ABSTRACT
BACKGROUND: This study aimed to investigate the effects of semidry milling on the quality attributes of highland barley flour and highland barley bread. Highland barley flours were prepared by dry (DBF), semidry (SBF), and wet (WBF) milling methods. The properties of different highland barley flours were analyzed, and highland barley breads made from different highland barley flours were evaluated. RESULTS: The results showed that WBF had the lowest damaged starch content (15.2 g kg-1 ), and the contents of damaged starch in SBF-35 and SBF-40 (43.5 g kg-1 and 24.1 g kg-1 respectively) were lower than that of DBF (87.6 g kg-1 ). And SBF-35 and SBF-40 with large particles exhibited low hydration performance. In addition, SBF-35 and SBF-40 had higher pasting viscosity, pasting temperature, ΔH, and relative crystallinity, consequently resulting in better gel properties than other highland barley flours. These properties could help SBF-35 and SBF-40 develop high-quality bread with large specific volume and superior crumb structure and texture that is similar to the bread with WBF. CONCLUSION: Overall, semidry milling not only could improve the characteristics of HBF, but also avoid high starch damage by dry milling and water wasting by wet milling. What is more, highland barley breads with SBF-35 and SBF-40 had preferable appearance and crumb texture. Therefore, semidry milling could be regarded as a feasible way to produce highland barley flour. © 2023 Society of Chemical Industry.
Subject(s)
Flour , Hordeum , Bread , Hordeum/chemistry , Starch/chemistry , WaterABSTRACT
The purpose of this study was to compare the gelatinization and retrogradation properties of highland barley starch (HBS) using different extraction methods. We obtained HBS by three methods, including alkali extraction (A-HBS), ultrasound extraction (U-HBS) and enzyme extraction (E-HBS). An investigation was carried out using a rapid viscosity analyzer (RVA), texture profile analysis (TPA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and Fourier-transform infrared spectrometry (FTIR). It is shown that the different extraction methods did not change the crystalline type of HBS. E-HBS had the lowest damaged starch content and highest relative crystallinity value (p < 0.05). Meanwhile, A-HBS had the highest peak viscosity, indicating the best water absorption (p < 0.05). Moreover, E-HBS had not only higher G' and Gâ³ values, but also the highest gel hardness value, reflecting its strong gel structure (p < 0.05). These results confirmed that E-HBS provided better pasting stability and rheological properties, while U-HBS provides benefits of reducing starch retrogradation.
Subject(s)
Hordeum , Starch , Calorimetry, Differential Scanning , Starch/chemistry , Viscosity , Water , X-Ray DiffractionABSTRACT
The structural and functional properties of physical modified rice flour, including ultrasound treated rice flour (US), microwave treated rice flour (MW) and hydrothermal treated rice flour (HT) were investigated with wet-milled rice flour (WF) used as a positive control. The results showed the presence of small dents and pores on the rice flour granules of US and MW while more fragments and cracks were showed in HT. XRD and FTIR revealed that moderate ultrasonic treatment promoted the orderly arrangement of starch while hydrothermal treatment destroyed the crystalline structure of rice flour. In addition, the significant decrease of gelatinization enthalpy and the narrowing gelatinization temperature were observed in US. Compared to that of SF, adding physical modified rice flour led to a batter with higher viscoelasticity and lower tan δ. However, the batter added HT exhibited highest G' and GⳠvalues and lowest tan δ, which led to a harder texture of bread. Texture analysis demonstrated that physical modified rice flour (except HT) reduced the hardness, cohesion, and gumminess of rice bread. Especially, the specific volume of bread with US increased by 15.6% and the hardness decreased by 17.6%. This study suggested that ultrasound treatment of rice flour could improve texture properties and appearance of rice bread.
Subject(s)
Flour , Oryza , Bread , Oryza/chemistry , Starch/chemistryABSTRACT
The rice quality and starch functional properties, as well as the storability of three YY-IJHR cultivars, which included YY12 (biased japonica type YY-IJHR), YY1540 (intermedius type YY-IJHR) and YY15 (biased indica type YY-IJHR), were studied and compared to N84 (conventional japonica rice). The study results suggested that the three YY-IJHR varieties all had greater cooking and eating quality than N84, as they had lower amylose and protein content. The starch of YY-IJHR has a higher pasting viscosity and digestibility, and there was a significant difference among the three YY-IJHR cultivars. Rice aroma components were revealed by GC-IMS, which indicated that the content of alcohols vola-tile components of YY-IJHR were generally lower, whereas the content of some aldehydes and esters were higher than N84. In addition, YY-IJHR cultivars' FFA and MDA contents were lower, which demonstrated that YY-IJHR had a higher palatability and storability than those of N84 in fresh rice and rice stored for 12 months. In conclusion, this study suggested that YY-IJHR had better rice quality and storability than N84. PCA indicated that the grain quality and storability of YY12 and YY15 were similar and performed better than YY1540, while the aroma components and starch functional properties of YY-IJHR cultivars all had significant differences.
Subject(s)
Oryza , Starch , Amylose , Cooking , Edible Grain/metabolism , Oryza/metabolism , Starch/metabolismABSTRACT
High-pressure microfluidization treatment (HPMT) was performed on the insoluble dietary fiber (IDF) of highland barley bran (HBB), with conditions set at 60 MPa (IDF-60), 120 MPa (IDF-120), and two consecutive high-pressure treatments at 120 MPa (IDF-120-2), respectively. Then the particle size, structural, physicochemical and adsorption properties of different IDF samples were analyzed. After HPMT, the particle size of IDF samples gradiently decreased (p < 0.05), and part of IDF was transferred into soluble dietary fiber (SDF), accompanied by the decrease of hemicellulose and lignin content. In addition, the morphology of the IDF samples became more fragmented and wrinkled, and the two consecutive treatments at 120 MPa significantly damaged the crystalline structure of the IDF. Moreover, the adsorption capacities to water, oil, cholesterol, and NO2- were basically enhanced with the increase of treatment pressure and treatment number. The IDF-120-2 sample had the strongest water/oil-holding, swelling, and cholesterol trapping capacities, and the IDF-120 showed strongest NO2- trapping capacity (pH = 2). Through the correlation analysis, the adsorption capacities were positively to the particle size and SDF content, and negatively correlated with the specific surface area (SSA) and IDF content. The adsorption capacities of IDF for the four substances were positively correlated with each other.
Subject(s)
Dietary Fiber , Hordeum , Dietary Fiber/analysis , Nitrogen Dioxide , Cholesterol , WaterABSTRACT
The objective of this study was to compare the structural, thermal, rheological and digestive properties of highland barley starch (HBS) by different extraction methods. Five techniques were used to extract HBS: Alkali extraction, Ultrasound extraction, double enzyme extraction (DE), three enzyme extraction (TE) and ultrasonic assisted TE (U-TE). The results indicated that the Ultrasound extracted HBS had fewer Maltese crosses, lower molecular weight (Mw), and higher content of damaged starch (P < 0.05). Meanwhile, DE extracted HBS had higher Mw, and the content of short amylopectin than that of Alkali extracted HBS (P < 0.05). Additionally, the DE extracted HBS showed the highest relative crystallinity and good short-range ordered structure, which led to the outcome of stronger thermal stability and higher values of G' and G'' (P < 0.05). These results indicated that enzymatic extraction could better protect the resistance of HBS by protecting its physicochemical properties.
Subject(s)
Hordeum , Starch , Starch/chemistry , Hordeum/chemistry , Amylopectin/chemistry , Molecular Weight , DigestionABSTRACT
The effects of steam explosion (SE)-assisted ultrasound (SEU), citric acid (SEC), sodium hydroxide (SEA), and cellulase (SEE) treatment on the properties of soluble dietary fibre (SDFP) extracted from highland barley bran were analysed. The results showed that SE pretreatment combined with other methods effectively improves the SDFP yield. The highest yield of SDF (20.01%) was obtained through SEA treatment. SEU-SDFP had a loose and porous structure, whereas the surface of SEC-SDFP and SEA-SDFP presented a complicated and dense texture. Although SE pretreatment reduced the thermal stability of SDFP, SEC and SEE treatment maintained its thermal stability. Furthermore, SEU-SDFP exhibited the highest water and oil holding capacities, and cholesterol and nitrite ion adsorption capacities. SEE-SDFP exhibited the best DPPH and ABTS radical scavenging abilities. In summary, four SE-assisted extraction methods had different advantages, and highland barley bran SDF can be considered as a potential functional additive in the food industry.
Subject(s)
Hordeum , Steam , Hordeum/chemistry , Dietary Fiber/analysis , Water/chemistry , Plant Extracts/chemistryABSTRACT
Continuous instant pressure drop (CIPD) treatment effectively reduces microbial contamination in whole highland barley flour (WHBF). Base on it, this study further investigated its effects on flour properties (especially rheological properties) and volatile compounds (VOCs) profile of WHBF, and compared it with that of ultraviolet-C (UV-C), ozone and hot air (HA) treatments. The results showed that the damaged starch content (6.0%) of CIPD-treated WHBF was increased, leading to a rough surface and partial aggregation of starch particle, thereby increasing the particle size (18.06 µm of D10, 261.46 µm of D50 and 534.44 µm of D90). Besides, CIPD treatment exerted a positive influence on the structure and rheological properties of WHBF, including an elevation in pasting temperature and viscosity. Notably, CIPD-treated WHBF exhibited higher storage modulus and loss modulus compared to the other three groups of sterilization treatments, contributing to the formulation of a better-defined and stable gel strength (tan δ = 0.38). UV-C and ozone, as cold sterilization techniques, also induced alterations in specific characteristics of WHBF. UV-C treatment led to changes in WHBF's crystallinity, while ozone treatment caused modifications in the secondary protein structure of WHBF. A total of 68 VOCs were identified in raw WHBF (including 3 acids, 19 alcohols, 25 aldehydes, 1 alkene, 8 esters, 2 ethers, 3 furans, and 7 ketones). The maximum flavor-contributing VOC in CIPD-treated WHBF remained dimethyl sulfide monomer (cabbage aroma), consistent with the raw WHBF. Conversely, in HA-treated WHBF, the maximum flavor-contributing VOC shifted to 2-furanmethanethiol monomer (roasted coffee aroma), altering the initial flavor presentation. These findings will provide strong support for the application of CIPD technology in the powdery foods industry.
Subject(s)
Hordeum , Ozone , Volatile Organic Compounds , Flour , Hordeum/chemistry , Volatile Organic Compounds/chemistry , Starch/chemistryABSTRACT
The influences of egg white (EW), egg yolk (EY) and whole egg (WE) on the structure of highland barley dough and the quality of highland barley bread were explored. The results showed that egg powder reduced G' and G" of highland barley dough, which led to the softer texture of dough and endowed bread with a larger specific volume. EW increased the percentage of ß-sheet of highland barley dough, EY and WE promoted the transformation from random coil to ß-sheet and α-helix. Meanwhile, more disulfide bonds were formed from free sulfhydryl groups in the doughs with EY and WE. These properties of highland barley dough could help highland barley bread develop a preferable appearance and textural feature. It is worth noting that highland barley bread containing EY has more flavorful substances and a better crumb structure, which were similar to that of whole wheat bread. The highland barley bread with EY received a high score according to the sensory evaluation in consumer acceptance.
Subject(s)
Hordeum , Hordeum/chemistry , Powders , Bread , EggsABSTRACT
To shorten the fermentation time and reduce the heterozygous bacteria contamination during fresh fermented rice noodles (FFRNs) fermentation, four starter cultures that consist of Limosilactobacillus fermentum, Lactoplantibacillus plantarum and Saccharomyces cerevisiae were used to produce FFRN. The cooking qualities and texture profiles of FFRNs, the dynamics of microbial diversities and volatile compounds at different fermentation stages were explored. Results showed that the fermentation time of the adding starter culture groups required 12 h, while that the natural fermentation (NF) group required 36 h. Significant differences were observed in the texture profiles and cooking qualities of these five groups FFRNs (P ï¼ 0.05). In addition, compared with NF group, the microbial diversity of four adding starter culture groups was significantly lower, which meant that the edible safety of FFRNs could be enhanced. Meanwhile, a total of 115 volatile compounds were detected by Gas chromatography-ion Mobility Spectrometry and Gas chromatography-mass spectrometry, the aldehydes, alcohols, acids and esters were increased while aldehydes were decreased in FFRNs during fermentation. Among these, the relative odor activity value of 50 volatile compounds was greater than 0.1, contributing unique flavors to FFRNs. Notably, the flavor of Lactoplantibacillus plantarum + Saccharomyces cerevisiae (L.p + S.c) and Lactoplantibacillus plantarum + Limosilactobacillus fermentum + Saccharomyces cerevisiae (L.pf + S.c) groups was richer than that of other groups.
Subject(s)
Oryza , Aldehydes , Fermentation , Gas Chromatography-Mass Spectrometry , Oryza/chemistry , Saccharomyces cerevisiaeABSTRACT
The experiments of contact ultrasound-assisted far-infrared radiation (FIR) drying on potato slices were conducted to investigate the effects of ultrasonic power on drying characteristics and quality properties. The results showed that contact ultrasound was helpful for accelerating mass transfer of the samples, and the improvement of ultrasonic power could significantly shorten drying time. The ultrasonic reinforcement effect on drying rate declined along with the decrease in moisture content. D eff values were within 1.15 × 10-10 and 1.96 × 10-10 m2/s, and improved with an increase in ultrasound power. Compared with FIR dried ones, more and larger pore size of microcapillaries in the samples' tissue structure could be observed with contact ultrasound application, and higher ultrasonic power produced more microtunnels. Contact ultrasound in FIR drying could reduce the color difference of dried potato slices, and decrease the hardness and brittleness values. Higher TPC and TFC could be achieved as ultrasonic power increased.