ABSTRACT
Cellulose nanofiber (CNF) possesses excellent intrinsic properties, and many CNF-based high-performance structural and functional materials have been developed recently. However, the coordination of the mechanical properties and functionality is still a considerable challenge. Here, a CNF-based structural material is developed by a bioinspired gradient structure design using hollow magnetite nanoparticles and the phosphorylation-modified CNF as building blocks, which simultaneously achieves a superior mechanical performance and electromagnetic wave absorption (EMA) ability. Benefiting from the gradient design, the flexural strength of the structural material reached â¼205 MPa. Meanwhile, gradient design improves impedance matching, contributing to the high EMA ability (-59.5 dB) and wide effective absorption width (5.20 GHz). Besides, a low coefficient of thermal expansion and stable storage modulus was demonstrated as the temperature changes. The excellent mechanical, thermal, and EMA performance exhibited great potential for application in stealth equipment and electromagnetic interference protecting electronic packaging materials.
ABSTRACT
As the dimensionality of materials generally affects their characteristics, thin films composed of low-dimensional nanomaterials, such as nanowires (NWs) or nanoplates, are of great importance in modern engineering. Among various bottom-up film fabrication strategies, interfacial assembly of nanoscale building blocks holds great promise in constructing large-scale aligned thin films, leading to emergent or enhanced collective properties compared to individual building blocks. As for 1D nanostructures, the interfacial self-assembly causes the morphology orientation, effectively achieving anisotropic electrical, thermal, and optical conduction. However, issues such as defects between each nanoscale building block, crystal orientation, and homogeneity constrain the application of ordered films. The precise control of transdimensional synthesis and the formation mechanism from 1D to 2D are rarely reported. To meet this gap, we introduce an interfacial-assembly-induced interfacial synthesis strategy and successfully synthesize quasi-2D nanofilms via the oriented attachment of 1D NWs on the liquid interface. Theoretical sampling and simulation show that NWs on the liquid interface maintain their lowest interaction energy for the ordered crystal plane (110) orientation and then rearrange and attach to the quasi-2D nanofilm. This quasi-2D nanofilm shows enhanced electric conductivity and unique optical properties compared with its corresponding 1D geometry materials. Uncovering these growth pathways of the 1D-to-2D transition provides opportunities for future material design and synthesis at the interface.
ABSTRACT
Electrocatalysts with high activity and durability for acidic oxygen evolution reaction (OER) play a crucial role in achieving cost-effective hydrogen production via proton exchange membrane water electrolysis. A novel electrocatalyst, Te-doped RuO2 (Te-RuO2) nanotubes, synthesized using a template-directed process, which significantly enhances the OER performance in acidic media is reported. The Te-RuO2 nanotubes exhibit remarkable OER activity in acidic media, requiring an overpotential of only 171 mV to achieve an anodic current density of 10 mA cm-2. Furthermore, they maintain stable chronopotentiometric performance under 10 mA cm-2 in acidic media for up to 50 h. Based on the experimental results and density functional calculations, this significant improvement in OER performance to the synergistic effect of large specific surface area and modulated electronic structure resulting from the doping of Te cations is attributed.
ABSTRACT
Defects can introduce atomic structural modulation and tailor performance of materials. Herein, it demonstrates that semiconductor WO3 with inert electrocatalytic behavior can be activated through defect-induced tensile strains. Structural characterizations reveal that when simply treated in Ar/H2 atmosphere, oxygen vacancies will generate in WO3 and cause defective structures. Stacking faults are found in defects, thus modulating electronic structure and transforming electrocatalytic-inert WO3 into highly active electrocatalysts. Density functional theory (DFT) calculations are performed to calculate *H adsorption energies on various WOx surfaces, revealing the oxygen vacancy composition and strain predicted to optimize the catalytic activity of hydrogen evolution reaction (HER). Such defective tungsten oxides can be integrated into commercial proton exchange membrane (PEM) electrolyser with comparable performance toward Pt-based PEM. This work demonstrates defective metal oxides as promising non-noble metal catalysts for commercial PEM green-hydrogen generation.
ABSTRACT
Freeze-casting has been wildly exploited to construct porous ceramics but usually requires costly and demanding freeze-drying (high vacuum, size limit, and supercooled chamber), which can be avoided by the ambient pressure drying (APD) technique. However, applying APD to freeze-cast ceramic based on an aqueous suspension is still challenging due to inert surface chemistry. Herein, a modified APD strategy is developed to improve the drying process of freeze-cast ceramics by exploiting the simultaneous ice etching, ionic cross-linking, and solvent exchange under mild conditions (-10-0 °C, ambient pressure). This versatile strategy is applicable to various ceramic species, metal ions, and freezing techniques. The incorporated metal ions not only enhance liquid-phase sintering, producing ceramics with higher density and mechanical properties than freeze-cast counterparts, but also render customizable coloration and antibacterial property. The cost-/time-efficient APD is promising for mass production and even successive production of large-size freeze-cast ceramics that exceed the size of commercial freeze-dryers.
ABSTRACT
Constructing structural materials from sustainable raw materials is considered an efficient way to reduce the potential threat posed by plastics. Nevertheless, challenges remain regarding combining excellent mechanical and thermal properties, especially the balance of strength and toughness. Here, we report a 3D nanofiber network interfacial design strategy to strengthen and toughen all-natural structural materials simultaneously. The introduced protonated chitosan at the interface between the surface oxidized 3D nanonetwork of bacterial cellulose forms the interfacial interlocking structure of nanonetworks, achieving a robust physical connection and providing enough physical contact sites for chemical crosslinking. The obtained sustainable structural material successfully integrates excellent mechanical and thermal properties on the nanoscale of cellulose nanofibers, such as light weight, high strength, and superior thermal expansion coefficient. The relationship between structural design and comprehensive mechanical property improvement is analyzed in detail, providing a universal perspective to design sustainable high-performance structural materials from nanoscale building blocks.
ABSTRACT
Lightweight and impact-resistant materials with self-monitoring capability are highly desired for protective applications, but are challenging to be artificially fabricated. Herein, a scalable-manufactured aramid nanofiber (ANF)-based composite combining these key properties is presented. Inspired by the strengthening and toughening mechanisms relying on recoverable interfaces commonly existing in biological composites, mechanically weak but dense hydrogen bonds are introduced into the ANF interfaces to achieve simultaneously enhanced tensile strength (300 MPa), toughness (55 MJ m-3 ), and impact resistance of the nanofibrous composite. The achieved mechanical property combination displays attractive advantages compared with that of most of previously reported nanocomposites. Additionally, the nanofibrous composite is designed with a capability for real-time self-monitoring of its structural safety during both quasi-static tensile and dynamic impact processes, based on the strain/damage-induced resistance variations of a conductive nanowire network inside it. These comprehensive properties enable the present nanofibrous composite with promising potential for protective applications.
Subject(s)
Nanofibers , Nanofibers/chemistry , Tensile StrengthABSTRACT
Natural biomaterials often show ordered nanowire structures (ONWS) which display unique structural color or superior mechanical performance. Meanwhile, plenty of modern nanodevices with ONWS have flourished with activities focused on both basic and applied research. Manipulating synthetic nanowire (NW) from a disordered state to a hierarchically ordered structure via various assembly strategies brings about intriguing and exotic chemical/physical properties. In the past decades, many methods have been developed to assemble NWs and fabricate organized architectures, such as Langmuir-Blodgett interfacial assembly, spin-coating assembly, fluid-flow-induced assembly, and ice-template assembly. Nevertheless, for practical applications, large-scale and high-efficiency assembly strategies toward precise controlled architectures are largely limited by the lack understanding of assembly mechanisms. Especially, the manipulation principles and driving forces behind the state-of-art assembly strategies are still unclear. Besides, the lesser research attention on dynamic kinetics also impedes the revelation of the NW self-assembly mechanism. With the emergence of advanced in situ techniques, such as synchrotron-based X-ray techniques and in situ transmission electron microscopy (TEM), the dynamic monitoring of NW behavior in many practical environments becomes possible. In addition, the alignment direction and the stacking manner of NW film are of significance to the final performance. There is a lack of connection between the properties of one-dimensional nanoscale building blocks and the functionalities of the macro-assembly structures. To this end, dynamic monitoring is highly desired, which enables the precision modulation of NW assembly structure, leading to the discovery or prediction of new structures, novel properties, and performance optimization.In this Account, we aim to uncover the underlying kinetics of NW assembly or local reaction and mass transportation processes, as well as to build a solid connection from individual NWs to NW assembly structures with enhanced properties and eventually to macroscopic materials application. We first review the recent progress in state-of-art NW assembly strategies for diverse aligned structures according to the manipulation principle and the driving forces. To systematically review the NW self-assembly strategies, we categorize these strategies into three states: NWs on the liquid interface via surface tension, NW assembly in liquid via solution-shearing flow field, and NW assembly at the solid interval via physical repulsive force. Then, we introduce the existing advanced characterization techniques, including synchrotron-based X-ray scattering and in situ TEM, to dynamically monitor the intermediate states of the NW assembly and transport processes. The comprehensive understanding of this thermodynamic and kinetic mechanism facilitates the rational design, large scale, and high-efficiency fabrication of NW assemblies, thus promoting their applications in tailored optical-electrical electronics, smart electrochromic devices, electrocatalysis, structural materials, and chiral photonic crystals.
Subject(s)
Nanowires , Electricity , Electronics , Microscopy, Electron, Transmission , Nanowires/chemistry , Optics and PhotonicsABSTRACT
Bioinspired architectural design for composites with much higher fracture resistance than that of individual constituent remains a major challenge for engineers and scientists. Inspired by the survival war between the mantis shrimps and abalones, we design a discontinuous fibrous Bouligand (DFB) architecture, a combination of Bouligand and nacreous staggered structures. Systematic bending experiments for 3D-printed single-edge notched specimens with such architecture indicate that total energy dissipations are insensitive to initial crack orientations and show optimized values at critical pitch angles. Fracture mechanics analyses demonstrate that the hybrid toughening mechanisms of crack twisting and crack bridging mode arising from DFB architecture enable excellent fracture resistance with crack orientation insensitivity. The compromise in competition of energy dissipations between crack twisting and crack bridging is identified as the origin of maximum fracture energy at a critical pitch angle. We further illustrate that the optimized fracture energy can be achieved by tuning fracture energy of crack bridging, pitch angles, fiber lengths, and twist angles distribution in DFB composites.
ABSTRACT
Skin-mountable capacitive-type strain sensors with great linearity and low hysteresis provide inspiration for the interactions between human and machine. For practicality, high sensing performance, large stretchability, and self-healing are demanded but limited by stretchable electrode and dielectric and interfacial compatibility. Here, we demonstrate an extremely stretchable and self-healing conductor via both hard and soft tactics that combine conductive nanowire assemblies with double dynamic network based on π-π attractions and Ag-S coordination bonds. The obtained conductor outperforms the reported stretchable conductors by delivering an elongation of 3250%, resistance change of 223% at 2000% strain, high durability, and multiresponsive self-healability. Especially, this conductor accommodates large strain of 1500% at extremely knotted and twisted deformations. By sandwiching hydrogel conductors with a newly developed dielectric, ultrahigh stretchability and omni-healability are simultaneously achieved for the first time for a capacitive strain sensor inspired by metal-thiolate coordination chemistry, showing great potentials in wearable electronics and soft robotics.
Subject(s)
Nanowires , Wearable Electronic Devices , Electric Conductivity , Electronics , Humans , Hydrogels/chemistry , Nanowires/chemistryABSTRACT
Realizing autonomous self-healing and high stretchability of flexible supercapacitors over a wide temperature range remains a big challenge because of simultaneous incorporation of self-healing, stretchable and temperature-tolerant elements into a device as well as unfavorable electrochemical kinetics in harsh conditions. Here, we demonstrate for the first time an autonomous self-healing and intrinsically stretchable supercapacitor that can work at all-climate environments assembled by universally self-healing and highly stretchable organohydrogel electrodes with record-high temperature-invariant conductivity of â¼965 S/cm. Benefiting from multiple hydrogen bonding and dynamic metal coordination combined with electrochemistry-favorable components and integrated device configuration, the supercapacitor exhibits outstanding long-term stability, high stretchability, instantaneous and complete capacitive self-healability, and real-time mechanical healing at harsh temperatures from -35 to 80 °C. The superiorities in stretchability, self-healability, and all-climate tolerance enable the supercapacitor presented here as the best performer among the flexible supercapacitors reported to date.
ABSTRACT
The photothermoelectric effect, directly converting light energy into electrical energy, shows promising prospects in self-powered broad-band optical detection, which can extend to various applications, such as sensing, optoelectronic communications, and wide-temperature-range measurements. However, the low photosensitivity, narrow-band response, and rapid performance degeneration under continuous illumination restrict its broad application. Herein, we propose a simple bottom-up strategy to manipulate nanowires (NWs) into a well-defined multilayer Te-Ag2Te-Ag NW film, resulting in a high-performance photothermoelectric photodetector with a broad-band responsivity (4.1 V/W), large detectivity (944 MHz1/2 W-1), and fast response speed (0.4-0.7 s from 365 to 1200 nm). In addition, the ultrathin structure endows this device with slow and weak transverse heat conduction, enabling a stable voltage without an obvious degeneration over 1500 s. The highly anisotropic arrangement of NWs gives this device a prominent polarization sensitivity. Prospectively, this hierarchically designed nanowire film provides a promising pathway toward engineering photodetectors with high performance.
ABSTRACT
Direct and rapid printing and surface patterning of hydrogel thin films are of great significance in the construction of advanced electronic devices, yet they are greatly underdeveloped due to the intrinsic contradiction between mechanical strength and self-healability as well as recyclability. Here, we present a universal and rapid slipping-directed route with a newly developed water-soluble star polymer hydrogel for direct and reproducible printing and patterning of freestanding functional thin films with precisely controlled thicknesses, components, and surface structures on a large scale. The resulting thin films combine the features of large transmittance (93%), tough mechanical strength (114 MPa), multiresponsive self-healability, recyclability, and remarkable multifunctionality. With the unique humidity-sensitive properties as motivation, diverse humidity-sensing devices including an actuating switch, a supercapacitive sensor, and a noncontact electronic skin are facilely constructed through the humidity-induced transverse, longitudinal, and patterning assembly techniques, respectively. The method presented here is universal and efficient in the fabrication and assembly of thin films with controlled configuration and functionality for advanced flexible electronics.
Subject(s)
Hydrogels , Wearable Electronic Devices , Hydrogels/chemistry , Polymers/chemistry , Printing, Three-Dimensional , WaterABSTRACT
Softness, adhesion, stretchability, and fast recovery from large deformations are essential properties for conductive elastomers that play an important role in the development of high-performance soft electronics. However, it remains an ongoing challenge to obtain conductive elastomers that combine these properties. We have fabricated a super soft (Young's modulus 2.3-12 kPa), highly stretchable (up to 1500% strain), and underwater adhesive silicone conductive elastomer composite (SF-C-PDMS) by incorporating dimethyl silicone oil as a lubricating agent in a cross-linked molecular network. The resultant SF-C-PDMS not only exhibits superior softness but also can readily recover after a strain of 1000%. The initial resistance only decreases by 8% after 100000 cycles of tensile fatigue test (100% strain, 0.5 Hz, 15 mm/s). This multifunctional silicone conductive elastomer composite is obtained in a one-step preparation at room temperature using commercially available materials. Moreover, we illustrate the capabilities of this composite in motion sensing.
ABSTRACT
The balance between degradability and drug release kinetics is a major challenge for the development of drug delivery systems. Here we develop hierarchically structured nanoparticles comprising multiple noncontact silica shells using an amorphous calcium carbonate template. The system could be degraded in a sequential fashion on account of the molecularly engineered multishelled structures. The hydrolysis rate of drug-containing cores is inversely correlated with the nanoparticle concentration due to the shielding effect of the hierarchical nanostructure and could be exploited to regulate the release kinetics. Specifically, multishelled nanospheres show a low drug release rate with high doses that increases steadily as the concentration decreases due to continuous degradation, thus stabilizing the local drug concentration for effective tumor therapy. Moreover, the nanoparticles could be eventually degraded completely, which may reduce their health risks. This kind of hierarchically structured silica-based nanoparticle could serve as a sustainable drug depot and provides a new avenue for tumor treatment.
Subject(s)
Nanoparticles , Nanospheres , Nanostructures , Neoplasms , Humans , Drug Liberation , Nanostructures/chemistry , Silicon Dioxide/chemistry , Nanospheres/chemistry , Nanoparticles/chemistry , Neoplasms/drug therapy , Drug Delivery SystemsABSTRACT
Picturing the atomic migration pathways of catalysts in a reactive atmosphere is of central significance for uncovering the underlying catalytic mechanisms and directing the design of high-performance catalysts. Here, we describe a reduction-controlled atomic migration pathway that converts nanoparticles to single atom alloys (SAAs), which has remained synthetically challenging in prior attempts due to the elusive mechanism. We achieved this by thermally treating the noble-metal nanoparticles M (M = Ru, Rh, Pd, Ag, Ir, Pt, and Au) on metal oxide (CuO) supports with H2/Ar. Atomic-level characterization revealed such conversion as the synergistic consequence of noble metal-promoted H2 dissociation and concomitant CuO reduction. The observed atomic migration pathway offers an understanding of the dynamic mechanisms study of nanomaterials formation and catalyst design.
Subject(s)
Alloys , Metal Nanoparticles , CatalysisABSTRACT
Cellulose aerogels are plagued by intermolecular hydrogen bond-induced structural plasticity, otherwise rely on chemicals modification to extend service life. Here, we demonstrate a petrochemical-free strategy to fabricate superelastic cellulose aerogels by designing hierarchical structures at multi scales. Oriented channels consolidate the whole architecture. Porous walls of dehydrated cellulose derived from thermal etching not only exhibit decreased rigidity and stickiness, but also guide the microscopic deformation and mitigate localized large strain, preventing structural collapse. The aerogels show exceptional stability, including temperature-invariant elasticity, fatigue resistance (â¼5 % plastic deformation after 105 â cycles), high angular recovery speed (1475.4° s-1 ), outperforming most cellulose-based aerogels. This benign strategy retains the biosafety of biomass and provides an alternative filter material for health-related applications, such as face masks and air purification.
ABSTRACT
Maximizing hole-transfer kinetics-usually a rate-determining step in semiconductor-based artificial photosynthesis-is pivotal for simultaneously enabling high-efficiency solar hydrogen production and hole utilization. However, this remains elusive yet as efforts are largely focused on optimizing the electron-involved half-reactions only by empirically employing sacrificial electron donors (SEDs) to consume the wasted holes. Using high-quality ZnSe quantum wires as models, we show that how hole-transfer processes in different SEDs affect their photocatalytic performances. We found that larger driving forces of SEDs monotonically enhance hole-transfer rates and photocatalytic performances by almost three orders of magnitude, a result conforming well with the Auger-assisted hole-transfer model in quantum-confined systems. Intriguingly, further loading Pt cocatalyts can yield either an Auger-assisted model or a Marcus inverted region for electron transfer, depending on the competing hole-transfer kinetics in SEDs.
ABSTRACT
Alkaline fuel cells can permit the adoption of platinum group metal-free (PGM-free) catalysts and cheap bipolar plates, thus further lowering the cost. With the exploration of PGM-free hydrogen oxidation reaction (HOR) catalysts, nickel-based compounds have been considered as the most promising HOR catalysts in alkali. Here we report an interfacial engineering through the formation of nickel-vanadium oxide (Ni/V2 O3 ) heterostructures to activate Ni for efficient HOR catalysis in alkali. The strong electron transfer from Ni to V2 O3 could modulate the electronic structure of Ni sites. The optimal Ni/V2 O3 catalyst exhibits a high intrinsic activity of 0.038â mA cm-2 and outstanding stability. Experimental and theoretical studies reveal that Ni/V2 O3 interface as the active sites can enable to optimize the hydrogen and hydroxyl bindings, as well as protect metallic Ni from extensive oxidation, thus achieving the notable activity and durability.
ABSTRACT
The oriented pore structure of wood endows it with a variety of outstanding properties, among which the low thermal conductivity has attracted researchers to develop wood-like aerogels as excellent thermal insulation materials. However, the increasing demands of environmental protection have put forward new and strict requirements for the sustainability of aerogels. Here, we report an all-natural wood-inspired aerogel consisting of all-natural ingredients and develop a method to activate the surface-inert wood particles to construct the aerogel. The obtained wood-inspired aerogel has channel structure similar to that of natural wood, endowing it with superior thermal insulation properties to most existing commercial sponges. In addition, remarkable fire retardancy and complete biodegradability are integrated. With the above outstanding performances, this sustainable wood-inspired aerogel will be an ideal substitute for the existing commercial thermal insulation materials.