ABSTRACT
Smart materials based on stimuli-fluorochromic π-conjugated solids (SFCSs) have aroused significant interest due to their versatile and exciting properties, leading to advanced applications. In this review, we highlight the recent developments in SFCS-based smart materials, expanding beyond organometallic compounds and light-responsive organic luminescent materials, with a discussion on the design strategies, exciting properties and stimuli-fluorochromic mechanisms along with their potential applications in the exciting fields of encryption, sensors, data storage, display, green printing, etc. The review comprehensively covers single-component and multi-component SFCSs as well as their stimuli-fluorochromic behaviors under external stimuli. We also provide insights into current achievements, limitations, and major challenges as well as future opportunities, aiming to inspire further investigation in this field in the near future. We expect this review to inspire more innovative research on SFCSs and their advanced applications so as to promote further development of smart materials and devices.
ABSTRACT
The development of efficient and low-cost catalysts for cathodic oxygen reduction reaction (ORR) in Zn-air battery (ZAB) is a key factor in reducing costs and achieving industrialization. Here, a novel segregated CoNiPt alloy embedded in N-doped porous carbon with a nanoflowers (NFs)-like hierarchy structure is synthesized through pyrolyzing Hofmann-type metal-organic frameworks (MOFs). The unique hierarchical NFs structure exposes more active sites and facilitates the transportation of reaction intermediates, thus accelerating the reaction kinetics. Impressively, the resulting 15% CoNiPt@C NFs catalyst exhibits outstanding alkaline ORR activity with a half-wave potential of 0.93 V, and its mass activity is 7.5 times higher than that of commercial Pt/C catalyst, surpassing state-of-the-art noble metal-based catalysts. Furthermore, the assembled CoNiPt@C+RuO2 ZAB demonstrates a maximum power density of 172 mW cm-2 , which is superior to that of commercial Pt/C+RuO2 ZAB. Experimental results reveal that the intrinsic ORR mass activity is attributed to the synergistic interaction between oxygen defects and pyrrolic/graphitic N species, which optimizes the adsorption energy of the intermediate species in the ORR process and greatly enhances catalytic activity. This work provides a practical and feasible strategy for synthesizing cost-effective alkaline ORR catalysts by optimizing the electronic structure of MOF-derived catalysts.
ABSTRACT
Pristine iron triad metal-organic frameworks (MOFs), i.e., Fe-MOFs, Co-MOFs, Ni-MOFs, and heterometallic iron triad MOFs, are utilized as versatile and promising cathodes for alkali metal-ion batteries, owing to their distinctive structure characteristics, including modifiable and designable composition, multi-electron redox-active sites, exceptional porosity, and stable construction facilitating rapid ion diffusion. Notably, pristine iron triad MOFs cathodes have recently achieved significant milestones in electrochemical energy storage due to their exceptional electrochemical properties. Here, the recent advances in pristine iron triad MOFs cathodes for alkali metal-ion batteries are summarized. The redox reaction mechanisms and essential strategies to boost the electrochemical behaviors in associated electrochemical energy storage devices are also explored. Furthermore, insights into the future prospects related to pristine iron triad MOFs cathodes for lithium-ion, sodium-ion, and potassium-ion batteries are also delivered.
ABSTRACT
The controllable self-assembly of conjugated homopolymers, especially homopolymers without other segments (a prerequisite for phase separation), which can afford chances to achieve tunable optical/electronic properties, remains a great challenge due to their poor solubility and has remained rarely documented. Herein, a conjugated homopolymer (DPPP-COOH) is synthesized, which has a unique brush-like structure with a conjugated dendritic poly-para-phenylene (DPPP) backbone and alkyl-carboxyl side chains at both edges of the backbone. The introduction of carboxyl makes the brush-like homopolymer exhibit pH-modulated 1D hierarchical self-assembly behavior in dilute solution, and allows for flexible morphological regulation of the assemblies, forming some uncommon superstructures including ultralong nanowires (at pH 7), superhelices (at pH 10) and "single-wall" nanotubes (at pH 13), respectively. Furthermore, the good aqueous dispersibility and 1D feature endow the superstructures formed in a high-concentration neutral solution with high broad-spectrum antibacterial performance superior to that of many conventional 1D materials.
ABSTRACT
The synthesis, crystal structure and room-temperature phosphorescence (RTP) of a 2D metal-free inorganic covalent framework ((H2en) [B5O8(OH)], named as CityU-12, and en represents for ethylenediamine) are reported. The precise structure information of CityU-12 has been disclosed through both single-crystal X-ray diffraction (SCXRD) analysis and low-dose high-resolution transmission electron microscopy (LD-HRTEM) study. The SCXRD results show that CityU-12 composes of 2D anionic BâO-based covalent inorganic frameworks with protonated ethylenediamine locating in the pore sites of 2D BâO layers while LD-HRTEM suggests that CityU-12 has an interplanar distance of 0.60 nm for (00 2 ¯ $\bar{2}$ ) crystal plane and 0.60 nm for (10 1 ¯ $\bar{1}$ ) crystal plane. The optical studies show that CityU-12 is an excellent nonconventional RTP material with the emission peak at 530 nm and a lifetime of 1.5 s. The quantum yield is 84.6% and the afterglow time is as long as 2.5 s. This work demonstrates that metal-free BâO frameworks can be promising nonconventional phosphors for RTP.
ABSTRACT
The heterotrophic nitrification aerobic denitrification bacteria (HNDS) can perform nitrification and denitrification at the same time. Two HNDS strains, Achromobacter sp. HNDS-1 and Enterobacter sp. HNDS-6 which exhibited an amazing ability to solution nitrogen (N) removal have been successfully isolated from paddy soil in our lab. When peptone or ammonium sulfate as sole N source, no significant difference in gene expression related to nitrification and denitrification of the strains was found according to the transcriptome analysis. The expression of phosphomethylpyrimidine synthase (thiC), ABC transporter substrate-binding protein, branched-chain amino acid ABC transporter substrate-binding protein, and RNA polymerase (rpoE) in HNDS-1 were significantly upregulated when used peptone as N source, while the expression of exopolysaccharide production protein (yjbE), RNA polymerase (rpoC), glutamate synthase (gltD) and ABC-type branched-chain amino acid transport systems in HNDS-6 were significantly upregulated. This indicated that these two strains are capable of using organic N and converting it into NH4+-N, then utilizing NH4+-N to synthesize amino acids and proteins for their own growth, and strain HNDS-6 can also remove NH4+-N through nitrification and denitrification.
Subject(s)
Denitrification , Gene Expression Profiling , Nitrification , Nitrogen , Nitrogen/metabolism , Soil Microbiology , Heterotrophic Processes , Aerobiosis , Bacterial Proteins/metabolism , Bacterial Proteins/genetics , Achromobacter/metabolism , Achromobacter/genetics , Achromobacter/isolation & purification , Transcriptome , Gene Expression Regulation, BacterialABSTRACT
Herein, we report the synthesis, crystal structure, and optical properties of a metal-free three-dimensional (3D) inorganic covalent framework ((H2en)[Si(B4O9)], named CityU-11, where H2en is the abbreviation for ethanediamine). With the assistance of a tiny amount of F- ions and the selection of SiO2 as Si sources, single crystals of CityU-11 can be successfully prepared under solvothermal conditions. The precise structure information on CityU-11 has been disclosed through both single-crystal X-ray diffraction (SCXRD) and low-dose high-resolution transmission electron microscopy (LD-HRTEM). The SCXRD results showed that CityU-11 crystallized in the noncentrosymmetric space group of Pnn2, while LD-HRTEM suggested that CityU-11 possessed almost the same interplanar distances of 0.6 nm for both (200) and (020) crystal planes, which finely matched with the double peaks of 2θ = 15° in the pattern of its powder X-ray diffraction (PXRD). CityU-11 also displayed an interesting optical property with a moderate birefringence of 0.0258@550 nm.
ABSTRACT
Soil nitrogen (N) transformation processes, encompassing denitrification, anaerobic ammonium oxidation (anammox), and anaerobic ammonium oxidation coupled with iron reduction (Feammox), constitute the primary mechanisms of soil dinitrogen (N2) loss. Despite the significance of these processes, there is a notable gap in research regarding the assessment of managed fertilization and irrigation impacts on anaerobic N transformations in paddy soil, crucial for achieving sustainable soil fertility management. This study addressed the gap by investigating the contributions of soil denitrification, anammox, and Feammox to N2 loss in paddy soil across varying soil depths, employing different fertilization and irrigation practices by utilizing N stable isotope technique for comprehensive insights. The results showed that anaerobic N transformation processes decreased with increasing soil depth under alternate wetting and drying (AWD) irrigation, but increased with the increasing soil depth under conventional continuous flooding (CF) irrigation. The denitrification and anammox rates varied from 0.41 to 2.12 mg N kg-1 d-1 and 0.062-0.394 mg N kg-1 d-1, respectively, which accounted for 84.3-88.1% and 11.8-15.7% of the total soil N2 loss. Significant correlations were found among denitrification rate and anammox rate (r = 0.986, p < 0.01), Fe (â ¢) reduction rate and denitrification rate (r = 0.527, p < 0.05), and Fe(â ¢) reduction rate and anammox rate (r = 0.622, p < 0.05). Moreover, nitrogen loss was more pronounced in the surface layer of the paddy soil compared to the deep layer. The study revealed that denitrification predominantly contributed to N loss in the surface soil, while Feammox emerged as a significant N loss pathway at depths ranging from 20 to 40 cm, accounting for up to 26.1% of the N loss. It was concluded that fertilization, irrigation, and soil depth significantly influenced anaerobic N transformation processes. In addition, the CF irrigation practice is best option to reduce N loss under managed fertilization. Furthermore, the role of microbial communities and their response to varying soil depths, fertilization practices, and irrigation methods could enhance our understanding on nitrogen loss pathways should be explored in future study.
Subject(s)
Agricultural Irrigation , Denitrification , Nitrogen , Soil , Nitrogen/metabolism , Nitrogen/analysis , Agricultural Irrigation/methods , Soil/chemistry , Anaerobiosis , Oryza/growth & development , Oryza/metabolism , Oxidation-Reduction , Soil Microbiology , Fertilizers/analysisABSTRACT
Alkali metals (e.g. Li, Na, and K) and multivalent metals (e.g. Zn, Mg, Ca, and Al) have become star anodes for developing high-energy-density rechargeable batteries due to their high theoretical capacity and excellent conductivity. However, the inevitable dendrites and unstable interfaces of metal anodes pose challenges to the safety and stability of batteries. To address these issues, covalent organic frameworks (COFs), as emerging materials, have been widely investigated due to their regular porous structure, flexible molecular design, and high specific surface area. In this minireview, we summarize the research progress of COFs in stabilizing metal anodes. First, we present the research origins of metal anodes and delve into their advantages and challenges as anodes based on the physical/chemical properties of alkali and multivalent metals. Then, special attention has been paid to the application of COFs in the host design of metal anodes, artificial solid electrolyte interfaces, electrolyte additives, solid-state electrolytes, and separator modifications. Finally, a new perspective is provided for the research of metal anodes from the molecular design, pore modulation, and synthesis of COFs.
ABSTRACT
Extending covalent organic frameworks (COFs) into crystalline carbon-free covalent backbones is an important strategy to endow these materials with more exotic functions. Integrating metal-free inorganic and organic components into one covalent framework is an effective way to address the issue of poor thermal/solvent stability in the field of nonlinear optics (NLO). However, constructing such structures is very challenging. Here, we linked 3-connected nods (BO3) and 2-connected organic building blocks (Te(Ph)2) together to produce colorless single crystals (size up to 400 µm) of a three-dimensional (3D) chiral covalent framework (CityU-22). The single-crystal X-ray diffraction (SCXRD) analysis reveals that CityU-22 has a non-carbon Te-O-B-O bond-based network with the srs topology. The chiral CityU-22 displays good stability under the treatment of different common solvents or heat (the decomposition temperature above 300 °C). Due to its non-π-conjugated backbone (-Te-O-B-O-), CityU-22 shows an ultraviolet NLO behavior with a second-harmonic generation (SHG) response similar to KH2PO4 (KDP).
ABSTRACT
Realizing high-rate and high-capacity features of Lihium-organic batteries is essential for their practical use but remains a big challenge, which is due to the instrinsic poor conductivity, limited redox kinetics and low utility of organic electrode mateials. This work presents a well-designed donor-acceptor Covalent Organic Framework (COFs) with extended conjugation, mesoscale porosity, and dual redox-active centers to promote fast charge transfer and multi-electron processes. As anticipated, the prepared cathode with benzo [1,2-b:3,4-b':5,6-b''] trithiophene (BTT) as p-type and pyrene-4,5,9,10-tetraone (PTO) as n-type material (BTT-PTO-COF) delivers impressive specific capacity (218 mAh g-1 and 275 mAh g-1 at 0.2 A g-1 in ether-based and carbonate-based electrolyte respectively) and outstanding rate capability (79 mAh g-1 at 50 A g-1 in ether-based electrolyte and 124 mAh g-1 at 10 A g-1 in carbonate-based electrolyte). Moreover, the potential of BTT-PTO-COF electrode for prototype batteries has been demonstrated by full cells of dual-ion batteries, which attain comparable electrochemical performances to the half cells. Moreover, mechanism studies combining ex-situ characterization and theoratical calculations reveal the efficient dual-ion storage process and facile charge transfer of BTT-PTO-COF. This work not only expands the diversity of redox-active COFs but also provide concept of structure design for high-rate and high-capacity organic electrodes.
ABSTRACT
Helical morphologies are widely observed in nature, however, it is very challenging to prepare artificial helical polymers. Especially, precisely understanding the structure information of artificial metal-free helical covalent inorganic polymers via single-crystal X-ray diffraction (SCXRD) analysis is rarely explored. Here, we successfully prepare a novel metal-free helical covalent inorganic polymer ({[Te(C6 H5 )2 ] [PO3 (OH)]}n , named CityU-10) by introducing angular anions (HOPO3 2- ) into traditional tellurium-oxygen chains. The dynamic reversibility of the reaction is realized through the introduction of organic tellurium precursor and the slow hydrolysis of polyphosphoric acid. High-quality and large-size single crystals of CityU-10 have been successfully characterized via SCXRD, where the same-handed helical inorganic polymer chains form a pseudo-two-dimensional layer via multiple hydrogen-bonding interactions. The left-handed layers and right-handed layers alternatively stack together through weak hydrogen bonds to form a three-dimensional supramolecular structure. The single crystals of CityU-10 are found to display promising optical properties with a large birefringence. Our results would offer new guidelines for designing and preparing new crystalline covalent polymers through tellurium-based chemistry.
ABSTRACT
Organic piezoelectric nanogenerators (PENGs) are attractive in harvesting mechanical energy for various self-powering systems. However, their practical applications are severely restricted by their low output open circuit voltage. To address this issue, herein, we prepared two two-dimensional (2D) covalent organic frameworks (COFs, CityU-13 and CityU-14), functionalized with fluorinated alkyl chains for PENGs. The piezoelectricity of both COFs was evidenced by switchable polarization, characteristic butterfly amplitude loops, phase hysteresis loops, conspicuous surface potentials and high piezoelectric coefficient value (d33). The PENGs fabricated with COFs displayed highest output open circuit voltages (60â V for CityU-13 and 50â V for CityU-14) and delivered satisfactory short circuit current with an excellent stability of over 600 seconds. The superior open circuit voltages of CityU-13 and CityU-14 rank in top 1 and 2 among all reported organic materials-based PENGs.
ABSTRACT
The multiple mortise-and-tenon joint parts are the core factors to provide the structural stability and diversity of Chinese Luban locks; however, constructing such structures is very challenging. Herein, single crystals of a covalent organic nanoribbon (named CityU-27) are prepared through the assembly of hexahydroxytriphenylene (HHTP), 4,4'-vinylenedipyridine (BYE), and phenylboronic acid (BA) together through dative boronânitrogen (BâN) bonds. The single-crystal X-ray diffraction analysis indicates that CityU-27 has a covalent organic nanoribbon structure, where each nanoribbon forms multiple and tight π-π interactions with four neighboring others to generate a Luban lock-like configuration. CityU-27 has been demonstrated to be an efficient photocatalyst in a one-pot tandem reaction of hydrogen evolution reaction (HER) and semi-hydrogenation reaction of alkynes in series to produce olefins without any additional photosensitizers and co-catalysts (metal-free).
ABSTRACT
Inspired by dative boron-nitrogen (BâN) bonds proven to be the promising dynamic linkage for the construction of crystalline covalent organic polymers/frameworks (COPs/COFs), we employed 1,4-bis(benzodioxaborole) benzene (BACT) and N,N'-Di(4-pyridyl)-1,4,5,8-naphthalenetetracarboxdiimide (DPNTCDI) as the corresponding building blocks to construct a functional COP (named as CityU-25), which had been employed as an anode in rechargeable lithium ion batteries. CityU-25 displayed an excellent reversible lithium storage capability of 455â mAh/g after 170 cycles at 0.1â A/g, and an impressive one of 673â mAh/g after 720 cycles at 0.5â A/g. These findings suggest that CityU-25 is a standout candidate for advanced battery technologies, highlighting the potential application of this type of materials.
ABSTRACT
Developing diverse synthetic routes to prepare various crystalline covalent organic frameworks (COFs) and enrich the family of COFs is very important and highly desirable. In this research, we demonstrate that Kröhnke oxidation (originally developed to prepare carbonyl compounds) can be employed as an efficient method to construct two crystalline nitrone-linked COFs (CityU-1 and CityU-2) through the ingenious design of the polynitroso-containing precursors as well as the exquisite control of the polymerization conditions. The formation and structure of nitrone-based linkage units have been confirmed through a mode reaction. The as-obtained crystalline COFs have been characterized by Fourier transform infrared and X-ray photoelectron spectroscopy, powder X-ray diffraction patterns, and scanning electron microscopy. Notably, CityU-1 exhibits a BET specific surface area of 497.9 m2g-1 with an I2 capture capacity of 3.0 g g-1 at 75 °C. Our research would provide more chances to prepare various crystalline COFs for diverse applications.
ABSTRACT
Nanocomposites containing Ni or Co or NiCo alloy and nitrogen-doped carbon with diverse ratios have been prepared and utilized as active elements in supercapacitors. The atomic contents of nitrogen, nickel, and cobalt have been adjusted by the supplement amount of Ni and Co salts. In virtue of the excellent surface groups and rich redox active sites, the NC/NiCo active materials exhibit superior electrochemical charge-storage performances. Among these as-prepared active electrode materials, the NC/NiCo1/1 electrode performs better than other bimetallic/carbon electrodes and pristine metal/carbon electrodes. Several characterization methods, kinetic analyses, and nitrogen-supplement strategies determine the specific reason for this phenomenon. As a result, the better performance can be ascribed to a combination of factors including the high surface area and nitrogen content, proper Co/Ni ratio, and relatively low average pore size. The NC/NiCo electrode delivers a maximum capacity of 300.5 C g-1 and superior capacity retention of 92.30% after 3000 unceasing charge-discharge cycles. After assembling it into the battery-supercapacitor hybrid device, a high energy density of 26.6 Wh kg-1 (at 412 W kg-1 ) is achieved, comparable to the recent reports. Furthermore, this device can also power four light-emitting-diode (LED) demos, suggesting the potential practicability of these N-doped carbon compositing with bimetallic materials.
ABSTRACT
The metallic sodium (Na) is characterized by high theoretical specific capacity, low electrode potential and abundant resources, and its advantages manifests itself as a promising candidate anode of sodium metal batteries (SMBs). However, the vaporization during the plating/stripping or uncontrolled growth of sodium dendrites in sodium metal anodes (SMAs) has posed major challenges to its practical applications. To address this issue, here, the SnO2 /Ti3 C2 Tx composite is rationally fabricated, in which sodiophilic SnO2 nanoparticles are in situ dispersed on the 2D Ti3 C2 Tx , providing the acceptor sites of Na+ that can control vaporization and dendrites. The SnO2 /Ti3 C2 Tx composite anode exhibits smooth and homogeneous morphology after Na-metal deposition cycles, stable Coulombic efficiency (CE) of half cells, long stable cycles of symmetric cells due to highly sodiophilic sites, and confinement effect. In addition, the full cells assembled with Na0.6 MnO2 also show excellent rate performance and cycling performance. These discoveries demonstrate the effectiveness of the acceptor sites and the confinement effect provided by the SnO2 /Ti3 C2 Tx composite, and thus provide an additional degree of freedom for designing SMBs.
ABSTRACT
Organic spintronics has caused a huge revolution in creating highly efficient low-power circuits. Spin manipulation in organic cocrystals has become a promising strategy to uncover more chemicophysical properties for diverse applications. In this Minireview, we summarize the recent advancements of spin properties in organic charge-transfer cocrystals, and briefly describe the possible mechanisms behind them. Beside the known spin properties (spin multiplicity, mechanoresponsive spin, chiral orbit and spin-crossover) in binary/ternary cocrystals, other spin phenomena in radical cocrystals and spin transport are also summarized and discussed. Hopefully, deep understanding of current achievements, challenges and perspectives will offer the clear direction for the introduction of spin in organic cocrystals.
ABSTRACT
Singlet fission (SF) has been proven to be an effective strategy to overcome the Shockley-Queisser limit of photovoltaics. However, the materials suitable for SF are relatively rare due to the strict requirements for the occurrence of this process. In the present study, we report the first preparation of two heteroatoms (O and S)-doped polycyclic aromatic hydrocarbons (PAHs) molecules with (ß, ß) connected furan/thiophene ring. The optical and physiochemical properties of both compounds are investigated by a variety of spectroscopies, including UV-vis absorption, photoluminescence and cyclic voltammetry. In addition, their ultrafast excited state dynamics are studied by femtosecond transient absorption. Experimental data showed that the singlet fission efficiency was improved by 2â times when replacing oxygen with sulfur atom, which could provide some guidelines in designing singlet fission materials with better efficiency.