Can C1 lateral mass and C3 pedicle screw fixation be used as an option for atlantoaxial reduction and stabilization in Klippel-Feil patients? A study of its morphological feasibility, technical nuances, and clinical efficiency.

In Klippel-Feil patients with atlantoaxial dislocation, narrow C2 pedicles are often encountered preventing pedicle screw placement. Alternative techniques, including translaminar screws, pars screws, and inferior process screws could not achieve 3-column rigid fixation, and have shown inferior biomechanical stability. The present study aimed to evaluate the feasibility, safety, and efficacy of C3 pedicle screws (C3PSs) as an option for atlantoaxial stabilization in Klippel-Feil patients, and to introduce a freehand technique, the "medial sliding technique," for safe and accurate C3PS insertion. Thirty-seven Klippel-Feil patients with congenital C2-3 fusion who have received atlantoaxial fixation were reviewed. Preoperative CT and CT angiography were acquired to evaluate the feasibility of C3PS placement. C1 lateral mass and C3PS constructs were used for atlantoaxial stabilization. The "medial sliding technique" was introduced to facilitate C3PS insertion. Clinical outcomes and complications were evaluated, and screw accuracy was graded on postoperative CT scans. Morphological measurements showed that more than 80% C3 pedicles could accommodate a 3.5-mm screw. Fifty-eight C3PSs were placed in 33/37 patients using the medial sliding technique. Overall, 96.7% screws were considered safe and there was no related neurovascular complications; 27/33 patients exhibited neurological improvement and 30/33 patients had a solid bone fusion at an average 19.3-month follow-up. Therefore, the C3PS was a feasible option for atlantoaxial fixation in Klippel-Feil patients. The clinically efficiency of C3PS was satisfied with high fusion rates and low complications. The medial sliding technique we used could facilitate safe and accurate placement of C3PSs in Klippel-Feil patients with fused C2-3 vertebra.

A novel surgical protocol for safe and accurate placement of C1 lateral mass screws in patients with atlas assimilation, basilar invagination and atlantoaxial instability: technical details, accuracy assessment and perioperative complications.

PURPOSE: To introduce a novel surgical protocol for safe and accurate placement of C1 lateral mass screws in patients with atlas assimilation, basilar invagination and atlantoaxial instability, and to categorize the screw accuracy and perioperative complications regarding this technique in a large case series. METHODS: Between January 2015 and January 2020, patients who had atlas assimilation, basilar invagination and atlantoaxial instability, and underwent atlantoaxial fixation using C1 lateral mass screws were reviewed. C1 lateral mass screws were placed with a novel surgical protocol following a series key steps, including posterior para-odontoid ligament release, panoramic exposure of the invaginated lateral mass, and diligent protection of the abnormal VA. Screw accuracy and related complications were specifically evaluated. RESULTS: A total of 434 C1 lateral mass screws were placed. Fifteen screws (3.5%) were classified as unacceptable, 54 screws (12.4%) were classified as acceptable, and 365 screws (84.1%) were classified as ideal. Overall, 96.5% of screws were deemed safe. There were no cases of vascular injury or permanent neurological defects. One patient with an unacceptable screw presented with hypoglossal nerve paralysis and recovered after an immediate revision surgery. Thirty-seven patients complained about occipital neuralgia and were successfully managed with medication. CONCLUSION: Placement of C1 lateral mass screws in patients with atlas assimilation, basilar invagination and atlantoaxial instability following this surgical protocol is safe and accurate. Thorough para-odontoid ligamental release, wide exposure of the invaginated lateral mass, and diligent protection of the vertebral artery are critical to maximize the chances of successful screw placement.

Feasibility of occipital condyle screw placement in patients with Chiari malformation type I: a computed tomography-based morphometric study.

BACKGROUND: The occipital condyle (OC) screw is an alternative technique for occipitocervical fixation that is especially suitable for revision surgery in patients with Chiari malformation type I (CMI). This study aimed to investigate the feasibility and safety of this technique in patients with CMI. METHODS: The CT data of 73 CMI patients and 73 healthy controls were retrospectively analyzed. The dimensions of OCs, including length, width, height, sagittal angle, and screw length, were measured in the axial, sagittal, and coronal planes using CT images. The OC available height was measured in the reconstructed oblique parasagittal plane of the trajectory. RESULTS: The mean length, width, and height of OCs in CMI patients were 17.79 ± 2.31 mm, 11.20 ± 1.28 mm, and 5.87 ± 1.29 mm, respectively. All OC dimensions were significantly smaller in CMI patients compared with healthy controls. The mean screw length and sagittal angle were 19.13 ± 1.97 mm and 33.94° ± 5.43°, respectively. The mean OC available height was 6.36 ± 1.59 mm. According to criteria based on OC available height and width, 52.1% (76/146) of OCs in CMI patients could safely accommodate a 3.5-mm-diameter screw. CONCLUSIONS: The OC screw is feasible in approximately half of OCs in CMI patients. Careful morphometric analyses and personalized surgical plans are necessary for the success of this operation in CMI patients.

[The Analysis of Microcavity-Integrated Graphene Photodetector's SNR Based on 1.06 µm].

Avalanche photodiode is widely used in laser rangefinder due to high gain characteristics, but introduces highly additive noise during the time of current's multiplication that makes laser rangefinder's SNR meet bottleneck. This paper proposes a method of designing a high SNR's graphene photodetector based on microcavity. The graphene's unique optoelectronic properties make it an ideal platform for a variety of photonic applications, such as fast lasers, optical modulators, transparent electrodes, and ultrafast photodetectors. It has been recognized internationally to have dominant advantages in photodetectors due to its high carrier mobility, gapless spectrum, and frequency-independent absorption coefficient. With the wavelength of 1.06 µm, the mechanism of light waves' transmission in the cavity and the graphehne's absorption are studied by using optical transmission matrix method and scattering matrix method; the light absorption model of the graphene photodetector based on microcavity is established. Device's final quantum efficiency reaches 91.2%, respectively reaches 0.778 A·W(-1), its full width at half maximum (FWHM) reaches 6 nm; the influence between graphene's position in the microcavity and device's absorption shows that device's absorption's peak value changes periodically with graphene's position under resonant condition, and the variety of length of microcavity does not have any influence on the peak value, but changes the graphene's position when absorption reaches peak value, on the condition that the length of microcavity is n times of half of wavelength, the number of device's absorption peak value is 2n with the variety of graphene's position, and all the peak values are symmetrical with respect to the center of microcavity, the final graphene's position is 0.402 8 mm away from the top mirror of microcavity, and the absorption reaches 94%, Compared with single layer graphene, the absorption rate increases 16 dB; By solving SNR equation of the graphene photodetector based on microcavity and SNR equation of the avalanche photodiode, eventually finds that the SNR of the graphene photodetector based on microcavity is 90.3, which raises 10 dB compared with the avalanche photodiode's. Theoretical analysis shows the graphene photodetector based on microcavity has high absorption rate, high quantum efficiency, and high SNR. In this paper, the research achievements provide a theoretical reference to update and design higher SNR photodetector used in laser rangefinder's receiving system.

[Analysis of Theory and Performance of Multi Layer Graphene Nanoribbons Photodetector].

Multilayer graphene, with wide absorption spectrum and unique photoelectric properties, is an ideal material to make the next generation of photoelectric detector. Taking graphene interband tunneling theory as the foundation, a photoelectric detector model with the structure of multilayer graphene nanoribbons was proposed. Nanoribbons which contacted with source and drain electrode at the end were sandwiched between the semiconductor substrate and the top and back gate. Using this model, a photoelectric conversion mechanism of multilayer graphene nanoribbon detector was established. It discussed the working principle of the detector at different top gate voltage, studied the relationship between the source-drain current and the incident light energy, researched the influence of the bias voltage, the length of depletion and the values of band gap on the dark current, and analyzed the change of detector responsibility and detectivity with the incident light energy under the different parameters. The results show that, the responsibility of detector increases with the layers of nanoribbons, and are affected by the band gap, the length of depletion and the bias voltage. The maximum responsibility up to 10(3) A·W(-1); By limiting on the top gate voltage, the band gap and other variables can control the dark current of system and increase the detectivity, the detectivity up to a maximum value of 10(9) cm Hz(1/2)·W(-1). The structure of multilayer graphene nanoribbons can enhance the absorption of the incident light, improve the sensitivity of the detector and the detection capability of weak light, and realize the detection from THz to far infrared wavelength of incident light. The detection performance is far better than that of many quantum structures and narrow-band semiconductor structure of photoelectric detector.

Posterior C1-C2 screw and rod instrument for reduction and fixation of basilar invagination with atlantoaxial dislocation.

PURPOSE: To report the surgical technique and preliminary clinical results for the treatment of basilar invagination (BI) with atlantoaxial dislocation (AAD) by posterior C1-C2 pedicle screw and rod instrument. METHODS: Between July 2012 and August 2013, 33 patients who had BI with AAD underwent surgery at our institution. Pre and postoperative three-dimensional computed tomographic (CT) scans were performed to assess the degree of dislocation. Magnetic resonance (MR) imaging was used to evaluate the compression of the medulla oblongata. For all patients, reduction of the AAD was conducted by two steps: fastening nuts and rods was performed to achieve the horizontal reduction. Distraction between C1 and C2 screws was performed to obtain the vertical reduction. RESULTS: No neurovascular injury occurred during surgery. Follow-up ranged from 6 to 15 months (mean 10.38 months) in 32 patients. Post-operative three-dimensional CT showed that complete horizontal reduction was obtained in 30/33 (90.9%), and complete vertical reduction was obtained in 31/33 (93.9%). The repeated three-dimensional CT and MR image demonstrated that bony fusion and the decompression of the medulla oblongata were obtained in all patients. Clinical symptoms improved significantly 3 months after surgery. CONCLUSIONS: This C1-C2 pedicle screw and rod instrument is a promising technique for the treatment of BI with AAD.

Clinical Characteristics, Treatment, and Survival Outcome of Ependymoma in Infants.

BACKGROUND: Treatment modalities of ependymoma in infants remain controversial. Postoperative adjuvant radiotherapy could prolong overall survival but has the potential to affect nervous system development in infants. The role of adjuvant chemotherapy in prolonging overall survival for infants with ependymoma is still unclear. Therefore we designed this study to explore the effect of treatment modalities on survival time of infants with ependymoma. METHODS: We studied 72 infants with ependymoma from the Surveillance, Epidemiology, and End Results database in this retrospective analysis. Univariate and multivariate Cox proportional hazard models were adopted to determine hazard ratios and compare overall survival. RESULTS: Among 72 infants with ependymoma, 35 were male (48.6%) and 37 were female (51.4%). The 5-year overall survival of all patients was 67%. Forty-six infants (63.9%) received gross total resection, 20 (27.8%) received subtotal resection, and 6 (8.3%) did not receive surgical resection or only autopsy. Twenty-one infants (29.2%) received radiotherapy, and 45 (62.5%) received chemotherapy. Multivariate analysis revealed that patients accepted surgical resection (No vs. gross total resection, P < 0.001; No vs. subtotal resection, P = 0.026) and chemotherapy (No vs. Yes, P = 0.024) are the independent prognostic factors for overall survival. CONCLUSIONS: Treatment modality is associated with survival time in infants with ependymoma. The extent of resection and chemotherapy were independent prognostic factors for infants with ependymoma.

[Individualized treatment of the atlantoaxial dislocation in craniovertebral junction abnormalities].

OBJECTIVES: To analyze the clinical characteristics of the atlantoaxial dislocation (AAD) in craniovertebral junction (CVJ) abnormalities and to study the setup of its surgery strategy. METHODS: From April 2009 to November 2011, 56 patients of AAD and CVJ abnormalities including 22 male and 34 female patients who had received surgery were analyzed. There were 2 cases of reducible AAD and 54 cases of irreducible AAD. The age of the patients ranged from 9 to 56 years (mean 34 years). Among them, 14 cases achieved reduction/partial reduction via direct posterior fixation, 41 cases had transoral anterior deconpression and occipito-cervical/C1-C2 fusion and 1 case had the posterior odontoidectomy and spinal fusion. RESULTS: Fifty-three cases had a follow-up between 6 months and 36 months (mean 20 months) and 3 cases lost follow-up (had improvement at discharge). Seven cases had complications as follows: 1 case had irreversible spinal cord injury and muscle weakness of extremities, 2 cases had cerebrospinal leak, 2 cases had pulmonary infection, 1 case had local granuloma hyperplasia and 1 case had delayed healing of the incision. The later 6 cases all got recovery after reasonable treatments. The grades of Nurick at last follow-up were as follows: 6 cases (11.3%) improved by 3 grades, 30 cases (56.6%) improved by 2 grades, 13 cases (24.5%) improved by 1 grade, 3 cases (5.7%) without change, 1 case (1.9%) get worse. CONCLUSIONS: Reducible AAD could achieve direct reduction and fixation via posterior pathways. Irreducible AAD needs individualized treatment. To choose the direct reduction and fixation or transoral odontoidectomy and posterior fixation and fusion should consider the pathogenetic condition, the image data and personal clinical experience.

[Surgical treatment of large or giant cavernous sinus hemangiomas via epidural approach].

OBJECTIVE: To summarize the curative effect of surgically treated large or giant cavernous sinus hemangiomas (CSH) via epidural approach. METHODS: From June 1999 to June 2011, 19 cases of CSH including 15 female and 4 male patients, ranging from 26 to 70 years (mean 45.3 years) were retrospectively reviewed. Ptosis/ocular motility disorders (10 cases), headache/ophthalmalgia (7 cases), decreased visual acuity (7 cases) and facial hyperesthesia (4 cases) were the most common presenting complaints. The epidural approach was taken and the tumor dissection was performed at the interval between trochlear nerve and ophthalmic nerve and the interval between ophthalmic nerve and maxillary nerve. The curative effect was followed up regularly. RESULTS: Gross total resection was attained in 13 cases, near-total resection in 4 cases, subtotal resection in 1 case and partial resection in 1 case. The follow-up period was between 6-144 months (mean 41.5 months). The results of last follow-up were as follows: among the 10 patients with ptosis/ocular motility disorders, complete remission was achieved in 5, improvement in 2, no change in 2 and lost follow-up in 1. Facial hypoesthesia symptom got complete remission in 2 patients and partial remission in the other 2 patients. The other symptoms mentioned above were all relieved. One patient got complication with impairment of vision and ocular motility disorders. CONCLUSIONS: Combined with skilled skull base techniques, surgical treatment of large or giant CSH via epidural approach is an effective method and the preservation of cranial nerves could be attained to an acceptable level.

Treatment of Reducible Atlantoaxial Dislocation and Basilar Invagination Using the Head Frame Reduction Technique and Atlantoaxial Arthrodesis.

STUDY DESIGN: Retrospective case series. OBJECT: To evaluate the outcomes of a head frame reduction and atlantoaxial arthrodesis technique for the treatment of reducible basilar invagination (BI) and atlantoaxial dislocation (AAD). METHODS: Seventy-two reducible BI and AAD cases who were treated with the head frame reduction and atlantoaxial arthrodesis technique from June 2015 to December 2018 were retrospectively analyzed. Radiological measurements including the atlantodental interval (ADI), the height of odontoid process above Chamberlain line, Wackenheim line, clivus-canal angle (CCA) and JOA score were evaluated. RESULTS: There was no death in this series. The follow-up period ranged from 6 to 32 months (mean: 21.2 months). Radiological, complete or 90% reduction was attained and complete decompression was demonstrated in all patients. The CCA increased from 123.22 ± 8.36 preoperatively to 143.05 ± 8.79 postoperatively (P < 0.01). There was no patient found postoperative dysphagia. Neurological improvement was observed in all patients, with the JOA scores increasing from 12.53 ± 1.93 preoperatively to 16.13 ± 1.23 postoperatively (P < 0.01). Solid bony fusion was demonstrated in 69 patients at follow-up (95.8%). CONCLUSION: Head frame reduction technique is a simple and effective treatment which could relief neurologic compression and adjust the CCA in patients with reducible AAD and BI with lower potential risks. Atlantoaxial fixation with short segmental fixation, strong purchase and low shearing force could maintain superior stabilization. The safety and long-term efficacy of such fixation and reduction technique were favorable, which illustrated that it could be a promising treatment algorithm for such kind of disease.

C2 medial pedicle screw: a novel "in-out-in" technique as an alternative option for posterior C2 fixation in cases with a narrow C2 isthmus.

OBJECTIVE: The authors describe a novel "in-out-in" technique as an alternative option for posterior C2 screw fixation in cases that involve narrow C2 isthmus. Here, they report the preliminary radiological and clinical outcomes in 12 patients who had a minimum 12-month follow-up period. METHODS: Twelve patients with basilar invagination and atlantoaxial dislocation underwent atlantoaxial reduction and fixation. All patients had unilateral hypoplasia of the C2 isthmus that prohibited insertion of pedicle screws. A new method, the C2 medial pedicle screw (C2MPS) fixation, was used as an alternative. In this technique, the inner cortex of the narrow C2 isthmus was drilled to obtain space for screw insertion, such that the lateral cortex could be well preserved and the risk of vertebral artery injury could be largely reduced. The C2MPS traveled along the drilled inner cortex into the anterior vertebral body, achieving a 3-column fixation of the axis with multicortical purchase. RESULTS: Satisfactory C2MPS placement and reduction were achieved in all 12 patients. No instance of C2MPS related vertebral artery injury or dural laceration was observed. There were no cases of implant failure, and solid fusion was demonstrated in all patients. CONCLUSIONS: This novel in-out-in technique can provide 3-column rigid fixation of the axis with multicortical purchase. Excellent clinical outcomes with low complication rates were achieved with this technique. When placement of a C2 pedicle screw is not possible due to anatomical constraints, the C2MPS can be considered as an efficient alternative.

Posterior atlantoaxial facet joint reduction, fixation and fusion as revision surgery for failed suboccipital decompression in patients with basilar invagination and atlantoaxial dislocation: Operative nuances, challenges and outcomes.

OBJECTIVE: To report the technical nuances and clinical outcomes of posterior atlantoaxial facet joint reduction, fixation and fusion (AFRF) technique as a revision procedure for BI and AAD patients with failed suboccipital decompression and large occipital bone defect. PATIENTS AND METHODS: We reviewed 32 patients with BI and AAD who were misdiagnosed as a simple Chiari malformation and received a suboccipital decompression surgery before admission. All patients underwent AFRF as a revision surgery. The separating, fusing, opacifying and false-coloring-volume rendering (SFOF-VR) technique was used to identify the course of the VA. Clinical and radiological outcomes were assessed after revision surgeries. RESULTS: Clinical symptoms improved in all patients. The postoperative atlantodens interval, Wackenheim line and clivus-canal angle significantly improved (all P < 0.01). Intraoperative dural tear and cerebrospinal fluid leakage occurred in 3 patients and were managed by suture repair and lumbar drain. Abnormal VA was identified in 7 patients and no VA injury occurred with the aid of SFOF-VR technique. The average follow-up was 19.1 months and atlantoaxial bone fusion was confirmed in 31 patients. CONCLUSION: For BI and AAD patients with failed suboccipital decompression, revision surgery is challenging. Occipitocervical fixation and posterior midline bone grafting are rather difficult due to the large occipital bone defect. The current study demonstrated that the posterior AFRF is a simple, safe and highly effective technique in revision surgery for such cases. For VA variations, the SFOF-VR technique is an effective tool to delineate the course VA.

The Role of Transverse Connectors in C1-C2 fixation for Atlantoaxial Instability: Is It Necessary? A Biomechanical Study.

OBJECTIVE: To investigate the biomechanical effect of C1 lateral mass-C2 pedicle screw-rod (C1LM-C2PS) fixation with and without transverse connectors (TC) in an atlantoaxial instability (AAI) model. METHODS: Ten freshly frozen cadaveric specimens were tested using an industrial robot under the following conditions: intact model, AAI model, C1-C2 model, C1-C2 with one TC model, and C1-C2 with two TCs model. Three types of motion, flexion-extension (FE), lateral bending (LB), and axial rotation (AR), were applied (1.5 Nm) to the specimens. The range of motion (ROM) and neutral zone (NZ) between C1 and C2 in all directions were measured. RESULTS: Compared with those of the intact and AAI models, the C1-C2 ROM and NZ of all instrumented groups were decreased significantly in each direction of loading motion (P < 0.05). The mean FE ROM in the no TC, 1 TC, and 2 TC groups was 2.12° ± 0.41°, 2.29° ± 0.42°, and 2.04° ± 0.69°, respectively (P = 0.840, 0.981, 0.628, respectively); the mean LB ROM in the 3 intervention groups was 1.26° ± 0.67°, 1.02° ± 0.51° and 1.03° ± 0.57°, respectively (P = 0.489, 0.501, 1.000, respectively). During AR, the ROM and NZ of the no TC group (3.19° ± 0.89° and 1.51° ± 0.42°) were significantly reduced by more than 60% compared with those in the 1 (0.98° ± 0.28° and 0.40° ± 0.11°) and 2 TC groups (1.17° ± 1.69° and 0.42° ± 0.61°) (P < 0.001). Two TCs were equivalent for all loading motions to 1 TC (P > 0.05). CONCLUSIONS: Adding TCs to C1LM-C2PS can effectively decrease the axial rotation ROM and enhance the stability of C1-C2 segment. Therefore, it is necessary to use TC-strengthened C1 lateral mass -C2 pedicle screw-rod fixation in patients with instability of C1-C2.

Biomechanical evaluation of two alternative techniques to the Goel-Harms technique for atlantoaxial fixation: C1 lateral mass-C2 bicortical translaminar screw fixation and C1 lateral mass-C2/3 transarticular screw fixation.

OBJECTIVE: The authors conducted a study to investigate the biomechanical feasibility and stability of C1 lateral mass-C2 bicortical translaminar screw (C1LM-C2TL) fixation, C1 lateral mass-C2/3 transarticular screw (C1LM-C2/3TA) fixation, and C1LM-C2/3TA fixation with transverse cross-links (C1LM-C2/3TACL) as alternative techniques to the Goel-Harms technique (C1 lateral mass-C2 pedicle screw [C1LM-C2PS] fixation) for atlantoaxial fixation. METHODS: Eight human cadaveric cervical spines (occiput-C7) were tested using an industrial robot. Pure moments that were a maximum of 1.5 Nm were applied in flexion-extension (FE), lateral bending (LB), and axial rotation (AR). The specimens were first tested in the intact state and followed by destabilization (a type II odontoid fracture) and fixation as follows: C1LM-C2PS, C1LM-C2TL, C1LM-C2/3TA, and C1LM-C2/3TACL. For each condition, the authors evaluated the range of motion and neutral zone across C1 and C2 in all directions. RESULTS: Compared with the intact spine, each instrumented spine significantly increased in stability at the C1-2 segment. C1LM-C2TL fixation demonstrated similar stability in FE and LB and greater stability in AR than C1LM-C2PS fixation. C1LM-C2/3TA fixation was equivalent in LB and superior in FE to those of C1LM-C2PS and C1LM-C2TL fixation. During AR, the C1LM-C2/3TA-instrumented spine failed to maintain segmental stability. After adding a cross-link, the rotational stability was significantly increased in the C1LM-C2/3TACL-instrumented spine compared with the C1LM-C2/3TA-instrumented spine. Although inferior to C1LM-C2TL fixation, the C1LM-C2/3TACL-instrumented spine showed equivalent rotational stability to the C1LM-C2PS-instrumented spine. CONCLUSIONS: On the basis of our biomechanical study, C1LM-C2TL and C1LM-C2/3TACL fixation resulted in satisfactory atlantoaxial stabilization compared with C1LM-C2PS. Therefore, the authors believe that the C1LM-C2TL and C1LM-C2/3TACL fixation may serve as alternative procedures when the Goel-Harms technique (C1LM-C2PS) is not feasible due to anatomical constraints.

Can Posterior Reduction Replace Odontoidectomy as Treatment for Patients With Congenital Posterior Atlantoaxial Dislocation and Basilar Invagination?

BACKGROUND: For patients with odontoid process protrusion and basilar invagination, posterior screw-rod fixation can usually achieve satisfactory horizontal reduction, but in some cases satisfactory reduction in the vertical direction cannot be achieved at the same time. OBJECTIVE: To propose a method for calculation of the theoretical maximum vertical reduction possible in individual patients. METHODS: The computed tomography imaging data of patients with occipitalization and basilar invagination who were treated at our institute between January 2013 and June 2016 were retrospectively analyzed. The direction of odontoid reduction was decided by the inclination of the lateral joint. The atlanto-dental distance was assumed to be the maximum possible reduction in the horizontal direction. The maximum vertical reduction possible was calculated based on these values. RESULTS: A total of 82 patients (34 males and 48 females) were included. The theoretical vertical reduction value was 4.2 ± 3.0 mm, which was significantly smaller than that of the dental protrusion (14.5 ± 3.8 mm, P = .000). Analysis of follow-up data (29 cases) showed that, the difference between the theoretical vertical reduction value H (4.7 ± 3.5 mm) and the actual vertical reduction value Ha (5.6 ± 3.5 mm) was not significant (P = .139). CONCLUSION: The theoretical calculation method we proposed can well predict the actual degree of vertical reduction. The theoretical vertical reduction value is significantly lower than the odontoid protrusion value, indicating that satisfactory reduction in the vertical direction is difficult with a posterior approach alone.

Usefulness of 3D Printed Models in the Management of Complex Craniovertebral Junction Anomalies: Choice of Treatment Strategy, Design of Screw Trajectory, and Protection of Vertebral Artery.

OBJECTIVE: To evaluate the usefulness of 3-dimensional (3D) printed models as an aid for the treatment of complex CVJ anomalies. METHODS: 3D printed models were fabricated for 21 patients with complex CVJ anomalies, including vertebral artery anomaly, thin C2 pedicle, vertical atlantoaxial facet joint, or rotational dislocation combined with atlantoaxial dislocation and basilar invagination. Preoperative planning, surgical simulation, and intraoperative reference were achieved using the 3D model during the surgical treatment. The usefulness of 3D printed models, and postoperative clinical and radiological outcomes were assessed. RESULTS: Direct posterior reduction and atlantoaxial fixation were achieved in 19 patients. Transoral odontoidectomy followed by posterior fixation was implemented for 2 patients with vertical facet joint and rotational dislocation. All screws were safely inserted with no complication, and 90% patients achieved a >60% reduction of both horizontal and vertical dislocation. Clinical symptoms improved in all patients, with the averaged Japanese Orthopedic Association scores increasing from 11.14 to 14.43 (P < 0.01). CONCLUSIONS: The patient-specific 3D printed model would be an effective tool for evaluation of the reducibility of the atlantoaxial dislocation and basilar invagination, decision making in choosing the optimal surgical approach and way of fixation, and precise placement of the screw while protecting the vertebral artery and spinal cord. The risk of neurovascular injury was minimized, and encouraging outcomes were achieved with the aid of this technique.

TRIM24 promotes stemness and invasiveness of glioblastoma cells via activating Sox2 expression.

BACKGROUND: Glioblastoma stem cells (GSCs) are a subpopulation of glioblastoma (GBM) cells that are critical for tumor invasion and treatment resistance. However, little is known about the function and mechanism of tripartite motif-containing 24 (TRIM24) in GSCs. METHODS: Immunofluorescence, flow cytometry, and western blot analyses were used to evaluate TRIM24 and cluster of differentiation (CD)133 expression profiles in GBM surgical specimens and GSC tumorspheres. Different TRIM24 expression levels in patients' tumors, as measured by both immunohistochemistry and western blot, were related to their corresponding MRI data. Wound healing, Matrigel invasion, and xenograft immunohistochemistry were conducted to determine GBM cell invasion. RESULTS: We identified that TRIM24 was coexpressed with CD133 and Nestin in GBM tissues and tumorsphere cells. Limiting dilution assays and xenotransplantation experiments illustrated that knockdown of TRIM24 expression reduced GSC self-renewal capacity and invasive growth. TRIM24 expression levels were positively associated with the volumes of peritumoral T2 weighted image abnormality. Rescue experiments indicated TRIM24 participation in GBM infiltrative dissemination. Chromatin immunoprecipitation, reporter gene assay, PCR, western blot, and immunohistochemistry demonstrated that TRIM24 activated the expression of the pluripotency transcription factor sex determining region Y-box 2 (Sox2) to regulate GBM stemness and invasion in vitro and in vivo. Finally, the close relationship between TRIM24 and Sox2 was validated by testing samples enrolled in our study and exploring external databases. CONCLUSIONS: Our findings uncover essential roles of the TRIM24-Sox2 axis in GBM stemness and invasiveness, suggesting TRIM24 as a potential target for effective GBM management.

Three-Dimensional Evaluation and Classification of the Anatomy Variations of Vertebral Artery at the Craniovertebral Junction in 120 Patients of Basilar Invagination and Atlas Occipitalization.

BACKGROUND: Patients with basilar invagination and atlas occipitalization usually present abnormal anatomy of the vertebral arteries (VAs) at the craniovertebral junction (CVJ). OBJECTIVE: To describe and further classify different types of VA variations at the CVJ with 3D visualization technology. METHODS: One hundred twenty patients with basilar invagination and atlas occipitalization who had undergone 3-dimensional computed tomographic angiography (3D-CTA) were retrospectively studied. Imaging data were processed via the separating, fusing, opacifying, and false-coloring-volume rendering technique. Abnormal anatomy of the VA at the CVJ was categorized and related anatomic parameters were measured. RESULTS: Seven different types were classified. Type I, VAs enter the cranium after leaving VA groove on the posterior arch of atlas (26.7% of 240 sides); Type II, VAs enter an extraosseous canal created in the assimilated atlas lateral mass-occipital condyle complex before reaching the cranium (53.3%); Type III, VA courses above the axis facet or curves below the atlas lateral mass then enter the cranium (11.7%); Type IV, VAs enter the spinal canal under the axis lamina (1.3%); Type V, high-riding VA (31.3%); Type VI, fenestrated VA (2.9%); Type VII, absent VA (4.2%). Distance from the canal of Type II VA to the posterior facet surface of atlas lateral mass (5.51 ± 2.17 mm) means a 3.5-mm screw can be safely inserted usually. Shorter distance from the midline (13.50 ± 4.35) illustrates potential Type III VA injury during exposure. Decreased height and width of axis isthmus in Type V indicate increased VA injury risks. CONCLUSION: Seven types of VA variations were described, together with valuable information helpful to minimize VA injury risk intraoperatively.

Effects of transverse connector on reduction and fixation of atlantoaxial dislocation and basilar invagination using posterior C1-C2 screw-rod technique.

BACKGROUND CONTEXT: The mechanical strength provided by internal fixation is crucial for maintaining reduction and facilitating bony fusion. Though satisfactory results with the C1-C2 technique have been acquired in most clinical reports, the related problems of fusion delay and pseudarthrosis still exist. To increase the chance of bony fusion, a transverse connector (TC) is frequently used to augment torsional stiffness of thoracolumbar screw/rod constructs. Nevertheless, the clinical implication of TC in the management of atlantoaxial dislocation (AAD) and basilar invagination (BI) remains largely unknown. PURPOSE: To evaluate the effects of TC application on C1-C2 screw-rod constructs based on consecutive adult patients with AAD and BI in a single institution over a 10-year period. STUDY DESIGN: A retrospective study. PATIENT SAMPLE: Patients with AAD and BI, who were treated with posterior C1-C2 screw-rod technique with or without TC usage from June 2007 to June 2017 at a single institution. OUTCOME MEASURES: The radiological measurements included the anterior atlantodental interval (AADI), posterior atlantodental interval (PADI), height of odontoid process above Chamberlain line, and cervicomedullary angle (CMA). Patients' neurologic status was evaluated with the Japanese Orthopaedic Association (JOA) score. Fusion status was evaluated at different follow-up periods. METHODS: We compared the difference of clinical, radiological, and surgical outcomes between the TC and NTC groups postoperatively. RESULTS: In total, there were 149 consecutive patients in the TC group and 168 patients in the NTC group. On average, 1.2 TCs per patient were used in the TC group. No significant differences were identified for operative time and blood loss between groups. There was also no statistical difference in the radiological measurements of AADI, PADI, Chamberlain line, and CMA between the TC and NTC groups preoperatively and postoperatively. A significantly higher JOA score was obtained in the TC group than that in the NTC group postoperatively. The fusion rates were higher in the TC group than those in the NCT group at the early stage postoperatively (3 and 6 months; p<.01). CONCLUSIONS: Use of TCs seems to improve bony fusion and neurologic outcomes in the treatment of AAD and BI with C1-C2 screw-rod technique.

Change of Anatomical Location of the Internal Carotid Artery Relative to the Atlas with Congenital Occipitalization and the Relevant Clinical Implications.

INTRODUCTION: The occipitalization of the atlas (OA) is always associated with multiplanar dislocation and olisthy of the C1 over C2 facets, which may change the anatomical relationship between the internal carotid artery (ICA) and the atlas. The purpose of this current study is to identify the location of the ICA relative to the anterior aspect of the atlas in patients with OA and define the clinical implications for screw placement. METHODS: We retrospectively reviewed the computed tomography angiography data of 86 patients with OA and 86 control subjects. Several parameters were also measured to quantitatively evaluate the mutual relationship. RESULTS: In the OA group, 25.6% of ICAs were located in area 3 and 74.4% in area 2, whereas the percentages were 57.4% and 42.6%, respectively, in the control group. There were 73 (42.4%) ICAs in which the shortest distance between the dorsal surface of the ICA and the ventral cortex of the atlas was less than 4 mm in the OA group and only 50 (29.1%) in the control group. The ideal angulation of C1 screw trajectory was about 5 degrees more medial in the OA group than that in the control group (P < 0.01). CONCLUSIONS: The risk of ICA injury is much higher in OA patients than in non-OA patients during the C1 screw placement. A mean medial angulation about 20 degrees will permit a long and safe screw purchase, but should be individualized. We recommend careful preoperative computed tomography angiography evaluation in all patients before surgery.