ABSTRACT
As the electron mobility of two-dimensional (2D) materials is dependent on an insulating substrate, the nonuniform surface charge and morphology of silicon dioxide (SiO2) layers degrade the electron mobility of 2D materials. Here, we demonstrate that an atomically thin single-crystal insulating layer of silicon oxynitride (SiON) can be grown epitaxially on a SiC wafer at a wafer scale and find that the electron mobility of graphene field-effect transistors on the SiON layer is 1.5 times higher than that of graphene field-effect transistors on typical SiO2 films. Microscale and nanoscale void defects caused by heterostructure growth were eliminated for the wafer-scale growth of the single-crystal SiON layer. The single-crystal SiON layer can be grown on a SiC wafer with a single thermal process. This simple fabrication process, compatible with commercial semiconductor fabrication processes, makes the layer an excellent replacement for the SiO2/Si wafer.
ABSTRACT
Understanding the interplay between the surface structure and the passivation materials and their effects associated with surface structure modification is of fundamental importance; however, it remains an unsolved problem in the perovskite passivation field. Here, we report a surface passivation principle for efficient perovskite solar cells via a facet-dependent passivation phenomenon. The passivation process selectively occurs on facets, which is observed with various post-treatment materials with different functionality, and the atomic arrangements of the facets determine the alignments of the passivation layers. The profound understanding of facet-dependent passivation leads to the finding of 2-amidinopyridine hydroiodide as the material for a uniform and effective passivation on both (100) and (111) facets. Consequently, we achieved perovskite solar cells with an efficiency of 25.10% and enhanced stability. The concept of facet-dependent passivation can provide an important clue on unidentified passivation principles for perovskite materials and a novel means to enhance the performance and stability of perovskite-based devices.
ABSTRACT
In situ liquid cell transmission electron microscopy (TEM) is a very useful tool for investigating dynamic solidliquid reactions. However, there are challenges to observe the early stages of spontaneous solidliquid reactions using a closed-type liquid cell system, the most popular and simple liquid cell system. We propose a graphene encapsulation method to overcome this limitation of closed-type liquid cell TEM. The solid and liquid are separated using graphene to suspend the reaction until the graphene layer is destroyed. Graphene can be decomposed by the high-energy electron beam used in TEM, allowing the reaction to proceed. Fast dissolution of graphene-capped copper nanoparticles in an FeCl3 solution was demonstrated via in situ liquid cell TEM at 300 kV using a cell with closed-type SiNx windows.
ABSTRACT
While the orientation-dependent properties of semiconductor nanowires have been theoretically predicted, their study has long been overlooked in many fields owing to the limits to controlling the crystallographic growth direction of nanowires (NWs). We present here the orientation-controlled growth of single-crystalline germanium (Ge) NWs using a self-catalytic low-pressure chemical vapor deposition process. By adjusting the growth temperature, the orientation of growth direction in GeNWs was selectively controlled to the ⟨110⟩, ⟨112⟩, or ⟨111⟩ directions on the same substrate. The NWs with different growth directions exhibit distinct morphological features, allowing control of the NW morphology from uniform NWs to nanoribbon structures. Significantly, the VLS-based self-catalytic growth of the ⟨111⟩ oriented GeNW suggests that NW growth is possible for single elementary materials even without an appropriate external catalyst. Furthermore, these findings could provide opportunities to investigate the orientation-dependent properties of semiconductor NWs.
ABSTRACT
The metallic 1T phase of WS2 (1T-WS2 ), which boosts the charge transfer between the electron source and active edge sites, can be used as an efficient electrocatalyst for the hydrogen evolution reaction (HER). As the semiconductor 2H phase of WS2 (2H-WS2 ) is inherently stable, methods for synthesizing 1T-WS2 are limited and complicated. Herein, a uniform wafer-scale 1T-WS2 film is prepared using a plasma-enhanced chemical vapor deposition (PE-CVD) system. The growth temperature is maintained at 150 °C enabling the direct synthesis of 1T-WS2 films on both rigid dielectric and flexible polymer substrates. Both the crystallinity and number of layers of the as-grown 1T-WS2 are verified by various spectroscopic and microscopic analyses. A distorted 1T structure with a 2a0 × a0 superlattice is observed using scanning transmission electron microscopy. An electrochemical analysis of the 1T-WS2 film demonstrates its similar catalytic activity and high durability as compared to those of previously reported untreated and planar 1T-WS2 films synthesized with CVD and hydrothermal methods. The 1T-WS2 does not transform to stable 2H-WS2 , even after a 700 h exposure to harsh catalytic conditions and 1000 cycles of HERs. This synthetic strategy can provide a facile method to synthesize uniform 1T-phase 2D materials for electrocatalysis applications.
ABSTRACT
The preparation of transmission electron microscopy (TEM) samples from powders is quite difficult and challenging. For powders with particles in the 1-5 µm size range, it is especially difficult to select an adequate sample preparation technique. Epoxy is commonly used to bind powder, but drawbacks, such as differential milling originating from unequal milling rates between the epoxy and powder, remain. We propose a new, simple method for preparing TEM samples. This method is especially useful for powders with particles in the 1-5 µm size range that are vulnerable to oxidation. The method uses solder as an embedding agent together with focused ion beam (FIB) milling. The powder was embedded in low-temperature solder using a conventional hot-mounting instrument. Subsequently, FIB was used to fabricate thin TEM samples via the lift-out technique. The solder proved to be more effective than epoxy in producing thin TEM samples with large areas. The problem of differential milling was mitigated, and the solder binder was more stable than epoxy under an electron beam. This methodology can be applied for preparing TEM samples from various powders that are either vulnerable to oxidation or composed of high atomic number elements.
ABSTRACT
We demonstrate silicon germanium (SiGe) alloy nanowires (NWs) with Ge nanoparticles (GeNPs) embedded in a SiO2 shell as a material for decreasing thermal conductivity. During thermal oxidation of SiGe NWs to form SiGe-SiO2 core-shell structures, Ge atoms were diffused into the SiO2 shell to relax the strain in the SiGe core, and agglomerated as a few nanometer-sized particles. This structure leads to a large reduction in thermal conductivity due to the GeNP-phonon interaction, while electrical conductivity is sustained because the core of the SiGe alloy NW provides a current path for the charged carriers. The thermal conductivity of the SiGe alloy NWs wrapped with a GeNP-embedded SiO2 shell is 0.41 W m(-1) K(-1) at 300 K.
ABSTRACT
Vertical and lateral heterogeneous structures of two-dimensional (2D) materials have paved the way for pioneering studies on the physics and applications of 2D materials. A hybridized hexagonal boron nitride (h-BN) and graphene lateral structure, a heterogeneous 2D structure, has been fabricated on single-crystal metals or metal foils by chemical vapor deposition (CVD). However, once fabricated on metals, the h-BN/graphene lateral structures require an additional transfer process for device applications, as reported for CVD graphene grown on metal foils. Here, we demonstrate that a single-crystal h-BN/graphene lateral structure can be epitaxially grown on a wide-gap semiconductor, SiC(0001). First, a single-crystal h-BN layer with the same orientation as bulk SiC was grown on a Si-terminated SiC substrate at 850 °C using borazine molecules. Second, when heated above 1150 °C in vacuum, the h-BN layer was partially removed and, subsequently, replaced with graphene domains. Interestingly, these graphene domains possess the same orientation as the h-BN layer, resulting in a single-crystal h-BN/graphene lateral structure on a whole sample area. For temperatures above 1600 °C, the single-crystal h-BN layer was completely replaced by the single-crystal graphene layer. The crystalline structure, electronic band structure, and atomic structure of the h-BN/graphene lateral structure were studied by using low energy electron diffraction, angle-resolved photoemission spectroscopy, and scanning tunneling microscopy, respectively. The h-BN/graphene lateral structure fabricated on a wide-gap semiconductor substrate can be directly applied to devices without a further transfer process, as reported for epitaxial graphene on a SiC substrate.
ABSTRACT
Two dimensional (2D) semiconductors have attracted attention for a range of electronic applications, such as transparent, flexible field effect transistors and sensors owing to their good optical transparency and mechanical flexibility. Efforts to exploit 2D semiconductors in electronics are hampered, however, by the lack of efficient methods for their synthesis at levels of quality, uniformity, and reliability needed for practical applications. Here, as an alternative 2D semiconductor, we study single crystal Si nanomembranes (NMs), formed in large area sheets with precisely defined thicknesses ranging from 1.4 to 10 nm. These Si NMs exhibit electronic properties of two-dimensional quantum wells and offer exceptionally high optical transparency and low flexural rigidity. Deterministic assembly techniques allow integration of these materials into unusual device architectures, including field effect transistors with total thicknesses of less than 12 nm, for potential use in transparent, flexible, and stretchable forms of electronics.
ABSTRACT
Herein, a high-quality gate stack (native HfO2 formed on 2D HfSe2) fabricated via plasma oxidation is reported, realizing an atomically sharp interface with a suppressed interface trap density (Dit ≈ 5 × 1010 cm-2 eV-1). The chemically converted HfO2 exhibits dielectric constant, κ ≈ 23, resulting in low gate leakage current (≈10-3 A cm-2) at equivalent oxide thickness ≈0.5 nm. Density functional calculations indicate that the atomistic mechanism for achieving a high-quality interface is the possibility of O atoms replacing the Se atoms of the interfacial HfSe2 layer without a substitution energy barrier, allowing layer-by-layer oxidation to proceed. The field-effect-transistor-fabricated HfO2/HfSe2 gate stack demonstrates an almost ideal subthreshold slope (SS) of ≈61 mV dec-1 (over four orders of IDS) at room temperature (300 K), along with a high Ion/Ioff ratio of ≈108 and a small hysteresis of ≈10 mV. Furthermore, by utilizing a device architecture with separately controlled HfO2/HfSe2 gate stack and channel structures, an impact ionization field-effect transistor is fabricated that exhibits n-type steep-switching characteristics with a SS value of 3.43 mV dec-1 at room temperature, overcoming the Boltzmann limit. These results provide a significant step toward the realization of post-Si semiconducting devices for future energy-efficient data-centric computing electronics.
ABSTRACT
Excellent mechanical properties of carbon nanotubes (CNTs) make them ideal reinforcements for synthesizing light weight, high strength metal matrix composite. Aluminum is attractive matrix due to its light weight and Al/CNT composites are promising materials for various industrial applications. Powder metallurgy and casting techniques are normally used for bulk fabrications of composites. Casting process which can mass-produce delicate product is more suitable than existing powder metallurgy in view point of application in industries. In CNT-metal matrix composites, however, composite bulk fabrication has been limited because of the large density gap and poor wettability between the metal and CNTs. This study suggests a method for alleviating such problems. It was found that the wettability between aluminum and CNT could be enhanced by functionalizing the CNTs with nickel oxide. This functionalization of CNTs with heavier element also reduces the density gap between the matrix and reinforcements. It is suggested that this method could possibly be used in a casting process to enable mass fabrication of CNT-metal matrix composites.
Subject(s)
Aluminum/chemistry , Crystallization/methods , Nanotubes, Carbon/chemistry , Nanotubes, Carbon/ultrastructure , Nickel/chemistry , Macromolecular Substances/chemistry , Materials Testing , Molecular Conformation , Particle Size , Surface Properties , WettabilityABSTRACT
The ordered L12-type Al3Ti-(8, 10, 15)% Cr intermetallic compounds, namely, Al67Ti25Cr8, Al66Ti24Cr10, and Al59Ti26Cr15, were prepared by induction melting followed by thermomechanical treatment. Their microstructure, compositional variation, and crystal structure were characterized using X-ray diffraction, optical microscopy, and scanning and transmission electron microscopy equipped with energy-dispersive spectroscopy. The Al67Ti25Cr8 alloy consisted of the L12-Al3Ti matrix and precipitates of α2-Ti3Al, D022-Al3Ti, and γ-TiAl. The Al66Ti24Cr10 and Al59Ti26Cr15 alloys consisted of the L12-Al3Ti matrix and grains of α-TiAl and ß-Cr.
ABSTRACT
The dislocation distribution of high-quality single-crystal gallium nitride (GaN) films grown by the hybrid vapor phase epitaxy was analyzed. This study examined the domain structure of GaN from the dislocation distribution on the macroscale by optical microscopy. The surface structure of GaN consisted of domains with microcolumns as the substructure. The inner domains contained a lower density of dislocations but a large number of these dislocations were observed along the domain boundaries. The existence of a domain boundary structure doubly increased the total dislocation density.
ABSTRACT
The oxidation mechanism and thermal stability of nickel oxide (NiO)/carbon nanotube (CNT) composites were investigated by examining composites with different NiO contents by thermogravimetric analysis and transmission electron microscopy (TEM). NiO acts as a catalyst in the oxidation of CNT in the composite. CNTs can be oxidized, even in a vacuum, by reducing NiO to nickel at temperatures lower than the normal oxidation temperature of CNTs. This phase transition was confirmed directly by in situ heating TEM observations. In air, reduction by CNT occurs simultaneously with reoxidation by gaseous O2 molecules, and NiO maintains its phase. The thermal stability decreased with increasing NiO content because of defects in the CNT generated by the NiO loading.
ABSTRACT
Distribution of wax in laser printer toner was observed using an ultra-high-voltage (UHV) and a medium-voltage transmission electron microscope (TEM). As the radius of the wax spans a hundred to greater than a thousand nanometers, its three-dimensional recognition via TEM requires large depth of focus (DOF) for a volumetric specimen. A tomogram with a series of the captured images would allow the determination of their spatial distribution. In this study, bright-field (BF) images acquired with UHV-TEM at a high tilt angle prevented the construction of the tomogram. Conversely, the Z-contrast images acquired by the medium-voltage TEM produced a successful tomogram. The spatial resolution for both is discussed, illustrating that the image degradation was primarily caused by beam divergence of the Z-contrast image and the combination of DOF and chromatic aberration of the BF image from the UHV-TEM.
ABSTRACT
The formation and morphological evolution of germanides formed in a ternary Ni/Ta-interlayer/Ge system were examined by ex situ and in situ annealing experiments. The Ni germanide film formed in the Ni/Ta-interlayer/Ge system maintained continuity up to 550°C, whereas agglomeration of the Ni germanide occurred in the Ni/Ge system without Ta-interlayer. Through microstructural and chemical analysis of the Ni/Ta-interlayer/Ge system during and after in situ annealing in a transmission electron microscope, it was confirmed that the Ta atoms remained uniformly on the top of the newly formed Ni germanide layer during the diffusion reaction. Consequently, the agglomeration of the Ni germanide film was retarded and the thermal stability was improved by the Ta incorporation.
ABSTRACT
Surface undulation was formed while growing InGaN/GaN multi-quantum wells on a semi-polar m-plane (1-100) sapphire substrate. Two distinct facets, parallel to 112¯2 and 011¯1, were formed in the embedded multi-quantum wells (MQWs). The structural and luminescence characteristics of the two facets were investigated using transmission electron microscopy equipped with cathodoluminescence. Those well-defined quantum wells, parallel and slanted to the growth plane, showed distinct differences in indium incorporation from both the X-ray yield and the contrast difference in annular darkfield images. Quantitative measurements of concentration in 011¯1 MQWs show an approximately 4 at% higher indium incorporation compared to the corresponding 112¯2 when the MQWs were formed under the same growth condition.
ABSTRACT
Using a monochromator in transmission electron microscopy, a low-energy-loss spectrum can provide inter- and intra-band transition information for nanoscale devices with high energy and spatial resolutions. However, some losses, such as Cherenkov radiation, phonon scattering, and surface plasmon resonance superimposed at zero-loss peak, make it asymmetric. These pose limitations to the direct interpretation of optical properties, such as complex dielectric function and bandgap onset in the raw electron energy-loss spectra. This study demonstrates measuring the dielectric function of germanium telluride using an off-axis electron energy-loss spectroscopy method. The interband transition from the measured complex dielectric function agrees with the calculated band structure of germanium telluride. In addition, we compare the zero-loss subtraction models and propose a reliable routine for bandgap measurement from raw valence electron energy-loss spectra. Using the proposed method, the direct bandgap of germanium telluride thin film was measured from the low-energy-loss spectrum in transmission electron microscopy. The result is in good agreement with the bandgap energy measured using an optical method.
ABSTRACT
Reversible conversion over multimillion times in bond types between metavalent and covalent bonds becomes one of the most promising bases for universal memory. As the conversions have been found in metastable states, an extended category of crystal structures from stable states via redistribution of vacancies, research on kinetic behavior of the vacancies is highly in demand. However, it remains lacking due to difficulties with experimental analysis. Herein, the direct observation of the evolution of chemical states of vacancies clarifies the behavior by combining analysis on charge density distribution, electrical conductivity, and crystal structures. Site-switching of vacancies of Sb2Te3 gradually occurs with diverged energy barriers owing to their own activation code: the accumulation of vacancies triggers spontaneous gliding along atomic planes to relieve electrostatic repulsion. Studies on the behavior can be further applied to multiphase superlattices composed of Sb2Te3 (2D) and GeTe (3D) sublayers, which represent superior memory performances, but their operating mechanisms were still under debate due to their complexity. The site-switching is favorable (suppressed) when Te-Te bonds are formed as physisorption (chemisorption) over the interface between Sb2Te3 (2D) and GeTe (3D) sublayers driven by configurational entropic gain (electrostatic enthalpic loss). Depending on the type of interfaces between sublayers, phases of the superlattices are classified into metastable and stable states, where the conversion could only be achieved in the metastable state. From this comprehensive understanding on the operating mechanism via kinetic behaviors of vacancies and the metastability, further studies toward vacancy engineering are expected in versatile materials.
ABSTRACT
Microwave treatment of multi-walled carbon nanotubes (MWCNTs) with nitric acid (HNO3) and 0.2 M sodium chlorate (NaClO3) can generate and enhance defects on the surfaces of MWCNTs. These defects are the important sites to load Pt nanoparticles (NPs). We investigated the defect induced Raman spectra and observed a decrease in the R-values (D-band/G-band peak ratio) and a slight up-shift of the both peaks as the amount of loaded Pt NPs increased. Using the Brunauer-Emmett-Teller (BET) method, we observed that the pore size distribution and the pore volume changed according to the amount of Pt NPs loaded. Fewer micropores and mesopores were observed on MWCNTs loaded with Pt NPs. Based on the pore size distribution calculated from the BET results, Pt NPs loaded mainly on pores/defects with a size of 2-8 nm. Transmission electron microscopy and Raman spectroscopy results confirmed that most well-crystallized Pt NPs loaded on the surface defect sites and pores spontaneously through the exchange of electrons between Pt and C atoms.