Water-induced fluorescence enhancement of lead-free cesium bismuth halide quantum dots by 130% for stable white light-emitting devices.

Recently, the discovery and development of lead-free perovskite quantum dots (QDs) that are eco-friendly and stable has become an active research area in low-cost lighting and display fields. However, the low photoluminescence quantum yield (PLQY) caused by the residual surface states of such QDs severely hinders their practical applications and commercialization. In this work, a strategy of employing water-induced nanocomposites was proposed to improve the PLQY of cesium bismuth halide (Cs3Bi2X9) QDs, and a substantial enhancement by ∼130% (from 20.2% to 46.4%) was achieved by an optimized water treatment of Cs3Bi2Br9 QDs. A detailed analysis indicated that Cs3Bi2Br9/BiOBr nanocomposites, in which the Cs3Bi2Br9 QD core was encapsulated into a BiOBr matrix, can effectively suppress the surface defects of QDs, resulting in a longer PL lifetime and a larger exciton binding energy compared with the pristine sample. Finally, the Cs3Bi2Br9/BiOBr nanocomposites were used as the color-converting phosphors for down-conversion white light-emitting devices, which show a good operation stability in ambient air, significantly better than the reference device constructed with conventional lead-halide perovskites. We believe that the method used here provides an effective strategy to improve the fluorescence efficiency of lead-free perovskite QDs, which will create opportunities for their applications in lighting and displays.

Water-induced MAPbBr3@PbBr(OH) with enhanced luminescence and stability.

Poor stability has long been one of the key issues that hinder the practical applications of lead-based halide perovskites. In this paper, the photoluminescence (PL) quantum yield (QY) of bromide-based perovskites can be increased from 2.5% to 71.54% by introducing water, and the PL QY of a sample in aqueous solution decreases minimally over 1 year. The enhanced stability and PL QY can be attributed to the water-induced methylamino lead bromide perovskite (MAPbBr3)@PbBr(OH). We note that this strategy is universal to MAPbBr3, formamidine lead bromide perovskite (FAPbBr3), inorganic lead bromide perovskite (CsPbBr3), etc. Light-emitting devices (LEDs) are fabricated by using the as-prepared perovskite as phosphors on a 365 nm UV chip. The luminance intensity of the LED is 9549 cd/m2 when the driven current is 200 mA, and blemishes on the surface of glass are clearly observed under the illumination of the LEDs. This work provides a new strategy for highly stable and efficient perovskites.