ABSTRACT
Single particle collision is an important tool for size analysis at the individual particle level; however, due to complex dynamic behaviors of nanoparticles on the surface of an electrode, the accuracy of size discrimination is limited. A silver (Ag) nanoparticle (NP) was chosen as the research target, and the dynamic behavior of Ag NPs was simplified by enhancing adsorption between Ag NP and Au ultramicroelectrode (UME) in alkaline media. Immediately after, accurate dynamic and thermodynamic information on single Ag NP was accurately extracted from collision events, including current intensity, transferred charge, and duration time. On the basis that there were differences between parameters of different-sized Ag NPs, multiparameter size discrimination was proposed, which improved the accuracy compared to single-parameter discrimination. More intriguingly, multiparameter analysis was combined with artificial intelligence, a tool adept at processing multidimensional data, for the first time. Finally, artificial intelligence-assisted multiparameter size discrimination was successfully used to intelligently distinguish mixed Ag NPs, with an optimal accuracy of more than 95%. To sum up, the artificial intelligence-assisted multiparameter method showed an excellent ability to quickly achieve the most accurate size discrimination of nanoparticles at the level of individual particle and provide an effective guidance for the application of nanoparticles.
ABSTRACT
In situ monitoring of the agglomeration/aggregation process of nanoparticles (NPs) is crucial because it seriously affects cell entry, biosafety, catalytic performance of NPs, and so on. Nevertheless, it remains hard to monitor the solution phase agglomeration/aggregation of NPs via conventional techniques such as electron microscopy, which requires sample pretreatment and cannot represent native state NPs in solution. Considering that single-nanoparticle electrochemical collision (SNEC) is powerful to detect NPs in solution at the single-particle level, and the current lifetime, which refers to the time that current intensity decays to 1/e of the original value, is skilled in distinguishing different sized NPs, herein, a current lifetime-based SNEC has been developed to distinguish a single Au NP (d = 18 nm) from its agglomeration/aggregation. Based on this, the agglomeration/aggregation process of small-sized NPs and the discrimination of agglomeration vs aggregation have been carefully investigated at the single-particle level. Results showed that the agglomeration/aggregation of Au NPs (d = 18 nm) in 0.8 mM HClO4 climbed from 19% to 69% over two hours, whereas there was no visible granular sediment, and Au NPs tended to agglomerate rather than aggregate irreversibly under normal conditions. Hence, the proposed current lifetime-based SNEC could serve as a complementary method to in situ monitor the agglomeration/aggregation of small-sized NPs in solution at the single-particle level and provide effective guidance for the practical application of NPs.
ABSTRACT
Accurate size analysis of nanoparticles (NPs) is vital for nanotechnology. However, this cannot be realized based on conventional single-nanoparticle collision (SNC) because the current intensity, a thermodynamic parameter of SNC for sizing NPs, is always smaller than the theoretical value due to the effect of NP movements on the electrode surface. Herein, a size-dependent dynamic parameter of SNC, current lifetime, which refers to the time that the current intensity decays to 1/e of the original value, was originally utilized to distinguish differently sized NPs. Results showed that the current lifetime increased with NP size. After taking the current lifetime into account rather than the current intensity, the overlap rates for the peak-type current transients of differently sized Pt NPs (10 and 15 nm) and Au NPs (18 and 35 nm) reduced from 73 and 7% to 45 and 0%, respectively, which were closer to the theoretical values (29 and 0%). Hence, the proposed SNC dynamics-based method holds great potential for developing reliable electrochemical approaches to evaluate NP sizes accurately.
Subject(s)
Metal Nanoparticles , Nanoparticles , Electrodes , NanotechnologyABSTRACT
Single-nanoparticle collision electrochemistry (SNCE) has gradually become an attractive analytical method due to its advantages in analytical detection, such as a fast response, low cost, low sample consumption, and in situ real-time detection of analytes. However, the biological analyte's direct detection based on the SNCE blocking mode has the problems of low sensitivity and specificity. In this work, an SNCE biosensor based on SNCE electrocatalytic strategy was used for the detection of H7N9 AIV. Nucleic acid aptamers were introduced to recognize the target virus (H7N9 AIV). After the recognition event, ssDNA1 was released and hybridized with another ssDNA2. Owing to the nicking endonuclease Nt.AlwI-mediated target nucleic acid cyclic amplification, one virus particle can indirectly induce the release of 4.2 × 106 Au NPs that can be counted by the SNCE electrocatalytic strategy. The high conversion efficiency greatly improved the detection sensitivity, and the detection limit was as low as 24.3 fg/mL. Therefore, the constructed biosensor can achieve a highly sensitive and specific detection of H7N9 AIV and show a great potential in bioanalytical application.
Subject(s)
Biosensing Techniques , Influenza A Virus, H7N9 Subtype , Influenza in Birds , Nanoparticles , Nucleic Acids , Animals , Biosensing Techniques/methods , ElectrochemistryABSTRACT
An ultrasensitive electrochemiluminescence (ECL) biosensor was proposed based on a closed bipolar electrode (BPE) for the detection of alkaline phosphatase (ALP). For most of the BPE-ECL biosensors, an effective signal amplification strategy was the key to enhance the sensitivity of the system. Herein, the signal amplification strategy of the enzyme catalysis was utilized in the BPE-ECL system. Au nanoparticles (NPs) were electrodeposited on the cathode surface of the ITO electrode to improve the stability and sensitivity of the signal. Compared with the previous BPE-ECL biosensors, the sensitivity was increased by at least 3 orders of magnitude. The biosensor showed high sensitivity and specificity of ALP detection with a detection limit of as low as 3.7 aM. Besides, it was further applied to the detection of ALP in different types of cells and successfully realized ALP detection in single Hep G2 cell, which had a huge application prospect in single biomolecule detection or single cell analysis.
Subject(s)
Alkaline Phosphatase/analysis , Biosensing Techniques , Electrochemical Techniques , Luminescent Measurements , Single-Cell Analysis , Alkaline Phosphatase/metabolism , Electrodes , Gold/chemistry , Hep G2 Cells , Humans , Metal Nanoparticles/chemistryABSTRACT
Limited to the accuracy of size resolution, single entity collision biosensing (SECBS) for multiplex immunoassays remains challenging, because it is difficult to get the true value of nanoparticle (NP) sizes based on the current intensity due to the complex movement of NPs on the electrode surface. Considering that the size-dependent movement of NPs meanwhile will generate a characteristic current shape, in this work, the huge difference in the current rise time of 5 and 15 nm Pt NPs colliding on an Au ultramicroelectrode (d = 30 µm) was originally used to develop a size-resolved SECBS for multiplex immunoassays of miRNAs. The limit concentration that can be detected was 0.5 fM. Compared with conventional electrochemical biosensors for multiplex immunoassays, for the size-resolved SECBS, one does not need to worry about potential overlapping. Therefore, the proposed method demonstrates a promising potential for the application of SECBS in multiplex immunoassays.
Subject(s)
Biosensing Techniques/methods , MicroRNAs/analysis , Electrochemical Techniques/methods , Feasibility Studies , Immunoassay/methods , Limit of Detection , Metal Nanoparticles/chemistry , MicroRNAs/blood , Nucleic Acid Amplification Techniques/methodsABSTRACT
A facile, economical and one-step hydrothermal method was used to synthesize fluorescent carbon dots by utilizing citric acid as carbon source and phenylalanine to provide nitrogen. The as-prepared fluorescence carbon dots had strong blue light emission around 440 nm. As confirmed by UVvis absorption, X-ray photoelectron spectroscopic, Fourier transform infrared spectroscopy and transmission electron microscope characterization, the carbon dots were small and very stable in water for using as a fluorescent probe. It was also found that the fluorescence of the carbon dots could be quenched in the presence of Fe3+ ions, and the quenching rate was linear with the concentration of Fe3+ ions. We here proposed a static quenching mechanism about the fluorescence of the Phe-CDs could be selectively quenched by Fe3+ ions, which was because these Fe3+ ions could easily combine with the hydroxyl or carboxyl groups on the surface of Phe-CDs and induced aggregation. In addition, the pH had little effect on the fluorescence intensity of the Phe-CDs and maintained excellent fluorescence intensity even under extreme pH value conditions and could be used for the detection of Fe3+ ions. We have demonstrated that the method using the carbon dots for Fe3+ ions detection was rapid, reliable, and selective with a detection limit as low as 0.720 µM and a dynamic range from 5.0 to 500.0 µM. Moreover, the results of determination Fe3+ ions in tap water samples indicated that the presented method has potential for practical application in environmental metal analysis.