ABSTRACT
Metal-organic frameworks (MOFs) offer disruptive potential in micro- and optoelectronics because of the unique properties of these microporous materials. Nanoscale patterning is a fundamental step in the implementation of MOFs in miniaturized solid-state devices. Conventional MOF patterning methods suffer from low resolution and poorly defined pattern edges. Here, we demonstrate the resist-free, direct X-ray and electron-beam lithography of MOFs. This process avoids etching damage and contamination and leaves the porosity and crystallinity of the patterned MOFs intact. The resulting high-quality patterns have excellent sub-50-nm resolution, and approach the mesopore regime. The compatibility of X-ray and electron-beam lithography with existing micro- and nanofabrication processes will facilitate the integration of MOFs in miniaturized devices.
ABSTRACT
A series of borosilicates was synthesized, where the structure of the borosilicate core was easily modulated using two strategies: blocking of condensation sites and controlling the stoichiometry of the reaction. Thus, on the one hand, the condensation of phenylboronic or 3-hydroxyphenylboronic acid with diacetoxysilylalkoxide [(tBuO)(Ph3CO)Si(OAc)2] led to the formation of borosilicates (tBuO)(Ph3CO)Si{(µ-O)BPh}2(µ-O) (1), [{(tBuO)(Ph3CO)Si(µ-O)BPh(µ-O)}2] (2), and [{(tBuO)(Ph3CO)Si(µ-O)B(3-HOPh)(µ-O)}2] (3) with a cyclic inorganic B2SiO3 or B2Si2O4 core, respectively. On the other hand, the reaction of phenylboronic acid with triacetoxysilylalkoxide (Ph3CO)Si(OAc)3 in 3:2 ratio resulted in the formation of a cagelike structure [{(Ph3CO)Si(µ-O)2BPh(µ-O)}2] (4) with B4Si4O10 core, while the reaction of the boronic acid with silicon tetraacetate generated an unusual 1,3-bis(acetate)-1,3-diphenyldiboraxane PhB(µ-O)(µ-O,O'-OAc)2BPh (5). Additionally, compound 1 was used to evaluate the possibility to form NâB donor-acceptor bond between the boron atom in the borosilicates and a nitrogen donor. Thus, coordination of 1 with piperazine yielded a tricyclic [{(tBuO)(Ph3CO)Si(OBPh)2(µ-O)}2·C4H10N2] compound 6 with two borosilicate rings bridged by a piperazine molecule. Finally, the processes involved in the formation of the six- and eight-membered rings (B2SiO3 and B2Si2O4) in compounds 1 and 2 were explored using solution 1H NMR studies and density functional theory calculations. These molecules represent to the best of our knowledge first examples of cyclic molecular borosilicates containing SiO4 units.
ABSTRACT
The field of metal-organic frameworks (MOFs) has progressed beyond the design and exploration of powdery and single-crystalline materials. A current challenge is the fabrication of organized superstructures that can harness the directional properties of the individual constituent MOF crystals. To date, the progress in the fabrication methods of polycrystalline MOF superstructures has led to close-packed structures with defined crystalline orientation. By controlling the crystalline orientation, the MOF pore channels of the constituent crystals can be aligned along specific directions: these systems possess anisotropic properties including enhanced diffusion along specific directions, preferential orientation of guest species, and protection of functional guests. In this perspective, we discuss the current status of MOF research in the fabrication of oriented polycrystalline superstructures focusing on the specific crystalline directions of orientation. Three methods are examined in detail: the assembly from colloidal MOF solutions, the use of external fields for the alignment of MOF particles, and the heteroepitaxial ceramic-to-MOF growth. This perspective aims at promoting the progress of this field of research and inspiring the development of new protocols for the preparation of MOF systems with oriented pore channels, to enable advanced MOF-based devices with anisotropic properties.
ABSTRACT
Films and patterns of 3D-oriented metal-organic frameworks (MOFs) afford well-ordered pore structures extending across centimeter-scale areas. These macroscopic domains of aligned pores are pivotal to enhance diffusion along specific pathways and orient functional guests. The anisotropic properties emerging from this alignment are beneficial for applications in ion conductivity and photonics. However, the structure of 3D-oriented MOF films and patterns can rapidly degrade under humid and acidic conditions. Thus, more durable 3D-ordered porous systems are desired for practical applications. Here, oriented porous polymer films and patterns are prepared by using heteroepitaxially oriented N3-functionalized MOF films as precursor materials. The film fabrication protocol utilizes an azide-alkyne cycloaddition on the Cu2(AzBPDC)2DABCO MOF. The micropatterning protocol exploits the X-ray sensitivity of azide groups in Cu2(AzBPDC)2DABCO, enabling selective degradation in the irradiated areas. The masked regions of the MOF film retain their N3-functionality, allowing for subsequent cross-linking through azide-alkyne coupling. Subsequent acidic treatment removes the Cu ions from the MOF, yielding porous polymer micro-patterns. The polymer has high chemical stability and shows an anisotropic fluorescent response. The use of 3D-oriented MOF systems as precursors for the fabrication of oriented porous polymers will facilitate the progress of optical components for photonic applications.
ABSTRACT
Micropatterning crystalline materials with oriented pores is necessary for the fabrication of devices with anisotropic properties. Crystalline and porous metal-organic frameworks (MOFs) are ideal materials as their chemical and structural mutability enables precise tuning of functional properties for applications ranging from microelectronics to photonics. Herein, a patternable oriented MOF film is designed: by using a photomask under X-ray exposure, the MOF film decomposes in the irradiated areas, remaining intact in the unexposed regions. The MOF film acts simultaneously as a resist and as functional porous material. While the heteroepitaxial growth from aligned Cu(OH)2 nanobelts is used to deposit oriented MOF films, the sensitivity to radiation is achieved by integrating a brominated dicarboxylate ligand (Br2 BDC) into a copper-based MOF Cu2 L2 DABCO (DABCO = 1,4-diazabicyclo[2.2.2]octane; L = BDC/Br2 BDC). The lithographed samples act as diffraction gratings upon irradiation with a laser, thus confirming the quality of the extended MOF micropattern. Furthermore, the oriented MOF patterns are functionalized with fluorescent dyes. As a result, by rotating the polarization angle of the laser excitation, the alignment of the dye in the MOF is demonstrated. By controlling the functional response to light, this MOF patterning protocol can be used for the microfabrication of optical components for photonic devices.
ABSTRACT
Metal-organic framework (MOF) coatings on cells enhance viability in cytotoxic environments. Here, we show how protective multi-layered MOF bio-composite shells on a model cell system (yeast) enhance the proliferation of living cells exposed to hostile protease-rich environments via the dissolution of the shells and release of a protease inhibitor (antitrypsin).
Subject(s)
Antineoplastic Agents , Metal-Organic Frameworks , Antineoplastic Agents/pharmacology , Cell Survival , Metal-Organic Frameworks/pharmacologyABSTRACT
Reaction between the silanediol (HO)(2)Si(OtBu)(2) and gallium amides, LGaCl(NHtBu) and LGa(NHEt)(2) (L = [HC{C(Me)N(Ar)}(2)](-), Ar = 2,6-iPr(2)C(6)H(3)), respectively, resulted in the facile isolation of molecular gallosilicates LGaCl(µ-O)Si(OH)(OtBu)(2) (1) and LGa(NHEt)(µ-O)Si(OH)(OtBu)(2) (2). Compound 2 easily reacts with 1 equiv of water to form the unique gallosilicate-hydroxide LGa(OH·THF)(µ-O)Si(OH)(OtBu)(2) (3). Compounds 1-3 contain the simple Ga-O-SiO(3) framework and are the first structurally authenticated molecular gallosilicates. These compounds may be used not only as models for gallosilicate-based materials but also as further reagents because of the presence of reactive functional groups attached to both gallium and silicon atoms. Accordingly, seven molecular heterometallic compounds were obtained from the reactions between compound 3 and group 4 amides M(NMe(2))(4) (M = Ti, Zr) or M(NEt(2))(4) (M = Ti, Zr, Hf). Hence, by tuning the reactions conditions and stoichiometries, it was possible to isolate and structurally characterize the complete 1:1 and 2:1 series (4-10). Completely inorganic cores of types M-O-Ga-O-Si-O and spiro M[O-Ga-O-Si-O](2) were obtained and characterized by common spectroscopic techniques.
ABSTRACT
MOFs are promising candidates for the capture of toxic gases since their adsorption properties can be tuned as a function of the topology and chemical composition of the pores. Although the main drawback of MOFs is their vulnerability to these highly corrosive gases which can compromise their chemical stability, remarkable examples have demonstrated high chemical stability to SO2, H2S, NH3 and NO x . Understanding the role of different chemical functionalities, within the pores of MOFs, is the key for accomplishing superior captures of these toxic gases. Thus, the interactions of such functional groups (coordinatively unsaturated metal sites, µ-OH groups, defective sites and halogen groups) with these toxic molecules, not only determines the capture properties of MOFs, but also can provide a guideline for the desigh of new multi-functionalised MOF materials. Thus, this perspective aims to provide valuable information on the significant progress on this environmental-remediation field, which could inspire more investigators to provide more and novel research on such challenging task.
ABSTRACT
Glycosaminoglycans (GAGs) are biomacromolecules necessary for the regulation of different biological functions. In medicine, GAGs are important commercial therapeutics widely used for the treatment of thrombosis, inflammation, osteoarthritis and wound healing. However, protocols for the encapsulation of GAGs in MOFs carriers are not yet available. Here, we successfully encapsulated GAG-based clinical drugs (heparin, hyaluronic acid, chondroitin sulfate, dermatan sulfate) and two new biotherapeutics in preclinical stage (GM-1111 and HepSYL proteoglycan) in three different pH-responsive metal-azolate frameworks (ZIF-8, ZIF-90, and MAF-7). The resultant GAG@MOF biocomposites present significant differences in terms of crystallinity, particle size, and spatial distribution of the cargo, which influences the drug-release kinetics upon applying an acidic stimulus. For a selected system, heparin@MOF, the released therapeutic retained its antithrombotic activity while the MOF shell effectively protects the drug from heparin lyase. By using different MOF shells, the present approach enables the preparation of GAG-based biocomposites with tunable properties such as encapsulation efficiency, protection and release.
ABSTRACT
The Sc(III) MOF-type MFM-300(Sc) is demonstrated in this study to be stable under physiological conditions (PBS), biocompatible (to human skin cells), and an efficient drug carrier for the long-term controlled release (through human skin) of antioxidant ferulate. MFM-300(Sc) also preserves the antioxidant pharmacological effects of ferulate while enhancing the bio-preservation of dermal skin fibroblasts, during the delivery process. These discoveries pave the way toward the extended use of Sc(III)-based MOFs as drug delivery systems (DDSs).