ABSTRACT
Incipient fault detection in a hydraulic system is a challenge in the condition monitoring community. Existing research mainly monitors abnormal working conditions in hydraulic systems by separately detecting the key working parameter, which often causes a high miss warning rate for incipient faults due to the oversight of parameter dependence. A principal component analysis provides an effective method for incipient fault detection by taking the correlation of multiple parameters into consideration, but this technique assumes the systems are Gaussian-distributed, making it invalid for a dynamic non-Gaussian system. In this paper, we combine a canonical variable analysis (CVA) and adaptive kernel density estimation (AKDE) for the early fault detection of nonlinear dynamic hydraulic systems. The collected hydraulic system data set was used to construct the typical variable space, and the state space and residual space are divided to represent the characteristics of different correlations between the two variables, which are quantitatively described using Hotelling's T2 and Q. In order to investigate the proper upper control limits, AKDE was utilised to estimate the underlying probability density functions of T2 and Q by taking the nonlinearity of the hydraulic system variables into consideration. The advantages of the proposed approach for incipient fault detection are illustrated via a marine power plant lubrication system.
ABSTRACT
BACKGROUND: The onset time of intracerebral hemorrhage (ICH) may be closely related to the working style and living habits of people, which are determined by different income sources in China. Therefore, the purpose of our study was to investigate the Circadian Variations in the occurrence of ICH from different sources of income. METHODS: This retrospective study enrolled 4,327 patients with first-ever ICH. Based on the time of day at which the patients developed symptoms, the classifiable onset time was assigned to one of eight three-hour intervals. And based on different income sources, they were categorized into three groups: Farmers, Wage-earners, and Freelancers. Demographic and risk factors of patients were then summarized, and the circadian variation of the 3 groups of patients' known time of onset and those stratified by sex and age were analyzed. RESULTS: The frequency of ICH onset exhibited significant circadian variation among the 3 income groups, demonstrating a bimodal distribution in the daytime, with a nadir during the night (all P < 0.001). Three groups showed a significant initial peak between 06:01 and 09:00, and the same peak was observed in their subgroups of sex and age. In the 3 income source groups, there was a smaller second peak that between 15:01 and 18:00 for Farmers and Wage-earners and 18:01 and 21:00 for Freelancers. After stratification by sex and age, the second peak was between 18:01 and 21:00 for female in Farmers, female in Freelancers, under 65 years of age in Wage-earners and 65 years or older in Freelancers, while 15:01 and 18:00 for the other groups. CONCLUSIONS: Different circadian variations of ICH onset time are found in patients with different income sources in southwest China's Chongqing Municipality cohort. Moreover, the frequency and distribution pattern of peak hours may be closely related to the working style and living habits of people with different income sources.
Subject(s)
Cerebral Hemorrhage/physiopathology , Circadian Rhythm/physiology , Socioeconomic Factors , Adolescent , Adult , Aged , Aged, 80 and over , Cerebral Hemorrhage/etiology , China , Cross-Sectional Studies , Female , Humans , Male , Middle Aged , Retrospective Studies , Risk FactorsABSTRACT
Coal and gas outbursts are among the most severe disasters threatening the safety of coal mines around the world. They are dynamic phenomena characterized by large quantities of coal and gas ejected from working faces within a short time. Numerous researchers have conducted studies on outburst prediction, and a variety of indices have been developed to this end. However, these indices are usually empirical or based on local experience, and the accurate prediction of outbursts is not feasible due to the complicated mechanisms of outbursts. This study conducts outburst experiments using large-scale multifunctional equipment developed in the laboratory to develop a more robust outburst prediction method. In this study, the coal temperature during the outburst process was monitored using temperature sensors. The results show that the coal temperature decreased rapidly as the outburst progressed. Meanwhile, the coal temperature in locations far from the outburst mouth increased. The coal broken in the stress concentration state is the main factor causing the abnormal temperature rise. The discovery of these phenomena lays a theoretical foundation and provides an experimental basis for an effective outburst prediction method. An outburst prediction method based on monitoring temperature was proposed, and has a simpler and faster operation process and is not easily disturbed by coal mining activities. What is more, the critical values of coal temperature rises or temperature gradients can be flexibly adjusted according to the actual situations of different coal mines to predict outbursts more effectively and accurately.
ABSTRACT
A new fluid alternative to slick water for fracturing shale gas can reduce the waste of water resources and improve the extraction efficiency, enabling volumetric fracturing. For the new fracturing technique, the experiments of different release pressures under pre-injection and for pre-injection were conducted using a self-designed true triaxial experimental system, and the pressure pulse curves were plotted to analyze the fracturing principle. The experimental results showed that: (1) the pressure rise curve in the reactor can be divided into five stages: initial reaction, linear pressure rise, rate slowdown, instantaneous pressure release, and residual pressure stages; (2) Pre-filling fracturing requires a smaller expansion ratio, weaker pressure degradation, resulting in better fracturing effect; (3) The increase in the initial fracture length leads to an increase in the pressure required to extend the fracture, and high-pressure subcritical water impact fracturing achieved fracture extension at a lower fluid pressure; (4) The fractal dimension has a strong linear relationship with fracture complexity, which is a new option when evaluating the fracturing effect. Volumetric fracturing allows for the creation of more tiny trenches that increase reservoir permeability, leading to better recovery of the reservoir's energy resources.
ABSTRACT
Due to the complexity of the strata, it is difficult to monitor and identify the disasters induced by rock fractures in the process of mining deep coal resources. This will seriously affect the safety and sustainable mining of coal. Therefore, it is necessary to understand the failure mechanisms and acoustic emission (AE) characteristics of different rocks. In this paper, uniaxial compression tests as well as simultaneous AE monitoring were carried out on four different rocks. The four rocks include yellow sandstone, white sandstone, marble and limestone. The mechanical properties, energy evolution and AE characteristics of different rocks were analysed. It is found that the AE response of rocks is closely related to the damage and fracture process. The more brittle the rock is, the less energy is dissipated before failure, and the less obvious the AE precursor is, and the RA-AF values can effectively characterise the failure modes of different rocks. Finally, the damage models were developed from the perspectives of AE energy and dissipated energy, respectively. The damage model based on dissipated energy can better reflect the stress and damage state of the rock, and the theoretical curves of stress-strain are in good agreement with the measured curves.
ABSTRACT
In the process of green and smart mine construction under the context of carbon neutrality, China's coal safety situation has been continuously improved in recent years. In order to recognize the development of coal production in China and prepare for future monitoring and prevention of safety incidents, this study mainly elaborated on the basic situation of coal resources and national mining accidents over the past five years (2017-2021), from four dimensions (accident level, type, region, and time), and then proposed the preventive measures based on accident statistical laws. The results show that the storage of coal resources has obvious geographic characteristics, mainly concentrated in the Midwest, with coal resources in Shanxi and Shaanxi accounting for about 49.4%. The proportion of coal consumption has dropped from 70.2% to 56% between 2011 and 2021, but still accounts for more than half of the all. Meanwhile, the accident-prone areas are positively correlated with the amount of coal production. Among different levels of coal mine accidents, general accidents had the highest number of accidents and deaths, with 692 accidents and 783 deaths, accounting for 87.6% and 54.64% respectively. The frequency of roof, gas, and transportation accidents is relatively high, and the number of single fatalities caused by gas accidents is the largest, about 4.18. In terms of geographical distribution of accidents, the safety situation in Shanxi Province is the most severe. From the time distribution of coal mine accidents, the accidents mainly occurred in July and August, and rarely occurred in February and December. Finally, the "4 + 4" safety management model is proposed, combining the statistical results with coal production in China. Based on the existing health and safety management systems, the managements are divided into four sub-categories, and more specific measures are suggested.
ABSTRACT
To investigate the effect of water on the mechanical properties and acoustic emission (AE) characteristics of coal in the failure and deformation processes. Coal samples of different content were subjected to uniaxial compression tests and AE signals were monitored. The characteristics of the AE signals were further analyzed using fractal analysis. The results show that saturated coal samples have substantially reduced mechanical properties such as uniaxial compressive strength (UCS), dissipation energy, peak stress, and elastic modulus. Under loading, stress-strain curves are characterized by five distinct stages: (1) compaction; (2) linear elastic; (3) crack stable propagation; (4) crack accelerating propagation; and (5) post-peak and residual stages. Using phase-space theory, a novel Grassberger Procaccia (GP) algorithm was utilized to find the AE fractal characteristics of coal samples in different stages. It is significant to note that AE energy does not exhibit fractal characteristics in either the first or second stages. Contrary to the first two stages, the third stage showed obvious fractal characteristics. Fractal analysis of AE time sequences indicates that fractal dimension values change as stress increases, indicating the initiation of complex microcracks in coal. In the fourth stage, the fractal dimension rapidly declines as the strength reaches its limit, indicating the occurrence of macrocracks. However, fractal dimensions continued to decrease further or increased slightly in the fifth stage. Consequently, the coal begins to collapse, potentially resulting in a disaster and failure. It is, therefore, possible to accurately predict coal and rock dynamic failures and microcrack mechanisms by observing the subsequent sudden drop in the correlation dimension of the AE signals in response to different stages of loading.
ABSTRACT
The long-term stability of coal mine roadway engineering is critical to the safe mining of coal resources and the protection of the surface environment. In this paper, the creep test of coal samples in coal roadway was carried out by multi-stage constant load method, and the test results showed that when the stress level was low, the creep curve had a attenuated stage and a steady-state stage, and the steady-state creep rate tended to increase with the increase in the stress level; When the stress level was higher than the yield stress, the creep rate curve appeared to have an acceleration stage after the steady-state stage. The instability failure mode of the coal sample was mainly shear failure with local tension failure. For this, a New Fractional-order Nonlinear Viscoelastic-plastic Rheological Model (NFNVRM) was established by introducing Abel elements and Nonlinear elements, and the constitutive equation of the model was deduced. The new model can fully reflect the stable decay stage and accelerated rheological stages of coal samples, and the parameter identification curve was consistent with the experimental results, which verifies the correctness and reasonableness of the NFNVRM. Meanwhile, based on the FLAC3D secondary development interface, the constitutive equations of the NFNVRM were written into the software to obtain new Dynamic Link Library (DLL) files. The simulation results were consistent with the experimental results when the DLL file was called. Finally, the NFNVRM.dll was applied to predict the surrounding rock deformation of an S mine. The study's findings offer suggestions for environmental protection.
Subject(s)
Coal Mining , Coal , Mining , Engineering , Coal Mining/methodsABSTRACT
During the deformation and fracture process, the acoustic emission (AE) signals can be produced for the of coal, rock and other solid materials, which revealing the damage localization evolution process. The effect of gas adsorption and pressure can change mechanical properties of coal mass and affect its damage development. Based on this, the experimental system for gas-bearing coal loading and AE monitoring was constructed, to analyze AE response characteristics under the joint action of loading stress and gas pressure on coal specimen. Afterwards, the damage localization evolution process of coal mass was studied with the moment tensor inversion method. Results showed that temporal response of AE signals was closely related to the damage degree and loading level of coal specimen, which could reveal its local severe damage and final failure characteristics. The spatial distribution and spread trend of AE fracture events inside coal specimen could be calculated through the moment tensor inversion method. It was basically consistent with the results of crack expansion on the specimen surface. The zones, where fracture events occurred intensively, gathered and spread in a continuous trend, were conductive to forming the macrocrack belt macroscopically. It could be regarded as the hazard zone with dynamic failure occurrence. Moreover, when the coal specimen faced the critical failure, the precursor characteristics of AE response appeared with the shear fracture events dominated markedly. The study results provide a new research idea for revealing the damaging localization evolution process under the coupling effect of stress and gas and lay the application foundation.
ABSTRACT
Rockburst is a major disaster in deep mining, restricting the safety and the production efficiency of the Laohutai Coal Mine in Fushun, Liaoning Province. To predict and prevent coalmine rockbursts, a comprehensive method based on multi-instrument monitoring is proposed by using a YDD16 acoustic-electromagnetic monitor and microseismic monitoring system, including microseismic (MS) monitoring, electromagnetic radiation (EMR) monitoring, and acoustic emission (AE) monitoring. Field investigation shows that MS, AE, and EMR signals have abnormal precursors before rockbursts in a new working face. Based on the fluctuation theory and D-S evidence theory, the multi-index geophysical monitoring and early warning technology for rockburst disasters in the Laohutai Coal Mine are established. The method has been applied to the prediction of rockbursts in the Laohutai Coal Mine. The application shows that the acoustic-electromagnetic synchronous monitoring and early warning technology can accurately identify the potential rockburst risk and trigger an early warning, which is more reliable than a single method. The case study of the Laohutai rockburst shows that the joint early warning method of multi-instrument comprehensive monitoring can predict the possibility of rockbursts.
Subject(s)
Mining , Radiation Monitoring , Electromagnetic Radiation , Technology , CoalABSTRACT
Across the world, coal resource is widely utilized in industrial production. During coal mining activities, dynamic disasters may be induced, such as coal and gas outbursts, or rock burst, resulting in serious accidents or disasters. Previous studies have shown that electric potential (EP) signals can be produced during the deformation and fracture process of coal and rock mass under load. The abnormal response characteristics of EP can reveal the damage evolution and failure feather of coal mass. In this paper, the response characteristics of EP signals are analyzed with high gas testing during mining activities within deep coal seams, and the relationship between the EP response and outburst disaster hazard is studied. The results show that: (1) Under the comprehensive action of mining stress and gas effect, the coal mass was damaged and fractured, which can produce abundant EP signals, while the temporal EP response characteristics can reflect the loading state and damage evolution process inside the coal seam. (2) When coal cannon and a sudden increase of gas concentration occurred in the coal mass, the EP signal was at a high level and fluctuated violently. This can be regarded as precursory information for an outburst risk, which was verified by monitoring the results of mining stress and electromagnetic radiation (EMR). (3) Based on the unilateral inversion imaging method, EP spatial distribution law was studied and abnormal zones with high-value were identified. The zone is close to, or coincident with, the high value interval of EMR intensity and count indexes, which revealed the distribution characteristics of coal damage localization. Hence, EP monitoring results can forecast precursor information of outburst hazards temporally, and identify local zones with outburst hazard spatially. This study provides a new idea and application basis for using the EP method to monitor and prevent coal and rock dynamic disaster hazards in the field.
Subject(s)
Coal Mining , Disasters , Coal , Electricity , Electromagnetic RadiationABSTRACT
In-situ coal bio-gasification can be defined as one of the coal bio-mining methodology that fully utilizes the methanogenic bacteria in coal to review the current findings, namely anaerobic digestion of organic components. The following experiment has been done in regards, one vertical well and one multi-branch horizontal well were used as experiment wells and two vertical wells were used as control wells, the pilot test was carried out with single well nutrition injection method. By applying the above mentioned method, the concentration of Cl- ion and number altered in Methanogen spp. were used to trace nutrition diffusion. Furthermore, technical implementation results analysis has been made with the observation of CH4 production changes and coal bed biome evolution. Gas production rates in each well were monitored by using the FLLQ gas roots flow mete. The concentration of CH4 and CO2 were evaluated by using the Agilent 7890A gas chromatograph, on the other hand, concentrations of Cl- were determined by the application of ICS-1100 ion chromatography system. The F420 fluorescence method was adopted to test for the presence of methanogenic bacteria. In the interim of the completion stage, the study stated that the bacterial diversity of underground water of Z-7H well has a high pass sequence with the experimental period of 814 days. Gas production data in Z-159 and Z-7H wells showed the gasification of coal lasted 635 and 799 days, yielded 74817 m3 and 251754 m3 coalbed methane, respectively. Furthermore, experimental data presented that one time nutrition injection in anthracite coalbed methane wells achieved an average of 717 days of continuous gas production among all experimental wells. The above fore-said study dedicated the significance of native bacterial fermentation, as it proven the fact that anthracite can be applied to accomplish coal bio-gasification and coalbed methane production stimulation in-situ.
ABSTRACT
Background and purpose: The causes of the higher incidence of intracerebral hemorrhage (ICH) on a given day are unclear. Previous studies have shown that it may vary by region and population. The purpose of this study was to detect weekly variations in ICH occurrence in southwest China and to assess differences in ICH occurrence among different populations. Methods: This hospital-based study included patients with first-onset ICH that occurred from January 1, 2012, to December 31, 2019. The weekly variation in ICH occurrence was analyzed and stratified by sex, age, comorbidities, living habits, and residence. Results: A total of 5,038 patients with first-onset ICH were enrolled. ICH occurrence was higher on Monday [odds ratio (OR), 1.22; 95% CI, 1.09-1.36; P < 0.001] and Friday (OR, 1.15; 95% CI, 1.03-1.28; P < 0.001) among all patients, and this pattern was consistent with that of men, whereas women showed a higher incidence on Mondays, Saturdays, and Sundays. The increase in the number of ICH events on Monday and Friday was pronounced in the age range of 41-60 years; however, no significant weekly variation in ICH occurrence was observed among other age groups. After stratifying by comorbidities, a significant weekly variation in ICH occurrence was observed in patients with hypertension or diabetes. Smoking and alcohol consumption was associated with a higher incidence of ICH on Friday; otherwise, a Monday excess was observed. The urban population demonstrated a significant weekly variation in ICH occurrence, whereas the rural population did not. Conclusions: Intracerebral hemorrhage occurrence showed weekly variations in southwest China and was significantly affected by sex, age, comorbidities, living habits, and residence. This suggests that weekly variations in ICH occurrence maybe dependent on the region and population.
ABSTRACT
In the coal biogasification, butyric acid is an important intermediate product. The enrichment of butyric acid-producing bacteria in coal geological methanogens is critical to confirm this assertion. Therefore, to study a method for enrichment of butyric acid-producing bacteria and to explore characteristic factors for evaluating the enrichment effect would be the basis for further strain isolation and metabolomics research. In this study, the nutrition control method was used for the butyric acid-producing bacteria enrichment from concentrated bacteria solution in Sihe coal seam. The characteristic factors' changes in gas production, gas composition, butyric acid concentration, and pH were observed and analyzed in the experiment. High-throughput sequencing was used as a verification method to validate the medium and genera enrichment effect that can be used for the butyric acid-producing bacteria. Through experimental research and analysis, it was identified that the glucose-sucrose-maltose medium was the beneficial medium to the enrichment of butyric acid-producing bacteria, and the high-throughput sequencing determined that the enriched genera were Clostridium spp. Glucose-sucrose-maltose medium experimental data confirmed that the decrease of CO2 and H2 daily yield, the increase of butyric acid concentration, and the decrease of pH value had a significant positive correlation with the enrichment of Clostridium spp.
Subject(s)
Biotechnology , Clostridium/drug effects , Clostridium/metabolism , Coal/analysis , Nutrients/pharmacology , Butyric Acid/metabolism , Carbon Dioxide/metabolism , Culture Media/chemistry , Dose-Response Relationship, Drug , Hydrogen/metabolism , Hydrogen-Ion Concentration , MetabolomicsABSTRACT
High temperature causes thermal damage to rock; the macrofracture and microfracture of rock can be produced under the action of temperature treatment. Under the influence of high temperature, the surrounding rock of deep underground engineering will suffer instability damage and cause serious harm to the people. In order to use the electromagnetic radiation (EMR) technology (a non-contact geophysical method) for evaluating the thermal stability of rock in underground thermal engineering applications, we established the EMR testing experimental system of rock under the action of a continuous heat source. The variation of EMR signals of rock under different temperatures was tested, and the EMR signals generates during the process of rock thermal deformation and thermal fracture, which were later analyzed. Under the action of a continuous heat source, the rock materials produced EMR signals with three kinds of frequencies. With the increase of rock temperature, the variation trends of EMR signals varied from the slow growth rate to the rapid growth rate, EMR signals can be divided into five stages. The increase of EMR signals is positively correlated with temperature, the Hurst exponent was higher than 0.7. The thermal stress was responsible for thermal deformation and fracture, thus generating the EMR signals. The research results have important guiding significance for the application of EMR technology to the evaluation of rock thermal stability.
Subject(s)
Electromagnetic Radiation , Geology/methods , China , Hot TemperatureABSTRACT
Microbially enhanced coalbed methane technology must be used to increase the methane content in mining and generate secondary biogenic gas. In this technology, the metabolic processes of methanogenic consortia are the basis for the production of biomethane from some of the organic compounds in coal. Thus, culture nutrition plays an important role in remediating the nutritional deficiency of a coal seam. To enhance the methane production rates for microorganism consortia, different types of nutrition solutions were examined in this study. Emulsion nutrition solutions containing a novel nutritional supplement, called dystrophy optional modification latex, increased the methane yield for methanogenic consortia. This new nutritional supplement can help methanogenic consortia form an enhanced anaerobic environment, optimize the microbial balance in the consortia, and improve the methane biosynthesis rate.