Controlled Deposition Number of Organic Molecules Using Quartz Crystal Microbalance Evaluated by Scanning Tunneling Microscopy Single-Molecule-Counting.

Precise control of organic molecule deposition on a substrate is quite important for fabricating single-molecule-based devices. In this study, we demonstrate whether a quartz-crystal microbalance (QCM) widely used for a film growth calibration has the ability to precisely measure the number of organic molecules adsorbed on a substrate. The well-known Sauerbrey's equation is extended to formulate the relation between QCM resonant frequency shift and the number of adsorbed molecules onto the QCM surface. The formula is examined by QCM measurements of sublimation of π-conjugated organic molecules and direct counting of the deposited molecules one by one onto metal substrates, using ultrahigh vacuum low-temperature scanning tunneling microscopy (STM). It is revealed that the number of adsorbed molecules evaluated by QCM ( NQCM) show good agreement with those counted from the STM images ( NSTM) within the error of ±25%. The results ensure the QCM capability for controlling the deposition number of organic molecules with high accuracy, that is, if one needs to deposit 100 molecules on the substrate, QCM control promises deposition of 100 ± 25 molecules.

Energy gap opening by crossing drop cast single-layer graphene nanoribbons.

Band gap opening of a single-layer graphene nanoribbon (sGNR) sitting on another sGNR, fabricated by drop casting GNR solution on Au(111) substrate in air, was studied by means of scanning tunneling microscopy and spectroscopy in an ultra-high vacuum at 78 K and 300 K. GNRs with a width of ∼45 nm were prepared by unzipping double-walled carbon nanotubes (diameter ∼15 nm) using the ultrasonic method. In contrast to atomically-flat GNRs fabricated via the bottom-up process, the drop cast sGNRs were buckled on Au(111), i.e., some local points of the sGNR are in contact with the substrate (d âˆ¼ 0.5 nm), but other parts float (d âˆ¼ 1-3 nm), where d denotes the measured distance between the sGNR and the substrate. In spite of the fact that the nanoribbons were buckled, dI/dV maps confirmed that each buckled sGNR had a metallic character (∼3.5 Go) with considerable uniform local density of states, comparable to a flat sGNR. However, when two sGNRs crossed each other, the crossed areas showed a band gap between -50 and +200 meV around the Fermi energy, i.e., the only upper sGNR electronic property changed from metallic to p-type semiconducting, which was not due to the bending, but the electronic interactions between the up and down sGNRs.

Designing 2D stripe winding network through crown-ether intermediate Ullmann coupling on Cu(111) surface.

Chemical synthesis typically yields the most thermodynamically stable ordered arrangement, a principle also governing surface synthesis on an atomically level two-dimensional (2D) surface, fostering the creation of structured 2D formations. The linear connection arising from energetically stable chemical bonding precludes the generation of a 2D random network comprised of one-dimensional (1D) convoluted stripes through on-surface synthesis. Nonetheless, we underscored that on-surface synthesis possesses the capability not solely to fashion a 2D ordered linear network but also to fabricate a winding 2D network employing a precursor with a soft ring and intermediate state bonding within the Ullmann reaction. Here, on-surface synthesis was exhibited on Cu(111) employing a 2D self-assembled monolayer array of 4,4',5,5'-tetrabromodibenzo[18]crown-6 ether (BrCR) precursors. These precursors were purposefully structured, with a crown ether ring at the core and Br atoms positioned at the head and tail ends, facilitating preferential connections along the elongated axis to foster a 1D stripe configuration. We illustrate how adjustments in the quantities of the intermediate state, serving as a primary linkage, can yield a labyrinthine, convoluted winding 2D network of stripes. The progression of growth, underlying mechanisms, and electronic structures were scrutinized using an ultrahigh vacuum low-temperature scanning tunneling microscopy and spectroscopy (STM/STS) setup combined with density functional theory (DFT) calculations. This experimental evidence opens a novel functionality in leveraging on-surface synthesis for the formation of a 2D random network. This discovery holds promise as a pioneering constituent in the construction of a ring host supramolecule, augmenting its capability to ensnare guest atoms, molecules, or ions.

Single molecule magnetoresistance with combined antiferromagnetic and ferromagnetic electrodes.

The magnetoresistance of a hydrogen-phthalocyanine molecule placed on an antiferromagnetic Mn(001) surface and contacted by a ferromagnetic Fe electrode is investigated using density functional theory based transport calculations and low-temperature scanning tunneling microscopy. A large and negative magnetoresistance ratio of ~50% is observed in combination with a high conductance. The effect originates from a lowest unoccupied molecular orbital (LUMO) doublet placed almost in resonance with the Fermi energy. As a consequence, irrespective of the mutual alignment of magnetizations, electron transport is always dominated by resonant transmission of Mn-majority charge carries going through LUMO levels.

Band-resolved Caroli-de Gennes-Matricon states of multiple-flux-quanta vortices in a multiband superconductor.

Superconductors are of type I or II depending on whether they form an Abrikosov vortex lattice. Although bulk lead (Pb) is classified as a prototypical type-I superconductor, we show that its two-band superconductivity allows for single-flux-quantum and multiple-flux-quanta vortices in the intermediate state at millikelvin temperature. Using scanning tunneling microscopy, the winding number of individual vortices is determined from the real space wave function of its Caroli-de Gennes-Matricon bound states. This generalizes the topological index theorem put forward by Volovik for isotropic electronic states to realistic electronic structures. In addition, the bound states due to the two superconducting bands of Pb can be separately detected and the two gaps close independently inside vortices. This yields strong evidence for a low interband coupling.

Carbon Monoxide Stripe Motion Driven by Correlated Lateral Hopping in a 1.4 × 1.4 Monolayer Phase on Cu(111).

We report an ultra-high-vacuum low-temperature (4.6 K) scanning tunneling microscopy study of the molecular structure and dynamics of a carbon monoxide (CO) monolayer adsorbed at 20 K on Cu(111). We observe the well-known 1.4 × 1.4 phase of CO/Cu(111) for the first time in real-space imaging. At 4.6 K, the hexagonal symmetry of the monolayer is locally broken by the formation of stripes made of single and double CO rows of different apparent heights. Using density functional theory calculations, we assign the high rows to CO molecules adsorbed mostly at off-center top sites and the low rows to bridge sites. Groups of three or four very high molecules appear randomly and are assigned to nearest-neighbor, titled top site molecules. We observe simultaneous hopping of a few CO molecules between adjacent top and bridge sites, which produces the apparent motion of the stripe pattern.

Fabrication of tungsten tip probes within 3 s by using flame etching.

A tungsten (W) tip has been used as a standard tip probe because of its robustness at the highest boiling temperature; the use cases include a field emission (FE) electron source for scanning electron microscopy (SEM) and a scanning probe microscopy tip. The W tip probe has generally been fabricated through a chemical etching process with aqueous solutions. In this study, we propose a new method-flame etching. Without using aqueous solutions, a W tip probe was successfully fabricated within 3 s in air, which is very fast and convenient, and beneficial for mass production (additionally, no expensive setup is necessary). A W tip probe was obtained simply by putting a W wire into an oxygen-liquefied petroleum (O2+LP) gas flame (giving the highest temperature of ∼2300 K) through a microtorch for a few seconds. The obtained W tip provided atomically resolved scanning tunneling microscopic images. Also, since FE electrons were detected by applying ∼106 V/m, the tip can be used as an FE-SEM source. Generation and vaporization of WO3 on the W surface are important processes to form a tip shape.

Room temperature stable film formation of π-conjugated organic molecules on 3d magnetic substrate.

An important step toward molecule-based electronics is to realize a robust and well-ordered molecular network at room temperature. To this end, one key challenge is tuning the molecule-substrate electronic interactions that influence not only the molecular selfassembly but also the stability of the resulting structures. In this study, we investigate the film formation of π-conjugated metal-free phthalocyanine molecules on a 3d-bcc-Fe(001) whisker substrate at 300 K by using ultra-high-vacuum scanning tunneling microscopy. On bare Fe(001), hybridization between the molecular π and the Fe(001) d-states prevents the molecular assembly, resulting in the disordered patchy structures. The second- and third-layer molecules form densely packed films, while the morphologies show clear difference. The second-layer molecules partially form p(5 × 5)-ordered films with the rectangular edges aligned along the [100] and [010] directions, while the edges of the third-layer films are rounded. Remarkably, such film morphologies are stable even at 300 K. These findings suggest that the molecular self-assembly and the resulting morphologies in the second and third layers are affected by the substrate bcc(001), despite that the Fe-d states hybridize only with the first-layer molecules. The possible mechanism is discussed with the kinetic Monte Carlo simulation.

Method for Controlling Electrical Properties of Single-Layer Graphene Nanoribbons via Adsorbed Planar Molecular Nanoparticles.

A simple method for fabricating single-layer graphene nanoribbons (sGNRs) from double-walled carbon nanotubes (DWNTs) was developed. A sonication treatment was employed to unzip the DWNTs by inducing defects in them through annealing at 500 °C. The unzipped DWNTs yielded double-layered GNRs (dGNRs). Further sonication allowed each dGNR to be unpeeled into two sGNRs. Purification performed using a high-speed centrifuge ensured that more than 99% of the formed GNRs were sGNRs. The changes induced in the electrical properties of the obtained sGNR by the absorption of nanoparticles of planar molecule, naphthalenediimide (NDI), were investigated. The shape of the I-V curve of the sGNRs varied with the number of NDI nanoparticles adsorbed. This was suggestive of the existence of a band gap at the narrow-necked part near the NDI-adsorbing area of the sGNRs.

Robust spin crossover and memristance across a single molecule.

A nanoscale molecular switch can be used to store information in a single molecule. Although the switching process can be detected electrically in the form of a change in the molecule's conductance, adding spin functionality to molecular switches is a key concept for realizing molecular spintronic devices. Here we show that iron-based spin-crossover molecules can be individually and reproducibly switched between a combined high-spin, high-conduction state and a low-spin, low-conduction state, provided the individual molecule is decoupled from a metallic substrate by a thin insulating layer. These results represent a step to achieving combined spin and conduction switching functionality on the level of individual molecules.