ABSTRACT
Within the family of two-dimensional dielectrics, rhombohedral boron nitride (rBN) is considerably promising owing to having not only the superior properties of hexagonal boron nitride1-4-including low permittivity and dissipation, strong electrical insulation, good chemical stability, high thermal conductivity and atomic flatness without dangling bonds-but also useful optical nonlinearity and interfacial ferroelectricity originating from the broken in-plane and out-of-plane centrosymmetry5-23. However, the preparation of large-sized single-crystal rBN layers remains a challenge24-26, owing to the requisite unprecedented growth controls to coordinate the lattice orientation of each layer and the sliding vector of every interface. Here we report a facile methodology using bevel-edge epitaxy to prepare centimetre-sized single-crystal rBN layers with exact interlayer ABC stacking on a vicinal nickel surface. We realized successful accurate fabrication over a single-crystal nickel substrate with bunched step edges of the terrace facet (100) at the bevel facet (110), which simultaneously guided the consistent boron-nitrogen bond orientation in each BN layer and the rhombohedral stacking of BN layers via nucleation near each bevel facet. The pure rhombohedral phase of the as-grown BN layers was verified, and consequently showed robust, homogeneous and switchable ferroelectricity with a high Curie temperature. Our work provides an effective route for accurate stacking-controlled growth of single-crystal two-dimensional layers and presents a foundation for applicable multifunctional devices based on stacked two-dimensional materials.
ABSTRACT
Increased levels of proteases, such as trypsin, in the distal intestine have been implicated in intestinal pathological conditions1-3. However, the players and mechanisms that underlie protease regulation in the intestinal lumen have remained unclear. Here we show that Paraprevotella strains isolated from the faecal microbiome of healthy human donors are potent trypsin-degrading commensals. Mechanistically, Paraprevotella recruit trypsin to the bacterial surface through type IX secretion system-dependent polysaccharide-anchoring proteins to promote trypsin autolysis. Paraprevotella colonization protects IgA from trypsin degradation and enhances the effectiveness of oral vaccines against Citrobacter rodentium. Moreover, Paraprevotella colonization inhibits lethal infection with murine hepatitis virus-2, a mouse coronavirus that is dependent on trypsin and trypsin-like proteases for entry into host cells4,5. Consistently, carriage of putative genes involved in trypsin degradation in the gut microbiome was associated with reduced severity of diarrhoea in patients with SARS-CoV-2 infection. Thus, trypsin-degrading commensal colonization may contribute to the maintenance of intestinal homeostasis and protection from pathogen infection.
Subject(s)
Gastrointestinal Microbiome , Intestine, Large , Symbiosis , Trypsin , Administration, Oral , Animals , Bacterial Secretion Systems , Bacterial Vaccines/administration & dosage , Bacterial Vaccines/immunology , Bacteroidetes/isolation & purification , Bacteroidetes/metabolism , COVID-19/complications , Citrobacter rodentium/immunology , Diarrhea/complications , Feces/microbiology , Gastrointestinal Microbiome/genetics , Humans , Immunoglobulin A/metabolism , Intestine, Large/metabolism , Intestine, Large/microbiology , Mice , Murine hepatitis virus/metabolism , Murine hepatitis virus/pathogenicity , Proteolysis , SARS-CoV-2/pathogenicity , Trypsin/metabolism , Virus InternalizationABSTRACT
The production of large single-crystal metal foils with various facet indices has long been a pursuit in materials science owing to their potential applications in crystal epitaxy, catalysis, electronics and thermal engineering1-5. For a given metal, there are only three sets of low-index facets ({100}, {110} and {111}). In comparison, high-index facets are in principle infinite and could afford richer surface structures and properties. However, the controlled preparation of single-crystal foils with high-index facets is challenging, because they are neither thermodynamically6,7 nor kinetically3 favourable compared to low-index facets6-18. Here we report a seeded growth technique for building a library of single-crystal copper foils with sizes of about 30 × 20 square centimetres and more than 30 kinds of facet. A mild pre-oxidation of polycrystalline copper foils, followed by annealing in a reducing atmosphere, leads to the growth of high-index copper facets that cover almost the entire foil and have the potential of growing to lengths of several metres. The creation of oxide surface layers on our foils means that surface energy minimization is not a key determinant of facet selection for growth, as is usually the case. Instead, facet selection is dictated randomly by the facet of the largest grain (irrespective of its surface energy), which consumes smaller grains and eliminates grain boundaries. Our high-index foils can be used as seeds for the growth of other Cu foils along either the in-plane or the out-of-plane direction. We show that this technique is also applicable to the growth of high-index single-crystal nickel foils, and we explore the possibility of using our high-index copper foils as substrates for the epitaxial growth of two-dimensional materials. Other applications are expected in selective catalysis, low-impedance electrical conduction and heat dissipation.
ABSTRACT
The properties of two-dimensional (2D) van der Waals materials can be tuned through nanostructuring or controlled layer stacking, where interlayer hybridization induces exotic electronic states and transport phenomena. Here we describe a viable approach and underlying mechanism for the assisted self-assembly of twisted layer graphene. The process, which can be implemented in standard chemical vapour deposition growth, is best described by analogy to origami and kirigami with paper. It involves the controlled induction of wrinkle formation in single-layer graphene with subsequent wrinkle folding, tearing and re-growth. Inherent to the process is the formation of intertwined graphene spirals and conversion of the chiral angle of 1D wrinkles into a 2D twist angle of a 3D superlattice. The approach can be extended to other foldable 2D materials and facilitates the production of miniaturized electronic components, including capacitors, resistors, inductors and superconductors.
ABSTRACT
The development of two-dimensional (2D) materials has opened up possibilities for their application in electronics, optoelectronics and photovoltaics, because they can provide devices with smaller size, higher speed and additional functionalities compared with conventional silicon-based devices1. The ability to grow large, high-quality single crystals for 2D components-that is, conductors, semiconductors and insulators-is essential for the industrial application of 2D devices2-4. Atom-layered hexagonal boron nitride (hBN), with its excellent stability, flat surface and large bandgap, has been reported to be the best 2D insulator5-12. However, the size of 2D hBN single crystals is typically limited to less than one millimetre13-18, mainly because of difficulties in the growth of such crystals; these include excessive nucleation, which precludes growth from a single nucleus to large single crystals, and the threefold symmetry of the hBN lattice, which leads to antiparallel domains and twin boundaries on most substrates19. Here we report the epitaxial growth of a 100-square-centimetre single-crystal hBN monolayer on a low-symmetry Cu (110) vicinal surface, obtained by annealing an industrial copper foil. Structural characterizations and theoretical calculations indicate that epitaxial growth was achieved by the coupling of Cu <211> step edges with hBN zigzag edges, which breaks the equivalence of antiparallel hBN domains, enabling unidirectional domain alignment better than 99 per cent. The growth kinetics, unidirectional alignment and seamless stitching of the hBN domains are unambiguously demonstrated using centimetre- to atomic-scale characterization techniques. Our findings are expected to facilitate the wide application of 2D devices and lead to the epitaxial growth of broad non-centrosymmetric 2D materials, such as various transition-metal dichalcogenides20-23, to produce large single crystals.
ABSTRACT
In this Letter, we theoretically explore the physical properties of a new type of three-dimensional graphite moiré superlattice, the bulk alternating twisted graphite (ATG) system with homogeneous twist angle, which is grown by in situ chemical vapor decomposition method. Compared to twisted bilayer graphene (TBG), the bulk ATG system is bestowed with an additional wave vector degree of freedom due to the extra dimensionality. As a result, when the twist angle of bulk ATG is smaller than twice of the magic angle of TBG, there always exist "magic momenta" which host topological flat bands with vanishing in-plane Fermi velocities. Most saliently, when the twist angle is relatively large, a dispersionless three-dimensional zeroth Landau level would emerge in the bulk ATG, which may give rise to robust three-dimensional quantum Hall effects and unusual quantum-Hall physics over a large range of twist angles.
ABSTRACT
Pulchinenoside B4, a natural saponin monomer from the Pulsatilla plant, plays an important role as an immunomodulator in the treatment of acute inflammation. Oral ulcer (OU) is a common ulcerative injury disease that occurs in the oral mucosa, including mucosal ulceration and abnormalities of lips and tongue. A close correlation exists between gut microbiota and circulating metabolites in patients with OU. However, the correlation between gut microbiota and serum metabolomics is not clear. Therefore, this study aimed to explore the changes in gut microbiota and metabolites in OU. The 16S ribosomal RNA (16S rRNA) gene sequencing was used to detect the changes in the composition of gut microbiota in OU rat model. Moreover, the endogenous small metabolites were explored by collecting the non-targeted serum metabolomics data. A total of 34 OU-related biomarkers were identified, mainly related to fatty acid metabolism and inflammatory pathways. The administration of B4 effectively reduced the occurrence of OU and restored the levels of multiple endogenous biomarkers and key gut microbial species to the normal level. This study demonstrated that the gut microbiota and metabolites were altered in the OU rat model, which were significantly restored to the normal level by B4, thereby showing good application prospects in the treatment of OU. KEY POINTS: ⢠The first investigating the correlation between OU and gut microbiota. ⢠A close correlation between metabolites and gut microbiota in OU disease was successfully identified. ⢠Pulchinenoside B4 ameliorates oral ulcers in rats by modulating gut microbiota and metabolites.
Subject(s)
Gastrointestinal Microbiome , Oral Ulcer , Humans , Animals , Rats , RNA, Ribosomal, 16S/genetics , Mouth Mucosa , BiomarkersABSTRACT
Understanding the atomistic mechanisms of non-equilibrium processes during solid-state synthesis, such as nucleation and grain structure formation of a layered oxide phase, is a critical challenge for developing promising cathode materials such as Ni-rich layered oxide for Li-ion batteries. In this study, we found that the aluminum oxide coating layer transforms into lithium aluminate as an intermediate, which has favorable low interfacial energies with the layered oxide to promote the nucleation of the latter. The fast and uniform nucleation and formation of the layered oxide phase at relatively low temperatures were evidenced using solid-state nuclear magnetic resonance and in situ synchrotron X-ray diffraction. The resulting Ni-rich layered oxide cathode has fine primary particles, as visualized by three-dimensional tomography constructed using a focused-ion beam and scanning electron microscopy. The densely packed fine primary particles enable the excellent mechanical strength of the secondary particles, as demonstrated by in situ compression tests. This strategy provides a new approach for developing next-generation, high-strength battery materials.
ABSTRACT
Amino acids are the building blocks of proteins and are widely used as important ingredients for other nitrogen-containing molecules. Here, we report the sustainable production of amino acids from biomass-derived hydroxy acids with high activity under visible-light irradiation and mild conditions, using atomic ruthenium-promoted cadmium sulfide (Ru1/CdS). On a metal basis, the optimized Ru1/CdS exhibits a maximal alanine formation rate of 26.0â molAla â gRu -1 â h-1, which is 1.7â times and more than two orders of magnitude higher than that of its nanoparticle counterpart and the conventional thermocatalytic process, respectively. Integrated spectroscopic analysis and density functional theory calculations attribute the high performance of Ru1/CdS to the facilitated charge separation and O-H bond dissociation of the α-hydroxy group, here of lactic acid. The operando nuclear magnetic resonance further infers a unique "double activation" mechanism of both the CH-OH and CH3-CH-OH structures in lactic acid, which significantly accelerates its photocatalytic amination toward alanine.
Subject(s)
Amino Acids , Biomass , Cadmium Compounds , Ruthenium , Sulfides , Sulfides/chemistry , Ruthenium/chemistry , Cadmium Compounds/chemistry , Catalysis , Amino Acids/chemistry , Photochemical Processes , Density Functional Theory , LightABSTRACT
The production of large-area twisted bilayer graphene (TBG) with controllable angles is a prerequisite for proceeding with its massive applications. However, most of the prevailing strategies to fabricate twisted bilayers face great challenges, where the transfer methods are easily stuck by interfacial contamination, and direct growth methods lack the flexibility in twist-angle design. Here we develop an effective strategy to grow centimetre-scale TBG with arbitrary twist angles (accuracy, <1.0°). The success in accurate angle control is realized by an angle replication from two prerotated single-crystal Cu(111) foils to form a Cu/TBG/Cu sandwich structure, from which the TBG can be isolated by a custom-developed equipotential surface etching process. The accuracy and consistency of the twist angles are unambiguously illustrated by comprehensive characterization techniques, namely, optical spectroscopy, electron microscopy, photoemission spectroscopy and photocurrent spectroscopy. Our work opens an accessible avenue for the designed growth of large-scale two-dimensional twisted bilayers and thus lays the material foundation for the future applications of twistronics at the integration level.
ABSTRACT
Confined nanospaces provide a new platform to promote catalytic reactions. However, the mechanism of catalytic enhancement in the nanospace still requires insightful exploration due to the lack of direct visualization. Here, we report operando investigations on the etching and growth of graphene in a two-dimensional (2D) confined space between graphene and a Cu substrate. We observed that the graphene layer between the Cu and top graphene layer was surprisingly very active in etching (more than 10 times faster than the etching of the top graphene layer). More strikingly, at a relatively low temperature (â¼530 °C), the etched carbon radicals dissociated from the bottom layer, in turn feeding the growth of the top graphene layer with a very high efficiency. Our findings reveal the in situ dynamics of the anomalous confined catalytic processes in 2D confined spaces and thus pave the way for the design of high-efficiency catalysts.
ABSTRACT
Metal-organic framework catalysts bring new opportunities for CO2 electrocatalysis. Herein, we first conduct density-functional theory calculations and predict that Co-based porphyrin porous organic layers (Co-PPOLs) exhibit good activity for CO2 conversion because of the low *CO adsorption energy at Co-N4 sites, which facilitates *CO desorption and CO formation. Then, we prepare two-dimensional Co-PPOLs with exclusive Co-N4 sites through a facile surfactant-assisted bottom-up method. The ultrathin feature ensures the exposure of catalytic centers. Together with large specific area, high electrical conductivity and CO2 adsorption capability, Co-PPOLs achieve a peak faradaic efficiency for CO production (FECO =94.2 %) at a moderate potential in CO2 electroreduction, accompanied with good stability. Moreover, Co-PPOLs reach an industrial-level current above 200â mA in a membrane electrode assembly reactor, and maintain near-unity CO selectivity (FECO >90 %) over 20â h in CO2 electrolysis.
ABSTRACT
Reported herein is a visible-light-induced, catalyst-free intramolecular cyclization of 4-phenylsulfonyl-2,3,5,6-tetrachloropyridine, leading to rapid assembly of a series of unprecedented benzo[4,5]thieno[3,2-c]pyridine 5,5-dioxide scaffolds under mild conditions. The rational introduction of a perchloropyridin-4-yl module significantly facilitated this photoinduced process and offers a versatile platform for broad structural variation. Mechanistic studies revealed that a newly identified charge-transfer complex with carbonate is crucial to this photoinduced process.
ABSTRACT
Data regarding the epidemiologic characteristics and clinical features of pediatric hematologic patients are limited in this corona virus disease 2019 (COVID-19) crisis. We investigated the status of 113 pediatric hematologic patients in Wuhan union hospital during the COVID-19 pandemic from January 23 to March 10, 2020. All the patients had routine blood and biochemical examination, as well as chest computed tomography scans, and the nucleic acid, immunoglobulin G-immunoglobulin M combined antibodies tests for SARS-CoV-2. After admission, all patients were single-room isolated for 5 to 7 days. The results showed that only 1 (0.88%) child with leukemia was confirmed to have SARS-CoV-2 infection and 15 (13.2%) children were considered as suspected cases. Comparing to the nonsuspected patients, the suspected cases had lower white blood cell count, hemoglobin level, neutrophil count, serum calcium ion level and serum albumin concentration, as well as higher levels of C-reactive protein. All the suspected cases were ruled out of SARS-CoV-2 infection by twice negative tests for the virus. Therefore, the incidence of SARS-CoV-2 infection in hematologic malignancy children was low during the COVID-19 pandemic in China. COVID-19 got early detected and the virus spread out in the ward was effectively blocked by increasing test frequency and using single-room isolation for 5 to 7 days after admission.
Subject(s)
COVID-19/complications , Hematologic Neoplasms/complications , Adolescent , COVID-19/blood , COVID-19/diagnosis , COVID-19/epidemiology , Child , Child, Preschool , China/epidemiology , Hematologic Neoplasms/blood , Hospitalization , Humans , Incidence , Infant , Leukemia/blood , Leukemia/complications , Leukocyte Count , Male , Retrospective Studies , SARS-CoV-2/isolation & purificationABSTRACT
A metal-free photosensitized protocol for regioselective diamination of alkene feedstocks over a single step was developed based on the rationally designed bifunctional diamination reagent, thus affording a range of differentially protected 1,2-diamines in moderate to high yields. Mechanistic studies reveal that the reaction is initiated with a triplet-triplet energy transfer between thioxanthone catalyst and diamination reagent, followed by fragmentation to simultaneously generate long-lived iminyl radical and transient amidyl radical. The excellent regioselectivity presumably stems from the large reactivity difference between two different N-centered radical species. This protocol is characterized by excellent regioselectivity, broad functional group tolerance, and mild reaction conditions, which would enrich the diversity and versatility of facilitate the diversity-oriented synthesis of 1,2-diamine-containing complex molecule scaffolds.
ABSTRACT
The poor stability, in particular with respect to temperature, moisture, and light exposure, remains a ubiquitous impediment virtually for metal halide perovskite materials and devices in their future practical application. Herein, from the perspective of precursor solution chemistry, ionic liquid solvent methylammonium acetate (MAAc) is introduced to prepare high-quality MAPbBr3 perovskite thin films in a one-step air-processing process without anti-solvent treatment. Due to formation of pinhole-free, uniform, and compact MAPbBr3 perovskite film, excellent amplified spontaneous emission (ASE) with high emission efficiency and low threshold is obtained under nanosecond laser. Furthermore, the prepared MAPbBr3 perovskite exhibits excellent two-photon induced ASE with a low threshold of 100 µJ cm-2 under 800 nm femtosecond laser excitation. More importantly, in comparison with the traditional MAPbBr3 films prepared with N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO), the MAPbBr3 film prepared with MAAc shows excellent optical stability: no signs of degradation under more than 2 h pulsed laser excitation, stable ASE emission spectra under the humidity of 95% and ASE spectra can be stimulated when films are kept in air for more than 6000 h without encapsulation.
ABSTRACT
Although many studies have investigated the spatial scaling of microbial communities living in surface soils, very little is known about the patterns within deeper strata, nor is the mechanism behind them. Here, we systematically assessed spatial scaling of prokaryotic biodiversity within three different strata (Upper: 0-20 cm, Middle: 20-40 cm, and Substratum: 40-100 cm) in a typical grassland by examining both distance-decay (DDRs) and species-area relationships (SARs), taxonomically and phylogenetically, as well as community assembly processes. Each layer exhibited significant biogeographic patterns in both DDR and SAR (p < .05), with taxonomic turnover rates higher than phylogenetic ones. Specifically, the spatial turnover rates, ß and z values, respectively, ranged from 0.016 ± 0.005 to 0.023 ± 0.005 and 0.065 ± 0.002 to 0.077 ± 0.004 across soil strata, and both increased with depth. Moreover, the prokaryotic community in grassland soils assembled mainly according to deterministic rather than stochastic mechanisms. By using normalized stochasticity ratio (NST) based on null model, the relative importance of deterministic ratios increased from 48.0 to 63.3% from Upper to Substratum, meanwhile a phylogenetic based method revealed average ßNTI also increased with depth, from -5.29 to 19.5. Using variation partitioning and distance approaches, both geographic distance and soil properties were found to strongly affect biodiversity structure, the proportions increasing with depth, but spatial distance was always the main underlying factor. These indicated increasingly deterministic proportions in accelerating turnover rates for spatial assembly of prokaryotic biodiversity. Our study provided new insights on biogeography in different strata, revealing importance of assembly patterns and mechanisms of prokaryote communities in below-surface soils.
Subject(s)
Biodiversity , Microbiota , Microbiota/genetics , Phylogeny , Soil , Soil MicrobiologyABSTRACT
A visible-light-promoted olefinic C-H trifluoromethylation of enamides was developed by employing cheap and stable Langlois' reagent as the CF3 source. A series of ß-CF3 enamides were obtained in moderate to good yields with high E-isomer selectivity under mild conditions. Preliminary mechanistic studies suggest that molecular oxygen acts as the terminal oxidant for this net oxidative process, and the E isomer selectivity could be well explained by a base-assisted deprotonation of the cation intermediate.
ABSTRACT
The spread of antibiotic resistance genes (ARGs) has gained much attention worldwide, while the contribution of vertical gene transfer (VGT) and horizontal gene transfer (HGT) is still elusive. Here, we improved an emerging high-throughput single-cell-based technology, emulsion, paired isolation, and concatenation polymerase chain reaction (epicPCR), by lengthening the sequence of ARG in the fused ARG-16S rRNA fragments to cover the variance of both ARG and its hosts. The improved epicPCR was applied to track the hosts of a widely detected ARG, sul1 gene, in five urban wastewater treatment plants (UWTPs) during two seasons. The sul1 host bacteria were highly diverse and mostly classified as Proteobacteria and Bacteroidetes. Clear seasonal divergence of α-diversity and interaction networks were present in the host community. The consensus phylogenetic trees of the sul1 gene and their host demonstrated incorrespondence on the whole and regularity on abundant groups, suggesting the important role of both HGT and VGT, respectively. The relative importance of these two ways was further measured; HGT (54%) generally played an equal or even more important role as VGT (46%) in UWTPs. The application of the improved epicPCR technology provides a feasible approach to quantify the relative contributions of VGT and HGT in environmental dissemination of ARGs.
Subject(s)
Gene Transfer, Horizontal , Water Purification , Anti-Bacterial Agents/pharmacology , Drug Resistance, Microbial/genetics , Phylogeny , RNA, Ribosomal, 16S/genetics , TechnologyABSTRACT
In the context of fashion/textile innovations towards Industry 4.0, a variety of digital technologies, such as 3D garment CAD, have been proposed to automate, optimize design and manufacturing processes in the organizations of involved enterprises and supply chains as well as services such as marketing and sales. However, the current digital solutions rarely deal with key elements used in the fashion industry, including professional knowledge, as well as fashion and functional requirements of the customer and their relations with product technical parameters. Especially, product design plays an essential role in the whole fashion supply chain and should be paid more attention to in the process of digitalization and intelligentization of fashion companies. In this context, we originally developed an interactive fashion and garment design system by systematically integrating a number of data-driven services of garment design recommendation, 3D virtual garment fitting visualization, design knowledge base, and design parameters adjustment. This system enables close interactions between the designer, consumer, and manufacturer around the virtual product corresponding to each design solution. In this way, the complexity of the product design process can drastically be reduced by directly integrating the consumer's perception and professional designer's knowledge into the garment computer-aided design (CAD) environment. Furthermore, for a specific consumer profile, the related computations (design solution recommendation and design parameters adjustment) are performed by using a number of intelligent algorithms (BIRCH, adaptive Random Forest algorithms, and association mining) and matching with a formalized design knowledge base. The proposed interactive design system has been implemented and then exposed through the REST API, for designing garments meeting the consumer's personalized fashion requirements by repeatedly running the cycle of design recommendation-virtual garment fitting-online evaluation of designer and consumer-design parameters adjustment-design knowledge base creation, and updating. The effectiveness of the proposed system has been validated through a business case of personalized men's shirt design.