Controlling the helicity of light by electrical magnetization switching.

Controlling the intensity of emitted light and charge current is the basis of transferring and processing information1. By contrast, robust information storage and magnetic random-access memories are implemented using the spin of the carrier and the associated magnetization in ferromagnets2. The missing link between the respective disciplines of photonics, electronics and spintronics is to modulate the circular polarization of the emitted light, rather than its intensity, by electrically controlled magnetization. Here we demonstrate that this missing link is established at room temperature and zero applied magnetic field in light-emitting diodes2-7, through the transfer of angular momentum between photons, electrons and ferromagnets. With spin-orbit torque8-11, a charge current generates also a spin current to electrically switch the magnetization. This switching determines the spin orientation of injected carriers into semiconductors, in which the transfer of angular momentum from the electron spin to photon controls the circular polarization of the emitted light2. The spin-photon conversion with the nonvolatile control of magnetization opens paths to seamlessly integrate information transfer, processing and storage. Our results provide substantial advances towards electrically controlled ultrafast modulation of circular polarization and spin injection with magnetization dynamics for the next-generation information and communication technology12, including space-light data transfer. The same operating principle in scaled-down structures or using two-dimensional materials will enable transformative opportunities for quantum information processing with spin-controlled single-photon sources, as well as for implementing spin-dependent time-resolved spectroscopies.

A LaCl3-based lithium superionic conductor compatible with lithium metal.

Inorganic superionic conductors possess high ionic conductivity and excellent thermal stability but their poor interfacial compatibility with lithium metal electrodes precludes application in all-solid-state lithium metal batteries1,2. Here we report a LaCl3-based lithium superionic conductor possessing excellent interfacial compatibility with lithium metal electrodes. In contrast to a Li3MCl6 (M = Y, In, Sc and Ho) electrolyte lattice3-6, the UCl3-type LaCl3 lattice has large, one-dimensional channels for rapid Li+ conduction, interconnected by La vacancies via Ta doping and resulting in a three-dimensional Li+ migration network. The optimized Li0.388Ta0.238La0.475Cl3 electrolyte exhibits Li+ conductivity of 3.02 mS cm-1 at 30 °C and a low activation energy of 0.197 eV. It also generates a gradient interfacial passivation layer to stabilize the Li metal electrode for long-term cycling of a Li-Li symmetric cell (1 mAh cm-2) for more than 5,000 h. When directly coupled with an uncoated LiNi0.5Co0.2Mn0.3O2 cathode and bare Li metal anode, the Li0.388Ta0.238La0.475Cl3 electrolyte enables a solid battery to run for more than 100 cycles with a cutoff voltage of 4.35 V and areal capacity of more than 1 mAh cm-2. We also demonstrate rapid Li+ conduction in lanthanide metal chlorides (LnCl3; Ln = La, Ce, Nd, Sm and Gd), suggesting that the LnCl3 solid electrolyte system could provide further developments in conductivity and utility.

Magnetic Nanoparticles: A Review on Synthesis, Characterization, Functionalization, and Biomedical Applications.

Nowadays, magnetic nanoparticles (MNPs) are applied in numerous fields, especially in biomedical applications. Since biofluidic samples and biological tissues are nonmagnetic, negligible background signals can interfere with the magnetic signals from MNPs in magnetic biosensing and imaging applications. In addition, the MNPs can be remotely controlled by magnetic fields, which make it possible for magnetic separation and targeted drug delivery. Furthermore, due to the unique dynamic magnetizations of MNPs when subjected to alternating magnetic fields, MNPs are also proposed as a key tool in cancer treatment, an example is magnetic hyperthermia therapy. Due to their distinct surface chemistry, good biocompatibility, and inducible magnetic moments, the material and morphological structure design of MNPs has attracted enormous interest from a variety of scientific domains. Herein, a thorough review of the chemical synthesis strategies of MNPs, the methodologies to modify the MNPs surface for better biocompatibility, the physicochemical characterization techniques for MNPs, as well as some representative applications of MNPs in disease diagnosis and treatment are provided. Further portions of the review go into the diagnostic and therapeutic uses of composite MNPs with core/shell structures as well as a deeper analysis of MNP properties to learn about potential biomedical applications.

Roadmap on magnetic nanoparticles in nanomedicine.

Magnetic nanoparticles (MNPs) represent a class of small particles typically with diameters ranging from 1 to 100 nanometers. These nanoparticles are composed of magnetic materials such as iron, cobalt, nickel, or their alloys. The nanoscale size of MNPs gives them unique physicochemical (physical and chemical) properties not found in their bulk counterparts. Their versatile nature and unique magnetic behavior make them valuable in a wide range of scientific, medical, and technological fields. Over the past decade, there has been a significant surge in MNP-based applications spanning biomedical uses, environmental remediation, data storage, energy storage, and catalysis. Given their magnetic nature and small size, MNPs can be manipulated and guided using external magnetic fields. This characteristic is harnessed in biomedical applications, where these nanoparticles can be directed to specific targets in the body for imaging, drug delivery, or hyperthermia treatment. Herein, this roadmap offers an overview of the current status, challenges, and advancements in various facets of MNPs. It covers magnetic properties, synthesis, functionalization, characterization, and biomedical applications such as sample enrichment, bioassays, imaging, hyperthermia, neuromodulation, tissue engineering, and drug/gene delivery. However, as MNPs are increasingly explored for in vivo applications, concerns have emerged regarding their cytotoxicity, cellular uptake, and degradation, prompting attention from both researchers and clinicians. This roadmap aims to provide a comprehensive perspective on the evolving landscape of MNP research.

A unified evaluation descriptor for π-bridges applied to metalloporphyrin derivatives.

Establishing the structure of porphyrins with a A-π-D-π-A configuration is one of the effective strategies to maintain their dominance and compensate shortcomings through flexible changes in fragments. In this regard, π-bridges have attracted wide attention as a parameter affecting molecular backbones, electron transfer, energy levels, absorption, and other properties. However, the essence and influence of π-bridges have not yet been confirmed. In order to satisfy the requirements of intelligent application in molecular design, this study aimed to investigate the control effect of differences in π-bridge composition (thiophene and selenophene) and connection type (single bonds, ethylenic bonds and fused) on photoelectric performance. Y6 and PC61BM were used as acceptors to build donor/acceptor (D/A) interfaces and characterize the film morphology in three dimensions. Results showed that the essence of π-bridges involves a strong bridging effect (adjusting ability) between A and D fragments rather than highlighting its own nature. The large value could obtain high open circuit voltages (VOC), large separation and small recombination rates as well as stable and tight morphology. Therefore, adjusting ability is a unified descriptor for evaluating π-bridges, and it is an effective strategy to adjust material properties and morphology. This insight and discovery may provide a new evaluation descriptor for the screening and design of π-bridges.

Structural Anisotropy-Driven Atomic Mechanisms of Phase Transformations in the Pt-Sn System.

Using in situ atomic-resolution scanning transmission electron microscopy, atomic movements and rearrangements associated with diffusive solid to solid phase transformations in the Pt-Sn system are captured to reveal details of the underlying atomistic mechanisms that drive these transformations. In the PtSn4 to PtSn2 phase transformation, a periodic superlattice substructure and a unique intermediate structure precede the nucleation and growth of the PtSn2 phase. At the atomic level, all stages of the transformation are templated by the anisotropic crystal structure of the parent PtSn4 phase. In the case of the PtSn2 to Pt2Sn3 transformation, the anisotropy in the structure of product Pt2Sn3 dictates the path of transformation. Analysis of atomic configurations at the transformation front elucidates the diffusion pathways and lattice distortions required for these phase transformations. Comparison of multiple Pt-Sn phase transformations reveals the structural parameters governing solid to solid phase transformations in this technologically interesting intermetallic system.

Sputtered L10-FePd and its Synthetic Antiferromagnet on Si/SiO2 Wafers for Scalable Spintronics.

As a promising alternative to the mainstream CoFeB/MgO system with interfacial perpendicular magnetic anisotropy (PMA), L10-FePd and its synthetic antiferromagnet (SAF) structure with large crystalline PMA can support spintronic devices with sufficient thermal stability at sub-5 nm sizes. However, the compatibility requirement of preparing L10-FePd thin films on Si/SiO2 wafers is still unmet. In this paper, we prepare high-quality L10-FePd and its SAF on Si/SiO2 wafers by coating the amorphous SiO2 surface with an MgO(001) seed layer. The prepared L10-FePd single layer and SAF stack are highly (001)-textured, showing strong PMA, low damping, and sizeable interlayer exchange coupling, respectively. Systematic characterizations, including advanced X-ray diffraction measurement and atomic resolution-scanning transmission electron microscopy, are conducted to explain the outstanding performance of L10-FePd layers. A fully-epitaxial growth that starts from MgO seed layer, induces the (001) texture of L10-FePd, and extends through the SAF spacer is observed. This study makes the vision of scalable spintronics more practical.

Revealing Site Occupancy in a Complex Oxide: Terbium Iron Garnet.

Complex oxide films stabilized by epitaxial growth can exhibit large populations of point defects which have important effects on their properties. The site occupancy of pulsed laser-deposited epitaxial terbium iron garnet (TbIG) films with excess terbium (Tb) is analyzed, in which the terbium:iron (Tb:Fe)ratio is 0.86 compared to the stoichiometric value of 0.6. The magnetic properties of the TbIG are sensitive to site occupancy, exhibiting a higher compensation temperature (by 90 K) and a lower Curie temperature (by 40 K) than the bulk Tb3 Fe5 O12 garnet. Data derived from X-ray core-level spectroscopy, magnetometry, and molecular field coefficient modeling are consistent with occupancy of the dodecahedral sites by Tb3+ , the octahedral sites by Fe3+ , Tb3+ and vacancies, and the tetrahedral sites by Fe3+ and vacancies. Energy dispersive X-ray spectroscopy in a scanning transmission electron microscope provides direct evidence of TbFe antisites. A small fraction of Fe2+ is present, and oxygen vacancies are inferred to be present to maintain charge neutrality. Variation of the site occupancies provides a path to considerable manipulation of the magnetic properties of epitaxial iron garnet films and other complex oxides, which readily accommodate stoichiometries not found in their bulk counterparts.

Magnetic Particle Spectroscopy for Point-of-Care: A Review on Recent Advances.

Since its first report in 2006, magnetic particle spectroscopy (MPS)-based biosensors have flourished over the past decade. Currently, MPS are used for a wide range of applications, such as disease diagnosis, foodborne pathogen detection, etc. In this work, different MPS platforms, such as dual-frequency and mono-frequency driving field designs, were reviewed. MPS combined with multi-functional magnetic nanoparticles (MNPs) have been extensively reported as a versatile platform for the detection of a long list of biomarkers. The surface-functionalized MNPs serve as nanoprobes that specifically bind and label target analytes from liquid samples. Herein, an analysis of the theories and mechanisms that underlie different MPS platforms, which enable the implementation of bioassays based on either volume or surface, was carried out. Furthermore, this review draws attention to some significant MPS platform applications in the biomedical and biological fields. In recent years, different kinds of MPS point-of-care (POC) devices have been reported independently by several groups in the world. Due to the high detection sensitivity, simple assay procedures and low cost per run, the MPS POC devices are expected to become more widespread in the future. In addition, the growth of telemedicine and remote monitoring has created a greater demand for POC devices, as patients are able to receive health assessments and obtain results from the comfort of their own homes. At the end of this review, we comment on the opportunities and challenges for POC devices as well as MPS devices regarding the intensely growing demand for rapid, affordable, high-sensitivity and user-friendly devices.

Bipolar Electric-Field Switching of Perpendicular Magnetic Tunnel Junctions through Voltage-Controlled Exchange Coupling.

Perpendicular magnetic tunnel junctions (p-MTJs) switched utilizing bipolar electric fields have extensive applications in energy-efficient memory and logic devices. Voltage-controlled magnetic anisotropy linearly lowers the energy barrier of the ferromagnetic layer via the electric field effect and efficiently switches p-MTJs only with a unipolar behavior. Here, we demonstrate a bipolar electric field effect switching of 100 nm p-MTJs with a synthetic antiferromagnetic free layer through voltage-controlled exchange coupling (VCEC). The switching current density, ∼1.1 × 105 A/cm2, is 1 order of magnitude lower than that of the best-reported spin-transfer torque devices. Theoretical results suggest that the electric field induces a ferromagnetic-antiferromagnetic exchange coupling transition of the synthetic antiferromagnetic free layer and generates a fieldlike interlayer exchange coupling torque, which causes the bidirectional magnetization switching of p-MTJs. These results could eliminate the major obstacle in the development of spin memory devices beyond their embedded applications.

Determination of 35 sulfonamides in pork by magnetic molecularly imprinted polymer-based dispersive solid-phase extraction and ultra-performance liquid chromatography photodiode array method.

BACKGROUND: Sulfonamide residues in foods of animal origin are potential risks to consumer health, so it is very important to inspect them. Among the previously reported instrumental methods, the best method can only be used to determine at most 22 sulfonamides. Thus, an instrumental method capable of determining more sulfonamide species is desirable. RESULTS: In this study, sulfadoxine was used as a template to synthesize a type of magnetic molecularly imprinted polymer that could recognize 35 sulfonamides. After characterization, this composite was used to develop a dispersive solid-phase extraction method for extraction and purification of the 35 sulfonamides in pork, followed by determination using an ultra-performance liquid chromatography photodiode array method. This composite exhibited high adsorption capacity (11.01-19.21 µg mg-1 ) and high recovery (>89.01%), and could be reused at least ten times. Due to the enrichment effect during sample preparation (enrichment factor 22-66), the limits of detection for determination of the 35 drugs in pork were in the range of 0.08-0.53 ng g-1 . The detection results for some real pork samples were consistent with a liquid chromatographic-tandem mass spectrometric method. After comparison, the present method showed generally better performances than the previously reported sample preparation methods and instrumental methods for detection of sulfonamides. CONCLUSION: The method developed in the present study could be used as a practical tool for routine detection of sulfonamide residues in pork samples. © 2022 Society of Chemical Industry.

[Effect of Sparganii Rhizoma-Curcumae Rhizoma-medicated serum on proliferation, apoptosis, and migration of human ectopic endometrial stromal cells: based on JAK2/STAT3 signaling pathway].

Based on the Janus kinase 2/signal transducer and activator of transcription 3(JAK2/STAT3) signaling pathway, this study investigated the effect of medicated serum of Sparganii Rhizoma(SR) and Curcumae Rhizoma(CR) on the proliferation, apoptosis, migration, and secretion of inflammatory factors of ectopic endometrial stromal cells(ESCs). Specifically, human ESCs were primary-cultured. The effect of different concentration(5%, 10%, 20%) of SR-, CR-, and SR-CR combination-medicated serum, and AG490 solution(50 µmol·L~(-1)) on the proliferation of ESCs was detected by methyl thiazolyl tetrazolium(MTT) assay, and the optimal dose was selected accordingly for further experiment. The cells were classified into normal serum(NS) group, SR group(10%), CR group(10%), combination(CM) group(10%), and AG490 group. The apoptosis level of ESCs was detected by flow cytometry, and the migration ability was examined by wound healing assay. The secretion of interleukin(IL)-1ß, IL-6, and tumor necrosis factor(TNF)-α was determined by enzyme-linked immunosorbent assay(ELISA). The protein levels of cysteinyl aspartate specific protei-nase-3(caspase-3), B-cell lymphoma(Bcl-2), and Bcl-2-associated X protein(Bax) and the levels of phosphorylated(p)-JAK2 and p-STAT3 were detected by Western blot. The results showed that the viability of ESCs cells was lowered in the administration groups compared with the blank serum group(P<0.01), especially the 10% drug-medicated serum, which was selected for further experiment. The 10% SR-medicated serum, 10% CR-medicated serum, and 10% CM-medicated serum could increase the apoptosis rate(P<0.01), up-regulate the protein expression of caspase-3 and Bax in cells(P<0.05 or P<0.01), down-regulate the expression of Bcl-2(P<0.01), decrease the cell migration rate(P<0.05 or P<0.01), and reduce the secretion levels of IL-1ß, IL-6, and TNF-α(P<0.05 or P<0.01), and levels of p-JAK2 and p-STAT3(P<0.05 or P<0.01). Compared with the SR and CR groups, CM group showed low cell viability(P<0.01), high protein expression of caspase-3 and Bax(P<0.05 or P<0.01), and low protein expression of Bcl-2 and p-JAK2(P<0.05). After incubation with CM, the apoptosis rate was higher(P<0.05) and the migration rate was lower(P<0.01) than that of the CR group. The p-STAT3 protein level of CM group was lower than that of the RS group(P<0.05). The mechanism of SR, CR, and the combination underlying the improvement of endometriosis may be that they blocked JAK2/STAT3 signaling pathway, inhibited ESC proliferation, promoted apoptosis, weakened cell migration, and reduced the secretion of inflammatory factors. The effect of the combination was better than that of RS alone and CR alone.

A review on magnetic and spintronic neurostimulation: challenges and prospects.

In the treatment of neurodegenerative, sensory and cardiovascular diseases, electrical probes and arrays have shown quite a promising success rate. However, despite the outstanding clinical outcomes, their operation is significantly hindered by non-selective control of electric fields. A promising alternative is micromagnetic stimulation (µMS) due to the high permeability of magnetic field through biological tissues. The induced electric field from the time-varying magnetic field generated by magnetic neurostimulators is used to remotely stimulate neighboring neurons. Due to the spatial asymmetry of the induced electric field, high spatial selectivity of neurostimulation has been realized. Herein, some popular choices of magnetic neurostimulators such as microcoils (µcoils) and spintronic nanodevices are reviewed. The neurostimulator features such as power consumption and resolution (aiming at cellular level) are discussed. In addition, the chronic stability and biocompatibility of these implantable neurostimulator are commented in favor of further translation to clinical settings. Furthermore, magnetic nanoparticles (MNPs), as another invaluable neurostimulation material, has emerged in recent years. Thus, in this review we have also included MNPs as a remote neurostimulation solution that overcomes physical limitations of invasive implants. Overall, this review provides peers with the recent development of ultra-low power, cellular-level, spatially selective magnetic neurostimulators of dimensions within micro- to nano-range for treating chronic neurological disorders. At the end of this review, some potential applications of next generation neuro-devices have also been discussed.

Giant Magnetoresistance Biosensors for Food Safety Applications.

Nowadays, the increasing number of foodborne disease outbreaks around the globe has aroused the wide attention of the food industry and regulators. During food production, processing, storage, and transportation, microorganisms may grow and secrete toxins as well as other harmful substances. These kinds of food contamination from microbiological and chemical sources can seriously endanger human health. The traditional detection methods such as cell culture and colony counting cannot meet the requirements of rapid detection due to some intrinsic shortcomings, such as being time-consuming, laborious, and requiring expensive instrumentation or a central laboratory. In the past decade, efforts have been made to develop rapid, sensitive, and easy-to-use detection platforms for on-site food safety regulation. Herein, we review one type of promising biosensing platform that may revolutionize the current food surveillance approaches, the giant magnetoresistance (GMR) biosensors. Benefiting from the advances of nanotechnology, hundreds to thousands of GMR biosensors can be integrated into a fingernail-sized area, allowing the higher throughput screening of food samples at a lower cost. In addition, combined with on-chip microfluidic channels and filtration function, this type of GMR biosensing system can be fully automatic, and less operator training is required. Furthermore, the compact-sized GMR biosensor platforms could be further extended to related food contamination and the field screening of other pathogen targets.

A new pair of cytotoxic enantiomeric isoprenylated chromone derivatives from Pestalotiopsis sp.

A new pair of enantiomeric isoprenylated chromone derivatives, (±)-pestaloficiol X [(±)-1], along with a known compound pestaloficiol J (2), were isolated from the plant endophytic fungus Pestalotiopsis sp. The racemic mixture 1 was separated through chiral HPLC. The structures of new compounds (±)-1 were elucidated on the basis of extensive spectroscopic data and their absolute configurations were further configured through computational analysis of their electronic circular dichroism (ECD) spectra. Compound (+)-1 showed significant inhibitory potency against HL-60 and HEP-3B cell lines, with IC50 values of 1.35 ± 0.15 and 3.70 ± 0.33 µM, respectively, while compound (-)-1 showed significant inhibitory potency against HL-60 and HEP-3B cell lines, with IC50 values of 2.39 ± 0.26 and 2.99 ± 0.35 µM, respectively.

Giant Anomalous Hall Effect due to Double-Degenerate Quasiflat Bands.

We propose a novel approach to achieve a giant anomalous Hall effect (AHE) in materials with flat bands (FBs). FBs are accompanied by small electronic bandwidths, which consequently increases the momentum separation (K) within pair of Weyl points and, thus, the integrated Berry curvature. Starting from a simple model with a single pair of Weyl nodes, we demonstrated the increase of K and the AHE by decreasing the bandwidth. It is further expanded to a realistic pyrochlore lattice model with characteristic double-degenerated FBs, where we discovered a giant AHE while maximizing the K with nearly vanishing band dispersion of FBs. We identify that such a model system can be realized and modulated through strain engineering in both pyrochlore and spinel compounds based on first-principles calculations, validating our theoretical model and providing a feasible platform for experimental exploration.

The mechanism of the selective binding ability between opiate metabolites and acyclic cucurbit[4]uril: an MD/DFT study.

Subtle changes in molecular structure often lead to significant differences in host-guest interactions, which result in different host-guest recognition capabilities and dynamics behaviours in complex formation. Herein, we reveal the influence of the guest substituents on host-guest molecular recognition by molecular dynamics (MD) simulation and density functional theory (DFT) approaches. The results suggest that the binding energy barrier of acyclic cucurbit[4]uril (ACB[4]) with opiate metabolites gradually decreases. The methyl group in morphine (MOR) and morphine-3-glucuronide (M3G) strengthens the hydrophobicity of the guest, while depressing the energy loss of the desolvation of polar groups (e.g. hydroxyl) inside the ACB[4] cavity. However, in M3G, the 3-glucuronide group located outside the ACB[4] host cavity effectively alleviates the unfavourable desolvation effect of the hydroxyl and increases the binding constant by two orders of magnitude (compared with normorphine (NMOR)). Our findings stressed the essentiality of the binding mode and intermolecular noncovalent interactions in the host-guest selective binding ability.

A data process of human knee joint kinematics obtained by motion-capture measurement.

BACKGROUND: The motion capture has been used as the usual method for measuring movement parameters of human, and most of the measuring data are obtained by partial manual process based on commercial software. An automatic kinematics data process was developed by programming on MATLAB software in this paper. METHODS: The motion capture measurement of healthy volunteers was carried out and the MATLAB program was used for data process. Firstly, the coordinate data of markers and anatomical points on human lower limb measured by motion capture system were read and repaired through the usual and the patch program. Meantime, the local coordinate systems of human femur and tibia were established with anatomical points. Then flexion/extension, abduction/adduction and internal/external rotation of human knee tibiofemoral joint were obtained by special coordinate transformation program. RESULTS: Using the above methods, motion capture measurements and batch data processing were carried out on squatting and climbing stairs of 29 healthy volunteers. And the motion characteristics (flexion/extension, internal/external rotation and adduction/abduction) of the knee joint were obtained. For example, the maximum internal/external rotation in squatting and climbing stairs were respectively was 30.5 degrees and 14 degrees, etc. Meantime, the results of this paper also were respectively compared with the results processed by other research methods, and the results were basically consistent, thus the reliability of our research method was verified. After calibration processing, the compiled MATLAB program of this paper can directly be used for efficient batch processing and avoiding manual modeling one by one. CONCLUSION: A novel Patch Program of this paper has been developed, which can make reasonable compensation for missing and noise signals to obtain more complete motion data. At the same time, a universal data processing program has also been developed for obtaining the relative movement of various components of the human body, and the program can be modified for detail special analysis. These motion capture technologies can be used to judge whether the human body functions are abnormal, provide a reference for rehabilitation treatment and design of rehabilitation equipment, and evaluate the effectiveness before and after surgery.

Synthesis of molecularly imprinted microspheres and development of a fluorescence method for detection of chloramphenicol in meat.

In this study, nitrobenzene was used as dummy template to synthesize a type of specific molecularly imprinted microspheres for chloramphenicol, and 4-nitroaniline was coupled with three fluorophores to synthesize three fluorescent tracers. Then a competitive fluorescence method was developed on a conventional microplate for detection of chloramphenicol in chicken and pork samples. This method contained only one sample-loading step, so one assay was finished within 30 min. The IC50 was 1.8 ng/ml, and the limit of detection was 0.06 ng/g. The recoveries from chloramphenicol-fortified blank meat samples were in the range 67.5-96.2%. Furthermore, this method could be recycled three times. The detection results for some real meat samples were identical to that of a LC-MS/MS method. Therefore, this method could be used as a practical tool for routine screening for the residue of chloramphenicol in large number of meat samples.