Flexible and Recyclable Bio-Based Polyester Composite Films with Outstanding Mechanical and Gas Barrier Properties Using Leaf-Shaped CNT@BNNS Covalent Heterojunction.

With the depletion of petroleum resources, the development of sustainable alternatives for plastic substitutes has grown in importance. It is urgently desirable yet challenging to design high-performance polyesters with extensive mechanical and prominent gas barrier properties. This work uses bio-based PBF polyester as a matrix, "leaf-shaped" carbon nanotube@boron nitride nano-sheet (CNT@BNNS) covalent hetero-junctions as functional fillers, to fabricate CNT@BNNS/PBF (denoted as CBNP) composite films through an "in-situ polymerizing and hot-pressing" strategy. The covalent CNT "stem" suppresses the re-stacking of BNNS "leaf", endowing hetero-structured CNT@BNNS illustrates superior stress transfer and physical barrier effect. The covalently hetero structure and high orientation degree of CNT@BNNS greatly improve the comprehensive performance of the CBNP composites, including excellent mechanical (strength of 76 MPa, modulus of 2.3 GPa, toughness of 85 MJ m-3, elongation at break of 193%) and gas barrier (O2 of 0.015 barrer, and H2O of 1.1 × 10-14 g cm cm-2 s-1 Pa-1) properties that are much higher than for pure PBF or other-type polyesters, and most engineering plastics. Moreover, the CBNP composites also boast easy recyclability, overcoming the tradeoff between high performance and easy recycling of traditional plastics, which makes the polyester composite competitive as a plastic substitute.

Synthesis of Biobased Poly(butylene Furandicarboxylate) Containing Polysulfone with Excellent Thermal Resistance Properties.

A synthetic biopolymer derived from furandicarboxylic acid monomer and hydroxyethyl-terminated poly(ether sulfone) is presented. The synthesis involves 4,4'-dichlorodiphenyl sulfone and 4,4-dihydroxydiphenyl sulfone, resulting in poly(butylene furandicarboxylate)-poly(ether sulfone) copolyesters (PBFES) through melt polycondensation with titanium-catalyzed polymerization. This facile method yields segmented polyesters incorporating polysulfone, creating a versatile group of high-temperature thermoplastics with adjustable thermomechanical properties. The PBFES copolyesters demonstrate an impressive tensile modulus of 2830 MPa and a tensile strength of 84 MPa for PBFES55. Additionally, the poly(ether sulfone) unit imparts a relatively high glass transition temperature (Tg), ranging from 36.6 °C for poly(butylene 2,5-furandicarboxylate) to 112.3 °C for PBFES62. Moreover, the complete amorphous film of PBFES exhibits excellent transparency and solvent resistance, making it suitable for applications, such as food packaging materials.

High-Molecular-Weight and Light-Colored Disulfide-Bond-Embedded Polyesters: Accelerated Hydrolysis Triggered by Redox Responsiveness.

Disulfide bonds have attracted considerable attention due to their reduction responsiveness, but it is crucial and challenging to prepare disulfide-bond-based polyesters by melt polycondensation. Herein, the inherently poor thermal stability of the S-S bond in melting polycondensation was overcome. Moreover, poly(butylene succinate-co-dithiodipropionate) (PBSDi) with a light color and high molecular weights (Mn values up to 84.7 kg/mol) was obtained. These polyesters can be applied via melt processing with Td,5% > 318 °C. PBSDi10-PBSDi40 shows good crystallizability (crystallinity 56-38%) and compact lamellar thickness (2.9-3.2 nm). Compared with commercial poly(butylene adipate-co-terephthalate) (PBAT), the elevated mechanical and barrier performances of PBSDi make them better packaging materials. For the degradation behavior, the disulfide monomer obviously accelerates the enzyme degradation but has a weaker effect on hydrolysis. In 0.1 mol/L or higher concentrations of H2O2 solutions, the oxidation of disulfide bonds to sulfoxide and sulfone groups can be realized. This process results in a stronger nucleophilic attack, as confirmed by the Fukui function and DFT calculations. Additionally, the greater polarity and hydrophilicity of oxidation products, proved by noncovalent interaction analysis, accelerate the hydrolysis of polyesters. Moreover, glutathione-responsive breakage, from polymers to oligomers, is confirmed by an accelerated decline in molecular weight. Our research offers fresh perspectives on the effective synthesis of the disulfide polyester and lays a solid basis for the creation of high-performance biodegradable polyesters that degrade on demand.

Biobased Biodegradable Copolyesters from 2,5-Thiophenedicarboxylic Acid: Effect of Aliphatic Diols on Barrier Properties and Degradation.

The demand for sustainable development has led to increasing attention in biobased polyesters due to their adjustable thermal and mechanical properties and biodegradability. In this study, we used a novel bioderived aromatic diacid, 2,5-thiophenedicarboxylic acid (TDCA) to synthesize a list of novel aromatic-aliphatic poly(alkylene adipate-co-thiophenedicarboxylate) (PAATh) copolyesters through a facile melt polycondensation method. PAAThs are random copolyesters with weight-average molecular weights of 58400 to 84200 g·mol-1 and intrinsic viscosities of 0.80 to 1.27 dL·g-1. All PAAThs exhibit sufficiently high thermal stability as well as the highest tensile strength of 6.2 MPa and the best gas barrier performances against CO2 and O2, 4.3- and 3.3-fold better than those of poly(butylene adipate-co-terephthalate) (PBAT). The biodegradability of PAAThs was fully evaluated through a degradation experiment and various experimental parameters, including residue weights, surface morphology, and molecular compositions. The state-of-the-art molecular dynamics (MD) simulations were applied to elucidate the different enzymatic degradation behaviors of PAAThs due to the effect of diols with different chain structures. The sterically hindered carbonyl carbon of the PHATh-enzyme complex was more susceptible to nucleophilic attack and exhibited a higher tendency to enter a prereaction state. This study has introduced a group of novel biobased copolyesters with their structure-property relationships investigated thoroughly, and the effect of diol components on the enzymatic degradation was revealed by computational analysis. These findings may lay the foundation for the development of promising substitutes for commercial biodegradable polyesters and shed light on their complicated degradation mechanisms.

A Review on Regenerating Materials from Spent Lithium-Ion Batteries.

Recycling spent lithium-ion batteries (LIBs) have attracted increasing attention for their great significance in environmental protection and cyclic resources utilization. Numerous studies focus on developing technologies for the treatment of spent LIBs. Among them, the regeneration of functional materials from spent LIBs has received great attention due to its short process route and high value-added product. This paper briefly summarizes the current status of spent LIBs recycling and details the existing processes and technologies for preparing various materials from spent LIBs. In addition, the benefits of material preparation from spent LIBs, compared with metals recovery only, are analyzed from both environmental and economic aspects. Lastly, the existing challenges and suggestions for the regeneration process are proposed.

Downregulation of T7 RNA polymerase transcription enhances pET-based recombinant protein production in Escherichia coli BL21 (DE3) by suppressing autolysis.

Escherichia coli BL21 (DE3) is an excellent and widely used host for recombinant protein production. Many variant hosts were developed from BL21 (DE3), but improving the expression of specific proteins remains a major challenge in biotechnology. In this study, we found that when BL21 (DE3) overexpressed glucose dehydrogenase (GDH), a significant industrial enzyme, severe cell autolysis was induced. Subsequently, we observed this phenomenon in the expression of 10 other recombinant proteins. This precludes a further increase of the produced enzyme activity by extending the fermentation time, which is not conducive to the reduction of industrial enzyme production costs. Analysis of membrane structure and messenger RNA expression analysis showed that cells could underwent a form of programmed cell death (PCD) during the autolysis period. However, blocking three known PCD pathways in BL21 (DE3) did not completely alleviate autolysis completely. Consequently, we attempted to develop a strong expression host resistant to autolysis by controlling the speed of recombinant protein expression. To find a more suitable protein expression rate, the high- and low-strength promoter lacUV5 and lac were shuffled and recombined to yield the promoter variants lacUV5-1A and lac-1G. The results showed that only one base in lac promoter needs to be changed, and the A at the +1 position was changed to a G, resulting in the improved host BL21 (DE3-lac1G), which resistant to autolysis. As a consequence, the GDH activity at 43 h was greatly increased from 37.5 to 452.0 U/ml. In scale-up fermentation, the new host was able to produce the model enzyme with a high rate of 89.55 U/ml/h at 43 h, compared to only 3 U/ml/h achieved using BL21 (DE3). Importantly, BL21 (DE3-lac1G) also successfully improved the production of 10 other enzymes. The engineered E. coli strain constructed in this study conveniently optimizes recombinant protein overexpression by suppressing cell autolysis, and shows great potential for industrial applications.

Ultraflexible Transparent Bio-Based Polymer Conductive Films Based on Ag Nanowires.

The unstable mechanical properties of flexible transparent conductive films (TCFs) make it difficult for them to meet the requirements for displays or wearable devices. Here, the relationship between the mechanism behind the bending behavior and the electrical properties, which is important for improving the mechanical stability of flexible TCFs, is explored. Flexible TCFs are reported based on silver nanowires (AgNWs) and bio-based poly(ethylene-co-1,4-cyclohexanedimethylene 2,5-furandicarboxylate)s (PECFs), with a low sheet resistance (23.8 Ω sq-1 at 84.6% transmittance) and superior mechanical properties. The electrical properties of the AgNW/PECFs composite film show almost no change after bending for 2000 times.

Psychometric Properties of Fine Motor Function Measure in Children With Cerebral Palsy: A Rasch Analysis.

Our study utilized Rasch Analysis to examine the psychometric properties of 61-items fine motor function measure (FMFM) in children with cerebral palsy (CP). Partial credit model (PCM) was utilized to test the reliability and validity of FMFM. The response pattern of this samples displayed acceptable fitness to PCM. The analysis results supported the assumption of 1-dimensionality of FMFM. Disordered category thresholds were found in 30 items. Differential item functioning (DIF) was detected in 23 items. Participants with different CP subtypes in different age groups may perform in differently responses patterns. The Rasch analysis produces reliable evidence to support the clinical application of FMFM. Some items may produce inaccurate measurements originated from category structures. Difference in age groups and symptom topography may be associated with variation in fine motor ability among children with CP and leading to unnecessary assessment bias. Hence, FMFM items need modifications to calibrate the former item formulation.

Co@NC Chainmail Nanowires for Thermo- and Electrocatalytic Oxidation of 2,5-Bis(hydroxymethyl)furan to 2,5-Furandicarboxylic Acid.

2,5-Furandicarboxylic acid (FDCA) has emerged as an important bio-based furanic compound, which has broad application prospects in renewable energy and materials, especially in the preparation of polyethylene 2,5-furandicarboxylate (PEF). While the  conventional synthesis of FDCA involves oxidation of 5-hydroxymethylfurfural (HMF) as a substitute, the thermal and chemical instability of HMF due to its aldehyde group poses challenges. A more favorable alternative is the utilization of 2,5-bis(hydroxymethyl)furan (BHMF), a non-aldehyde and more stable precursor. This study pioneeringly reports nitrogen-doped-carbon encapsulated cobalt (Co@NC) chainmail nanowires for the thermal and electrocatalytic oxidation of BHMF to FDCA. The Co@NC/NF achieved a 97.9% conversion of BHMF with a 93.3% yield of FDCA  at 1.475 V vs. RHE, whereas thermal catalysis only obtained 14.9% FDCA yield after 10 hours. Kinetic studies indicated that the large electrochemically active surface area and excellent kinetic parameters contribute its superior electrochemical performance. Mechanistic analysis revealed that the migration of inner electrons to the exterior modified the electronic properties of the carbon layer, thereby facilitating the oxidation of BHMF. Furthermore, the in-situ generation of high-valent cobalt species markedly accelerated the BHMF oxidation. This research underscores the potential of carbon-encapsulated metal chainmail catalysts in thermal and electrochemical biomass conversion.

Metal-polyphenol networks-modified tantalum plate for craniomaxillofacial reconstruction.

Using three-dimensional (3D) printing technology to make the porous tantalum plate and modify its surface. The physicochemical properties, cytocompatibility, antioxidant capacity, and histocompatibility of the modified materials were evaluated to prepare for the repair of craniomaxillofacial bone defects. The porous tantalum plates were 3D printed by selective laser melting technology. Tantalum plates were surface modified with a metal polyphenol network. The surface-modified plates were analyzed for cytocompatibility using thiazolyl blue tetrazolium bromide and live/dead cell staining. The antioxidant capacity of the surface-modified plates was assessed by measuring the levels of intracellular reactive oxygen species, reduced glutathione, superoxide dismutase, and malondialdehyde. The histocompatibility of the plates was evaluated by animal experiments. The results obtained that the tantalum plates with uniform small pores exhibited a high mechanical strength. The surface-modified plates had much better hydrophilicity. In vitro cell experiments showed that the surface-modified plates had higher cytocompatibility and antioxidant capacity than blank tantalum plates. Through subcutaneous implantation in rabbits, the surface-modified plates demonstrated good histocompatibility. Hence, surface-modified tantalum plates had the potential to be used as an implant material for the treatment of craniomaxillofacial bone defects.

Fully Bio-Based 2,5-Furandicarboxylic Acid Polyester toward Plastics with Mechanically Robust, Excellent Gas Barrier and Fast Degradation.

Aliphatic-aromatic copolyesters offer a promising solution to mitigate plastic pollution, but high content of aliphatic units (>40 %) often suffer from diminished comprehensive performances. Poly(butylene oxalate-co-furandicarboxylate) (PBOF) copolyesters were synthesized by precisely controlling the oxalic acid content from 10 % to 60 %. Compared with commercial PBAT, the barrier properties of PBOF for H2O and O2 increased by more than 6 and 26 times, respectively. The introduction of the oxalic acid units allowed the water contact angle to be reduced from 82.5° to 62.9°. Superior hydrophilicity gave PBOF an excellent degradation performance within a 35-day hydrolysis. Interestingly, PBO20F and PBO30F also displayed obvious decrease of molecular weight during hydrolysis, with elastic modulus >1 GPa and tensile strength between 35-54 MPa. PBOF achieved the highest hydrolysis rates among the reported PBF-based copolyesters. The hydrolytic mechanism was further explored based on Fukui function analysis and density functional theory (DFT) calculation. Noncovalent analysis indicated that the water molecules formed hydrogen bonding interaction with adjacent ester groups and thus improved the reactivity of carbonyl carbon. PBOF not only meet the requirements of the high-performance packaging market but can quickly degrade after the end of their usage cycles, providing a new choice for green and environmental protection.

Sustainable Janus lignin-based polyurethane biofoams with robust antibacterial activity and long-term biofilm resistance.

Conventional antibiotic therapies have been becoming less efficient due to increasingly, and sometimes fully, antibiotic-resistant bacterial strains, sometimes known as "superbacteria" or "superbugs." Thus, novel antibacterial materials to effectively inhibit or kill bacteria are crucial for humanity. As a broad-spectrum antimicrobial agent, silver nanoparticles (Ag NPs) have been the most widely commercialized of biomedical materials. However, long-term use of significant amounts of Ag NPs can be potentially harmful to human health through a condition known as argyria, in addition to being toxic to many environmental systems. It is, thus, highly necessary to reduce the amount of Ag NPs employed in medical treatments while also ensuring maintenance of antimicrobial properties, in addition to reducing the overall cost of treatment for humanitarian utilization. For this purpose, naturally sourced antimicrobial polylysine (PL) is used to partially replace Ag NPs within the materials composition. Accordingly, a series of PL, Ag NPs, and lignin-based polyurethane (LPU) composite biofoams (LPU-PL-Ag) were prepared. These proposed composite biofoams, containing at most only 2 % PL and 0.03 % Ag NPs, significantly inhibited the growth of both Gram-positive and Gram-negative bacteria within 1 h and caused irreversibly destructive bactericidal effects. Additionally, with a layer of polydimethylsiloxane (PDMS) on the surface, PDMS-LPU-PL(2 %)-Ag(0.03 %) can effectively prevent bacterial adhesion with a clearance rate of about 70 % for both bacterial biofilms within three days and a growth rate of more than 80 % for mouse fibroblasts NIH 3 T3. These lignin-based polyurethane biofoam dressings, with shorter antiseptic sterilization times and broad-spectrum antibacterial effects, are extremely advantageous for infected wound treatment and healing in clinical use.

Anti-Biofouling Polyzwitterion-Poly(amidoxime) Composite Hydrogel for Highly Enhanced Uranium Extraction from Seawater.

Amidoxime-functionalized hydrogels are one of most promising adsorbents for high-efficiency uranium (U) extraction from seawater, but bioadhesion on their surface seriously decreases their adsorption efficiency and largely shortens their service life. Herein, a semi-interpenetrating zwitterion-poly(amidoxime) (ZW-PAO) hydrogel was explored through introducing a PAO polymer into a poly [3-(dimethyl 4-vinylbenzyl amino) propyl sulfonate] (PDVBAP) polyzwitterionic (PZW) network via ultraviolet (UV) polymerization. Owing to the anti-polyelectrolyte effect of the PZW network, this ZW-PAO hydrogel can provide excellent super-hydrophilicity in seawater for high-efficiency U-adsorption from seawater. Furthermore, the ZW-PAO hydrogel had outstanding anti-biofouling performance for both highly enhanced U-adsorption and a relatively long working life in natural seawater. As a result, during only 25 days in seawater (without filtering bacteria), the U-uptake amount of this ZW-PAO hydrogel can reach 9.38 mg/g and its average rate can reach 0.375 mg/(g∙day), which is excellent among reported adsorbents. This work has explored a promising hydrogel for high-efficiency U-recovery from natural seawater and will inspire new strategy for U-adsorbing materials.

New modifications of PBAT by a small amount of oxalic acid: Fast crystallization and enhanced degradation in all natural environments.

Biodegradable plastics are often mistakenly thought to be capable of degrading in any environment, but their slow degradation rate in the natural environment is still unsatisfactory. We synthetized a novel series of poly(butylene oxalate-co-adipate-co-terephthalate) (PBOAT) with unchanged melting point (135 °C), high elastic modulus (140 - 219 MPa) and elongation at break (478 - 769%). Fast isothermal crystallization with a semi-crystallization time < 20 s was demonstrated by the PBOAT. In N2 and air atmospheres, the PBOAT maintained the Td,5% higher than 329 °C. They also had good thermal stability at melt processing temperature for more than 20 min. PBOAT exhibited faster hydrolysis and seawater degradation, even under natural soil burial without light, but still kept stable under low humidity conditions during the storage and the shelf-life. Moreover, the hydrolysis mechanisms were clarified based on Fukui function analysis and DFT calculation, indicating that the hydrolysis of PBOAT would be more straightforward. The mechanism of soil burial is also elucidated through detailed characterization of the structure changes. The PBOAT offered a fresh approach to the development of high-performing, naturally degradable materials.

Thermodynamic and thermo-economic analyses of a coupled heat-pump system for low-grade exhaust-air heat exchange in mines.

Combining mine exhaust waste heat with existing heat pump technology is a promising technical route to realise the efficient extraction and scientific use of low-grade waste heat resources in mines and to solve the problem of insufficient heat supply in remote mining areas. This study proposes a new type of mine-exhaust-air heat exchange coupled with heat-pump waste-heat-utilisation system based on deep enthalpy heat extraction. Using a mining area in Northwest China as a representative case, this study establishes a systematic exergy analytical model and a thermo-economic model. Through an in-depth analysis of the different evaporation temperatures and condensing temperatures, the system's energy efficiency ratio (COP) reaches its optimal performance, with the total exergy efficiency surpassing 90%. The minimum efficiency of the subsystem return air heat exchanger is 35%. The unit thermal costs of the mine exhaust air waste heat utilisation system and a conventional coal-fired boiler system are 0.1291 and 0.1573 million RMB/kW·h, respectively. This is a thermal economics cost saving of 21%. The studied system demonstrates great economic viability and the potential for energy saving throughout its life cycle.

High-compact MXene-based coatings by controllable interfacial structures.

Titanium carbide (Ti3C2Tx) MXenes have been regarded as important functional fillers of organic coatings for anticorrosion. Various MXene-based composite coatings have been fabricated and investigated via a material modification strategy, enhancing the corrosion protection performance. However, the anticorrosion reliabilities of MXene-based composite coatings were thwarted by their disordered interfaces. Significantly, few reports discuss the influence of interface structures on the protection performance for the coatings. In this work, we confirm the exceptional anticorrosion performance of ordered MXene/epoxy composite (OMC) coatings via a reasonable interface strategy. The ordered interfacial structure can synergistically enhance the coating compactness while maximizing the infiltration paths of aggressive species. The obtained OMC coating is compact and shows a high impedance of 6.84 × 109 Ohm cm2, a high coating resistance of 6.08 × 109 Ohm cm2, an extremely low porosity of 0.77% and an extremely low breakpoint frequency of 0.18 Hz, at a low filler content of 0.5 wt%. Besides, the concept of specific impedance (SZ) is proposed to attest the superiority of the OMC coating. Furthermore, the galvanic corrosion effects of MXenes in epoxy coatings are systematically explored and confirmed for the first time. The highly ordered structure eliminates the corrosion promotion activity of the conductive MXene, and thus, endows the superior anticorrosion stability for the coating. This work provides an inspiration for constructing outstanding long-term MXene-based anticorrosion coatings via regulating the coating interface.

Melt polycondensation of poly (butylene oxalate-co-succinate) with great potential in curbing marine plastic pollution.

Marine plastic pollution, with annual emissions into the marine over 53 million metric tons, has been a major worldwide concern. Many of so-called "biodegradable" polymers degrade very slowly in seawater. Oxalate have attracted attention because the electron-withdrawing effect of adjacent ester bonds promotes their natural hydrolysis, particularly in the ocean. However, the low boiling point and poor thermal stability of oxalic acids severely limits their applications. The successful synthesis of light-colored poly(butylene oxalate-co-succinate) (PBOS), with weight average molecular weight higher than 1 × 105 g/mol, displays the breakthroughs in the melt polycondensation of oxalic acid-based copolyesters. The copolymerization of oxalic acid retains the crystallization rate of PBS, with minimum half-crystallization times from 16 s (PBO10S) to 48 s (PBO30S). PBO10S-PBO40S exhibit good mechanical properties with elastic modulus of 218-454 MPa, and tensile strength between 12 and 29 MPa, better than packaging materials such as biodegradable PBAT and non-degradable LLDPE. PBOS achieve rapid degradation in the marine environment, with a mass loss 8%- 45% after 35 days. The characterization of structural changes demonstrate that the introduced oxalic acid plays a key role in the process of seawater degradation. This new class of polymers therefore provide highly promising materials for sustainable packaging with unique seawater degradation properties.

Case study on incentive mechanism of energy efficiency retrofit in coal-fueled power plant in China.

An ordinary steam turbine retrofit project is selected as a case study; through the retrofit, the project activities will generate emission reductions within the power grid for about 92,463 tCO(2)e per annum. The internal rate of return (IRR) of the project is only -0.41% without the revenue of carbon credits, for example, CERs, which is much lower than the benchmark value of 8%. Only when the unit price of carbon credit reaches 125 CNY/tCO(2), the IRR could reach the benchmark and an effective carbon tax needs to increase the price of carbon to 243 CNY/tce in order to make the project financially feasible. Design of incentive mechanism will help these low efficiency enterprises improve efficiency and reduce CO(2) emissions, which can provide the power plants sufficient incentive to implement energy efficiency retrofit project in existing coal-fuel power generation-units, and we hope it will make a good demonstration for the other low efficiency coal-fueled power generation units in China.

Kinetic study on degradation of micro-organics by different UV-based advanced oxidation processes in EfOM matrix.

Effluent organic matter (EfOM) contains a large number of substances that are harmful to both the environment and human health. To avoid the negative effects of organic matter in EfOM, advanced treatment of organic matter is an urgent task. Four typical oxidants (H2O2, PS, PMS, NaClO) and UV-combined treatments were used to treat micro-contaminants in the presence or absence of EfOM, because the active radical species produced in these UV-AOPs are highly reactive with organic contaminants. However, the removal efficiency of trace contaminants was greatly affected by the presence of EfOM. The degradation kinetics of two representative micro-contaminants (benzoic acid (BA) and para chlorobenzoic acid (pCBA)) was significantly reduced in the presence of EfOM, compared to the degradation kinetics in its absence. Using the method of competitive kinetics, with BA, pCBA, and 1,4-dimethoxybenzene (DMOB) as probes, the radicals (HO·, SO4-·, ClO·) proved to be the key to reaction species in advanced oxidation processes. UV irradiation on EfOM was not primarily responsible for the degradation of micro-contaminants. The second-order rate constants of the EfOM with radicals were determined to be (5.027 ± 0.643) × 102 (SO4-·), (3.192 ± 0.153) × 104 (HO·), and 1.35 × 106 (ClO·) (mg C/L)-1 s-1. In addition, this study evaluated the production of three radicals based on the concept of Rct, which can better analyze its reaction mechanism.

Recent Progress on Bio-Based Polyesters Derived from 2,5-Furandicarbonxylic Acid (FDCA).

The big challenge today is the upgrading of sustainable materials to replace miscellaneous ones from petroleum resources. Thus, a generic bio-based building block lays the foundation of the huge bio-market to green economy. 2,5-Furandicarboxylic acid (FDCA), a rigid diacid derived from lignocellulose or fructose, represents a great potential as a contender to terephthalic acid (TPA). Recently, studies on the synthesis, modification, and functionalization of bio-based polyesters based on FDCA have attracted widespread attention. To apply furanic polyesters on engineering plastics, packaging materials, electronics, etc., researchers have extended the properties of basic FDCA-based homo-polyesters by directional copolymerization and composite preparation. This review covers the synthesis and performance of polyesters and composites based on FDCA with emphasis bedded on the thermomechanical, crystallization, barrier properties, and biodegradability. Finally, a summary of what has been achieved and the issues waiting to be addressed of FDCA-based polyester materials are suggested.