ABSTRACT
Pressurized metered dose inhalers (pMDIs) require optimized formulations to provide stable, consistent lung delivery. This study investigates the feasibility of novel rugose lipid particles (RLPs) as potential drug carriers in pMDI formulations. The physical stability of RLPs was assessed in three different propellants: the established HFA-134a and HFA-227ea and the new low global-warming-potential (GWP) propellant HFO-1234ze. A feedstock containing DSPC and calcium chloride was prepared without pore forming agent to spray dry two RLP batches at inlet temperatures of 55 °C (RLP55) and 75 °C (RLP75). RLPs performance in pMDI formulations was compared to two reference samples that exhibit significantly different performance when suspended in propellants: well-established engineered porous particles and particles containing 80% trehalose and 20% leucine (80T20L). An accelerated stability study at 40 °C and relative humidity of 7% ± 5% was conducted over 3 months. At different time points, a shadowgraphic imaging technique was used to evaluate the colloidal stability of particles in pMDIs. Field emission electron microscopy with energy dispersive X-ray spectroscopy was used to evaluate the morphology and elemental composition of particles extracted from the pMDIs. After 2 weeks, all 80T20L formulations rapidly aggregated upon agitation and exhibited significantly inferior colloidal stability compared to the other samples. In comparison, both the RLP55 and RLP75 formulations, regardless of the propellant used, retained their rugose structure and demonstrated excellent suspension stability comparable with the engineered porous particles. The studied RLPs demonstrate great potential for use in pMDI formulations with HFA propellants and the next-generation low-GWP propellant HFO-1234ze.
Subject(s)
Fluorocarbons , Hydrocarbons, Fluorinated , Metered Dose Inhalers , Feasibility Studies , Lipids , Administration, InhalationABSTRACT
PURPOSE: To develop a new lipid-based particle formulation platform for respiratory drug delivery applications. To find processing conditions for high surface rugosity and manufacturability. To assess the applicability of the new formulation method to different lipids. METHODS: A new spray drying method with a simplified aqueous suspension feedstock preparation process was developed for the manufacture of rugose lipid particles of 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC). A study covering a wide range of feedstock temperatures and outlet temperatures was conducted to optimize the processing conditions. Aerosol performance was characterized in vitro and in silico to assess the feasibility of their use in respiratory drug delivery applications. The applicability of the new spray drying method to longer-chain phospholipids with adjusted spray drying temperatures was also evaluated. RESULTS: Highly rugose DSPC lipid particles were produced via spray drying with good manufacturability. A feedstock temperature close to, and an outlet temperature lower than, the main phase transition were identified as critical in producing particles with highly rugose surface features. High emitted dose and total lung dose showed promising aerosol performance of the produced particles for use as a drug loading platform for respiratory drug delivery. Two types of longer-chain lipid particles with higher main phase transition temperatures, 1,2-diarachidoyl-sn-glycero-3-phosphocholine (DAPC) and 1,2-dibehenoyl-sn-glycero-3-phosphocholine (22:0 PC), yielded similar rugose morphologies when spray dried at correspondingly higher processing temperatures. CONCLUSIONS: Rugose lipid particles produced via spray drying from an aqueous suspension feedstock are promising as a formulation platform for respiratory drug delivery applications. The new technique can potentially produce rugose particles using various other lipids.
Subject(s)
Drug Delivery Systems , Phosphorylcholine , Administration, Inhalation , Aerosols , Particle Size , Phospholipids , PowdersABSTRACT
Globally, more people die annually from tuberculosis than from any other single infectious agent. Unfortunately, there is no commercially-available vaccine that is sufficiently effective at preventing acquisition of pulmonary tuberculosis in adults. In this study, pre-exposure prophylactic pulmonary delivery of active aerosolized anti-tuberculosis bacteriophage D29 was evaluated as an option for protection against Mycobacterium tuberculosis infection. An average bacteriophage concentration of approximately 1 PFU/alveolus was achieved in the lungs of mice using a nose-only inhalation device optimized with a dose simulation technique and adapted for use with a vibrating mesh nebulizer. Within 30 minutes of bacteriophage delivery, the mice received either a low dose (â¼50-100 CFU), or an ultra-low dose (â¼5-10 CFU), of M. tuberculosis H37Rv aerosol to the lungs. A prophylactic effect was observed with bacteriophage aerosol pre-treatment significantly decreasing M. tuberculosis burden in mouse lungs 24 hours and 3 weeks post-challenge (p < 0.05). These novel results indicate that a sufficient dose of nebulized mycobacteriophage aerosol to the lungs may be a valuable intervention to provide extra protection to health care professionals and other individuals at risk of exposure to M. tuberculosis.
ABSTRACT
PURPOSE: The effects of particle size and particle surface roughness on the colloidal stability of pressurized pharmaceutical suspensions were investigated using monodisperse spray-dried particles. METHODS: The colloidal stability of multiple suspensions in the propellant HFA227ea was characterized using a shadowgraphic imaging technique and quantitatively compared using an instability index. Model suspensions of monodisperse spray-dried trehalose particles of narrow distributions (GSD < 1.2) and different sizes (MMAD = 5.98 µm, 10.1 µm, 15.5 µm) were measured first to study the dependence of colloidal stability on particle size. Particles with different surface rugosity were then designed by adding different fractions of trileucine, a shell former, and their suspension stability measured to further study the effects of surface roughness on the colloidal stability of pressurized suspensions. RESULTS: The colloidal stability significantly improved (p < 0.001) from the suspension with 15.5 µm-particles to the suspension with 5.98 µm-particles as quantified by the decreased instability index from 0.63 ± 0.04 to 0.07 ± 0.01, demonstrating a strongly size-dependent colloidal stability. No significant improvement of suspension stability (p > 0.1) was observed at low trileucine fraction at 0.4 % where particles remained relatively smooth until the surface rugosity of the particles was improved by the higher trileucine fractions at 1.0 % and 5.0 %, which was indicated by the substantially decreased instability index from 0.27 ± 0.02 for the suspensions with trehalose model particles to 0.18 ± 0.01 (p < 0.01) and 0.03 ± 0.01 (p < 0.002) respectively. CONCLUSIONS: Surface modification of particles by adding shell formers like trileucine to the feed solutions of spray drying was demonstrated to be a promising method of improving the colloidal stability of pharmaceutical suspensions in pressurized metered dose inhalers.
Subject(s)
Drug Stability , Nanoparticles/chemistry , Suspensions/chemistry , Administration, Inhalation , Aerosol Propellants/chemistry , Chemistry, Pharmaceutical/methods , Desiccation/methods , Metered Dose Inhalers , Oligopeptides/chemistry , Particle Size , Porosity , Pressure , Surface Properties , Trehalose/chemistryABSTRACT
The Publisher regrets having introduced the following errors into the article when performing proof corrections.
ABSTRACT
PURPOSE: Evaporation and particle formation from multi-solvent microdroplets containing solid excipients pertaining to spray-drying of therapeutic agents intended for lung delivery were studied. Various water and ethanol co-solvent systems containing a variety of actives and excipients (beclomethasone, budesonide, leucine, and trehalose) were considered. METHODS: Numerical methods were used to predict the droplet evaporation rates and internal solute transfers, and their results verified and compared with results from two separate experimental setups. In particular, an electrodynamic balance was used to measure the evaporation rates of multicomponent droplets and a monodisperse droplet chain setup collected dried microparticles for further analytical investigations and ultramicroscopy. RESULTS: The numerical results are used to explain the different particle morphologies dried from solutions at different co-solvent compositions. The obtained numerical data clearly show that the two parameters controlling the general morphology of a dried particle, namely the Péclet number and the degree of saturation, can change with time in a multi-solvent droplet. This fact complicates product development for such systems. However, this additional complexity vanishes at what we define as the iso-compositional point, which occurs when the solvent ratios and other composition-dependent properties of the droplet remain constant during evaporation, similar to the azeotrope of such systems during distillation. CONCLUSIONS: Numerical and experimental analysis of multi-solvent systems indicate that spray-drying near the iso-compositional ratio simplifies the design and process development of such systems.
Subject(s)
Excipients/chemistry , Nebulizers and Vaporizers , Solvents/chemistry , Administration, Inhalation , Beclomethasone/chemistry , Budesonide/chemistry , Desiccation , Ethanol/chemistry , Kinetics , Leucine/chemistry , Powders/chemistry , Quantum Theory , Trehalose/chemistry , Water/chemistryABSTRACT
PURPOSE: To compare titer reduction and delivery rate of active anti-tuberculosis bacteriophage (phage) D29 with three inhalation devices. METHODS: Phage D29 lysate was amplified to a titer of 11.8 ± 0.3 log10(pfu/mL) and diluted 1:100 in isotonic saline. Filters captured the aerosolized saline D29 preparation emitted from three types of inhalation devices: 1) vibrating mesh nebulizer; 2) jet nebulizer; 3) soft mist inhaler. Full-plate plaque assays, performed in triplicate at multiple dilution levels with the surrogate host Mycobacterium smegmatis, were used to quantify phage titer. RESULTS: Respective titer reductions for the vibrating mesh nebulizer, jet nebulizer, and soft mist inhaler were 0.4 ± 0.1, 3.7 ± 0.1, and 0.6 ± 0.3 log10(pfu/mL). Active phage delivery rate was significantly greater (p < 0.01) for the vibrating mesh nebulizer (3.3x108 ± 0.8x108 pfu/min) than for the jet nebulizer (5.4x104 ± 1.3x104 pfu/min). The soft mist inhaler delivered 4.6x106 ± 2.0x106 pfu per 11.6 ± 1.6 µL ex-actuator dose. CONCLUSIONS: Delivering active phage requires a prudent choice of inhalation device. The jet nebulizer was not a good choice for aerosolizing phage D29 under the tested conditions, due to substantial titer reduction likely occurring during droplet production. The vibrating mesh nebulizer is recommended for animal inhalation studies requiring large amounts of D29 aerosol, whereas the soft mist inhaler may be useful for self-administration of D29 aerosol.
Subject(s)
Bacteriophages , Nebulizers and Vaporizers , Tuberculosis/therapy , Administration, Inhalation , Aerosols/chemistry , Animals , Drug Liberation , Drug Stability , Equipment Design/methods , Equipment and Supplies , Humans , Phage TherapyABSTRACT
PURPOSE: The potential of aerosol phage therapy for treating lung infections has been demonstrated in animal models and clinical studies. This work compared the performance of two dry powder formation techniques, spray freeze drying (SFD) and spray drying (SD), in producing inhalable phage powders. METHOD: A Pseudomonas podoviridae phage, PEV2, was incorporated into multi-component formulation systems consisting of trehalose, mannitol and L-leucine (F1 = 60:20:20 and F2 = 40:40:20). The phage titer loss after the SFD and SD processes and in vitro aerosol performance of the produced powders were assessed. RESULTS: A significant titer loss (~2 log) was noted for droplet generation using an ultrasonic nozzle employed in the SFD method, but the conventional two-fluid nozzle used in the SD method was less destructive for the phage (~0.75 log loss). The phage were more vulnerable during the evaporative drying process (~0.75 log further loss) compared with the freeze drying step, which caused negligible phage loss. In vitro aerosol performance showed that the SFD powders (~80% phage recovery) provided better phage protection than the SD powders (~20% phage recovery) during the aerosolization process. Despite this, higher total lung doses were obtained for the SD formulations (SD-F1 = 13.1 ± 1.7 × 10(4) pfu and SD-F2 = 11.0 ± 1.4 × 10(4) pfu) than from their counterpart SFD formulations (SFD-F1 = 8.3 ± 1.8 × 10(4) pfu and SFD-F2 = 2.1 ± 0.3 × 10(4) pfu). CONCLUSION: Overall, the SD method caused less phage reduction during the powder formation process and the resulted powders achieved better aerosol performance for PEV2.
Subject(s)
Freeze Drying/methods , Lung/virology , Phage Therapy/methods , Podoviridae/pathogenicity , Pseudomonas Infections/therapy , Pseudomonas/virology , Respiratory Tract Infections/therapy , Administration, Inhalation , Aerosols , Leucine/chemistry , Lung/microbiology , Mannitol/chemistry , Microbial Viability , Nebulizers and Vaporizers , Powders , Pseudomonas/pathogenicity , Pseudomonas Infections/microbiology , Pseudomonas Infections/virology , Respiratory Tract Infections/microbiology , Respiratory Tract Infections/virology , Trehalose/chemistry , UltrasonicsABSTRACT
Recently, several approaches have been reported to improve the dissolution rate and bioavailability of furosemide, a class IV drug. However, to the best of our knowledge, none of them proposed nanocrystals. In the last decade, nanocrystals successfully addressed solubility issues by increasing surface area and saturation solubility, both leading to an increase in the dissolution rate of poor water soluble drugs. The preparation of furosemide nanocrystals was by a rotation revolution mixer method. Size distribution and morphology were performed using laser diffraction and scanning electron microscopy, respectively. In addition, differential scanning calorimetry, thermogravimetry, X-ray powder diffraction (XRD) and low frequency shift-Raman spectroscopy allowed investigating the thermal properties and crystalline state. Solubility saturation and intrinsic dissolution rate (IDR) studies were conducted. The thermal analysis revealed lower melting range for the nanocrystals comparing to furosemide. Moreover, a slight crystalline structure change to the amorphous state was observed by XRD and confirmed by low frequency shift Raman. The particle size was reduced to 231 nm with a polydispersity index of 0.232, a 30-fold reduction from the original powder. Finally, the saturation solubility and IDR showed a significant increase. Furosemide nanocrystals showed potential for development of innovative formulations as an alternative to the commercial products.
Subject(s)
Furosemide/chemistry , Nanoparticles/chemistry , Calorimetry, Differential Scanning/methods , Chemistry, Pharmaceutical/methods , Drug Compounding/methods , Microscopy, Electron, Scanning/methods , Particle Size , Rotation , Solubility , Spectroscopy, Fourier Transform Infrared/methods , Water/chemistry , X-Ray Diffraction/methodsABSTRACT
The particle formation process for microparticles of cellulose acetate butyrate dried from an acetone solution was investigated experimentally and theoretically. A monodisperse droplet chain was used to produce solution microdroplets in a size range of 55-70 µm with solution concentrations of 0.37 and 10 mg/mL. As the droplets dried in a laminar air flow with a temperature of 30, 40, or 55 °C, the particle formation process was recorded by two independent optical methods. Dried particles in a size range of 10-30 µm were collected for morphology analysis, showing hollow, elongated particles whose structure was dependent on the drying gas temperature and initial solution concentration. The setup allowed comprehensive measurements of the particle formation process to be made, including the period after initial shell formation. The early particle formation process for this system was controlled by the diffusion of cellulose acetate butyrate in the liquid phase, whereas later stages of the process were dominated by shell buckling and folding.
Subject(s)
Chemistry, Pharmaceutical/methods , Drug Delivery Systems , Nanoparticles/chemistry , Cellulose/analogs & derivatives , Cellulose/chemistry , Chemistry, Pharmaceutical/instrumentation , Desiccation , Drug Compounding/methods , Dry Powder Inhalers , Microspheres , Particle Size , Surface Properties , TemperatureABSTRACT
PURPOSE: Deposition of drug emitted from two commercially available inhalers was measured in an in vitro child oral airway model and compared to existing in vivo data to examine the ability of the child model to replicate in vivo deposition. METHODS: In vitro deposition of drug from a QVAR® pressurized metered dose inhaler (pMDI) and Pulmicort® Turbuhaler® dry powder inhaler (DPI) in an Idealized Child Throat (1) and downstream filter was measured using UV spectroscopy and simulated realistic breathing profiles. Potential effects of ambient relative humidity ranging from 10% to 90% on deposition were also considered. RESULTS: In vitro QVAR pMDI deposition in the idealized mouth-throat at 50% RH (39.2 ± 2.3% of delivered dose) compared well (p>0.05) with in vivo extrathoracic deposition in asthmatic children age 8 to 14 (45.8 ± 12.3%). In vitro Turbuhaler DPI deposition in the idealized mouth-throat at 50% RH (69.0 ± 1.5%) matched in vivo extrathoracic deposition (p>0.05) in 6 to 16 year old children with cystic fibrosis (70.4 ± 21.2%). The effects of ambient humidity were found to be insignificant for Turbuhaler and minor for QVAR. CONCLUSIONS: The Idealized Child Throat successfully mimics in vivo deposition data in school age children for the inhalers tested, and may provide a standard platform for optimizing pediatric treatment with inhaled pharmaceutical aerosols.
Subject(s)
Aerosols/pharmacokinetics , Pharynx/anatomy & histology , Pharynx/metabolism , Respiratory System/metabolism , Administration, Inhalation , Child , Environment , Humans , Humidity , Models, Anatomic , Nebulizers and VaporizersABSTRACT
PURPOSE: A fundamental approach incorporating current theoretical models into aerosol formulation design potentially reduces experimental work for complex formulations. A D-amino acid mixture containing D-Leucine (D-Leu), D-Methionine, D-Tryptophan, and D-Tyrosine was selected as a model formulation for this approach. METHODS: Formulation design targets were set, with the aim of producing a highly dispersible D-amino acid aerosol. Particle formation theory and a spray dryer process model were applied with boundary conditions to the design targets, resulting in a priori predictions of particle morphology and necessary spray dryer process parameters. Two formulations containing 60% w/w trehalose, 30% w/w D-Leu, and 10% w/w remaining D-amino acids were manufactured. RESULTS: The design targets were met. The formulations had rugose and hollow particles, caused by deformation of a crystalline D-Leu shell while trehalose remained amorphous, as predicted by particle formation theory. D-Leu acts as a dispersibility enhancer, ensuring that both formulations: 1) delivered over 40% of the loaded dose into the in vitro lung region, and 2) achieved desired values of lung airway surface liquid concentrations based on lung deposition simulations. CONCLUSIONS: Theoretical models were applied to successfully achieve complex formulations with design challenges a priori. No further iterations to the design process were required.
Subject(s)
Aerosols/chemistry , Lung/metabolism , Powders/chemistry , Amino Acids/chemistry , Chemistry, Pharmaceutical/methods , Drug Delivery Systems/methods , Dry Powder Inhalers/methods , Excipients/chemistry , Technology, Pharmaceutical/methods , Trehalose/chemistryABSTRACT
INTRODUCTION: The nose has been receiving increased attention as a route for drug delivery. As the site of deposition constitutes the first point of contact of the body with the drug, characterization of the regional deposition of intranasally delivered droplets or particles is paramount to formulation and device design of new products. AREAS COVERED: This review article summarizes the recent literature on intranasal regional drug deposition evaluated in vivo, in vitro and in silico, with the aim of correlating parameters measured in vitro with formulation and device performance. We also highlight the relevance of regional deposition to two emerging applications: nose-to-brain drug delivery and intranasal vaccines. EXPERT OPINION: As in vivo studies of deposition can be costly and time-consuming, researchers have often turned to predictive in vitro and in silico models. Variability in deposition is high due in part to individual differences in nasal geometry, and a complete predictive model of deposition based on spray characteristics remains elusive. Carefully selected or idealized geometries capturing population average deposition can be useful surrogates to in vivo measurements. Continued development of in vitro and in silico models may pave the way for development of less variable and more effective intranasal drug products.
Subject(s)
Administration, Intranasal , Computer Simulation , Drug Delivery Systems , Humans , Animals , Pharmaceutical Preparations/administration & dosage , Pharmaceutical Preparations/chemistry , Vaccines/administration & dosage , Vaccines/pharmacokinetics , Nasal Mucosa/metabolism , Equipment Design , Models, Biological , Chemistry, Pharmaceutical/methods , Tissue Distribution , Nasal Cavity/metabolismABSTRACT
Designing spray-dried particles for inhalation aims at specific physicochemical properties including a respirable aerodynamic diameter and adequate powder dispersibility. Leucine, an amphiphilic amino acid, has been shown to aid in optimizing bulk powder properties. Mannitol, a model crystalline active and common bulking agent, was co-sprayed with leucine at several excipient ratios, ethanol/water ratios, and spray dryer outlet temperatures in order to experimentally probe the underlying particle formation mechanisms in this binary crystalline system. During the droplet drying of two crystallizing components, the material that nucleates first will preferentially enrich the surface. It is desired to have a completely crystalline leucine shell to improve powder properties, however, mannitol competes with leucine for the surface depending on excipient concentration and manufacturing parameters. The resulting particles were studied initially and at a two-month timepoint via solid state characterization, visual analysis, and particle size analysis in order to detect changes in bulk powder properties. It was determined that, similar to systems where only leucine can crystallize, initial leucine saturation in the formulation dictates powder characteristics.
ABSTRACT
Carrier-free spray-dried dispersions for pulmonary delivery, for which the demand is growing, frequently require the incorporation of dispersibility-enhancing excipients into the formulations to improve the efficacy of the dosage form. One of the most promising of such excipients, L-leucine, is expected to be approved for inhalation soon and has been studied exhaustively. However, during stability, small fibers protruding from the particles of leucine-containing powders have occasionally been observed. To clarify the origin of these fibers and assess their potential influence on the performance of the powders, three different classes of spray-dried leucine-containing formulation systems were studied over an 8-month accelerated stability program. These systems consisted of a large molecule biologic (bevacizumab) in conjunction with a glass former (trehalose), an amorphous small-molecular mass active (moxidectin), and a crystallizing active (mannitol). It was determined that the appearance of the fibers was due to the presence of small quantities of leucine in higher energy states, either because these were amorphous or present as a less stable crystalline polymorph. It was further shown that the growth of these leucine fibers caused no significant physicochemical instability in the powders. Nor, more importantly, did it decrease their aerosol performance in a dry powder inhaler or reduce the concentration of their active pharmaceutical ingredients.
ABSTRACT
Engineered porous phospholipid microparticles with aerodynamic diameters in the respirable range of 1-2 µm were cosuspended in 1,1,1,2-tetrafluoroethane, a propellant, with microcrystals of glycopyrrolate, formoterol fumarate dihydrate, or Mometasone furoate-three drugs with different solubilities in the propellant, and different physical, chemical, and pharmacological attributes. The drug microcrystals were added individually, in pairs, or all three together to prepare different cosuspensions, contained in a pressurized metered dose inhaler (pMDI). The drug microcrystals irreversibly associated with the porous particles, and the resultant cosuspensions possessed greatly improved suspension stability compared with suspensions of drug microcrystals alone. In general, all cosuspensions showed efficient dose delivery of the drugs, with fine particle fractions of more than 60% for a wide range of doses, including those as low as 300 ng per inhaler actuation. In the cosuspension pMDIs, comparable fine particle fractions were delivered for all tested drugs, whether or not they were emitted from an inhaler containing one, two, or three drugs. We demonstrate that the cosuspension approach solves at least three long-standing problems in the clinical development of pMDI-based products: (1) dose and drug dependent delivery efficiency, (2) inability to formulate dose strengths below 1 µg to fully explore drug efficacy and safety, and (3) combination suspensions delivering a different fine particle fraction than individual drug suspensions.
Subject(s)
Ethanolamines/chemistry , Fumarates/chemistry , Glycopyrrolate/chemistry , Metered Dose Inhalers , Phospholipids/chemistry , Pregnadienediols/chemistry , Respiratory Therapy , Drug Delivery Systems , Formoterol Fumarate , Hydrocarbons, Fluorinated/chemistry , Mometasone Furoate , Particle Size , Porosity , Solubility , Surface Properties , Water/chemistryABSTRACT
Vaccines are a very important tool in the effort to reduce the global burden of infectious diseases. Modern vaccines can be formulated in several ways to induce specific immunity, including through the use of live bacteria, subunit antigens, and even genetic material. However, vaccines typically need to be transported and stored under controlled refrigerated or frozen conditions to maintain potency. This strict temperature control is incompatible with the available infrastructure in many developing countries. One method of improving the thermostability of a vaccine is through drying of a liquid presentation into a dry dosage form. In addition to enhancing the capability for distribution in resource-poor settings, these dry vaccine forms are more suitable for long-term stockpiling. Spray drying is a drying method that has been successfully used to stabilize many experimental vaccines into a dry form for storage above refrigerated temperatures. Additionally, the use of spray drying allows for the production of engineered particles suitable for respiratory administration. These particles can be further designed for increased out-of-package robustness against high humidity. Furthermore, there are already commercial dry powder delivery devices available that can be used to safely deliver vaccines to the respiratory system. The research in this field demonstrates that the resources to develop highly stable vaccines in flexible dosage forms are available and that these presentations offer many advantages for global vaccination campaigns.
Subject(s)
Spray Drying , Vaccines , Administration, Inhalation , Drug Compounding , Particle Size , Powders/chemistry , Vaccines/chemistryABSTRACT
Administration of biologics such as proteins, vaccines, and phages via the respiratory route is becoming increasingly popular. Inhalable powder formulations for the successful delivery of biologics must first ensure both powder dispersibility and physicochemical stability. A lipid-based inhalable microparticle platform combining the stability advantages offered by dry powder formulations and high dispersibility afforded by a rugose morphology was spray dried and tested. A new simplified spray drying method requiring no organic solvents or complicated feedstock preparation processes was introduced for the manufacture of the microparticles. Trehalose was selected to form the amorphous particle core, because of its well-known ability to stabilize biologics, and also because of its ability to serve as a surrogate for small molecule actives. Phospholipid distearoyl phosphatidylcholine (DSPC), the lipid component in this formulation, was used as a shell former to improve powder dispersibility. Effectiveness of the lipid excipient in modifying trehalose particle morphology and enhancing powder dispersibility was evaluated at different lipid mass fractions (5%, 10%, 25%, 50%) and compared with that of several previously published shell-forming excipients at their effective mass fractions, i.e., 5% trileucine, 20% leucine, and 40% pullulan. A strong dependence of particle morphology on the lipid mass fraction was observed. Particles transitioned from typical smooth spherical trehalose particles without lipid to highly rugose microparticles at higher lipid mass fractions (>5%). In vitro aerosol performance testing demonstrated a significant improvement of powder dispersibility even at lipid mass fractions as low as 5%. Powder formulations with excellent aerosol performance comparable to those modified with leucine and trileucine were achieved at higher lipid mass fractions (>25%). A model biologic-containing formulation with 35% myoglobin, 35% glass stabilizer (trehalose), and 30% lipid shell former was shown to produce highly rugose particle structure as designed and excellent aerosol performance for efficient pulmonary delivery. A short-term stability at 40 °C proved that this protein-containing formulation had good thermal stability as designed. The results demonstrated great potential for the new lipid microparticle as a platform for the delivery of both small-molecule APIs and large-molecule biologics to the lung.
Subject(s)
Biological Products , Excipients , Administration, Inhalation , Aerosols/chemistry , Dry Powder Inhalers , Excipients/chemistry , Feasibility Studies , Leucine/chemistry , Lipids , Particle Size , Powders/chemistry , Trehalose/chemistryABSTRACT
Background: Decontamination and reuse of respirators have been proposed to mitigate the shortage of respirators during pandemics. The U.S. National Institute for Occupational Safety and Health (NIOSH)'s respirator filtration efficiency (FE) test has been used to confirm that decontamination procedures maintain minimum FE above 95% for N95s and similar respirators. However, it was hypothesized that the limited range of test particle sizes may not include the most penetrating particle size (MPPS) for all respirators, especially after decontamination by moist heat incubation (MHI). Materials and Methods: A custom-designed apparatus was used to measure size-specific FE for respirators across particle size bins between aerodynamic diameter of 0.07 and 1.97 µm using an electrical low-pressure impactor. FEs were measured for two N95 respirator models before and after 10 cycles of MHI. In addition, pressure drop through the respirator materials and scanning electron microscope (SEM) images of respirator layers were obtained before and after MHI. Results: For Kimtech™ brand N95 respirators, FE was not reduced at any size after MHI. For Safe Life brand N95s, FE was below 95% before MHI and decreased significantly after MHI. The MPPS for this respirator was outside the range defined in NIOSH test protocol, and increased after MHI. There was no appreciable change to the pressure drop through the two respirator models after MHI, nor was any deterioration in fiber integrity visible in SEM images. Conclusions: Based on the results of the present study and other studies in the literature, MHI can be used to decontaminate respirators without significant decrease in FE. However, potential effects of MHI on FE need to be assessed for each respirator model. The ability to evaluate size-specific FE across a wide range of particle sizes is important in identifying the MPPS and associated FE of respirators before and after MHI.
Subject(s)
COVID-19 , Respiratory Protective Devices , Administration, Inhalation , Decontamination/methods , Hot Temperature , Humans , N95 Respirators , SARS-CoV-2 , United StatesABSTRACT
Amebiasis, a disease caused by the parasite Entamoeba histolytica, is estimated to cause millions of infections and at least 55,000 deaths globally each year. With no vaccine currently available, there is an urgent need for an accessible means of stimulating protective mucosal immunity. The objective of this study was to characterize the nasal spray of a novel amebiasis vaccine candidate from a syringe-based liquid atomization device, the Teleflex MAD Nasal™, in both adult and infant nasal airways. Human ergonomic testing was completed to determine realistic actuation parameters. Spray pattern, plume geometry, and droplet size distribution were measured to evaluate reproducibility of free plume characteristics. The Alberta Idealized Nasal Inlet (AINI) and three realistic infant nasal airways were used to determine the in vitro deposition profile in adult and infant airways, respectively. Collectively, in vitro results demonstrated the feasibility of delivering the vaccine candidate to target sites within the nasal airways. Penetration through the nasal airways that could lead to deposition in the lungs was below the limit of quantification for both adult and infant geometries, indicating a low likelihood of adverse events due to lung exposure. These results support continued investigation of intranasal delivery of the synthetic Entamoeba histolytica vaccine.