Catalase Detection via Membrane-Based Pressure Sensors.

Membrane-based sensors (MePSs) exhibit remarkable precision and sensitivity in detecting pressure changes. MePSs are commonly used to monitor catalytic reactions in solution, generating gas products crucial for signal amplification in bioassays. They also allow for catalyst quantification by indirectly measuring the pressure generated by the gaseous products. This is particularly interesting for detecting enzymes in biofluids associated with disease onset. To enhance the performance of a MePS, various structural factors influence membrane flexibility and response time, ultimately dictating the device's pressure sensitivity. In this study, we fabricated MePSs using polydimethylsiloxane (PDMS) and investigated how structural modifications affect the Young's modulus (E) and residual stress (σ0) of the membranes. These modifications have a direct impact on the sensors' sensitivity to pressure variations, observed as a function of the volume of the chamber (Σ) or of the mechanical properties of the membrane itself (S). MePSs exhibiting the highest sensitivities were then employed to detect catalyst quantities inducing the dismutation of hydrogen peroxide, producing dioxygen as a gaseous product. As a result, a catalase enzyme was successfully detected using these optimized MePSs, achieving a remarkable sensitivity of (22.7 ± 1.2) µm/nM and a limit of detection (LoD) of 396 pM.

Highly Sensitive Membrane-Based Pressure Sensors (MePS) for Real-Time Monitoring of Catalytic Reactions.

Functional, flexible, and integrated lab-on-chips, based on elastic membranes, are capable of fine response to external stimuli, so to pave the way for many applications as multiplexed sensors for a wide range of chemical, physical and biomedical processes. Here, we report on the use of elastic thin membranes (TMs), integrated with a reaction chamber, to fabricate a membrane-based pressure sensor (MePS) for reaction monitoring. In particular, the TM becomes the key-element in the design of a highly sensitive MePS capable to monitor gaseous species production in dynamic and temporally fast processes with high resolution and reproducibility. Indeed, we demonstrate the use of a functional MePS integrating a 2 µm thick polydimethylsiloxane TM by monitoring the dioxygen evolution resulting from catalytic hydrogen peroxide dismutation. The operation of the membrane, explained using a diffusion-dominated model, is demonstrated on two similar catalytic systems with catalase-like activity, assembled into polyelectrolyte multilayers capsules. The MePS, tested in a range between 2 and 50 Pa, allows detecting a dioxygen variation of the µmol L-1 s-1 order. Due to their structural features, flexibility of integration, and biocompatibility, the MePSs are amenable of future development within advanced lab-on-chips.

Catalytic self-propulsion of supramolecular capsules powered by polyoxometalate cargos.

Multicompartment, spherical microcontainers were engineered through a layer-by-layer polyelectrolyte deposition around a fluorescent core while integrating a ruthenium polyoxometalate (Ru4POM), as molecular motor, vis-à-vis its oxygenic, propeller effect, fuelled upon H2O2 decomposition. The resulting chemomechanical system, with average speeds of up to 25 µm s(-1), is amenable for integration into a microfluidic set-up for mixing and displacement of liquids, whereby the propulsion force and the resulting velocity regime can be modulated upon H2O2-controlled addition.

Direct detection of minimum ionizing charged particles in a perovskite single crystal detector with single particle sensitivity.

We report the detection of high energy electrons of some hundreds of MeV, crossing a methylammonium lead bromide single crystal device with sensitivity down to a single electron. In the device, the released energy is close to the energy released by minimum-ionizing particles. This is the first demonstration of a perovskite-based device that can be used for tracking and counting minimum-ionizing charged particles. The device reaches single particle sensitivity with a low bias voltage of 5 V. It also shows a good linearity of the response as a function of the number of electrons in a dynamic range of approximately 104.

A microfluidic method for passive trapping of sperms in microstructures.

Sperm motility is a prerequisite for male fertility. Enhancing the concentration of motile sperms in assisted reproductive technologies - for human and animal reproduction - is typically achieved through aggressive methods such as centrifugation. Here, we propose a passive technique for the amplification of motile sperm concentration, with no externally imposed forces or flows. The technique is based on the disparity between probability rates, for motile cells, of entering and escaping from complex structures. The effectiveness of the technique is demonstrated in microfluidic experiments with microstructured devices, comparing the trapping power in different geometries. In these micro-traps, we observe an enhancement of cells' concentration close to 10, with a contrast between motile and non-motile cells increased by a similar factor. Simulations of suitable interacting model sperms in realistic geometries reproduce quantitatively the experimental results, extend the range of observations and highlight the components that are key to the optimal trap design.

Live-cell-permeant thiophene fluorophores and cell-mediated formation of fluorescent fibrils.

In our search for thiophene fluorophores that can overcome the limits of currently available organic dyes in live-cell staining, we synthesized biocompatible dithienothiophene-S,S-dioxide derivatives (DTTOs) that were spontaneously taken up by live mouse embryonic fibroblasts and HeLa cells. Upon treatment with DTTOs, the cells secreted nanostructured fluorescent fibrils, while cell viability remained unaltered. Comparison with the behavior of other cell-permeant, newly synthesized thiophene fluorophores showed that the formation of fluorescent fibrils was peculiar to DTTO dyes. Laser scanning confocal microscopy of the fluorescent fibrils showed that most of them were characterized by helical supramolecular organization. Electrophoretic analysis and theoretical calculations suggested that the DTTOs were selectively recognized by the HyPro component of procollagen polypeptide chains and incorporated through the formation of multiple H-bondings.

Wetting Properties of Graphene Aerogels.

Graphene hydrophobic coatings paved the way towards a new generation of optoelectronic and fluidic devices. Nevertheless, such hydrophobic thin films rely only on graphene non-polar surface, rather than taking advantage of its surface roughness. Furthermore, graphene is typically not self-standing. Differently, carbon aerogels have high porosity, large effective surface area due to their surface roughness, and very low mass density, which make them a promising candidate as a super-hydrophobic material for novel technological applications. However, despite a few works reporting the general super-hydrophobic and lipophilic behavior of the carbon aerogels, a detailed characterization of their wetting properties is still missing, to date. Here, the wetting properties of graphene aerogels are demonstrated in detail. Without any chemical functionalization or patterning of their surface, the samples exhibit a super-lipophilic state and a stationary super-hydrophobic state with a contact angle up to 150 ± 15° and low contact angle hysteresis  ≈ 15°, owing to the fakir effect. In addition, the adhesion force of the graphene aerogels in contact with the water droplets and their surface tension are evaluated. For instance, the unique wettability and enhanced liquid absorption of the graphene aerogels can be exploited for reducing contamination from oil spills and chemical leakage accidents.

Self-organization, optical, and electrical properties of alpha-quinquethiophene-dinucleotide conjugates.

The synthesis and properties of (5')TA(3')-t5 (8a) and (5')CG(3')-t5 (8b) conjugates, in which the self-complementary dinucleotides TA and CG are covalently bound to the central ring of alpha-quinquethiophene (t5), are described. According to molecular mechanics calculations, the preferred conformation of both 8a and 8b is that with the dinucleotide folded over the planar t5 backbone, with the nucleobases facing t5 at stacking distance. The calculations show that the aggregation process of 8a and 8b is driven by a mix of nucleobase-thiophene interactions, hydrogen bonding between nucleobases (non Watson-Crick (W&C) in TA, and W&C in CG), van der Waals, and electrostatic interactions. While 8b is scarcely soluble in any solvents, 8a is soluble in water, indicating that the aggregates of the former are more stable than those of the latter. Microfluidic-induced self-assembly studies of 8a showed the formation of lamellar, spherulitic, and dendritic supramolecular structures, depending on the concentration and solvent evaporation time. The self-assembled structures displayed micrometer dimensions in the xy plane of the substrate and nanometer dimensions in the z direction. Spatially resolved confocal microscopy and spectroscopy showed that the aggregates were characterized by intense fluorescence emission. Cast films of 8a from water solutions showed chirality transfer from the dinucleotide to t5. The hole mobility of the cast films of 8a was estimated using a two-electrode device under high vacuum and found to be up to two orders of magnitude greater than those previously measured for dinucleotide-quarterthiophene conjugates under the same experimental conditions.

Ultimate Photo-Thermo-Acoustic Efficiency of Graphene Aerogels.

The ability to generate, amplify, mix, and modulate sound with no harmonic distortion in a passive opto-acoustic device would revolutionize the field of acoustics. The photo-thermo-acoustic (PTA) effect allows to transduce light into sound without any bulk electro-mechanically moving parts and electrical connections, as for conventional loudspeakers. Also, PTA devices can be integrated with standard silicon complementary metal-oxide semiconductor (CMOS) fabrication techniques. Here, we demonstrate that the ultimate PTA efficiency of graphene aerogels, depending on their particular thermal and optical properties, can be experimentally achieved by reducing their mass density. Furthermore, we illustrate that the aerogels behave as an omnidirectional pointsource throughout the audible range with no harmonic distortion. This research represents a breakthrough for audio-visual consumer technologies and it could pave the way to novel opto-acoustic sensing devices.

Physiological formation of fluorescent and conductive protein microfibers in live fibroblasts upon spontaneous uptake of biocompatible fluorophores.

We have recently reported initial results concerning an original approach to introduce additional properties into fibrillar proteins produced by live fibroblasts and extruded into the ECM. The key to such an approach was biocompatible, fluorescent and semiconducting synthetic molecules which penetrated spontaneously the cells and were progressively encompassed via non-bonding interactions during the self-assembly process of the proteins, without altering cell viability and reproducibility. In this paper we demonstrate that the intracellular secretion of fluorescent microfibers can be generalized to living primary and immortalized human/mouse fibroblasts. By means of real-time single-cell confocal microscopy we show that the fluorescent microfibers, most of which display helical morphology, are generated by intracellular coding of the synthetic molecules. We also describe co-localization experiments on the fluorescent microfibers isolated from the cell milieu demonstrating that they are mainly made of type-I collagen. Finally, we report experimental data indicating that the embedded synthetic molecules cause the proteins not only to be fluorescent but also capable of electrical conductivity.

Bicolor electroluminescent pixels from single active molecular material.

We report on the fabrication of the first bicolor micropixelated OLED from a single molecular material using a single-step bottom up procedure. The implementation of a deposition technique, based on a spatial-switch and conformational-sensitive STD surface-tension-driven lithography, has allowed us to exploit the spontaneous supramolecular properties and the conformational flexibility of a conjugated thiophene-based material, 6-bis-(50-hexyl-[2, 20]bithiophen-5-yl)-3, 5-dimethyl-dithieno[3, 2-b; 20, 30-d]thiophene (DTT7Me). The existence of two regularly alternating emitting regions on a micrometer scale allows obtaining electroluminescent emission at two different wavelengths from a single material.

Engineering transfer of micro- and nanometer-scale features by surface energy modification.

Micropatterning of surfaces is gaining importance in various applications ranging from biosensors to microfluidic and lab-on-a-chip devices, where the control of the surface chemistry is of great importance for the application. In this paper, we introduce a patterning technique of topographical features, which is applicable on different substrates by modifying their surface energy. The textured surface is obtained via polydimethylsiloxane (PDMS) transfer, and the topographical parameters can be systematically tailored by selective treatment with oxygen plasma of either the PDMS stamp, the substrate, or both. Our approach is an alternative technique to create micro- and nanopatterns of various height and shape over a large area on different substrates. The possibility to control cell behavior on different surfaces tailored with this microtransfer patterning approach was also evaluated. The cell culture on patterned surfaces showed the possibility of modulating cell adhesion. Our method is based on simple transfer of silicone elastomeric patterns to the surface, and therefore, it is very simple and fast compared to other complex techniques. These observations could have implications for tissue-scaffold engineering science in areas such as microfluidic devices and control of cell adhesion.

Superhydrophobicity due to the hierarchical scale roughness of PDMS surfaces.

Wettability control has been widely investigated in the last decades for technological applications such as microfluidic devices and self-cleaning surfaces by modifying both the chemical composition and the geometric structure of the surfaces. Inspired by the typical morphology of superhydrophobic leaves (such as lotus leaves), we have developed a dual-scale roughness, micro- and nanosized, on polydimethylsiloxane (PDMS) surfaces. By combining different geometric parameters and plasma treatment conditions, the structures were controlled hierarchically, at different independent length scales. Both the microsized replicated pillars and the nanosized etched posts tuned the wettability of the PDMS surfaces in a very simple way, up to contact angles of 170 degrees . Furthermore, changes in the influence of micro- and nanoscale geometrical structures were investigated. Hysteresis and contact angles of water droplets are evaluated as a combined effect of micropillars and a superimposed roughness, resulting in high advancing contact angles and low sliding angles.

Influence of chemistry and topology effects on superhydrophobic CF(4)-plasma-treated poly(dimethylsiloxane) (PDMS).

Superhydrophobic surfaces are gaining considerable interest in a lot of different applications, and nonetheless, precise control over the wettability properties of such surfaces is still a challenge due to difficulties when controlling the effects independently induced on superhydrophobicity by the chemical and topological surface characteristics. We have fabricated engineered superhydrophobic surfaces onto poly(dimethylsiloxane) (PDMS) substrates by means of suitable CF4-plasma treatments. These treatments allowed the modification of both the morphological properties of the PDMS surface, due to a preferential etching of certain components of its macromolecules, and the chemical ones, by the deposition of a fluorinated layer. Chemical effects were separated from topological ones by performing a double replica molding process of the CF4-plasma-treated surfaces. This allowed us to obtain positive copies of the structured surfaces without the overlaying fluorinated coating affecting the surface chemistry. Such replicated surfaces showed a decrease of the contact angle if compared to the treated ones and therefore evidenced chemistry's weight in superhydrophobicity effects. In particular, we found that, for highly dense columnar-like PDMS microstructures, the effect of the plasma-deposited fluorinated layer covering surfaces produces an enhancement of the contact angle of about 20 degrees .

Microfluidic motion for a direct investigation of the structural dynamics of glass-forming liquids.

Glass-forming liquids, polymer solutions, and biofluids have additional inertial and elastic macroscopic degrees of freedom that are related to the elasticity of the molecular coils and affect the determination of the structural dynamical parameters. In this work, we propose a new approach for the direct evaluation of the fundamental material parameters (viscosity, fragility, glass transition temperature) of a viscoelastic liquid in a capillary flow inside a microfluidic device. The proposed technique substantially reduces the complexity of the theoretical analysis and provides an evaluation of the most relevant functional parameters of the fluid dynamics. Moreover, the approach allows the investigation of localization phenomena in geometrical confined systems, such as those required in miniaturized devices.