ABSTRACT
In this work, a mixed precursor solvent system comprising isopropyl alcohol (IPA) and 2-methoxy ethanol (MOE) is introduced for the fabrication of Cu2ZnSn(S, Se)4 (CZTSSe) thin films under ambient conditions. The effects of different IPA/(MOE + IPA) ratios on the characteristics of CZTSSe films and the corresponding devices were investigated. Our research results indicate that the addition of IPA enhances the wettability of Cu-Zn-Sn-S precursor solution on the substrate, reduces Sn loss in the film during high-temperature annealing, and diminishes band tail states. Additionally, adding IPA leads to effective enlargement of grain size, improved crystallinity, and enhanced light absorption. However, excessive content of IPA negatively impacts CZTSSe film properties and the device's performance. Notably, when substituting 20% of MOE with IPA, the short-circuit current density (JSC) increased from 30.84 mA cm-2 to 35.55 mA cm-2 in the resulting CZTSSe device, and the efficiency improved from 9.19% to 10.63%. This work provides a new method of a solvent system for preparing efficient kesterite-based solar cells.
ABSTRACT
The removal of various pollutants from water is necessary due to the increasing requirements for the removal of various pollutants from wastewater and the quality of drinking water. Polymer microspheres are regarded as exemplary adsorbent materials due to their high adsorption efficiency, excellent adsorption performance, and ease of handling. Herein, the advantages and disadvantages of different preparation methods, modifications, applications and the current research status of polymer microspheres are summarized at large. Furthermore, the enhanced performance of modified composite microspheres is emphasized, including adsorption efficiency, thermal stability, and significant improvements in physical and chemical properties. Subsequently, the current applications and potential of polymeric microspheres for wastewater treatment, including the removal of inorganic and organic pollutants, heavy metal ions, and other contaminants are summarized. Finally, future research directions for polymer microspheres are proposed, outlining the challenges and solutions associated with the application of polymer microspheres in wastewater treatment.
Subject(s)
Microspheres , Polymers , Wastewater , Water Pollutants, Chemical , Water Purification , Polymers/chemistry , Wastewater/chemistry , Water Purification/methods , Adsorption , Water Pollutants, Chemical/chemistry , Metals, Heavy/chemistry , Waste Disposal, Fluid/methodsABSTRACT
A series of NH2-functionalized nano-sized magnetic metal-organic frameworks (MOFs) were prepared in this study for Cr(VI) removal from wastewater. It was observed that not only the morphological, i.e., orientation growth of N-doped and iron-based metal-organic frameworks, but also the adsorption of magnetic MOFs is largely related to the used amount of ammonium hydroxide in preparation. For example, with increasing amounts of ammonium hydroxide used in preparation, the morphology of magnetic MOFs changed from spherical to cube and triangular cone. Moreover, the maximum adsorption capacity of spherical-magnetic MOFs, cubic-magnetic MOFs and triangular cone-magnetic MOFs could be up to 204.08 mg/g, 232.56 mg/g and 270.27 mg/g, respectively. Under optimal conditions, the adsorption process of magnetic MOFs for Cr(VI) was consistent with the pseudo-second-order rate equation (R2 = 1) and Langmuir isotherm model (R2 > 0.99). Therefore, magnetic MOFs developed in this work offered a viable option for the removal of Cr(VI) from wastewater.
ABSTRACT
A novel magnetic nanomaterial with Fe3O4 as the core, PS-DVB as the shell layer, and the surface modified with C18 (C18-PS-DVB-Fe3O4) had been synthesized by seeded emulsion polymerization. C18-PS-DVB-Fe3O4 retains the advantages of the chemical stability, large porosity, and uniform morphology of organic polymers and has the magnetic properties of Fe3O4. A simple, flexible, and efficient magnetic dispersive solid phase extraction (Mag-dSPE) method for the extraction of preservatives, sweeteners, and colorants in river water was established. C18-PS-DVB-Fe3O4 was used as an adsorbent for Mag-dSPE and was coupled with high-performance liquid chromatography (HPLC) to detect 11 food additives: acesulfame, amaranth, benzoic acid, tartrazine, saccharin sodium, sorbic acid, dehydroacetic acid, sunset yellow, allura red, brilliant blue, and erythrosine. Under the optimum extraction conditions, combined with ChromCoreTMAQC18 (5 µm, 4.6 × 250 mm), 20 mmol/L ammonium acetate aqueous solution and methanol were used as mobile phases, and the detection wavelengths were 240 nm and 410 nm. The limits of detection (LODs) of 11 food additives were 0.6-3.1 µg/L with satisfactory recoveries ranging from 86.53% to 106.32%. And the material could be reused for five cycles without much sacrifice of extraction efficiency. The proposed method has been used to determine food additives in river water samples, and results demonstrate the applicability of the proposed C18-PS-DVB-Fe3O4 Mag-dSPE coupled with the HPLC method to environment monitoring analysis.
ABSTRACT
The unique properties of ionic liquids (ILs), such as structural tunability, good solubility, chemical/thermal stability, favorable biocompatibility, and simplicity of preparation, have led to a wide range of applications in the pharmaceutical and biomedical fields. ILs can not only speed up the chemical reaction process, improve the yield, and reduce environmental pollution but also improve many problems in the field of medicine, such as the poor drug solubility, product crystal instability, poor biological activity, and low drug delivery efficiency. This paper presents a systematic and concise analysis of the recent advancements and further applications of ILs in the pharmaceutical field from the aspects of drug synthesis, drug analysis, drug solubilization, and drug crystal engineering. Additionally, it explores the biomedical field, covering aspects such as drug carriers, stabilization of proteins, antimicrobials, and bioactive ionic liquids.
ABSTRACT
Background: Hyperuricemia (HUA) is a glo\bal public health problem. The etiology of HUA is complex and efficient and accurate assessment metrics are still lacking when conducting large-scale epidemiologic screening. The aim of this study was to evaluate the association of the triglyceride glucose (TyG) index, TyG-body mass index (BMI), TyG-waist-to-height ratio (WHtR) with the risk of HUA. Methods: Based on data collected from the National Health and Nutrition Examination Survey (NHANES) in the United States and the China Health and Aging Longitudinal Study (CHARLS) in China, a total of 14,286 U.S. adults and 4,620 Chinese adults were included in the analysis. The study examined the levels of TyG, TyG-BMI, TyG-WHtR, and TyG-WC. Multivariate logistic regression was utilized to investigate the relationships between these variables and hyperuricemia (HUA), separately. Additionally, the study used restricted cubic splines (RCS) to explore the linear associations of TyG, TyG-BMI, TyG-WHtR, TyG-WC, and HUA, separately. Results: The NHANES results showed that TyG [Q2, 1.58(1.26, 1.98); Q3, 2.36 (1.94, 2.88); Q4, 3.21 (2.61, 3.94)], TyG-BMI [Q2, 2.14 (1.74, 2.65); Q3, 3.38 (2.74, 4.17); Q4, 6.70 (5.55, 8.02)], TyG-WHtR [Q2, 1.92 (1.56, 2.36); Q3, 3.14 (2.56, 3.85); Q4, 6.28 (5.12, 7.69)], TyG-WC [Q2, 2.32 (1.85, 2.90); Q3, 3.51 (2.84, 4.34); Q4, 7.32 (5.95, 9.02)] were identified as risk factors for hyperuricemia (HUA). Similarly, the CHARLS results, when fully adjusted for covariates, indicated that TyG [Q4, 2.36 (1.08, 5.15)], TyG-BMI [Q3, 2.60 (1.05, 6.41); Q4, 3.70 (1.64, 8.32)], TyG-WHtR (Q4, 2.84 (1.23, 6.55), TyG-WC [Q4, 2.85 (1.23, 6.5)] were also risk factors for HUA. The predictive ability of each indicator for the risk of developing HUA was stronger in women than in men. Furthermore, there was an observed nonlinear relationship between TyG, TyG-BMI, TyG-WHtR, TyG-WC, and HUA in both the NHANES and CHARLS datasets (P-nonlinearity < 0.05). Conclusion: These findings suggest that TyG, TyG-BMI, TyG-WHtR and TyG-WC are associated with an increased risk of HUA. They are potential indicators for screening HUA status in the general population in China and the United States.
Subject(s)
Blood Glucose , Body Mass Index , Hyperuricemia , Nutrition Surveys , Triglycerides , Humans , Hyperuricemia/blood , Hyperuricemia/epidemiology , Hyperuricemia/diagnosis , China/epidemiology , Male , Female , Triglycerides/blood , United States/epidemiology , Middle Aged , Adult , Blood Glucose/analysis , Aged , Longitudinal Studies , Risk FactorsABSTRACT
AIMS: This study aimed to compare the clinical outcomes and safety of endovascular treatment (EVT) in patients with primary versus secondary medium vessel occlusion (MeVO). METHODS: From the endovascular treatment for acute ischemic stroke in the China registry, we collected consecutive patients with MeVO who received EVT. The primary endpoint was a good outcome, defined as a modified Rankin Scale (mRS) 0 to 2 at 90 days. RESULTS: 154 patients were enrolled in the final analysis, including 74 primary MeVO and 80 secondary MeVO. A good outcome at 90 days was achieved in 42 (56.8%) patients with primary MeVO and 33 (41.3%) patients with secondary MeVO. There was a higher probability of good outcomes in patients with the primary vs secondary MeVO (adjusted odds ratio, 2.16; 95% confidence interval, 1.04 to 4.46; p = 0.04). There were no significant differences in secondary and safety outcomes between MeVO groups. In the multivariable analysis, baseline ASPECTS (p = 0.001), final modified thrombolysis in cerebral infarction score (p = 0.01), and any ICH (p = 0.03) were significantly associated with good outcomes in primary MeVO patients, while baseline National Institutes of Health Stroke Scale (p = 0.002), groin puncture to recanalization time (p = 0.02), and early neurological improvement (p < 0.001) were factors associated with good outcome in secondary MeVO patients. CONCLUSION: In MeVO patients who received EVT, there was a higher likelihood of poor outcomes in patients with secondary versus primary MeVO.
Subject(s)
Brain Ischemia , Endovascular Procedures , Ischemic Stroke , Stroke , United States , Humans , Stroke/surgery , Stroke/etiology , Brain Ischemia/surgery , Brain Ischemia/etiology , Treatment OutcomeABSTRACT
Because of the "enterohepatic circulation" of bile acid, liver damage can be reflected by monitoring the content of bile acid in the serum of the organism. To monitor the concentration of 15 bile acids in plasma samples, a new technique of PRiME (process, ruggedness, improvement, matrix effect, ease of use) pass-through cleanup procedure combined with high performance liquid chromatography-tandem quadrupole mass spectrometry (HPLC-MS/MS) was developed. The sorbent used in the PRiME pass-through cleanup procedure is a new type of magnetic organic resin composite nano-material modified by C18 (C18-PS-DVB-GMA-Fe3O4), which has high cleanup efficiency of plasma samples. It also shows good performance in the separation and analysis of 15 kinds of bile acids. Under the optimal conditions, the results show higher cleanup efficiency of C18-PS-DVB-GMA-Fe3O4 with recoveries in the range of 82.1-115 %. The limit of quantitative (LOQs) of 15 bile acids were in the range of 0.033 µg/L-0.19 µg/L, and the RSD values of 15 bile acids were in the range of 3.00-11.9 %. Validation results on linearity, specificity, accuracy and precision, as well as on the application to analysis of 15 bile acids in 100 human plasma samples demonstrate the applicability to clinical studies.
Subject(s)
Bile Acids and Salts , Limit of Detection , Nanocomposites , Tandem Mass Spectrometry , Humans , Bile Acids and Salts/blood , Bile Acids and Salts/chemistry , Tandem Mass Spectrometry/methods , Nanocomposites/chemistry , Chromatography, High Pressure Liquid/methods , Reproducibility of Results , Polymers/chemistry , Magnetite Nanoparticles/chemistryABSTRACT
Although oil and gas from coaly source rocks have been widely discovered worldwide, the role of oil generated from coal measures in marine-continental coaly deposits during the Carboniferous-Permian period in the Bohai Bay Basin has long been a subject of debate. The recent discovery of a condensate reservoir in the Wumaying buried hill within the Huanghua Depression of the Bohai Bay Basin offers new potential insights into this issue. In this study, we employed organic geochemical methods to explore the possibility of the Carboniferous-Permian coal deposit being a primary source of the condensate. The distribution of light hydrocarbons and the biomarker assemblage indicate that the condensate did not undergo significant secondary alterations such as thermal cracking, gas invasion fractionation, or biodegradation. The hydrocarbon generation potential of the Carboniferous-Permian coaly source rocks suggests that they could be an important contributor to the formation of condensate. High pristine/phytane ratios (1.0-7.5), an abundant presence of benzene series, and the dominance of C29 steranes (>50%) within the condensate could be indicative of coaly organic matter. These features are comparable to those found in coaly source rocks. Moreover, the stable carbon isotopic compositions of n-alkanes in the condensate, ranging from -26.0 to -30.0, correlate well with those from coaly mudstone (-25.4 to -30.0). This suggests that the condensate of the Wumaying buried hill may predominantly originate from the Carboniferous-Permian coaly mudstone. When integrated with the geological background, the results distinctly demonstrate that the Carboniferous-Permian coaly source rocks have significantly contributed to the formation of the condensate reservoir in the Wumaying buried hill. This provides an essential reference for future exploration of oil and gas resources derived from the carboniferous-Permian coaly source rocks in the Bohai Bay Basin.
ABSTRACT
The Chinese Bayan Obo deposit is a world-class rare earth element (REE) deposit with considerable niobium (Nb) and iron (Fe) resources. A complete genetic understanding on all metals is fundamental for establishing genetic models at Bayan Obo. With extensive research being focused on REE enrichment, the timing and controls of Nb enrichment remain unresolved at Bayan Obo, which is mainly due to the challenges in dating, i.e. multistage thermal events, fine-grained minerals with complex textures and the rare occurrence of uranium-enriched minerals with mature dating methods. Based on robust geological and petrographic frameworks, here we conducted ion probe uranium-lead (U-Pb) dating of ferrocolumbite to unravel the timing, hence the genesis of Nb mineralization. Three types of hydrothermal ferrocolumbites-key Nb-bearing minerals-are identified based on their textures and mineral assemblages. They yield U-Pb ages of 1312 ± 47 Ma (n = 99), 438 ± 7 Ma (n = 93), and 268 ± 5 Ma (n = 19), respectively. In line with deposit geology, we tentatively link the first, second and third stage Nb mineralization to Mesoproterozoic carbonatite magmatism, ubiquitous early Paleozoic hydrothermal activity, and Permian granitic magmatism, respectively. While quantifying the contribution of metal endowment from each stage requires further investigation, our new dates highlight that multi-stage mineralization is critical for Nb enrichment at Bayan Obo, which may also have implications for the enrichment mechanism of Nb in REE deposits in general.
ABSTRACT
Bone, renowned for its elegant hierarchical structure and unique mechanical properties, serves as a constant source of inspiration for the development of synthetic materials. However, achieving accurate replication of bone features in artificial materials with remarkable structural and mechanical similarity remains a significant challenge. In this study, we employed a cascade of continuous fabrication processes, including biomimetic mineralization of collagen, bidirectional freeze-casting, and pressure-driven fusion, to successfully fabricate a macroscopic bulk material known as artificial compact bone (ACB). The ACB material closely replicates the composition, hierarchical structures, and mechanical properties of natural bone. It demonstrates a lamellated alignment of mineralized collagen (MC) microfibrils, similar to those found in natural bone. Moreover, the ACB exhibits a similar high mineral content (70.9 %) and density (2.2 g/cm3) as natural cortical bone, leading to exceptional mechanical properties such as high stiffness, hardness, and flexural strength that are comparable to those of natural bone. Importantly, the ACB also demonstrates excellent mechanical properties in wet, outstanding biocompatibility, and osteogenic properties in vivo, rendering it suitable for a broad spectrum of biomedical applications, including orthopedic, stomatological, and craniofacial surgeries.
ABSTRACT
Magnetic tunnel junctions (MTJs) are the core elements of spintronic devices. Now, the mainstream writing operation of MTJs mainly relies on electric current with high energy dissipation, which can be greatly reduced if an electric field is used instead. In this regard, strain-mediated multiferroic heterostructure composed of MTJ and ferroelectrics are promising with the advantages of room temperature and magnetic field-free as already demonstrated by MTJ with in-plane magnetic anisotropy. However, there is no such report on the perpendicular MTJs (p-MTJs), which have been commercialized. Here, we investigate electric-field control of resistance state of MgO-based p-MTJs in multiferroic heterostructures. A remarkable and nonvolatile manipulation of resistance is demonstrated at room temperature without magnetic field assistance. Through various characterizations and micromagnetic simulation, the manipulation mechanism is uncovered. Our work provides an effective avenue for manipulating p-MTJ resistance by electric fields and is notable for high density and ultralow power spintronic devices.
ABSTRACT
Magnetic tunnel junctions (MTJs) are the core element of spintronic devices. Currently, the mainstream writing operation of MTJs is based on electric current with high energy dissipation, and it can be notably reduced if an electric field is used instead. In this regard, it is promising for electric field control of MTJ in the multiferroic heterostructure composed of MTJ and ferroelectrics via strain-mediated magnetoelectric coupling. However, there are only reports on MTJs with in-plane anisotropy so far. Here, we investigate electric field control of the resistance state of MgO-based perpendicular MTJs with easy-cone anisotropic free layers through strain-mediated magnetoelectric coupling in multiferroic heterostructures. A remarkable, nonvolatile, and reversible modulation of resistance at room temperature is demonstrated. Through local reciprocal space mapping under different electric fields for Pb(Mg1/3Nb2/3)0.7Ti0.3O3 beneath the MTJ pillar, the modulation mechanism is deduced. Our work represents a crucial step toward electric field control of spintronic devices with non-in-plane magnetic anisotropy.