ABSTRACT
BACKGROUND: Despite concerns about worsening pregnancy outcomes resulting from healthcare restrictions, economic difficulties and increased stress during the COVID-19 pandemic, preterm birth (PTB) rates declined in some countries in 2020, while stillbirth rates appeared stable. Like other shocks, the pandemic may have exacerbated existing socioeconomic disparities in pregnancy, but this remains to be established. Our objective was to investigate changes in PTB and stillbirth by socioeconomic status (SES) in European countries. METHODS: The Euro-Peristat network implemented this study within the Population Health Information Research Infrastructure (PHIRI) project. A common data model was developed to collect aggregated tables from routine birth data for 2015-2020. SES was based on mother's educational level or area-level deprivation/maternal occupation if education was unavailable and harmonized into low, medium and high SES. Country-specific relative risks (RRs) of PTB and stillbirth for March to December 2020, adjusted for linear trends from 2015 to 2019, by SES group were pooled using random effects meta-analysis. RESULTS: Twenty-one countries provided data on perinatal outcomes by SES. PTB declined by an average 4% in 2020 {pooled RR: 0.96 [95% confidence intervals (CIs): 0.94-0.97]} with similar estimates across all SES groups. Stillbirths rose by 5% [RR: 1.05 (95% CI: 0.99-1.10)], with increases of between 3 and 6% across the three SES groups, with overlapping confidence limits. CONCLUSIONS: PTB decreases were similar regardless of SES group, while stillbirth rates rose without marked differences between groups.
Subject(s)
COVID-19 , Premature Birth , SARS-CoV-2 , Stillbirth , Humans , Stillbirth/epidemiology , COVID-19/epidemiology , Europe/epidemiology , Premature Birth/epidemiology , Female , Pregnancy , Adult , Socioeconomic Factors , Pandemics , Social Class , Health Status Disparities , Infant, Newborn , Pregnancy Outcome/epidemiology , Socioeconomic Disparities in HealthABSTRACT
BACKGROUND: Stillbirth is a major public health problem, but measurement remains a challenge even in high-income countries. We compared routine stillbirth statistics in Europe reported by Eurostat with data from the Euro-Peristat research network. METHODS: We used data on stillbirths in 2015 from both sources for 31 European countries. Stillbirth rates per 1000 total births were analyzed by gestational age (GA) and birthweight groups. Information on termination of pregnancy at ≥22 weeks' GA was analyzed separately. RESULTS: Routinely collected stillbirth rates were higher than those reported by the research network. For stillbirths with a birthweight ≥500 g, the difference between the mean rates of the countries for Eurostat and Euro-Peristat data was 22% [4.4/1000, versus 3.5/1000, mean difference 0.9 with 95% confidence interval (CI) 0.8-1.0]. When using a birthweight threshold of 1000 g, this difference was smaller, 12% (2.9/1000, versus 2.5/1000, mean difference 0.4 with 95% CI 0.3-0.5), but substantial differences remained for individual countries. In Euro-Peristat, missing data on birthweight ranged from 0% to 29% (average 5.0%) and were higher than missing data for GA (0-23%, average 1.8%). CONCLUSIONS: Routine stillbirth data for European countries in international databases are not comparable and should not be used for benchmarking or surveillance without careful verification with other sources. Recommendations for improvement include using a cut-off based on GA, excluding late terminations of pregnancy and linking multiple sources to improve the quality of national databases.
Subject(s)
Income , Stillbirth , Birth Weight , Europe/epidemiology , Female , Gestational Age , Humans , Pregnancy , Stillbirth/epidemiologyABSTRACT
Cisplatin ( cis-diaminedichloroplatinum(II), CDDP) plays a crucial role in the treatment of various malignant tumors. However, its clinical efficacy and applicability are restricted by issues of toxicity and resistance. Here, for drug delivery purposes, the outer surface of MCM-41 mesoporous silica nanoparticles (MSNs) was functionalized with poly(ethylene glycol) ( Mw = 10 000 g/mol) or low-molecular-weight ( Mw = 1800 g/mol) branched polyethyleneimine (PEI). Given the strong affinity of sulfur for platinum, thiol-functionalized MSNs were synthesized for comparison by co-condensation with (3-mercaptopropyl)triethoxysilane. CDDP loading was performed either by adsorption or impregnation in aqueous media without the use of dimethyl sulfoxide as a solubilizer. CDDP loading capacities obtained by impregnation were higher than those obtained by adsorption and varied from 3.9 to 16.1 wt %, depending on the functional group. Loaded nanomaterials were characterized by scanning electron microscopy, scanning transmission electron microscopy-high-angle annular dark-field, and Raman spectroscopy. Depending on the functional groups, platinum-based species were either dispersed in the nanomaterials as nanocrystals or uniformly distributed as molecular species. The spectral signature of CDDP was strongly modified when platinum species were homogeneously distributed within the nanomaterials. Preliminary drug release studies performed at 37 °C showed that the behavior of CDDP-loaded MSNs strongly depends on the nature of the present functional groups. Among the functionalization routes investigated in this paper, PEI-based functionalization showed the most promising results for further applications in controlled drug release with the absence of burst release and a sustained release over 72 h.
Subject(s)
Antineoplastic Agents/chemistry , Cisplatin/chemistry , Nanoparticles/chemistry , Silicon Dioxide/chemistry , Molecular Structure , Particle Size , Porosity , Surface PropertiesABSTRACT
The zwitterionic bipyridinium carboxylate ligand 1,1'-bis(4-carboxyphenyl)-4,4'-bipyridinium (pc1) in the presence of cadmium chloride affords novel porous coordination polymers (PCPs): [Cd4(pc1)3Cl6]·CdCl4·guest (1) crystallizing in the P3Ì 1c space group. In the structure, [Cd4Cl6(CO2)6] building units are linked together by six pc1 ligands, leading to a 3D high-symmetrical network exhibiting hexagonal channels along the c axis. The walls of this PCP consist of cationic electron-acceptor bipyridinium units. The PCP 1 reversibly adsorbs H2O and CH3OH up to about 0.1 g/g at saturation showing the adsorption isotherms characteristic of a moderately hydrophilic sorbent. Adsorption of ammonia (NH3) follows a different pattern, reaching an exceptional uptake of 0.39 g/g (22.3 mmol/g) after the first adsorption cycle. Although the crystalline structure of 1 collapses after the first adsorption, the solid can be regenerated and maintains the capacity of 0.29 g/g (17 mmol/g) in the following cycles. We found that the high NH3 uptake is due to a combination of pore filling taking place below 150 h·Pa and chemisorption occurring at higher pressures. The latter process was shown to involve two phenomena: (i) coordination of NH3 molecules to Cd(2+) cations as follows from (113)Cd NMR and (ii) strong donor-acceptor interactions between NH3 molecules and pc1 ligands.
ABSTRACT
The zwitterionic bipyridinium carboxylate ligand 1-(4-carboxyphenyl)-4,4'-bipyridinium (hpc1) in the presence of 1,4-benzenedicarboxylate anions (BDC(2-)) and Zn(2+) ions affords three porous coordination polymers (PCPs): [Zn5(hpc1)2(BDC)4(HCO2)2]·2DMF·EtOH·H2O (1), [Zn3(hpc1)(BDC)2(HCO2)(OH)(H2O)]·DMF·EtOH·H2O (2), and [Zn10(hpc1)4(BDC)7(HCO2)2(OH)4(EtOH)2]·3DMF·3H2O (3), with the formate anions resulting from the in situ decomposition of dimethylformamide (DMF) solvent molecules. 1 and 3 are photo- and thermochromic, turning dark green as a result of the formation of bipyridinium radicals, as shown by electron paramagnetic resonance measurements. Particularly, crystals of 3 are very photosensitive, giving an eye-detectable color change upon exposure to the light of the microscope in air within 1-2 min. A very nice and interesting feature is the regular discoloration of crystals from the "edge" to the "core" upon exposition to O2 (reoxidation of organic radicals) due to the diffusion of O2 inside the pores, with this discoloration being slower in an oxygen-poor atmosphere. The formation of organic radicals is explained by an electron transfer from the oxygen atoms of the carboxylate groups to pyridinium cycles. In the structure of 3', [Zn10(hpc1)4(BDC)7(OH)6(H2O)2], resulting from the heating of sample 3 (desolvation and loss of CO molecules due to the decomposition of formate anions), no suitable donor-acceptor interaction is present, and as a consequence, this compound does not exhibit any chromic properties. The presence of permanent porosity in desolvated 1, 2, and 3' is confirmed by methanol adsorption at 25 °C with the adsorbed amount reaching 5 wt % for 1, 10 wt % for 3', and 13 wt % for 2. The incomplete desorption of methanol at 25 °C under vacuum points to strong host-guest interactions.
ABSTRACT
Hydrogen-bond assembly of tripod-like organic cations [H3 -MeTrip](3+) (1,2,3-tri(4'-pyridinium-oxyl)-2-methylpropane) and the hexa-anionic complex [Zr2 (oxalate)7 ](6-) leads to a structurally, thermally, and chemically robust porous 3D supramolecular framework showing channels of 1â nm in width. Permanent porosity has been ascertained by analyzing the material at the single-crystal level during a sorption cycle. The framework crystal structure was found to remain the same for the native compound, its activated phase, and after guest resorption. The channels exhibit affinities for polar organic molecules ranging from simple alcohols to aniline. Halogenated molecules and I2 are also taken up from hexane solutions by this unique supramolecular framework.
ABSTRACT
Water confinement in the hydrophobic nanopores of highly siliceous zeolite having MFI and CHA topology is investigated by high pressure manometry coupled to differential calorimetry. Surprisingly, the intrusion of water is endothermic for MFI but exothermic for CHA. This phase transition depends on the geometry of the environment in which water is confined: channels (MFI) or cavities (CHA). The energy of intrusion is mainly governed by the change in the coordination of water molecules when they are forced to enter the nanopores and to adopt a weaker, hydrogen-bonded structure. At such a nanoscale, the properties of the molecules are governed strongly by geometrical restraints. This implies that the use of classical macroscopic equations such as Laplace-Washburn will have limitations at the molecular level.
ABSTRACT
Carbonyl compounds are ubiquitous quality trackers that provide information about food product degradation as well as air and water pollution levels. In addition, they are used as biomarkers for medical diagnoses. With more user-friendly sensors, their fast detection and easy quantification are highly relevant. The synthesis, characterization, and performance assessment of a new sensor based on aniline fluorescence to monitor carbonyls in real time is reported. A cost-effective synthesis using a straightforward sol-gel process led to the construction of a nontoxic silica-based material with high porosity, which can be used with almost no sample preparation. The material exhibits a rapid (< 1 min) fluorescence decrease upon interaction with carbonyl groups. The limit of detection is as low as ca. 5 × 10-4 mol·L-1 for hexanal, while fluorescence extinction occurs at much higher concentrations (5 × 10-1·mol L-1), which enables the sensor to be used with a very broad range of detection. Real-time monitoring is possible since the fluorescence loss correlates with the concentration of carbonyl moieties. The performance was validated in simulating as well as in real media, making this sensor suitable for use in a wide range of applications.
ABSTRACT
The adsorption of trichloroethylene, perchloroethylene, and p-xylene on a MFI (Mobile-FIve) zeolite is studied using in situ FTIR spectroscopy at 298 K. Spectra of self-supported zeolites in contact with increasing pressures of pure gas were recorded at equilibrium in the mid-infrared domain. Analysis of the evolution of the shape and location of vibrational bands of the zeolite as a function of the amount adsorbed allowed the observation of structural modifications of the adsorbent for the first time by infrared spectroscopy.
ABSTRACT
The influence of an electric field of silicalite-1-zeolite on the FTIR vibrational absorption spectrum of ethylene has been simulated and compared to experimental spectra. The presence of silicalite-1 produces a global shift and a change of the structure of vibrational bands. To explain the global shift of the ν(12) band (CH(2) scissor mode) and therefore to estimate an effective average field produced by silicalite-1, Stark calculations were performed. These calculations were based on a tensorial formalism implemented in the D(2h)TDS-ST package [M. Sanzharov, M. Rotger, C. Wenger, M. Loëte, V. Boudon, and A. Rouzée, J. Quant. Spectrosc. Radiat. Transf. 112, 41 (2011)]. The value of the field obtained using tensorial formalism (8-11 GV/m) is compared with values obtained using ab initio calculations. A theory of the molecular alignment in the electric field using tensorial formalism is also developed to model the interaction of ethylene in contact with a zeolite environment.
ABSTRACT
A highly sensitive and selective silicon-based microanalytical prototype was used to identify a few ppb of volatile organic compounds (VOCs) in indoor air. Herein, a new nonactivated tannin-derived carbon synthesized by an environmentally friendly method, DM2C, a MIL-101(Cr) MOF, and a DaY zeolite were selected for the preconcentration of BTEX compounds (i.e., benzene, toluene, ethylbenzene, and xylenes). Integrating a small amount of these nanoporous solids inside a miniaturized preconcentration unit led to excellent preconcentration performance. By taking advantage of the high adsorption-desorption capacities of the DM2C adsorbent, concentrations as low as 23.5, 30.8, 16.7, 25, and 28.8 ppb of benzene, toluene, ethylbenzene, ortho- and para-xylene, respectively, were detected in a short analysis time (â¼10 min) even in the presence of 60% relative humidity at 25 °C. The DM2C showed excellent stability over a period of 4 months and more than 500 tests, as well as repeatability, which makes it a very reliable adsorbent for the detection of trace VOCs in indoor air under realistic conditions in the presence of humidity.
ABSTRACT
The "water-silicalite-1" system is known to act as a molecular spring. The successive intrusion-extrusion cycles of liquid water in small crystallites (6 × 3 × 0.5 µm(3)) of hydrophobic silicalite-1 were studied by volumetric and calorimetric techniques. The experiments displayed a decrease of the intrusion pressure between the first intrusion-extrusion cycle and the consecutive ones, whereas the extrusion pressures remained unchanged. However, neither XRD studies nor SEM observations revealed any structural and morphological modifications of silicalite-1 at the long-range order. Such a shift in the value of the intrusion pressure after the first water intrusion-extrusion cycle is attributed to the creation of silanol groups during the first water intrusion. Detailed FTIR and solid-state NMR spectroscopic characterizations provided a molecular evidence of chemical modification of zeolite framework with the formation of local silanol defects created by the breaking of siloxane bonds.
Subject(s)
Silanes/chemistry , Silicates/chemistry , Water/chemistry , Calorimetry , Crystallization , Pressure , Spectroscopy, Fourier Transform Infrared , X-Ray Diffraction , Zeolites/chemistryABSTRACT
Liquid water intrusion in hydrophobic nanoporous silicalite-1, a pure siliceous zeolite, in isothermal conditions under high pressure produces an endothermic effect. After intrusion, confined water in zeolite pores is in a different state from that of the liquid bulk water. Such forced intrusion also chemically modifies the material and tends to render it slightly more hydrophilic.
Subject(s)
Nanostructures/chemistry , Temperature , Water/chemistry , Zeolites/chemistry , Calorimetry , Hydrophobic and Hydrophilic Interactions , Particle Size , Porosity , Pressure , Surface PropertiesABSTRACT
The aim of this work is to assess the capability of a series of nanoporous materials to capture gaseous formaldehyde by adsorption in order to develop air treatment process and gas detection in workspaces or housings. Adsorption-desorption isotherms have been accurately measured at room temperature by TGA under very low pressure (p<2 hPa) on various adsorbents, such as zeolites, mesoporous silica (SBA15), activated carbon (AC NORIT RB3) and metal organic framework (MOF, Ga-MIL-53), exhibiting a wide range of pore sizes and surface properties. Results reveal that the NaX, NaY and CuX faujasite (FAU) zeolites are materials which show strong adsorption capacity and high affinity toward formaldehyde. In addition, these materials can be completely regenerated by heating at 200°C under vacuum. These cationic zeolites are therefore promising candidates as adsorbents for the design of air depollution process or gas sensing applications.