanner (AICON SmartScan-3D C5). The average deviation of the surface points was calculated in three locations: across a full arch (Parameter 1), the region of a four-unit bridge (Parameter 2), and a single prepared abutment (Parameter 3). RESULTS: In parameter 1 and 2, the newest model with the latest software (TRI4_2) reached the highest accuracy (31.06 ± 5.24 µm and 21.69 ± 7.50 µm). In parameter 3, an older generation scanner running legacy software produced the highest accuracy: TRI4_1, 11.75 ± 0.35 µm. CONCLUSION: Appropriate software updates can significantly increase the trueness and precision of intraoral scanner devices. With updated software, the older generation can match the accuracy level of latest equipment.
Subject(s)
Computer-Aided Design , Dental Impression Technique , Humans , Imaging, Three-Dimensional , Models, Dental , Software , Dental ArchABSTRACT
BACKGROUND: The evolution of intraoral scanners (IOSs) is rapid, and new IOSs appear on the market with different properties depending on the manufacturers. There is no uniform rating system based on a defined set of aspects that has reported in the literature that can be used to compare these devices. This validation study aimed to compare different IOSs based on objective and comprehensive parameters. METHODS: In this study, 12 different IOSs were examined. The IOSs that were tested in this study in order of their delivery included the 3Shape Trios 3 Pod®, Planmeca Emerald®, Straumann DWIO®, GC Aadva®, iTero Element 2®, CEREC Primescan®, Medit i500®, 3Shape Trios 4 Move®, Carestream CS3600®, 3Shape Trios 4 Pod®, Carestream CS3700®, and Planmeca Emerald S®. IOSs were evaluated in four different ways: (a)summary chart, (b)comparative assessment, (c)data based on in vitro measurements and (d)accuracy measurements. A scoring system was created to enable an objective rating of IOSs. RESULTS: The differences among IOSs were demonstrated in point scores (summary chart[max. 10 points] + weight of IOSs[max. 2.5 points] + circumference of IOSs[max. 2.5 points] + in vitro scanning time[max. 2.5 points] + pauses in data capture[max. 2.5 points] + accuracy[max. 10 points] = summary[max. 30 points]). Trios 4 Pod achieved the greatest cumulative score (23.37 points), furthermore it earned the highest points for summary chart and scanning speed. Regarding scanning continuity, the best-performing IOSs, which tied at identical point scores, were the Trios 3 and 4 Pod, Trios 4 Move, iTero Element 2, CS3600 and CS3700. The most accurate IOS was the CEREC Primescan, although it earned the lowest points of the comparative assessment (heaviest IOS). GC Aadva scored 5.73 points of a maximum of 30 points, which was the poorest result in this study. CONCLUSION: The scoring system reflects the differences among IOS devices based on the evaluated objective parameters and can be used to help clinicians select the right IOS device. The new generations of IOSs have more special properties, and their accuracy is higher than the previous versions. Trial registration The permission for this study was granted by University Ethics Committee of Semmelweis University (SE RKEB number:108/2019).
Subject(s)
Dental Impression Technique , Models, Dental , Computer-Aided Design , Dental Arch , Humans , Imaging, Three-DimensionalABSTRACT
BACKGROUND: This study aimed to investigate the effect of ovariectomy and vitamin D3 on bone microstructure; this effect was examined in three regions of interest at one femoral and two mandibular sampling sites bone in an ovariectomized mouse model. METHODS: Thirty-six week-old female mice were randomly divided into three groups: 10 subjects were given oral cholecalciferol (vitamin D3) daily for 6 weeks after undergoing bilateral ovariectomy (D3 group), while 10 ovariectomized subjects (OVX) and 10 subjects who underwent a sham operation (SHAM) received peanut oil daily during the investigation. After extermination, the left hemimandible and femur were removed and scanned by micro-CT. The bone micromorphology parameters were analyzed and the BMD was calculated. RESULTS: The bone volume fraction (BV/TV) was significantly lower in the trabecular bone of the mandibular condyle in the OVX group than in the SHAM and D3 groups. Also there was a significant difference between the SHAM and D3 groups. The specific bone surface (BS/BV) was significantly higher in the OVX and D3 groups than in the SHAM group. Trabecular thickness (Tb.Th) was significantly higher in the SHAM group, and the trabecular bone pattern factor (Tb.Pf) was significantly higher in the OVX group than in the other two groups. Bone mineral density (BMD) of the femur and the mandible was significantly lower in the OVX group than in the SHAM and D3 groups. CONCLUSIONS: Our results show that ovariectomy causes a significantly weaker bone microstructure in the mandibular condyle, where the protective effect of vitamin D3 resulted in a partial resorption.
Subject(s)
Osteoporosis , Animals , Female , Humans , Mice , Bone Density , Cholecalciferol , Mandibular Condyle/diagnostic imaging , Ovariectomy , X-Ray MicrotomographyABSTRACT
Problem: Several types of 3D printers with different techniques and prices are available on the market. However, results in the literature are inconsistent, and there is no comprehensive agreement on the accuracy of 3D printers of different price categories for dental applications. Aim: This study aimed to investigate the accuracy of five different 3D printing systems, including a comparison of budget- and higher-end 3D printing systems, according to a standardized production and evaluation protocol. Material and methods: A maxillary reference model with prepared teeth was created using 16 half-ball markers with a diameter of 1 mm to facilitate measurements. A reference file was fabricated using five different 3D printers. The printed models were scanned and superimposed onto the original standard tesselation language (.stl) file, and digital measurements were performed to assess the 3-dimensional and linear deviations between the reference and test models. Results: After examining the entire surface of the models, we found that 3D printers using Fused filament fabrication (FFF) technology -120.2 (20.3) µm create models with high trueness but high distortion. Distortions along the z-axis were found to be the highest with the stereolithography (SLA)-type 3D printer at -153.7 (38.7) µm. For the 4-unit FPD, we found 201.9 (41.8) µm deviation with the digital light processing (DLP) printer. The largest deviation (-265.1 (55.4) µm) between the second molars was observed for the DLP printer. Between the incisor and the second molar, the best results were produced by the FFF printer with -30.5 (76.7) µm. Conclusion: Budget-friendly 3D printers are comparable to professional-grade printers in terms of precision. In general, the cost of a printing system is not a reliable indicator of its level of accuracy.
ABSTRACT
PURPOSE: To compare the accuracy (trueness, precision) of direct and indirect scanning CAD/CAM methods. METHODS: A master cast with prepared abutments and edentulous parts was created from polymethyl methacrylate (PMMA). A high-resolution industrial scanner was used to create a reference model. Polyvinyl-siloxane (PVS) impressions and digital impressions with three intraoral scanners (iTero, Cerec, Trios) were made (n=10 for each) from the PMMA model. A laboratory scanner (Scan CS2) was used to digitize the sectioned cast made from the PVS impressions. The stereolithographic (STL) files of the impressions (n=40) were exported. Each file was compared to the reference using Geomagic Verify software. Six points were assigned to enable virtual calliper measurement of three distances of varying size within the arch. Methods were compared using interquartile range regression and equality-of-variance tests for precision, and mixed-effects linear regression for trueness. RESULTS: The mean (SD) deviation of short distance measurements from the reference value was -40.3 (79.7) µm using the indirect, and 22.3 (40.0) µm using the direct method. For the medium distance, indirect measurements deviated by 5.2 (SD: 111.3) µm, and direct measurements by 115.8 (SD: 50.7) µm, on average; for the long distance, the corresponding estimates were -325.8 (SD: 134.1) µm with the indirect, and -163.5 (SD: 145.5) µm with the direct method. Significant differences were found between the two methods (p<0.05). CONCLUSIONS: With both methods, the shorter the distance, the more accurate results were achieved. Virtual models obtained by digital impressions can be more accurate than their conventional counterparts.
Subject(s)
Computer-Aided Design , Dental Impression Technique , Imaging, Three-Dimensional , Dental Impression Materials , In Vitro Techniques , Linear Models , Models, Dental , Polymethyl Methacrylate , Sensitivity and SpecificityABSTRACT
Bisphosphonates are widely used as therapeutic agents in bone disorders including cancer metastasis due to their osteoclast inhibitory effect. Recent data shows that bisphosphonates may also induce bone-building by stimulating osteoblast activity. Clinical observations, however, have revealed that bisphosphonates may cause necrosis in the oral cavity which questions their usefulness in bone regeneration during the consolidation of inorganic implants. Here we report the investigation of bone neogenesis following chronic amine bisphosphonate (Zometa) treatment in a novel experimental model, using the rat tail vertebra as a support. This method involves (1) implantation of titan screw into the tail vertebrae, (2) systemic bisphosphonate treatment and (3) quantitative biophysical measurements which mirrors consolidation of implant, i.e. strength of fixation and changes in newly formed bone architecture using micro Computer Tomograph (micro-CT). The degree of fixation of titan implants (osseointegration) increased by 36% on the effect of Zometa and the structure of newly formed bone became robust. The mass of new bone increased 3.1-fold at 6 weeks of regeneration, as compared to controls. Thus, Zometa, a potent aminobisphosphonate used in therapy of cancer metastases, osteoporosis and bone marrow transplantation, significantly increased bone neogenesis and enforced osseointegration of titan implants as measured quantitatively in the rat tail vertebra. Our data support the usefulness of aminobisphosphonates in the rehabilitation of bone loss as well as in improvement osseointegration of implants. We emphasise that this novel method may open up new possibilities for screening the effects of local and systemic treatments.