Three-dimensional structure of P3HT assemblies in organic solvents revealed by cryo-TEM.

Poly(3-hexylthiophene) (P3HT) assemblies in vitrified organic solvents were visualized at nanometer scale resolution by cryo-transmission electron microscopy, low dose electron diffraction, and cryo-tomography revealing a three-dimensional lamellar structure formed by the stacking of the conjugated backbones of P3HT with a distance of 1.7 nm and increased order in the bulk of the nanowire. This combination of techniques reveals local structures in dispersion and the condensed state that play a crucial role in the performance of organic electronic devices.

Controlling internal pore sizes in bicontinuous polymeric nanospheres.

Complex polymeric nanospheres were formed in water from comb-like amphiphilic block copolymers. Their internal morphology was determined by three-dimensional cryo-electron tomographic analysis. Varying the polymer molecular weight (MW) and the hydrophilic block weight content allowed for fine control over the internal structure. Construction of a partial phase diagram allowed us to determine the criteria for the formation of bicontinuous polymer nanosphere (BPN), namely for copolymers with MW of up to 17 kDa and hydrophilic weight fractions of ≤0.25; and varying the organic solvent to water ratio used in their preparation allowed for control over nanosphere diameters from 70 to 460 nm. Significantly, altering the block copolymer hydrophilic-hydrophobic balance enabled control of the internal pore diameter of the BPNs from 10 to 19 nm.

Triplet exciton generation in bulk-heterojunction solar cells based on endohedral fullerenes.

Organic bulk-heterojunctions (BHJ) and solar cells containing the trimetallic nitride endohedral fullerene 1-[3-(2-ethyl)hexoxy carbonyl]propyl-1-phenyl-Lu(3)N@C(80) (Lu(3)N@C(80)-PCBEH) show an open circuit voltage (V(OC)) 0.3 V higher than similar devices with [6,6]-phenyl-C[61]-butyric acid methyl ester (PC(61)BM). To fully exploit the potential of this acceptor molecule with respect to the power conversion efficiency (PCE) of solar cells, the short circuit current (J(SC)) should be improved to become competitive with the state of the art solar cells. Here, we address factors influencing the J(SC) in blends containing the high voltage absorber Lu(3)N@C(80)-PCBEH in view of both photogeneration but also transport and extraction of charge carriers. We apply optical, charge carrier extraction, morphology, and spin-sensitive techniques. In blends containing Lu(3)N@C(80)-PCBEH, we found 2 times weaker photoluminescence quenching, remainders of interchain excitons, and, most remarkably, triplet excitons formed on the polymer chain, which were absent in the reference P3HT:PC(61)BM blends. We show that electron back transfer to the triplet state along with the lower exciton dissociation yield due to intramolecular charge transfer in Lu(3)N@C(80)-PCBEH are responsible for the reduced photocurrent.

Mapping and Controlling Liquid Layer Thickness in Liquid-Phase (Scanning) Transmission Electron Microscopy.

Liquid-Phase (Scanning) Transmission Electron Microscopy (LP-(S)TEM) has become an essential technique to monitor nanoscale materials processes in liquids in real-time. Due to the pressure difference between the liquid and the microscope vacuum, bending of the silicon nitride (SiNx ) membrane windows generally occurs. This causes a spatially varying liquid layer thickness that makes interpretation of LP-(S)TEM results difficult due to a locally varying achievable resolution and diffusion limitations. To mediate these difficulties, it is shown: 1) how to quantitatively map liquid layer thickness for any liquid at less than 0.01 e- Å-2 total dose; 2) how to dynamically modulate the liquid thickness by tuning the internal pressure in the liquid cell, co-determined by the Laplace pressure and the external pressure. It is demonstrated that reproducible inward bulging of the window membranes can be realized, leading to an ultra-thin liquid layer in the central window area for high-resolution imaging. Furthermore, it is shown that the liquid thickness can be dynamically altered in a programmed way, thereby potentially overcoming the diffusion limitations towards achieving bulk solution conditions. The presented approaches provide essential ways to measure and dynamically adjust liquid thickness in LP-(S)TEM experiments, enabling new experiment designs and better control of solution chemistry.

Intermolecular channels direct crystal orientation in mineralized collagen.

The mineralized collagen fibril is the basic building block of bone, and is commonly pictured as a parallel array of ultrathin carbonated hydroxyapatite (HAp) platelets distributed throughout the collagen. This orientation is often attributed to an epitaxial relationship between the HAp and collagen molecules inside 2D voids within the fibril. Although recent studies have questioned this model, the structural relationship between the collagen matrix and HAp, and the mechanisms by which collagen directs mineralization remain unclear. Here, we use XRD to reveal that the voids in the collagen are in fact cylindrical pores with diameters of ~2 nm, while electron microscopy shows that the HAp crystals in bone are only uniaxially oriented with respect to the collagen. From in vitro mineralization studies with HAp, CaCO3 and γ-FeOOH we conclude that confinement within these pores, together with the anisotropic growth of HAp, dictates the orientation of HAp crystals within the collagen fibril.

Suspended crystalline films of protein hydrophobin I (HFBI).

Protein interfaces play an essential role in both natural and man-made materials as stabilizers, sensors, catalysts, and selective channels for ions and small molecules. Probing the molecular arrangement within such interfaces is of prime importance to understand the relation between structure and functionality. Here we report on the preparation and characterization of large area suspended crystalline films of class II hydrophobin HFBI. This small, amphiphilic globular protein readily self-assembles at the air-water interface into a 2D hexagonal lattice which can be transferred onto a holey carbon electron microscopy grid yielding large areas of hundreds of square micrometers intact hydrophobin film spun across micron-sized holes. Fourier transform analysis of low-dose electron microscopy images and selected area electron diffraction profiles reveal a unit cell dimension a=5.6±0.1nm, in agreement with reported atomic force microscopy studies on solid substrates and grazing incidence X-ray scattering experiments at the air-water interface. These findings constitute the first step towards the utilization of large-area suspended crystalline hydrophobin films as membranes for ultrapurification and chiral separation or as biological substrates for ultrafast electron diffraction.