ABSTRACT
This study aimed to compare the antibacterial effects of different agitation devices on single- and multispecies biofilms in dentin canals using confocal laser scanning microscopy (CLSM). Dentin blocks were prepared from human root dentin. Enterococcus faecalis and multiple species were introduced into the dentinal tubules via centrifugation and incubation. Two infected dentin samples were placed at 8 and 16 mm in a customized model. Samples were randomly divided into eight groups according to the agitation device used: syringe needle irrigation, EndoActivator, passive ultrasonic irrigation (PUI), and EDDY, at 2.5% or 6% NaOCl concentrations. The samples were stained and observed using CLSM. Statistical analysis was performed using an independent sample t test and analysis of variance. Linear models were used to assess the joint impact of the experimental groups on the proportion of biofilms killed. No significant differences were observed between the killing rates of the single- and multispecies biofilms. Both concentrations of NaOCl significantly increased the percentage of dead bacteria compared with the control. Biofilms in dentin tubules was more effectively killed when NaOCl was agitated; however, the difference between PUI and EDDY was not significant. Significantly more bacteria were killed in dentin blocks placed at 8 mm than at 16 mm (p < 0.05). In conclusion, EDDY was as effective as PUI when combined with NaOCl. However, the apical portion, which had a low antimicrobial efficiency, remains a concern. Mechanical instrumentation is incapable of completely eradicating bacteria, and additional research is required to improve the efficacy of root canal disinfection.
Subject(s)
Dental Pulp Cavity , Dentin , Humans , Sodium Hypochlorite/pharmacology , Root Canal Irrigants/pharmacology , Bacteria , Biofilms , Enterococcus faecalisABSTRACT
BACKGROUND: Exopolysaccharides (EPS) are essential constituents of the extracellular matrix within oral biofilms and are significantly influenced by the local microenvironment. This study aimed to investigate the impact of two distinct antimicrobial agents, DJK-5 and chlorhexidine (CHX), on the EPS volume and pH levels in oral biofilms. METHODS: Oral biofilms obtained from two donors were cultured on hydroxyapatite discs for durations of 3 days, 1 week, 2 weeks, 3 weeks, and 4 weeks. Subsequently, these biofilms were subjected to treatment with 10 µg/mL DJK-5 or 2% CHX for 3 min. The impact of these antimicrobial treatments on factors such as the proportion of dead bacterial, in situ pH, and EPS volume within the biofilms was assessed using corresponding fluorescent probes. The examination was carried out utilizing confocal laser scanning microscopy, and the resulting images were analyzed with a focus on the upper and lower layers of the biofilm, respectively. RESULTS: DJK-5 exhibited a more potent bactericidal effect compared to CHX across the 3-day to 4-week duration of the biofilm (P < 0.05). The biofilms were acidic, with the upper layer being less acidic than the lower layer (P < 0.05). Both antimicrobial agents increased the pH, but DJK-5 had a greater effect than CHX (P < 0.05). The volume of EPS was significantly lower in DJK-5 treated biofilms compared to that of CHX, regardless of age or layer (P < 0.05). CONCLUSION: DJK-5 exhibited superior effectiveness in reducing viable bacteria and EPS volume, as well as in raising extracellular pH, as compared to chlorhexidine.
Subject(s)
Biofilms , Chlorhexidine , Humans , Chlorhexidine/pharmacology , Durapatite , Anti-Bacterial Agents/pharmacology , Hydrogen-Ion ConcentrationABSTRACT
BACKGROUND: Platelet Concentrate (PC) injection therapy has shown potential as a local therapy for oral lichen planus (OLP). However, its safety and efficacy have not yet been fully established. Our research compared the efficacy of PC with topical steroid treatment in alleviating pain and symptoms related to OLP. We aims to present evidence-based alternatives that dentists can use to improve patient outcomes while reducing potential side effects. METHODS: We conducted a systematic search of five electronic databases up to April 2023, including Embase, Cochrane Central Register of Controlled Trials, PubMed, OVID Medline, and WanFang, to evaluate PCs' efficacy compared to topical corticosteroid therapy for OLP. The literature quality was assessed using the Cochrane ROB tool. A fixed-effects model was used to determine the Weighted Mean Difference (WMD) and Mean Difference (MD) at a 95% confidence interval (CI) for pain severity and other relevant clinical indicators. RESULTS: The comparison between topical corticosteroid therapy and PCs showed no significant difference for pain relief (WMD = -0.07, CI = 95% -0.34 to 0.19), symptom improvement (MD = -0.21, CI = 95% -0.55 to 0.13), or the severity of included lesions measured by REU scores (MD = -0.25, CI = 95% -0.32 to 0.82). CONCLUSIONS: Locally injected PC have been found efficient in managing oral lichen planus, indicating that they are a promising alternative option to steroid therapy for OLP patients, particularly those who have not responded favorably to steroid therapy. However, further research is needed to establish determining the recurrence rate and long-term adverse effects. TRIAL REGISTRATION: The systematic review protocol has been registered in advance with the PROSPERO database (CRD42023415372).
Subject(s)
Lichen Planus, Oral , Humans , Lichen Planus, Oral/drug therapy , Palliative Care , Pain , Pain Management , Adrenal Cortex Hormones/therapeutic useABSTRACT
BACKGROUND: Bioceramic cements have been widely used in endodontic treatment. This study aimed to compare the microhardness, elastic modulus, internal microstructure and chemical compositions of Biodentine, WMTA, ERRM Putty, iRoot FS and IRM after exposure to PBS, butyric acid, and butyric acid followed by PBS. METHODS: Specimens of each material were prepared and randomly divided into 5 subgroups (n = 5): subgroup A: PBS (pH = 7.4) for 4 days, subgroup B: PBS (pH = 7.4) for 14 days, subgroup C: butyric acid (pH = 5.4) for 4 days, subgroup D: butyric acid (pH = 5.4) for 14 days, subgroup E: butyric acid for 4 days followed by 10 days in contact with PBS. The surface microhardness, elastic modulus, internal morphologic and chemical compositions of specimens were analyzed. RESULTS: The microhardness and elastic modulus values of all materials were significantly higher in the presence of PBS compared to exposure to butyric acid, with the same setting time (P < 0.01). After 4-day exposure to butyric acid followed by 10-day exposure to PBS, the microhardness values returned to the same level as 4-day exposure to PBS (P > 0.05). Biodentine showed significantly higher microhardness and elastic modulus values than other materials, while IRM displayed the lowest (P < 0.01). CONCLUSION: Biodentine seems the most suitable bioceramic cements when applied to an infected area with acidic pH. Further storage at neutral pH, e.g. PBS reverses the adverse effects on bioceramic cements caused by a low pH environment.
Subject(s)
Calcium Compounds , Oxides , Humans , Aluminum Compounds/chemistry , Butyric Acid , Calcium , Calcium Compounds/pharmacology , Calcium Compounds/chemistry , Calcium Phosphates , Dental Cements/chemistry , Drug Combinations , Materials Testing , Oxides/chemistry , Silicates/pharmacology , Silicates/chemistryABSTRACT
OBJECTIVE: To evaluate the percentage volume of voids and gaps in oval-shaped canals obturated using two different methods with a tricalcium silicate-based sealer after short- or long-term storage. The long-term effect of storage on the efficiency of removing filling material was also investigated. MATERIALS AND METHODS: Forty premolar teeth with oval-shaped canals were instrumented to Reciproc R25 and obturated using single cone obturation (SCO) or warm vertical compaction (WVC) techniques with gutta-percha and HiFlow sealer. The specimens were stored at 100% humidity and 37°C for 2 weeks or 6 months and scanned using micro-computed tomography. Initial retreatment was performed up to a Reciproc R40, and the operating time was recorded. The residual material in the canal received a supplementary procedure using XP-endo Finisher R (XPFR) files. After each retreatment procedure, the specimens were rescanned. RESULTS: The percentage volume of voids and gaps in the SCO group was higher than that of the WVC group at both 2 weeks and 6 months (P < 0.05). The percentage volume of the filling material removed after initial retreatment and XPFR cleaning was significantly higher in the 6-month group than in the 2-week groups (P < 0.05). The proportion of the residual material decreased significantly when XPFR files were used, compared to the initial retreatment group (P < 0.05) in both storage times. CONCLUSION: The efficiency of retreatment in the oval-shaped canal was closely related to the storage time rather than the filling technique using a tricalcium silicate sealer. The XPFR instrument proved effective in the removal of the remaining materials from the oval-shaped canal. CLINICAL RELEVANCE: Obturation of the oval-shaped canal with TSBS using the SCO technique in the coronal area needs to be optimized. The retreatment was less efficacious in freshly filled canals than aged filled canals.
Subject(s)
Root Canal Filling Materials , Root Canal Obturation , Calcium Compounds , Dental Pulp Cavity/diagnostic imaging , Gutta-Percha , Porosity , Retreatment , Root Canal Preparation , Silicates , X-Ray MicrotomographyABSTRACT
OBJECTIVES: To dynamically evaluate the effect of four root canal sealers on the killing of biofilms within dentinal tubules. MATERIALS AND METHODS: Dentin blocks were prepared for infection of the dentinal tubules. Enterococcus faecalis VP3-181 and multi-species bacteria from two donors were cultured. After 3 days of incubation, the infected dentin specimens were rinsed with sterile water for 1 min and subjected to treatment. Additionally, multi-species bacteria from donor 1 were incubated for 3 weeks to allow biofilm maturation and then the specimens were subjected to treatment. Gutta-percha-treated dentin specimens comprised the control group. A root canal sealer (bioceramic sealers: EndoSequence BC Sealer, ProRoot Endo Sealer, or GuttaFlow Bioseal; and a traditional silicone-based sealer: Guttaflow 2) was spread onto the canal walls of the dentin. The specimens were examined with confocal laser scanning microscopy at 7, 30, or 60 days. RESULTS: In the 3-day-old biofilm group, the proportion of killed bacteria decreased significantly from the first 7 days of treatment to 60 days of treatment for all sealers (p < 0.05). In the 3-week-old biofilm group, 60 days of exposure to bioceramic sealers resulted in more significant dead bacteria than 7-day exposures of the biofilms (p < 0.05). Bioceramic sealers were more effective in killing bacteria than the GuttaFlow 2 sealer (p < 0.05). CONCLUSIONS: Calcium silicate-based sealers showed good antimicrobial effects against biofilms within dentinal tubules, especially in the first week in young biofilms. There is no substantive antibacterial activity observed for the examined root canal sealers against young dentinal tubule biofilms. CLINICAL RELEVANCE: The bioceramic root canal sealers examined demonstrate minimal additional antibacterial effects after long-term exposure to young biofilms.
Subject(s)
Dental Pulp Cavity , Root Canal Filling Materials , Anti-Bacterial Agents/pharmacology , Biofilms , Dentin , Enterococcus faecalis , Epoxy Resins , Microscopy, Confocal , Root Canal Filling Materials/pharmacologyABSTRACT
The purpose is to evaluate the efficacy of different irrigation techniques in the removal of various calcium hydroxide [Ca(OH)2] and barium sulfate [BaSO4] formulations from three isthmuses in 3-dimensional (3D) printed molar root canal models. 3D printed transparent models were designed, fabricated, and filled with pure Ca(OH)2 paste, Ca(OH)2-BaSO4 8:1 paste, Ca(OH)2-BaSO4 1:1 paste, pure BaSO4 paste, all in water, and Diapaste. Open-ended needle irrigation (ONI) at 5 and 15 mL/min, double-side-vented needle irrigation (DNI) at 5 mL/min, the GentleWave system (GW), PiezoFlow (PF), and passive ultrasonic activation (PUI) with distilled water, 0.5% sodium hypochlorite (NaOCl) and 3% NaOCl were used to remove the materials from the isthmuses. Ninety groups (n = 10) were established. The removal time was recorded from the start of irrigation to the completion of removal. GW and PF were the only methods that removed all tested materials from the isthmuses. PF required 2-3 × as much time as GW for complete removal, depending on the BaSO4 content of the paste. ONI at 15 mL/min removed pure Ca(OH)2 paste, Ca(OH)2-BaSO4 (8:1) paste, Ca(OH)2-BaSO4 (1:1) completely but could not completely remove pure BaSO4 paste and Diapaste. PUI with intermittent needle irrigation, ONI, and DNI at 5 mL/min were not able to completely remove any of the materials within 7.5 min. The GW removed all materials faster than PF, whereas other methods failed to remove all materials from the isthmuses. Pure Ca(OH)2 and the mixture with BaSO4 paste in the proportion 8:1 were removed in less time than the other mixtures by the GW, PF and ONI systems, the latter only when using 15 mL/min flow rate.
Subject(s)
Barium Sulfate , Calcium Hydroxide , Dental Pulp Cavity , Printing, Three-Dimensional , Root Canal Irrigants , Root Canal Preparation , Sodium Hypochlorite , Therapeutic IrrigationABSTRACT
KEY MESSAGE: A stress induced calcium-binding protein, RD20/CLO3 interacts with the alpha subunit of the heterotrimeric G-protein complex in Arabidopsis and affects etiolation and leaf morphology. Heterotrimeric G proteins and calcium signaling have both been shown to play a role in the response to environmental abiotic stress in plants; however, the interaction between calcium-binding proteins and G-protein signaling molecules remains elusive. We investigated the interaction between the alpha subunit of the heterotrimeric G-protein complex, GPA1, of Arabidopsis thaliana with the calcium-binding protein, the caleosin RD20/CLO3, a gene strongly induced by drought, salt and abscisic acid. The proteins were found to interact in vivo by bimolecular fluorescent complementation (BiFC); the interaction was localized to the endoplasmic reticulum and to oil bodies within the cell. The constitutively GTP-bound GPA1 (GPA1QL) also interacts with RD20/CLO3 as well as its EF-hand mutant variations and these interactions are localized to the plasma membrane. The N-terminal portion of RD20/CLO3 was found to be responsible for the interaction with GPA1 and GPA1QL using both BiFC and yeast two-hybrid assays. RD20/CLO3 contains a single calcium-binding EF-hand in the N-terminal portion of the protein; disruption of the calcium-binding capacity of the protein obliterates interaction with GPA1 in in vivo assays and decreases the interaction between the caleosin and the constitutively active GPA1QL. Analysis of rd20/clo3 mutants shows that RD20/CLO3 plays a key role in the signaling pathway controlling hypocotyl length in dark grown seedlings and in leaf morphology. Our findings indicate a novel role for RD20/CLO3 as a negative regulator of GPA1.
Subject(s)
Arabidopsis Proteins/genetics , Arabidopsis Proteins/metabolism , Arabidopsis/physiology , Calcium-Binding Proteins/metabolism , GTP-Binding Protein alpha Subunits/genetics , Stress, Physiological/physiology , Calcium-Binding Proteins/genetics , Darkness , GTP-Binding Protein alpha Subunits/metabolism , Gene Expression Regulation, Plant , Hypocotyl/genetics , Hypocotyl/growth & development , Mutation , Plant Leaves/physiology , Plants, Genetically Modified , Nicotiana/genetics , Nicotiana/metabolism , Two-Hybrid System TechniquesABSTRACT
BACKGROUND: Patient-derived tumor organoid culture has emerged as a preclinical model that has the potential to predict individual drug response. However, the predictive accuracy of patient-derived tumor organoid culture models for responses to chemotherapy regimens in stage IV colorectal cancer remains unknown. OBJECTIVE: The purpose of this study was to evaluate the predictive accuracy of the patient-derived tumor organoid culture model for responses to chemotherapy regimens in stage IV colorectal cancer. DESIGN: A pilot study was performed to define the half-maximal inhibitory concentration of the response to chemotherapy regimens in the patient-derived tumor organoid culture model. Then, a blinded study was performed to evaluate the predictive accuracy of the patient-derived tumor organoid culture model for responses to chemotherapy regimens. SETTINGS: Cancer samples were collected from patients with stage IV colorectal cancer at Nanfang Hospital of Southern Medical University in China. PATIENTS: In the pilot study, 30 patients were enrolled, and 43 samples were collected. In the blinded study, 71 patients were enrolled, and 96 samples were collected. INTERVENTION: Patient-derived tumor organoid culture and chemotherapy regimens were tested. MAIN OUTCOME MEASURES: The predictive accuracy of the patient-derived tumor organoid model for responses to chemotherapy regimens was measured. RESULTS: The median (range) time of organoid culture and drug testing was 9 days (range, 7-14 d). In the pilot study, 30 samples (69.77% [30/43]) were successfully cultured. The half-maximal inhibitory concentration of the chemotherapy response was 10 µmol/L according to clinical chemotherapy outcomes. In the blinded study, 77 samples (80.21% [77/96]) from 57 patients were successfully cultured. The sensitivity, specificity, and accuracy of the patient-derived tumor organoid model for predicting responses to chemotherapy regimens were 63.33%, 94.12%, and 79.69%. LIMITATIONS: This was a blinded study rather than a prospective randomized controlled study. CONCLUSIONS: The patient-derived tumor organoid culture model effectively predicts responses to existing chemotherapy regimens for individual patients. Video Abstract at http://links.lww.com/DCR/B511. PRECISIN EN EL USO DE MODELOS DE CULTIVO DE ORGANOIDES TUMORALES DERIVADOS DE PACIENTES PARA PREDECIR LA RESPUESTA DEL RGIMEN DE QUIMIOTERAPIA EN CNCER COLORRECTAL ESTADIO IV ESTUDIO CIEGO: ANTECEDENTES:El cultivo de organoides tumorales derivado del paciente ha surgido como un modelo preclínico que tiene el potencial de predecir la respuesta a un fármaco individual. Sin embargo, la exactitud predictiva en los modelos de cultivo de organoides tumorales derivados de pacientes para las respuestas a los regímenes de quimioterapia en el cáncer colorrectal en estadio IV sigue siendo desconocida.OBJETIVO:Evaluar la exactitud predictiva del modelo de cultivo organoide tumoral derivado de pacientes para las respuestas a los regímenes de quimioterapia en el cáncer colorrectal en estadio IV.DISEÑO:Se realizó un estudio piloto para definir la concentración inhibitoria media máxima de la respuesta a los regímenes de quimioterapia en el modelo de cultivo organoide tumoral derivado de pacientes. Luego, se realizó un estudio ciego para evaluar la exactitud predictiva del modelo de cultivo organoide tumoral derivado de pacientes para las respuestas a los regímenes de quimioterapia.AJUSTE:Se recolectaron muestras de cáncer de pacientes con cáncer colorrectal en estadio IV en el Hospital Nanfang de la Universidad Médica del Sur en China.PACIENTES:En el estudio piloto, se inscribieron 30 pacientes y se recolectaron 43 muestras. En el estudio ciego, se inscribieron 71 pacientes y se recolectaron 96 muestras.INTERVENCIÓN:Se probaron cultivos de organoides de tumores derivados del paciente y regímenes de quimioterapia.PRINCIPALES MEDIDAS DE RESULTADO:La precisión predictiva del modelo organoide tumoral derivado del paciente para las respuestas a los regímenes de quimioterapia.RESULTADOS:La mediana (rango) de tiempo de cultivo organoide y prueba de drogas fue de 9 (7-14) días. En el estudio piloto, se cultivaron con éxito 30 (69,77% [30/43]) muestras. La concentración inhibidora media máxima de la respuesta a la quimioterapia fue de 10 µmol / L según los resultados de la quimioterapia clínica. En el estudio ciego, se cultivaron con éxito 77 muestras (80,21% [77/96]) de 57 pacientes. La sensibilidad, especificidad y precisión del modelo organoide tumoral derivado del paciente para predecir las respuestas a los regímenes de quimioterapia fueron 63,33%, 94,12% y 79,69%, respectivamente.LIMITACIONES:Este fue un estudio ciego en lugar de un estudio prospectivo, aleatorizado y controlado.CONCLUSIONES:El modelo de cultivo organoide tumoral derivado de pacientes predice eficazmente las respuestas a los regímenes de quimioterapia existentes para pacientes individuales. Consulte Video Resumen en http://links.lww.com/DCR/B511.
Subject(s)
Antineoplastic Combined Chemotherapy Protocols/therapeutic use , Colorectal Neoplasms/drug therapy , Colorectal Neoplasms/pathology , Organoids/drug effects , Adult , Aged , Antineoplastic Combined Chemotherapy Protocols/adverse effects , Antineoplastic Combined Chemotherapy Protocols/pharmacokinetics , China/epidemiology , Culture Techniques/methods , Dose-Response Relationship, Drug , Female , Humans , Male , Middle Aged , Neoplasm Staging/methods , Organoids/pathology , Pilot Projects , Predictive Value of Tests , Reproducibility of Results , Sensitivity and Specificity , Specimen Handling/methods , Treatment OutcomeABSTRACT
OBJECTIVES: To determine the effect of the location of the canal curvature on the fatigue resistance of WaveOne (WO), WaveOne Gold (WOG), Reciproc (Rec), and Reciproc Blue (RecB) files, and to examine the phase transformation behaviors of the reciprocating file systems. MATERIAL AND METHODS: The instruments were subjected to fatigue testing in five artificial canals with a curvature of 60° angle and a 3-mm radius. The location of the curvature was unique for each canal. Each file was inserted 16 mm into the canal and operated until fracture occurred. The time to fracture was recorded and the length of the fragment was measured. Differential scanning calorimetry was used to characterize the thermal behavior of the files. The number of cycles to failure was analyzed using two-way analysis of variance and the post hoc Tukey test. The Kruskal-Wallis test was used to compare the mean fragment lengths between groups. RESULTS: The instruments had significantly lower fatigue resistance in canals with curvatures in the middle and coronal canals compared with those with apical curvatures (p < 0.05). At all tested curvature locations, RecB had superior fatigue resistance compared with WO and Rec (p < 0.05). There were no significant differences between WOG and Rec in canals with curvatures in the middle and coronal canals. The DSC thermograms for RecB exhibit a single exothermic peak during cooling but double endothermic peaks during heating indicating that a two-step phase transformation from martensite to R-phase to austenite takes place. CONCLUSIONS: The reciprocating instruments experience decreased cyclic fatigue resistance when operated in canals with coronal- and middle-third curvatures when compared with curvatures in the apical-third. Instrumenting coronally positioned curvatures with reciprocating files needs to be performed with caution. CLINICAL RELEVANCE: The location of the root canal's curvature influences the fracture resistance of rotary files that are used with reciprocating movements. Therefore, caution needs to be exercised when using reciprocating instruments in canals with coronal or middle curvatures.
Subject(s)
Dental Instruments , Root Canal Preparation , Equipment Design , Equipment Failure Analysis , TitaniumABSTRACT
We develop a 3D hydrodynamic model to investigate the mechanism of antimicrobial persistence in a multi-species oral biofilm and its recovery after being treated by bisbiguanide chlorhexidine gluconate (CHX). In addition to the hydrodynamic transport in the spatially heterogeneous biofilm, the model also includes mechanisms of solvent-biomass interaction, bacterial phenotype conversion, and bacteria-drug interaction. A numerical solver for the model is developed using a second order numerical scheme in 3D space and time and implemented on GPUs for high-performance computing. The model is calibrated against a set of experimental data obtained using confocal laser scan microscopy (CLSM) on multi-species oral biofilms, where a quantitative agreement is reached. Our numerical results reveal that quorum sensing molecules and growth factors in this model are instrumental in biofilm formation and recovery after the antimicrobial treatment. In particular, we show that (i) young biofilms are more susceptible to the antimicrobial treatment than the mature ones, (ii) this phenomenon is strongly correlated with volume fractions of the persister and EPS in the biofilm being treated. This suggests that antimicrobial treatment should be best administered to biofilms earlier before they mature to produce a thick protective EPS layer. In addition, the numerical study also indicates that an antimicrobial effect can be achieved should a proper mechanism be devised to minimize the conversion of susceptible bacteria to persisters during and even after the treatment.
Subject(s)
Biofilms/growth & development , Drug Resistance, Bacterial/physiology , Microbial Consortia/physiology , Models, Biological , Quorum Sensing/physiologyABSTRACT
OBJECTIVES: The purpose of this study is to compare pressures at the apical foramen created by conventional syringe irrigation and the GentleWave™ System, which releases high-velocity degassed irrigants to the pulp chamber and uses broad-spectrum sound energy for cleaning. MATERIALS AND METHODS: The apical pressure generated during irrigation was measured for palatal and distobuccal root canals of four extracted maxillary molars after no instrumentation, minimal instrumentation to a size #15/.04, instrumentation to a size #40/.04 taper, and after perforating the apical foramen to size #40. The root canals opened into an air-tight custom fixture coupled to a piezoresistive pressure transducer. Apical pressures were measured for the GentleWave™ System and syringe-needle irrigation at different irrigant flow rates, with the needle tip at 1 and 3 mm from the apical foramen using 30-gauge (G) open-ended or side-vented safety tip needles. RESULTS: The GentleWave™ System generated negative apical pressures (P < 0.001 compared with syringe irrigation); the mean pressures were between -13.07 and -17.19 mmHg. The 30 G needles could not reach the 1 and 3 mm from the working length in uninstrumented and 1 mm in minimally instrumented canals. The mean positive pressures between 6.46 and 110.34 mmHg were measured with needle irrigation depending on the flow rate, needle insertion depth, and size of the root canal. CONCLUSIONS: The GentleWave™ System creates negative pressure at the apical foramen during root canal cleaning irrespective of the size of canal instrumentation. Positive apical pressures were measured for syringe irrigation. CLINICAL RELEVANCE: Negative pressure during irrigation contributes to improved safety as compared to high-positive pressure.
Subject(s)
Dental Pulp Cavity/drug effects , Root Canal Irrigants/administration & dosage , Therapeutic Irrigation/instrumentation , Equipment Design , Humans , In Vitro Techniques , Molar , Pressure , Syringes , Tooth ApexABSTRACT
BACKGROUND: To investigate the physical properties and the hydration behaviour of the fast-setting bioceramic iRoot FS Fast Set Root Repair Material (iRoot FS) and three other endodontic cements. METHODS: iRoot FS, Endosequence Root Repair Material Putty (ERRM Putty), gray and white mineral trioxide aggregate (G-MTA & W-MTA), and intermediate restorative material (IRM) were evaluated. The setting time was measured using ANSI/ADA standards. Microhardness was evaluated using the Vickers indentation test. Compressive strength and porosity were investigated at 7 and 28 days. Differential scanning calorimetry (DSC) was employed for the hydration test. RESULTS: iRoot FS had the shortest setting time of the four bioceramic cements (p < .001). The microhardness values of iRoot FS, ERRM Putty and MTA increased at different rates over the 28 days period. At day one, ERRM Putty had the lowest microhardness of the bioceramic cements (p < .001), but reached the same level as MTA at 4, 7 and 28 days. The microhardness of iRoot FS was lower than that of W-MTA at 7 and 28 days (p < .05). The porosity of the materials did not change after 7 days (p < .05). The compressive strength values at 28 days were significantly greater for all bioceramic groups compared to those at 7 days (p < .01). ERRM Putty had the highest compressive strength and the lowest porosity of the evaluated bioceramic cements (p < .05), followed by iRoot FS, W-MTA, and G-MTA, respectively. DSC showed that iRoot FS hydrated fastest, inducing an intense exothermic reaction. The ERRM Putty did not demonstrate a clear exothermic peak during the isothermal calorimetry test. CONCLUSIONS: iRoot FS had a faster setting time and hydrating process than the other bioceramic cements tested. The mechanical properties of iRoot FS, G-MTA and W-MTA were relatively similar.
Subject(s)
Ceramics/chemistry , Root Canal Filling Materials/chemistry , Aluminum Compounds/chemistry , Biocompatible Materials , Calcium Compounds/chemistry , Compressive Strength , Drug Combinations , Oxides/chemistry , Silicates/chemistryABSTRACT
PURPOSE: To investigate the effects of desensitizing agents on dentin tubule occlusion, acid and tooth brushing challenge, and microhardness change of human dentin. METHODS: Partially demineralized dentin slabs were divided into four groups (n = 30): (1) Control, (2) Non-desensitizing toothpaste, (3) Pro-Argin toothpaste, (4) CPP-ACP paste. The specimens were treated with these dentifrices for 2 minutes/day and soaked in artificial saliva (AS) for 24-hour remineralization. Then the dentin discs were divided into three subgroups for removal resistance tests: acid challenge, mechanical brushing challenge and blank control. Changes in dentin morphology were observed using scanning electron microscopy (SEM). Vickers microhardness measurements were performed at baseline and after 24-hour remineralization for all groups. RESULTS: A surface layer and intra-tubular crystals were observed in SEM imaging of Pro-Argin toothpaste and CPP-ACP paste groups, which occluded most of the dentin tubules for those specimens. But the dentin tubules were opened after the acid challenge again. Moreover, the dentin microhardness showed a slight increase after 24-hour AS immersion. The percentage microhardness gain (PMG) values of these two groups were 5.4% and 5.1% respectively, which were significantly higher than the other groups (P < 0.05).
Subject(s)
Dentin Desensitizing Agents/pharmacology , Dentin/drug effects , Toothbrushing/instrumentation , Arginine/pharmacology , Calcium Carbonate/pharmacology , Caseins/pharmacology , Citric Acid/adverse effects , Dentifrices/pharmacology , Dentin/ultrastructure , Edetic Acid/pharmacology , Fluorides/pharmacology , Hardness , Humans , Hydrogen-Ion Concentration , Materials Testing , Microscopy, Electron, Scanning , Phosphates/pharmacology , Saliva, Artificial/chemistry , Smear Layer , Time Factors , Tooth Demineralization/chemically induced , Tooth Remineralization , Toothpastes/pharmacologyABSTRACT
PURPOSE: To evaluate the effect of two in-office bleaching agents on the color changes of two ceromers (Ceramage and Adoro SR) and one direct composite resin (Gradia Direct Anterior) after staining by tea and coffee. MATERIALS AND METHODS: Twenty-four disk-shaped specimens were fabricated for each resin material and randomly divided into three groups (n = 8). The specimens were immersed in tea, coffee or deionized water, respectively, for 7 days. Each group was then equally divided into two sub-groups (n = 4), which were subjected to two in-office bleaching agents (BEYOND and Opalescence Boost), respectively. The color of the specimens was measured by a spectrophotometer at baseline, after staining and after bleaching. The color differences (ΔE values) between baseline and after treatments were calculated. RESULTS: Statistical analysis indicated that the staining solution had significant influence on the color change of resin composites tested (p < 0.001). The discolorations of resin composites were perceptible after immersing in tea or coffee solutions (ΔE>2.0). There was no statistically significant difference between BEYOND and Opalescence Boost in stains removal from discolored resins (p = 0.550). The color changes in ΔE value between baseline and after bleaching were less than 2.0 for all resin composite groups. CONCLUSIONS: Tea solution produces severe discoloration of three resin composites tested. The two in-office bleaching agents can effectively remove the stains from two ceromers and one direct composite resin tested in this study.
Subject(s)
Ceramics/chemistry , Composite Resins/chemistry , Dental Materials/chemistry , Tooth Bleaching Agents/chemistry , Coffee , Color , Drug Combinations , Humans , Light-Curing of Dental Adhesives , Materials Testing , Peroxides/chemistry , Polyvinyls/chemistry , Random Allocation , Silicates/chemistry , Spectrophotometry , Surface Properties , Tea , Urea/analogs & derivatives , Urea/chemistry , Zirconium/chemistryABSTRACT
OBJECTIVES: This study investigated the relationship between bacterial growth, viability, and extracellular polymeric substances (EPS) formation in biofilms, particularly regarding resistance development. It also examined the impact of chemical factors on the EPS matrix and bacterial proliferation in oral biofilms. METHODS: Three multi-species oral biofilms were incubated in anaerobic conditions. Three strains of Enterococcus faecalis were incubated in aerobic conditions. The incubation periods ranged from 0 h to 7 days for short-term biofilms, and from 3 to 90 days for long-term biofilms. Fluorescent labeling with carboxyfluorescein diacetate succinimidyl ester (CFSE) and flow cytometry were used to track EPS and bacterial growth. Confocal laser scanning microscopy (CLSM) assessed bacterial viability and EPS structure. Biofilms aged 7, 14, and 21 days were treated with 2 % chlorhexidine (CHX) and 1 % sodium hypochlorite (NaOCl) to evaluate their effects on EPS and bacterial proliferation. RESULTS: Short-term biofilms showed rapid bacterial proliferation and a gradual increase in EPS, maintaining stable viability. In the first two weeks, a significant rise in CFSE indicated growing maturity. From 14 to 90 days, EPS and CFSE levels stabilized. Following treatment, CHX significantly reduced bacterial proliferation, while NaOCl decreased EPS volume. CONCLUSIONS: Biofilm development involves a balance between bacterial proliferation and EPS production. The complexity of this process poses challenges in treating biofilm-associated infections, requiring strategies tailored to the biofilm's developmental stage. CLINICAL SIGNIFICANCE: For effective root canal treatment, it is imperative to focus on reducing bacterial proliferation during the early stages of oral infections. In contrast, strategies aimed at minimizing EPS production could be more beneficial for long-term management of these conditions.
Subject(s)
Biofilms , Extracellular Polymeric Substance Matrix , Fluoresceins , Succinimides , Chlorhexidine/pharmacology , Sodium Hypochlorite/pharmacology , Enterococcus faecalis , Microscopy, Confocal , Cell Proliferation , Root Canal Irrigants/pharmacologyABSTRACT
INTRODUCTION: In endodontic treatment, it is important to remove or inactivate biofilms in the root canal system. We investigated the effects of different concentrations and application times of sodium hypochlorite (NaOCl) on the viability of bacteria in ex vivo polymicrobial biofilms of different maturation levels. METHODS: Polymicrobial biofilms were prepared from dental plaque samples and grown for 1, 2, and 3 weeks under anaerobic conditions on collagen-coated hydroxyapatite discs as an ex vivo biofilm model. The biofilms were then exposed to NaOCl at concentrations ranging from 0.1% to 2% for 1 or 3 minutes. The control group was exposed to sterile distilled water. Viability staining was performed and examined by confocal laser scanning microscopy to determine the percentage of biofilm bacteria killed by NaOCl. Scanning electron microscopy was also performed to visually examine the biofilms. RESULTS: Application of NaOCl at 0.5%-2% for both 1 and 3 min killed significantly more bacteria when compared to the controls (P < .05). Cell viability tended to be lower after the application of NaOCl for 3 minutes than that for 1 minute. CONCLUSIONS: Our experiments using an ex vivo model showed that within the range of 0.1%-2% of NaOCl, higher NaOCl concentrations and longer application times were more effective in killing biofilm bacteria, and that mature biofilms were more resistant to NaOCl than younger biofilms.
Subject(s)
Biofilms , Sodium Hypochlorite , Sodium Hypochlorite/pharmacology , Biofilms/drug effects , Humans , Time Factors , Root Canal Irrigants/pharmacology , Microbial Viability/drug effects , Microscopy, Confocal , Dental Plaque/microbiology , Microscopy, Electron, ScanningABSTRACT
OBJECTIVES: To compare the tooth whitening efficacy, temperature and HP concentration changes induced by halogen light-activated and chemically activated in-office bleaching systems. MATERIALS AND METHODS: Twenty-four extracted premolars were randomly divided into two groups (n = 12): Group BL (35% HP with halogen light activation) and Group OP (38% HP with chemical activation). Tooth color was measured by a spectrophotometer according to the CIE L*a*b* color space system. Temperatures of bleaching gels and pulp chambers during the bleaching process were monitored and recorded by a digital multimeter with K-type thermocouple. HP concentrations were tested before and after treatments by iodometry. ANOVA and paired t-test were used for statistical analyses at the significance of p < 0.05. RESULTS: Tooth whitening resulted in the increase of ΔL* and ΔE and reduction of Δb*. Paired t-tests revealed groups BL had greater ΔE than group OP, however, there was no statistically significant difference in ΔE between them after 3 weeks post-treatment. Maximal temperature rise (ΔT) was found only in group BL, showing the increment of 2.55 and 2.02°C for bleaching gels and pulp chambers, respectively. HP concentrations were higher than baseline values for group OP (p < 0.001) rather than group BL. CONCLUSIONS: Halogen light and chemically activated in-office bleaching systems were both effective for tooth whitening, but halogen light activation could improve the immediate whitening effect. In contrast, chemical activation was a more conservative method due to the little temperature rise in pulp chambers.
Subject(s)
Halogens , Light , Tooth Bleaching/methods , In Vitro TechniquesABSTRACT
The continuous destruction of dental hard tissues increases the risk of bacterial invasion, which leads to pulp infections. Irrigation is critical for successful root canal treatment in terms of infection control. However, no single irrigant covers all of the functions demanded, including antibiofilm and tissue-dissolving activities. The aim of this study was to investigate the antimicrobial properties of Triton, an all-in-one irrigant, on Enterococcus faecalis and multispecies oral biofilms in dentin canals, as well as its ability to remove the smear layer. Dentin blocks (192 specimens) were prepared from single-root human teeth and then assigned to 48 groups (24 groups for each biofilm type). Serial centrifugation was used for bacterial introduction into dentinal tubules. After 3 weeks, half of the specimens were created a uniform smear layer. The following treatments were applied: short time (separate): Triton, 6% NaOCl, 2% NaOCl, and water (all for 3 min); short time (combined): Triton (3 + 1 min), 6% NaOCl +17% EDTA (3 + 1 or 2 + 1 min), and 2% NaOCl +17% EDTA (3 + 1 min); and long time: Triton (3 + 3 min), 6% NaOCl (5 min), 6% NaOCl +17% EDTA (5 + 1 min), and water (3 + 3 min). Confocal laser scanning microscopy and scanning electron microscopy were employed to examine the antimicrobial activity and smear layer removal, respectively. The results revealed that despite the absence or presence of the smear layer, Triton (3 + 3 min) showed the highest killing for both tested biofilms (61.53%-72.22%) among all groups (p < 0.05). Furthermore, the smear layer was removed by Triton after 3 + 3 min, exposing open dentin canals. These findings demonstrated that Triton can provide dual benefits of antibiofilm and smear layer removal capabilities simultaneously, indicating a simplified and effective strategy for application in root canal treatment.
ABSTRACT
Introduction: Clear aligners, while offering a more hygienic alternative to fixed appliances, are still associated with challenges including plaque accumulation and enamel demineralization. The aim of the present study was to investigate the antibiofilm and remineralization effectiveness of innovative flowable composite attachments containing bioceramic micro-fillers. Methods: Four experimental attachments were formulated and bonded to human enamel specimens: 3M Filtek Supreme flowable composite (Filtek SF) + 10% bioactive glass 45S5 (BAG), Filtek SF + 30% BAG, Filtek SF + 10% Bredigite (BRT), Filtek SF + 30% BRT. Plaque biofilms were grown on the bonded enamel using a standardized protocol and the biofilm-killing effect was assessed by confocal laser scanning microscopy and scanning electron microscopy. Vickers microhardness was measured to evaluate the remineralization effect of the attachments containing bioceramic fillers after acid challenge. Shear bond test was performed to assess the bonding strength. Results: Attachments with bioceramic fillers significantly inhibited plaque biofilm growth in 3 weeks on enamel, contributing over 20% bacterial cell killing in 10% filler groups and over 30% killing in 30% filler groups. All four experimental groups demonstrated significantly higher microhardness values than the control group without fillers on the attachment side. The shear bonding strength was not compromised in the attachments with micro-fillers. Discussion: Proper incorporation of bioceramic micro-fillers in attachments provides an innovative approach for clear aligner therapy with reinforced antibiofilm and remineralization effects without weakening shear bonding strength.