A duct-to-mucosa pancreaticojejunostomy for small main pancreatic duct and soft pancreas in minimally invasive pancreaticoduodenectomy.

BACKGROUND: Postoperative pancreatic fistula (POPF) is often associated with significant morbidity and mortality after the Whipple operation. Patient-related factors associated with POPF include soft pancreatic texture and a small main pancreatic duct (MPD). The traditional duct-to-mucosa anastomosis was modified to be easily performed. The aim of the study was to evaluate the simplified pancreaticojejunostomy (PJ) method in the prevention of POPF after minimally invasive pancreaticoduodenectomy (PD). METHODS: Ninety-eight patients who underwent laparoscopic pancreaticoduodenectomy (LPD) and robotic pancreaticoduodenectomy (RPD) with a simplified PJ procedure containing only two duct-to-mucosa sutures and four penetrating-sutures to anastomose the pancreatic parenchyma and jejunal seromuscular layer in our center were retrospectively studied. Demographics and clinical short-term safety were assessed. RESULTS: All LPD and RPD procedures were successfully performed. The median time of PJ was 17 min, and the median blood loss was 60 mL, with only one patient requiring transfusion. Four patients (4.1%) suffered from clinically relevant POPF (CR-POPF), including four grade B cases and no grade C cases. For patients with an MPD diameter of 3 mm or less, POPF was noted in two (4%) of the fifty patients, with all cases being grade B. Of the patients with a soft pancreas, only two (4.5%) patients suffered from grade B POPF. One patient (1.0%) experienced a 90-day mortality. Neither the main pancreatic diameter nor pancreatic texture had an impact on postoperative outcomes. CONCLUSIONS: Our technique is a simple, safe and efficient alternative to prevent POPF after LPD and RPD. This method is suitable for almost all pancreatic conditions, including cases with a small main pancreatic duct and soft pancreas, and has the potential to become the preferred procedure in low-volume pancreatic surgery centers. Our modified duct-to-mucosa PJ, which contains only two duct-to-mucosa sutures and four penetrating-sutures to anastomose the pancreatic parenchyma and jejunal seromuscular layer, is ideal for small MPD and soft pancreas when performing minimally invasive PD and has a low rate of POPF. PJ pancreaticojejunostomy, MPD main pancreatic diameter, PD pancreaticoduodenectomy, POPF postoperative pancreatic fistula.

The property-governed activity of silver-modified titania photocatalysts: The influence of titania matrix.

Commercial titania photocatalysts were modified with silver nanoparticles (NPs) by the photodeposition method in the presence/absence of methanol. The obtained photocatalysts were characterized by XRD, XPS, diffuse reflectance spectroscopy, STEM, and time-resolved microwave conductivity (TRMC) methods. The photocatalytic activity was tested under UV/vis irradiation for (i) methanol dehydrogenation (during silver deposition), (ii) oxygen evolution with in situ silver deposition, and (iii) oxidative decomposition of acetic acid, as well as under vis irradiation for 2-propanol oxidation. The action spectra of 2-propanol oxidation were also performed. It has been confirmed that modification of titania with silver causes significant improvement of photocatalytic activity under both UV and vis irradiation as silver works as an electron scavenger (TRMC data) and vis activator (possibly by an energy transfer mechanism). The obtained activities differ between titania samples significantly, suggesting that the type of crystalline phase, particle/crystallite sizes, and electron traps' density are crucial for both the properties of formed silver deposits and resultant photocatalytic activity. It might be concluded that, under UV irradiation, (i) high crystallinity and large specific surface area are recommended for rutile- and anatase-rich samples, respectively, during hydrogen evolution, (ii) mixed crystalline phases cause a high rate of oxygen evolution from water, and (iii) anatase phase with fine silver NPs results in efficient decomposition of acetic acid, whereas under vis irradiation the aggregated silver NPs (broad localized surface plasmon resonance peak) on the rutile phase are promising for oxidation reactions.

Long noncoding RNA SPRY4-IT1 promotes proliferation and metastasis of hepatocellular carcinoma via mediating TNF signaling pathway.

Our previous studies have indicated that long noncoding RNA (lncRNA) SPRY4 intronic transcript 1 (SPRY4-IT1) was highly expressed in hepatocellular carcinoma (HCC). However, it still remained unclear how SPRY4-IT1 worked in tumorgenesis in HCC. In this study, we tested the overexpression of SPRY4-IT1 in HCC tissues and cells through a quantitative real-time polymerase chain reaction. Statistical analyses showed that the upregulation had an association with the tumor node metastasis stage, thrombin time, and alkaline phosphatase. Furthermore, SPRY4-IT1 could be involved in cell proliferation, metastasis, and the epithelial-to-mesenchymal transition (EMT) process in HCC in vitro and in vivo. RNA-sequencing and transcriptome analysis were carried out to explore the mechanism of SPRY4-IT1 in HCC. With SPRY4-IT1 being knocked down or overexpressed, the level of proteins in the tumor necrosis factor (TNF) signaling pathway changed. We detected the RNA binding protein heterogeneous nuclear ribonucleoprotein L (HNRNPL) as a SPRY4-IT1 interacting protein through RNA pull-down assay and liquid chromatography-mass spectrometry, then verified through RNA immunoprecipitation. Downregulation of HNRNPL induced the change of proteins observed on SPRY4-IT1 downregulation revealing the SPRY4-IT1: HNRNPL complex in the TNF signaling pathway and EMT process in HCC. In general, our experimental data and analysis demonstrated the role of SPRY4-IT1 in promoting progress and metastasis of HCC by the TNF signaling pathway.

Bactericidal Properties of Plasmonic Photocatalysts Composed of Noble Metal Nanoparticles on Faceted Anatase Titania.

Octahedral anatase particles (OAP) with eight equivalent {101} facets and decahedral anatase particles (DAP) with two additional {001} facets were modified with nanoparticles of noble metals (silver, copper, gold and platinum) by photodeposition, and applied for inactivation of Escherichia coli K12. XRD, DRS, XPS and STEM analyses confirmed the presence of noble metals nanoparticles (NPs) on the surface of faceted titania samples. Both OAP and DAP samples modified with silver and copper exhibited high bactericidal activities under visible light irradiation. It was also found that DAP under UV irradiation showed surprisingly high bactericidal activity, which could be attributed to efficient generation of reactive oxygen species, due to intrinsic properties of DAP, i.e., charge carriers' separation (migration of electrons and holes to {101} and {001} facets, respectively). However, an unexpected decrease in activity after DAP modification with gold and platinum NPs (mainly deposited on {101} facets) suggested that bacteria cells were directly decomposed on DAP surface. SEM images revealed that silver-modified samples caused severe damages of cell walls and membranes, due to antibacterial properties of silver (in the dark) and photocatalytic effect under visible and UV irradiation.

EFFECT OF WATER ACTIVITY AND TITANIA P25 PHOTOCATALYST ON INACTIVATION OF PATHOGENIC FUNGI--CONTRIBUTION TO THE PROTECTION OF PUBLIC HEALTH.

AIM: The aim of this study was to determine the antifungal activity of titanium dioxide activated by indoor light on Czapek Yeast Agar (CYA). METHODS: The agar plate method was used and titania P25 (Evonik) was added to the medium in the amount of 20 g.dm(-3). The control experiments without titania were also carried out. The water activity (a(w)) of the basal media was adjusted to 0.999, 0.997, 0.975, 0.950, 0.900 and 0.850 with sodium chloride. The photoactivity of titania was tested for six strains of potentially pathogenic fungi: Aspergillus versicolor (WB130, W11), Stachybotrys chartarum (STA1), Pseudallescheria boydii (AP25), Pseudallescheria ellipsoidea (ZUT1 2), Scedosporium apiospermum (ZUT1 1), Scedosporium aurantiacum (ZUT4BIS). After inoculation with fungal spore suspensions, one part of CYA plates was incubated in dark, while another part was daily exposed to indoor light for 12 hours per day.The plates were incubated at 25°C for 10 days. The daily growth rates (mm x day(-1)) were calculated from the linear regression equation. RESULTS: The CYA supplementation with titanium dioxide for different availability of water resulted in the decrease of fungal growth rates in dark and under irradiation. The lowest and the highest rates of daily growth were obtained in the presence and absence of titania for the low and high water activity (0.900 a(w) and 0.999 a(w)), respectively. CONCLUSIONS: Fungi did not grow on all examined media with the lowest water activity (a(w) ≤ 0.850) which confirmed necessity of water for their growth. The fungi Pseudallescheria-Scedosporium were the most sensitive to titania and water activity, while the strains of Aspergillus versicolor were the most resistant to the presence of titania and lack of water. It has been shown that the lack of accessible water resulted in the strongest action of titanium dioxide both in dark and under irradiation. For the lowest amount of accessible water irradiation of titania resulted in complete inhibition of fungal growth. While, under dark conditions, titania presence enhanced the growth of persistent fungi, i.e., Aspergillus versicolor. It is assumed that these fungi could obtain water from the water-rich titania surface.

Can photocatalysis help in the fight against COVID-19 pandemic?

Mould fungi are serious threats to humans and animals (allergen) and might be the main cause of COVID-19-associated pulmonary aspergillosis. The common methods of disinfection are not highly effective against fungi due to the high resistance of fungal spores. Recently, photocatalysis has attracted significant attention towards antimicrobial action. Outstanding properties of titania photocatalysts have already been used in many areas, e.g., for building materials, air conditioner filters, and air purifiers. Here, the efficiency of photocatalytic methods to remove fungi and bacteria (risk factors for Severe Acute Respiratory Syndrome Coronavirus 2 co-infection) is presented. Based on the relevant literature and own experience, there is no doubt that photocatalysis might help in the fight against microorganisms, and thus prevent the severity of COVID-19 pandemic.

Activation of AMPK ameliorates acute severe pancreatitis by suppressing pancreatic acinar cell necroptosis in obese mice models.

Obese people with acute pancreatitis (AP) have an increased risk of developing severe acute pancreatitis (SAP), which prolongs the length of hospital stay and increases mortality. Thus, elucidation of the mechanisms through which SAP occurs in obese individuals will provide clues for possible treatment targets. Differences in early events in obese or lean patients with AP have not been conclusively reported. We selected C57BL/6 mice as lean mice models, ob/ob mice or diet induced obese (DIO) mice as obese mice models and then induced experimental AP in mice via injections of caerulein. There were suppressed p-AMPK expressions in the pancreas of obese mice, compared with same-age lean C57BL/6 mice, which were further reduced in AP mice models. Obese AP mice were treated using AICAR, a direct AMPK agonist, which prevented pancreatic damage and cell death, suppressed pancreatic enzyme levels in serum, reduced the areas of fat saponification in the peritoneal cavity, prevented injury in other organs and decreased mice mortality rate. Further assays showed that AICAR activates p-AMPK to stabilize pro-caspase-8. Pro-caspase-8 enhances RIPK3 degradation, inhibits pancreatic acinar cell necroptosis, and downregulates the release of pancreatic enzymes. Thus, activation of AMPK by AICAR alleviates pancreatic acinar cell necroptosis and converts SAP to mild acute pancreatitis in obese mice.

Property-governed performance of platinum-modified titania photocatalysts.

Titania is probably the most widely investigated semiconductor photocatalyst because of various advantages, such as high activity, thermal and chemical stability, low price, abundance, and negligible toxicity. However, pristine titania is also characterized by charge carriers' recombination, and thus lower quantum yields of photocatalytic reactions than theoretical 100%. Moreover, its wide bandgap, despite being recommended for excellent redox properties, means also inactivity under visible part of solar radiation. Accordingly, titania has been surface modified, doped and coupled with various elements/compounds. For example, platinum deposited on the surface of titania has shown to improve both UV activity and the performance under vis. Although the studies on titania modification with platinum started almost half a century ago, and huge number of papers have been published up to now, it is unclear which properties are the most crucial and recommended to obtain highly efficient photocatalyst. In the literature, the opposite findings could be found on the property-governed activities that could result from huge differences in the reaction systems, and also examined photocatalysts. Considering the platinum properties, its content, the size of nanoparticles and the oxidation state, must be examined. Obviously, the characteristics of titania also influence the resultant properties of deposited platinum, and thus the overall photocatalytic performance. Although so many reports on Pt/TiO2 have been published, it is hardly possible to give indispensable advice on the recommended properties. However, it might be concluded that usually fine platinum NPs uniformly deposited on the titania surface result in high photocatalytic activity, and thus in the low optimal content of necessary platinum. Moreover, the aggregation of titania particles might also help in the lowering the necessary platinum amount (even to 0.2 wt%) due to the interparticle electron transfer mechanism between titania particles in one aggregate. In respect of platinum state, it is thought that it is highly substrate-specific case, and thus either positively charged or zero valent platinum is the most recommended. It might be concluded that despite huge number of papers published on platinum-modified titania, there is still a lack of comprehensive study showing the direct correlation between only one property and the resultant photocatalytic activity.

Development of Sulfur-Doped Graphitic Carbon Nitride for Hydrogen Evolution under Visible-Light Irradiation.

Developing eco-friendly strategies to produce green fuel has attracted continuous and extensive attention. In this study, a novel gas-templating method was developed to prepare 2D porous S-doped g-C3N4 photocatalyst through simultaneous pyrolysis of urea (main g-C3N4 precursor) and ammonium sulfate (sulfur source and structure promoter). Different content of ammonium sulfate was examined to find the optimal synthesis conditions and to investigate the property-governed activity. The physicochemical properties of the obtained photocatalysts were analyzed by X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), scanning transmission electron microscopy (STEM), specific surface area (BET) measurement, ultraviolet-visible light diffuse reflectance spectroscopy (UV/vis DRS), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) spectroscopy and reversed double-beam photo-acoustic spectroscopy (RDB-PAS). The as-prepared S-doped g-C3N4 photocatalysts were applied for photocatalytic H2 evolution under vis irradiation. The condition-dependent activity was probed to achieve the best photocatalytic performance. It was demonstrated that ammonium sulfate played a crucial role to achieve concurrently 2D morphology, controlled nanostructure, and S-doping of g-C3N4 in a one-pot process. The 2D nanoporous S-doped g-C3N4 of crumpled lamellar-like structure with large specific surface area (73.8 m2 g-1) and improved electron-hole separation showed a remarkable H2 generation rate, which was almost one order in magnitude higher than that of pristine g-C3N4. It has been found that though all properties are crucial for the overall photocatalytic performance, efficient doping is probably a key factor for high photocatalytic activity. Moreover, the photocatalysts exhibit significant stability during recycling. Accordingly, a significant potential of S-doped g-C3N4 has been revealed for practical use under natural solar radiation.

Evaluation of Antifungal Properties of Titania P25.

Commercial titania photocatalyst­P25 was chosen for an antifungal property examination due to it exhibiting one of the highest photocatalytic activities among titania photocatalysts. Titania P25 was homogenized first (HomoP25) and then annealed at different temperatures. Additionally, HomoP25 was modified with 0.5 wt% or 2.0 wt% of platinum by a photodeposition method. The obtained samples were characterized by diffuse-reflectance spectroscopy (DRS), X-ray photoabsorption spectroscopy (XPS), X-ray diffraction (XRD) and Raman spectroscopy. Moreover, photocatalytic activity was tested for methanol dehydrogenation under UV/vis irradiation. The spore-destroying effect of photocatalysts was investigated against two mold fungal species, i.e., Aspergillus fumigatus and Aspergillus niger. Both the mycelium growth and API ZYM (estimation of enzymatic activity) tests were applied for the assessment of antifungal effect. It was found that annealing caused a change of surface properties of the titania samples, i.e., an increase in the noncrystalline part, a growth of particles and enhanced oxygen adsorption on its surface, which resulted in an increase in both the hydrogen evolution rate and the antifungal effect. Titania samples annealed at 300−500 °C were highly active during 60-min UV/vis irradiation, inhibiting the germination of both fungal spores, whereas titania modification with platinum (0.5 and 2.0 wt%) had negligible effect, despite being highly active for hydrogen evolution. The control experiments revealed the lack of titania activity in the dark, as well as high resistance of fungi for applied UV/vis irradiation in the absence of photocatalysts. Moreover, the complete inhibition of 19 hydrolases, secreted by both tested fungi, was noted under UV/vis irradiation on the annealed P25 sample. It is proposed that titania photocatalysts of large particle sizes (>150 nm) and enriched surface with oxygen might efficiently destroy fungal structures under mild irradiation conditions and, thus, be highly promising as covering materials for daily products.

Pyroptosis-related genes regulate proliferation and invasion of pancreatic cancer and serve as the prognostic signature for modeling patient survival.

OBJECTIVE: Pancreatic ductal adenocarcinoma (PDAC) has high mortality and poor prognosis. Pyroptosis can influence the prognosis of patients by regulating the proliferation, invasion, and metastasis of cancer cells. However, the role of pyroptosis-related genes (PRGs) in PDAC remains unclear. METHODS: In this study, based on the Cancer Genome Atlas (TCGA) cohort of PDAC samples, univariate Cox analysis and LASSO regression analysis were used to screen the prognostic PRGs and establish the gene signature. To further evaluate the functional significance of CASP4 and NLRP1 in PDAC, we also conducted an in vitro study to explore the mechanism of CASP4 and NLRP1 regulating the occurrence and development of PDAC. Finally, we investigated the relationship between CASP4 and NLRP1 expression levels and drug sensitivity in pancreatic cancer cells. RESULTS: A risk prediction model based on CASP4 and NLRP1 was established, which can distinguish high-risk patients from low-risk patients (P < 0.001). Both internal validation and external GEO data sets validation demonstrate good predictive capability of the model (AUC = 0.732, AUC = 0.802, AUC = 0.632, P < 0.05). In vitro, CCK8 and Transwell assay suggested that CASP4 may accelerate the progression of PDAC by promoting proliferation and migration of pancreatic cancer cells, while NLRP1 has been found to have tumor suppressive effect. It should be noted that knockdown of CASP4 reduced the level of coke death, the expression levels of acetyl-CoA carboxylase, FASN, SREBP-1 and SREBP-2 were decreased, and the number of lipid droplets was also significantly reduced. Moreover, the enrichment of signaling pathways showed that NLRP1 was significantly correlated with MAPK and RAS/ERK signaling pathways, and knocking down NLRP1 could indeed up-regulate p-ERK expression. Finally, high expression of CASP4 and low expression of NLRP1 increased the sensitivity of pancreatic cancer cells to ERK inhibitors. CONCLUSIONS: In especial, CASP4 can promote tumor progression by promoting the synthesis and accumulation of fatty acids, while NLRP1 acts on RAS/ERK signaling pathway. Both of genes play an important role in the diagnosis and treatment of PDAC, which may also affect the inhibitors of MAPK/ERK efficiency.

Meiotic nuclear divisions 1 promotes proliferation and metastasis in hepatocellular carcinoma and is a potential diagnostic and therapeutic target gene.

Hepatocellular carcinoma is the cancer with the highest incidence among liver cancers and how to treat this cancer effectively is still a difficult problem we must face. We selected meiotic nuclear divisions 1 (MND1) as the study object by combining data from The Cancer Genome Atlas (TCGA) database with prognostic survival analysis. We validated the value of MND1 in evaluating the prognosis of hepatocellular carcinoma through a diagnostic and prognostic model. At the same time, cellular experiments were used to demonstrate the effect of MND1 on hepatocellular carcinoma proliferation and migration. We used short hairpin RNA (shRNA) to knock down MND1 in Hun7 and HCCLM3 cell lines. Through 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and colony formation assays, we found that knocking down MND1 reduced the proliferation of cells. Through wound healing and Transwell assays, we found that knocking down MND1 reduced cell migration and invasion. Moreover, we found that MND1 can promote the proliferation, migration, and invasion of Hep3B cells by overexpressing MND1. Therefore, in general, MND1 is expected to be a gene that can effectively diagnose and treat hepatocellular carcinoma.

USP53 plays an antitumor role in hepatocellular carcinoma through deubiquitination of cytochrome c.

Despite of advances in treatment options, hepatocellular carcinoma (HCC) remains nearly incurable and has been recognized as the third leading cause of cancer-related deaths worldwide. As a deubiquitinating enzyme, the antitumor effect of ubiquitin-specific peptidase 53 (USP53) has been demonstrated on few malignancies. In this study, we investigated the potential antitumor role of USP53 in HCC. The results showed that USP53 was downregulated in HCC tissues as well as in HCC cell lines using both in silico data as well as patient samples. Furthermore, the ectopic expression of USP53 inhibited the proliferation, migration and invasion, and induced the apoptosis of HCC cells. Co-immunoprecipitation (CO-IP) assay and mass spectrometry (MS) combined with the gene set enrichment analysis (GSEA) identified cytochrome c (CYCS) as an interacting partner of USP53. USP53 overexpression increased the stability of CYCS in HCC cells following cycloheximide treatment. Finally, the overexpression of CYCS compensated for the decreased apoptotic rates in cells with USP53 knocked down, suggesting that USP53 induced the apoptosis in HCC cells through the deubiquitination of CYCS. To summarize, we identified USP53 as a tumor suppressor as well as a therapeutic target in HCC, providing novel insights into its pivotal role in cell apoptosis.

Identification of a seven-long non-coding RNA signature associated with Jab1/CSN5 in predicting hepatocellular carcinoma.

Hepatocellular carcinoma (HCC) is a leading cause of cancer death worldwide, accounting for over 700,000 deaths each year. The lack of predictive and prognostic biomarkers for HCC, with effective therapy, remains a significant challenge for HCC management. Long non-coding RNAs (lncRNAs) play a key role in tumorigenesis and have clinical value as potential biomarkers in the early diagnosis and prediction of HCC. Jun activation domain-binding protein 1 (Jab1, also known as COP9 signalosome subunit 5, CSN5) is a potential oncogene that plays a critical role in the occurrence of HCC. Here, we performed a comprehensive analysis for Jab1/CSN5-associated lncRNAs to predict the prognosis of HCC. The differentially expressed (DE) lncRNAs between in HCC were analyzed based on the TCGA RNA-seq data. We detected 1031 upregulated lncRNAs in 371 HCC tissues and identified a seven-lncRNA signature strongly correlated with Jab1/CSN5 (SNHG6, CTD3065J16.9, LINC01604, CTD3025N20.3, KB-1460A1.5, RP13-582O9.7, and RP11-29520.2). We further evaluated the prognostic significance of these lncRNAs by GEPIA ( http://gepia.cancer-pku.cn/ ). The expression data in 364 liver tumors indicated that this seven-lncRNA signature could better predict worse survival in HCC patients. Moreover, 35 clinical HCC samples were evaluated to assess the validity and reproducibility of the bioinformatic analysis. We found that the targeted lncRNAs were upregulated, with a strong association with Jab1/CSN5 and prognostic value in HCC. Functional enrichment analysis by Gene Ontology (GO) showed that these seven prognostic lncRNAs exhibit oncogenic properties and are associated with prominent hallmarks of cancer. Overall, our findings demonstrate the clinical implication of Jab1/CSN5 with the seven-lncRNAs in predicting survival for patients with HCC.

Serum deprivation-response protein induces apoptosis in hepatocellular carcinoma through ASK1-JNK/p38 MAPK pathways.

Serum deprivation-response protein (SDPR), a phosphatidylserine-binding protein, which is known to have a promising role in caveolar biogenesis and morphology. However, its function in hepatocellular carcinoma (HCC) was still largely unknown. In this study, we discussed the characterization and identification of SDPR, and to present it as a novel apoptosis candidate in the incidence of HCC. We identified 81 HCC cases with lower SDPR expression in the tumor tissues with the help of qRT-PCR assay, and lower SDPR expression was potentially associated with poor prognostication. The phenotypic assays revealed that cell proliferation, invasion, and migration were profoundly connected with SDPR, both in vivo and in vitro. The data obtained from the gene set enrichment analysis (GSEA) carried out on the liver hepatocellular carcinoma (LIHC), and also The Cancer Genome Atlas (TCGA) findings indicated that SDPR was involved in apoptosis and flow cytometry experiments further confirmed this. Furthermore, we identified the interaction between SDPR and apoptosis signal-regulating kinase 1 (ASK1), which facilitated the ASK1 N-terminus-mediated dimerization and increased ASK1-mediated signaling, thereby activating the JNK/p38 mitogen-activated protein kinases (MAPKs) and finally enhanced cell apoptosis. Overall, this work identified SDPR as a tumor suppressor, because it promoted apoptosis by activating ASK1-JNK/p38 MAPK pathways in HCC.

Mono- and bimetallic (Pt/Cu) titanium(IV) oxide photocatalysts. Physicochemical and photocatalytic data of magnetic nanocomposites' shell.

Surface modification of titania with noble and semi-noble metals resulted in significant enhancement of photocatalytic activity. Presented data, showing the photocatalytic properties of TiO2-M (where M is Pt and/or Cu) photocatalysts were further used as Fe3O4@SiO2/TiO2-M magnetic nanocomposites shells in "Mono- and bimetallic (Pt/Cu) titanium(IV) oxide core-shell photocatalysts with Vis light activity and magnetic separability" [1]. Platinum and copper were photodeposited on four different titania matrices (commercial and self-obtained ones). The prepared photocatalysts were characterized by X-ray diffraction (XRD) analysis, specific surface area measurements using the Brunauer-Emmet-Teller (BET) isotherm, diffuse reflectance spectroscopy (DR-UV/Vis) analysis as well as scanning transmission electron microscopy (STEM) analysis. Photocatalytic properties were investigated in three different reactions: H2 generation, acetic acid oxidation to CO2, and phenol degradation.

Rapid synthesis of a Bi@ZIF-8 composite nanomaterial as a near-infrared-II (NIR-II) photothermal agent for the low-temperature photothermal therapy of hepatocellular carcinoma.

Hepatocellular carcinoma is the fourth leading cause of cancer-related deaths globally. Advanced nanomaterials have emerged as effective approaches to liver cancer therapy such as photothermal therapy. However, limited penetration depth of photothermal agents (PTAs) activated in the NIR-I bio-window and thermoresistance due to heat shock proteins restrict the therapeutic efficacy of PTT in HCC. Herein, we prepared a Bi@ZIF-8 (BZ) nanomaterial by a simple one-step reduction method. Then, gambogic acid, a natural inhibitor of Hsp90, was efficiently loaded onto the BZ nanomaterial via physical mixing. The characterization of the nanomaterial and release of GA due to pH change or NIR-light irradiation were separately studied. Photothermal conversion efficiency was calculated, and therapeutic studies were carried out in vitro and in vivo. This nanomaterial exhibited a significantly enhanced drug release rate when the temperature was increased under acidic conditions and had good light stability under laser irradiation and a photothermal conversion efficiency of about 24.4%. In addition, this novel nanomaterial achieved good therapeutic effects with less toxicity in vitro. The BZ nanomaterial loaded with GA caused tumor shrinkage as well as disappearance and effectively downregulated Hsp90 expression in tumors in vivo. Moreover, this novel nanomaterial exhibited good biocompatibility and potential for application in low-temperature PTT with excellent tumor destruction efficacy.

Influence of Semiconductor Morphology on Photocatalytic Activity of Plasmonic Photocatalysts: Titanate Nanowires and Octahedral Anatase Nanoparticles.

Octahedral anatase particles (OAP) with eight exposed and thermodynamically most stable (101) facets were prepared by an ultrasonication-hydrothermal (US-HT) reaction from potassium titanate nanowires (TNW). The precursor (TNW) and the product (OAP) of US-HT reaction were modified with nanoparticles of noble metals (Au, Ag or Pt) by photodeposition. Samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS), scanning transmission electron microscopy (STEM) and time-resolved microwave conductivity (TRMC). The photocatalytic activity was investigated in three reaction systems, i.e., anaerobic dehydrogenation of methanol and oxidative decomposition of acetic acid under UV/vis irradiation, and oxidation of 2-propanol under vis irradiation. It was found that hydrogen liberation correlated with work function of metals, and thus the most active were platinum-modified samples. Photocatalytic activities of bare and modified OAP samples were much higher than those of TNW samples, probably due to anatase presence, higher crystallinity and electron mobility in faceted NPs. Interestingly, noble metals showed different influence on the activity depending on the semiconductor support, i.e., gold-modified TNW and platinum-modified OAP exhibited the highest activity for acetic acid decomposition, whereas silver- and gold-modified samples were the most active under vis irradiation, respectively. It is proposed that the form of noble metal (metallic vs. oxidized) as well as the morphology (well-organized vs. uncontrolled) have a critical effect on the overall photocatalytic performance. TRMC analysis confirmed that fast electron transfer to noble metal is a key factor for UV activity. It is proposed that the efficiency of plasmonic photocatalysis (under vis irradiation) depends on the oxidation form of metal (zero-valent preferable), photoabsorption properties (broad localized surface plasmon resonance (LSPR)), kind of metal (silver) and counteraction of "hot" electrons back transfer to noble metal NPs (by controlled morphology and high crystallinity).

An Integrated Structural Air Electrode Based on Parallel Porous Nitrogen-Doped Carbon Nanotube Arrays for Rechargeable Li-Air Batteries.

The poor discharge and charge capacities, and the cycle performance of current Li-air batteries represent critical obstacles to their practical application. The fabrication of an integrated structural air electrode with stable parallel micropore channels and excellent electrocatalytic activity is an efficient strategy for solving these problems. Herein, a novel approach involving the synthesis of nitrogen-doped carbon nanotube (N-CNT) arrays on a carbon paper substrate with a conductive carbon-black layer for use as the air electrode is presented. This design achieves faster oxygen, lithium ion, and electron transfer, which allows higher oxygen reduction/evolution reaction activities. As a result, the N-CNT arrays (N/C = 1:20) deliver distinctly higher discharge and charge capacities, 2203 and 186 mAh g-1, than those of active carbons with capacities of 497 and 71 mAh g-1 at 0.05 mA cm-2, respectively. A theoretical analysis of the experimental results shows that the parallel micropore channels of the air electrode decrease oxygen diffusion resistance and lithium ion transfer resistance, enhancing the discharge and charge capacities and cycle performance of Li-air batteries. Additionally, the N-CNT arrays with a high pyridinic nitrogen content can decompose the lithium peroxide product and recover the electrode morphology, thereby further improving the discharge-charge performance of Li-air batteries.

Carbon/Graphene-Modified Titania with Enhanced Photocatalytic Activity under UV and Vis Irradiation.

Laser synthesis was used for one-step synthesis of titania/graphene composites (G-TiO2 (C)) from a suspension of 0.04 wt% commercial reduced graphene oxide (rGO) dispersed in liquid titanium tetraisopropoxide (TTIP). Reference titania sample (TiO2(C)) was prepared by the same method without graphene addition. Both samples and commercial titania P25 were characterized by various methods and tested under UV/vis irradiation for oxidative decomposition of acetic acid and dehydrogenation of methanol (with and without Pt co-catalyst addition), and under vis irradiation for phenol degradation and inactivation of Escherichia coli. It was found that both samples (TiO2(C) and G-TiO2(C)) contained carbon resulting from TTIP and C2H4 (used as a synthesis sensitizer), which activated titania towards vis activity. The photocatalytic activity under UV/vis irradiation was like that by P25. The highest activity of TiO2(C) sample for acetic acid oxidation was probably caused by its surface enrichment with hydroxyl groups. G-TiO2(C) was the most active for methanol dehydrogenation in the absence of platinum (ca. five times higher activity than that by TiO2(C) and P25), suggesting that graphene works as a co-catalyst for hydrogen evolution. High activity under both UV and vis irradiation for decomposition of organic compounds, hydrogen evolution and inactivation of bacteria suggests that laser synthesis allows preparation of cheap (carbon-modified) and efficient photocatalysts for broad environmental applications.