ABSTRACT
Deciphering the facet-dependent surface properties of clay minerals holds vital significance in both fundamental research and practical engineering applications. To date, the anisotropic local charge density of serpentine surfaces still remains elusive, and thus, the interaction energies and associated aggregate structures between different crystal planes of serpentine cannot be quantitatively determined. In this work, different crystal planes of serpentine (i.e., SiO basal, MgOH basal, and edge) were selectively exposed, and their surface potentials and charge densities were determined using atomic force microscopy (AFM) force measurements coupled with Derjaguin-Landau-Verwey-Overbeek (DLVO) theory fitting. The SiO and edge planes consistently exhibited a permanently negative surface charge, whereas the point of zero charge (PZC) on the MgOH plane was estimated to be pH 9.0-11.0. Based on the interaction energy calculation between different serpentine planes, the aggregation structures of serpentine were predicted. Combined with scanning electron microscopy observation of freeze-dried samples, SiO-MgOH and MgOH-edge associations were found to dominate the aggregate structures at pH ≤ 9.0, thereby resulting in a stacking or "card-houses" structures. In contrast, all of the plane associations exhibited the repulsive interaction energy at pH 11.0, which led to a completely dispersed system, ultimately causing the most severe fine particle entrainment during froth flotation. Our work provides quantitative clarification of facet-dependent surface properties and aggregate structures of serpentine under different pH conditions, which will help improve the fundamental understanding of colloidal behaviors of clay minerals.
ABSTRACT
A microfluidic method was developed to study the ion-specific effect on bubble coalescence in salt solutions. Compared with other reported methods, microfluidics provides a more direct and accurate means of measuring bubble coalescence in salt solutions. We analyzed the coalescence time and approach velocity between bubbles and used simulation to investigate the pressure evolution during the coalescence process. The coalescence time of the three salt solutions decreased initially and then increased as the concentration of the salt solution was increased. The concentration with the shortest coalescence time is considered as the transition concentration (TC) and exhibits ion-specific. At the TC, the change in coalescence time indicates a shift in the effect of salt on bubble coalescence from facilitation to initial inhibition. Meanwhile, it can be seen that the sodium halide solutions significantly inhibit the bubble coalescence and the inhibition capability follows the order NaCl > NaBr > NaI. The results of the approach velocity show that the coalescence time decreases with increasing approach velocity, as well as the approach velocity was strongly influenced by concentration. The approach velocity undergoes a significant change at the TC. Furthermore, simulations of bubble coalescence in the microchannel indicate that the vertical pressure gradient at the center point of the bubble pairs increases as bubbles approach, driving liquid film drainage until bubble coalescence. The pressure at the center of the bubble pair reaches the maximum when the bubbles have first coalesced. It was further revealed that the concentration of the salt solution has a significant impact on the maximum pressure, as evidenced by the observed trend of decreasing pressure values with increasing concentrations.
ABSTRACT
Low-rank coal (LRC) contains large amounts of harmful impurities that must be processed before utilization. Flotation is an effective means for separating fine particles, which can be influenced by air solubility in water. In this work, deaerated water (DW), ordinary water (OW), and pressurized water (PW) were prepared to research the underlying mechanism of the effect of air solubility on the flotation performance of LRC. The results show that PW dissolves the greatest amount of air in the three kinds of water (DW, OW, and PW). The flotation performance of LRC in different water types is directly proportional to air solubility in aqueous solutions. In addition, the induction time of LRC in PW (600 ms) is significantly shorter than those in OW (1200 ms) and DW (4000 ms). Atomic force microscopy (AFM) studies reveal that typical interfacial nanobubbles (NBs) only form on a highly oriented pyrolytic graphite (HOPG) surface in PW due to the supersaturated air in water. Furthermore, the interaction between LRC particles and HOPG in PW is significantly stronger than those in both OW and DW, which is attributed to the capillary force of rgw nanobubble bridge formed between particles. The hydrophobic interaction enhanced by NBs is critically important for the attachment of LRC particles to macrobubbles in flotation. Overall, air solubility in water has a great effect on LRC flotation performance, and PW flotation technology can be extended to LRC purification.
ABSTRACT
It is well recognized that an improved flotation recovery can be achieved by introducing nanobubbles to common flotation practice due to the increased capture efficiency between bubbles and particles. However, the specific role of nanobubbles in bubble-particle interactions (collision, attachment, and detachment) is not well understood. In the present study, we explore the role of surface nanobubbles in bubble-particle detachment. Surface nanobubbles were introduced via ethanol-water exchange and their presence was confirmed using laser scanning confocal microscopy (LSCM). The effect of surface nanobubbles on bubble-particle detachment behavior was then investigated using an oscillating bubble apparatus. Bubble-particle aggregate stability was evaluated using critical detachment amplitude. Further, bubble-particle detachment forces in the absence and presence of nanobubbles were measured directly using a micro-nano mechanical testing system. Using LSCM, numerous surface nanobubbles were observed on a glass surface after ethanol-water exchange, regardless of wettability. The number and lateral dimensions of generated nanobubbles on the hydrophilic surface were significantly smaller than that on the hydrophobic surface. Surface nanobubbles increased the stability of bubble-particle aggregates. Macroscopic air bubbles coalesce with the nanobubbles on the particle surface, increasing the pinning effect of the three-phase contact line and advancing contact angle. As a result, the capillary force between bubbles and particles increased in the presence of surface nanobubbles.
ABSTRACT
A deep understanding of the bubble-particle attachment is critical to flotation science and engineering. Historically, the so called "hydrophobic force" has been widely accepted to be the reason for bubble-particle attachment although its origin is still under debate now. In this paper, a number of representative mechanisms for the origin of hydrophobic attractions are reviewed, with the main focus being on solid-solid systems. Then we highlight the recent advances in the hydrophobic force measurement between bubble and particle. Quantitative description of the hydrophobic force in bubble-particle system has been achieved recently. This review is closed with a brief conclusion and perspective discussion.
ABSTRACT
Coal gangue (CG), an industrial solid waste with high contents of Li and Ga, has attracted the attention of researchers. However, the utilization of CG remains an economic challenge. Pre-enrichment of Li and Ga by flotation was carried out with a view to improving the comprehensive utilization of CG. Mineral composition, time-of-flight secondary ion mass spectrometry (TOF-SIMS), and elemental composition were used to investigate the embeddedness of each mineral and the mode of elemental occurrence in the CG. The results showed that the main mineral compositions of the CG were kaolinite, quartz, and pyrite. Li and Ga were mainly associated with kaolinite and other clay minerals. Li and Ga had a high correlation with Al2O3 and SiO2, while Li and Ga were highly correlated with SiO2/Al2O3, indicating that Li and Ga may be associated with one or more high-alumina minerals. In addition, flotation tests proved that synergistic sorting of ash impurities and valuable components from the CG was a cost-effective method. The ash content of the final product was increased by 3% under the process of prediscarding concentrate-dissociation-secondary flotation, and the contents of Li and Ga in the final product were also slightly enriched, and the recovery rate of the carrier minerals of Li and Ga can reach 66.1%.
ABSTRACT
The slurry phase, foam phase, and slurry-foam phase interfaces are the typical locations for bubble-particle detachment, and significant advancements have been achieved in the detachment theory of the slurry phase and foam phase. However, the microscopic detachment mechanism of particles at the slurry-foam phase interface is still unclear. Specifically, there is still debate concerning the collision detachment mechanism of bubble-particle aggregates. Thus, this work investigated the effects of particle size and hydrophobicity on bubble-particle collision detachment. First, a tensiometer detected the detachment force between particles and bubbles. Next, using a high-speed dynamic camera, the collision detachment probability and detachment behavior of bubble-particle aggregates at the interface (solid surface) were statistically recorded and captured. Last, MATLAB software was used to analyze the trajectory and velocity of the particles and the velocity and projected area of the bubbles in the process of bubble-particle collision detachment. This allows for a deeper investigation of the mechanism underlying the detachment of particles of various sizes and hydrophobicity. It is discovered that as particle hydrophobicity increases, the probability of bubble-particle collision detachment reduces. This is because when particle hydrophobicity increases, so does the interaction force between particles and bubbles, improving the stability of the bubble-particle aggregates. Simultaneously, it is discovered that there are notable differences in the collision detachment mechanisms of various particle sizes. Due to their low gravity, the fine particles in the bubble-particle aggregate will slide down the bubble's surface when it collides with the solid surface. This differential velocity motion between the particle and the bubble plays a significant role in the fine particles' detachment. However, the gravity of the coarse particles is strong enough to squeeze the bubbles vertically, and bubble oscillation is an important reason for the detachment of the bubble-particle aggregates. The study's findings advance our understanding of the bubble-particle collision detachment mechanism and offer a theoretical direction for investigating collision detachment behavior at the real slurry-foam phase interface.
ABSTRACT
The coal structure is extensively used for studying the properties of coal, and the construction of accurate and reliable coal structure models can promote these researches. In this study, Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) were used to analyze the changes in the coal structure as a function of the coalification degree, and a semiquantitative model construction method based on FTIR, XRD, and X-ray photoelectron spectroscopy (XPS) analyses was proposed. With an increase in the coalification degree, the size of the aromatic cores in the coal increased. During the conversion from lignite to bituminous coal, the content of aliphatic structures increased, while the content of oxygen-containing functional groups (OFGs) significantly decreased. Conversely, during the conversion from bituminous coal to anthracite, the content of aliphatic structures decreased while the content of OFGs slightly increased. The calculated FTIR spectra of the coal structure models were consistent with the experimental FTIR spectra, which confirmed the accuracy of the models. Furthermore, the models successfully explained the microscopic mechanism underlying the differences in the wettability of the coal samples with varying coalification degrees. The construction method and coal structure models in this study will be more widely applied in future research.
ABSTRACT
BACKGROUND AND PURPOSE: Due to high chemical shift displacement, challenges emerge at ultra-high fields when measuring metabolites using 1H-MRS. Our goal was to investigate how well the high SNR and high bandwidth spin-echo (HISE) technique perform at 5T for detecting target metabolites in brain tumors. MATERIALS AND METHODS: Twenty-six subjects suspected of having brain tumors were enrolled. HISE and point-resolved spectroscopy (PRESS) single-voxel spectroscopy scans were collected with a 5T clinical scanner with an intermediate TE (TE = 144 ms). The main metabolites, including total NAA, Cr, and total Cho, were accessed and compared between HISE and PRESS using a paired Student t test, with full width at half maximum and SNR as covariates. The detection rate of specific metabolites, including lactate, alanine, and lipid, and subjective spectral quality were accessed and compared between HISE and PRESS. RESULTS: Twenty-three pathologically confirmed brain tumors were included. Only the full width at half maximum for total NAA was significantly lower with HISE than with PRESS (P < .05). HISE showed a significantly higher SNR for total NAA, Cr, and total Cho compared with PRESS (P < .05). Lactate was detected in 21 of the 23 cases using HISE, but in only 4 cases using PRESS. HISE detected alanine in 8 of 9 meningiomas, whereas PRESS detected alanine in just 3 meningiomas. PRESS found lipid in more cases than HISE, while HISE outperformed PRESS in terms of subjective spectral quality. CONCLUSIONS: HISE outperformed the clinical standard PRESS technique in detecting target metabolites of brain tumors at 5T, particularly lactate and alanine.
Subject(s)
Brain Neoplasms , Meningeal Neoplasms , Meningioma , Humans , Magnetic Resonance Spectroscopy/methods , Meningioma/diagnostic imaging , Reproducibility of Results , Brain Neoplasms/metabolism , Lactic Acid/metabolism , Alanine/metabolism , Lipids , Brain/metabolismABSTRACT
In the flotation process, the frother, which is typically a surfactant, can be added to the pulp to reduce the surface tension and create stable foam. Currently, the nonionic mixed surfactant is widely employed as the frother for fine coal flotation. In this study, we focused on examining the foam properties of a mixed surfactant comprising short-chain methyl isobutyl carbinol (MIBC) and long-chain polyethylene glycol-1000 (PEG). Analytical techniques such as surface tension measurement, dynamic foam stability measurement, bubble morphology observation, and foam film drainage measurement were used to investigate the foam properties in single and mixed surfactant solution from a macroscopic scale to a microscopic scale. The surface tension results indicated that PEG exhibited higher surface activity than MIBC, and the addition of PEG to MIBC resulted in a significant reduction in solution surface tension. The dynamic foam stability analysis revealed that the incorporation of a small amount of PEG into MIBC solution notably improved foam stability. Furthermore, the addition of PEG to the MIBC solution led to a shift in the bubble size distribution curve from a "double peak" to a "single peak" shape. This shift indicated a substantial reduction in bubble size, indicating an enhanced inhibition of bubble coalescence. Additionally, the liquid film drainage rate was significantly slowed down, and the stability of the liquid film was improved upon the addition of PEG to MIBC. This improvement can be attributed to the synergistic effect of MIBC and PEG molecules adsorbed at the gas-liquid interface. The synergistic effect of mixed MIBC-PEG was due to the additional surface tension gradient created by the difference in surface activity between PEG and MIBC. This surface tension gradient enhances the Marangoni flow of surfactant molecules, thereby improving the self-healing ability of the liquid film and increasing its stability.
ABSTRACT
A photochemical system combining iron (hydr)oxides and oxalate (Ox) shows application prospects in wastewater treatment due to the abundance of reactive oxygen species (ROS) generation. Nevertheless, it is a challenge to the investigate photochemical activity of iron (hydr)oxides/Ox systems with varying structural properties. Herein, the photochemical behaviors of Ox on goethite (Gt) surface from the view of structural dependent activity, containment degradation, and ROS generation were explored in detail. Results confirmed that bidentate mononuclear was formed on Gt surface after complexing Ox. Combined with density functional theory calculation and pH time evolution during aniline degradation, the photochemical activity of the Gt/Ox system fell in between that of ferrihydrite/Ox and hematite/Ox systems. After irradiating 120 min visible light, 96.5% aniline was degraded by 1.0 mM Ox and 0.2 g/L Gt. The amount of â¢OH in vis/Gt/Ox system could be up to 309.3 µM and its generation was closely associated with Fe(II) while slightly affected by the generated H2O2. Moreover, as revealed by high-performance liquid chromatography with mass spectrometric and Ecological Structure Activity Relationships software, the toxicity of the intermediates of aniline degradation in the vis/Gt/Ox system towards fish and green algae increased first but then declined accompanied by the generation of non-toxic ring-opening products at the end of reaction. According to the findings in the presented study, it could be concluded that vis/Gt/Ox is a promising approach to wiping out aniline wastewater.
Subject(s)
Hydroxyl Radical , Oxalates , Oxalates/chemistry , Hydroxyl Radical/chemistry , Hydrogen Peroxide/chemistry , Reactive Oxygen Species , Oxidation-Reduction , Ferric Compounds/toxicity , Ferric Compounds/chemistry , Iron/chemistry , OxidesABSTRACT
Efficient flotation of low-rank coal is of great significance for the development of green and low-carbon cycles. Temperature is a crucial parameter of flotation, but the mechanism of its effect on flotation lacks understanding. In this paper, the mechanism was studied by kinetic flotation, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, low-temperature liquid-nitrogen adsorption (LP-N2A), X-ray photoelectron spectroscopy (XPS), and molecular dynamics simulation. The flotation combustible recovery gradually decreases as temperature rises. Compared with 60 °C, the combustible recovery at 5 °C increases by 18.13%. The desorption energy for oil droplets decreases as the temperature rises. As a result, the oil droplets are easier to desorb at high temperatures. The SEM and LP-N2A results demonstrate that the pores and fractures of the coal sample are well developed. Also, the oil-water interfacial tension and viscosity of oil droplets decrease as the temperature rises, while the diffusion ability increases. These increase the volume of oil droplets that penetrate into the pores, resulting in poor spreadability of oil droplets on the coal surface. The average volume of bubbles gradually increases as temperature rises, which renders the flotation foam unstable and worsens the flotation. Therefore, the flotation performance is better at low temperatures.
ABSTRACT
Graphite anode has great potential toward potassium ion storage for abundant reserves, yet it suffers from the large volume expansion and slow diffusion rate. Herein, the low-cost biochemical fulvic acid-derived amorphous carbon (BFAC) is employed to modify the natural microcrystalline graphite (BFAC@MG) by a simple mixed carbonization strategy. The BFAC smooths the split layer and folds on the surface of microcrystalline graphite and builds the heteroatom-doped composite structure, which effectively alleviates the volume expansion caused by K+ electrochemical de-intercalation processes, together with improving electrochemical reaction kinetics. As expected, the optimized BFAC@MG-0.5 exhibits superior potassium-ion storage performance, which delivers a high reversible capacity (623.8 mAh g-1), excellent rate performance (147.8 mAh g-1 at 2 A g-1), and remarkable cycling stability (100.8 mAh g-1 after 1200 cycles). As a practical device application, the potassium-ion capacitors are assembled using the BFAC@MG-0.5 anode and commercial activated carbon cathode, which exhibits a maximum energy density of 126.48 Wh kg-1 and superior cycle stability. Significantly, this work demonstrates the potential of microcrystalline graphite as the host anode material for potassium-ion storage.
ABSTRACT
Traditional froth flotation is the primary method for the separation and upgrading of fine mineral particles. However, it is still difficult for micro-fine and low-quality minerals to effectively separate. It is generally believed that bubble miniaturization is of great significance to improve flotation efficiency. Due to their unique physical and chemical properties, the application of nanobubbles (NBs) in ore flotation and other fields has been widely investigated as an important means to solve the problems of fine particle separation. Therefore, a fundamental understanding of the effect of NBs on flotation is a prerequisite to adapt it for the treatment of fine and low-quality minerals for separation. In this paper, recent advances in the field of nanobubble (NB) formation, preparation and stability are reviewed. In particular, we highlight the latest progress in the role of NBs on particles flotation and focus in particular on the particle-particle and particle-bubble interaction. A discussion of the current knowledge gap and future directions is provided.
ABSTRACT
Coal floatability evaluation is of vital importance in the prediction of flotation results and the design of a flotation flowsheet. In this work, a new experimental approach based on bubble-particle attachment kinetics (BPAK) and bubble-particle detachment kinetics (BPDK) were proposed to evaluate the floatability of coal particles. During attachment and detachment processes, a variation of coating angles θ(t) for different density coal particles were measured and fitted to a first-order model. Modified attachment rate constant k a * and modified detachment rate constant k d * were used as yardsticks of floatability. For comparison, flotation kinetics, induction time, and contact angle measurements were also conducted. A consistent sequence of floatability was obtained as: -1.4 > 1.4-1.6 > +1.6 g/cm3. The modified flotation rate constant k* obtained in flotation kinetics was used as a yardstick to assess the accuracy of floatability evaluation methods. By individually fitting k* to parameters obtained in other tests, a simple and close linear relationship between k* and modified attachment rate constant k a * was established, rather than 1/k d * in BPDK tests, induction time t ind, or (1 - cosα) in contact angle measurements. Consequently, k a * is thought to be a better criterion as k* could be quantitatively predicted by BPAK tests. Throughout this work, BPAK is an effective method to evaluate coal floatability.
ABSTRACT
In this study, hydrophilic, medium hydrophobic, and strong hydrophobic probes are obtained via treatment with plasma and octadecyl trichlorosilane. The interaction between the probes and interfacial nanobubbles (INBs) is examined using atomic force microscopy. The results show that a hydrophilic probe can scan the true shape of the INBs, and the distance between the first inflection point and the zero point of the approach force curve is equal to the vertical height of the nanobubble. The medium hydrophobic probe caused severe deformation of INB morphologies in the horizontal direction during scanning; nevertheless, the complete shape of the INB is obtained using this probe by lowering the scanning parameters. However, the characteristic of the approach force curve proves that the size of the nanobubbles is underestimated. The strong hydrophobic probe deforms INB morphologies severely, whose size cannot be obtained. The maximum attractive force in the approach force curve and the adhesive force in the retract force curve obtained using the strong hydrophobic probe are approximately 6 and 12 nN, respectively, which are both higher than those of the hydrophilic and medium hydrophobic probes. It is reasoned that the liquid film is maintained between the hydrophilic probe and the INBs, the medium hydrophobic probe pierces the INBs slightly, while the strong hydrophobic probe punctures the liquid film and demonstrates a pinning effect.
ABSTRACT
In this study, the effects of air bubbles and nanobubbles on flotation performance and kinetics of oxidized coal were investigated. The surface properties of the coal sample before and after oxidation were characterized by a scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). The nanobubbles on highly oriented pyrolytic graphite (HOPG) were observed by an atomic force microscope (AFM). The interaction between coal and conventional bubbles in the absence and presence of nanobubbles was explained by induction time. Flotation results showed that oxidized coal flotation in the presence of nanobubbles resulted in 10% higher combustible matter recovery than conventional air bubble flotation. Moreover, it was found that the flotation of oxidized coal in the absence and presence of nanobubbles can be best described using the first-order model with the rectangular model. AFM images analysis showed that a large number of nanobubbles were produced and attached to the oxidized coal surface. The induction times of the oxidized coal in the absence and presence of nanobubbles were 1000 and 39 ms, respectively, indicating that the existence of nanobubbles effectively promotes the interaction between oxidized coal and macroair bubbles. In addition, the agglomeration between oxidized coal particles also occurred spontaneously in the presence of nanobubbles, which was helpful in improving the combustible matter recovery and flotation rate of oxidized coal.
ABSTRACT
Establishing the dynamics of wetting film thinning and rupture during the bubbles attached on the coal surface is extremely important for flotation. However, studying the dynamics of bubble attachment from the molecular level using molecular dynamics simulation (MDS) has rarely been reported. In this work, the dynamics of bubble attachment at three different coal [low-rank coal (LRC), bituminous coal (BC), and anthracite coal (AC)] surfaces with varying degrees of coalification were studied using MDS. In the bubble attachment process, the wetting film between the bubble and coal surface gradually become thinner until it ruptures. By comparing the bubble attachment dynamics on three different coal surfaces, the results indicate that the bubble attachment rate on the surface with strong hydrophobicity is faster than that on the surface with weak hydrophobicity. Besides, the number of hydrogen bonds between the molecules of the wetting film is decreased with the attachment of bubbles; however, it is sharply decreased on the BC surface and slowly reduces on the LRC surface before the film rupture. At the same time, the radial distribution functions (RDFs) of hydrogen bonds in the wetting film at the moment of bubble attachment on the coal surface are analyzed, indicating that the peak intensity of the RDF decreases at the time of bubble attachment. The findings in this study may help to better comprehend the dynamics of bubble attachment, which is valuable for future design in practical applications.
ABSTRACT
Mixed surfactants have a prominent synergistic effect and show advantages in many aspects. In this work, the effects of a mixture of dodecyltrimethylammonium bromide (DTAB) and sodium dodecyl sulfate (SDS) on the flotation of low-rank coal were studied from the wetting rate, contact angle, surface tension, and zeta potential. Furthermore, the adsorption configuration of the mixed surfactant on the surface of oxygen-containing graphite was simulated at the molecular level by molecular dynamics simulation. The experimental results show that the combustible matter recovery of low-rank coal flotation is improved using the mixed surfactant, and the contact angle test and wetting rate test confirmed the synergistic effect of the mixed surfactant. In the mixed surfactant system, the addition of SDS with an opposite charge to DTAB can reduce the mutual repulsion between DTAB molecules and enhance the degree of DTAB alignment in solution, which was analyzed by surface tension and zeta potential tests. Meanwhile, the simulation results reveal the adsorption behavior of anionic and cationic surfactants on the surface of oxygen-containing graphite from the molecular level and also verify the experimental results. This investigation provides a good understanding of the interaction mechanism of mixed surfactants in low-rank coal flotation.
ABSTRACT
Conventional oily collectors cannot improve the floatability of low-rank coal because of the presence of containing-oxygen groups on the mineral surface, and the effect of the application of a single polar reagent is also limited. In this study, an innovative approach using molecular dynamics simulations to study the adsorption of mixed collectors on an oxygen-containing graphite surface was carried out. The adsorption structures of the collectors were clearly revealed, which has important implications for flotation recovery. In the simulations, when a nonpolar collector, dodecane, was used alone, it was only adsorbed on the carbon atom sites, and the hydrophilic oxygen-containing groups were not covered and remained exposed. In contrast, when a polar collector, dodecanoic acid, was used alone, the molecules self-aggregated, which reduced the surface coverage and increased the collector consumption. However, the use of a mixture of nonpolar and polar molecules resulted in a good dispersion over the mineral surface and significantly improved the coverage of oxygen-containing groups. The nonpolar molecules could be adsorbed on the oxygen-containing sites, being directed by the polar molecules, resulting in a synergistic effect. In addition, water contact angle tests show that the mixed collector can significantly improve the hydrophobicity of the low-rank coal surface, which is beneficial for improving the floatability of coal particles. Flotation tests verified the theoretical and experimental results: when the mass ratio of dodecanoic acid was 40%, the combustible matter recovery was significantly increased compared to that using a single collector. Consequently, the addition of a polar component reduces the required dosage of the traditional oily collector. This investigation provides a better understanding of the interaction mechanism of mixed collectors in low-rank coal flotation.