Transcriptome analysis of Gossypium hirsutum cultivar Zhongzhimian No.2 uncovers the gene regulatory networks involved in defense against Verticillium dahliae.

BACKGROUND: Cotton is globally important crop. Verticillium wilt (VW), caused by Verticillium dahliae, is the most destructive disease in cotton, reducing yield and fiber quality by over 50% of cotton acreage. Breeding resistant cotton cultivars has proven to be an efficient strategy for improving the resistance of cotton to V. dahliae. However, the lack of understanding of the genetic basis of VW resistance may hinder the progress in deploying elite cultivars with proven resistance. RESULTS: We planted the VW-resistant Gossypium hirsutum cultivar Zhongzhimian No.2 (ZZM2) in an artificial greenhouse and disease nursery. ZZM2 cotton was subsequently subjected to transcriptome sequencing after Vd991 inoculation (6, 12, 24, 48, and 72 h post-inoculation). Several differentially expressed genes (DEGs) were identified in response to V. dahliae infection, mainly involved in resistance processes, such as flavonoid and terpenoid quinone biosynthesis, plant hormone signaling, MAPK signaling, phenylpropanoid biosynthesis, and pyruvate metabolism. Compared to the susceptible cultivar Junmian No.1 (J1), oxidoreductase activity and reactive oxygen species (ROS) production were significantly increased in ZZM2. Furthermore, gene silencing of cytochrome c oxidase subunit 1 (COX1), which is involved in the oxidation-reduction process in ZZM2, compromised its resistance to V. dahliae, suggesting that COX1 contributes to VW resistance in ZZM2. CONCLUSIONS: Our data demonstrate that the G. hirsutum cultivar ZZM2 responds to V. dahliae inoculation through resistance-related processes, especially the oxidation-reduction process. This enhances our understanding of the mechanisms regulating the ZZM2 defense against VW.

Gas Sensing Properties of PLD Grown 2D SnS Film: Effect of Film Thickness, Metal Nanoparticle Decoration, and In Situ KPFM Investigation.

This study employs novel growth methodologies and surface sensitization with metal nanoparticles to enhance and manipulate gas sensing behavior of two-dimensional (2D)SnS film. Growth of SnS films is optimized by varying substrate temperature and laser pulses during pulsed laser deposition (PLD). Thereafter, palladium (Pd), gold (Au), and silver (Ag) nanoparticles are decorated on as-grown film using gas-phase synthesis techniques. X-ray diffraction (XRD), Raman spectroscopy, and Field-emission scanning electron microscopy (FESEM) elucidate the growth evolution of SnS and the effect of nanoparticle decoration. X-ray photoelectron spectroscopy (XPS) analyses the chemical state and composition. Pristine SnS, Ag, and Au decorated SnS films are sensitive and selective toward NO2 at room temperature (RT). Ag nanoparticle increases the response of pristine SnS from 48 to 138% toward 2 ppm NO2, which indicates electronic and chemical sensitization effect of Ag. Pd decoration on SnS tunes its selectivity toward H2 gas with a response of 55% toward 70 ppm H2 and limit of detection (LOD) < 1 ppm. In situ Kelvin probe force microscopy (KPFM) maps the work function changes, revealing catalytic effect of Ag toward NO2 in Ag-decorated SnS and direct charge transfer between Pd and SnS during H2 exposure in Pd-decorated SnS.

Multi-Functional Applications of H-Glass Embedded with Stable Plasmonic Gold Nanoislands.

Metal nanoparticles (MNPs) are synthesized using various techniques on diverse substrates that significantly impact their properties. However, among the substrate materials investigated, the major challenge is the stability of MNPs due to their poor adhesion to the substrate. Herein, it is demonstrated how a newly developed H-glass can concurrently stabilize plasmonic gold nanoislands (GNIs) and offer multifunctional applications. The GNIs on the H-glass are synthesized using a simple yet, robust thermal dewetting process. The H-glass embedded with GNIs demonstrates versatility in its applications, such as i) acting as a room temperature chemiresistive gas sensor (70% response for NO2 gas); ii) serving as substrates for surface-enhanced Raman spectroscopy for the identifications of Nile blue (dye) and picric acid (explosive) analytes down to nanomolar concentrations with enhancement factors of 4.8 × 106 and 6.1 × 105 , respectively; and iii) functioning as a nonlinear optical saturable absorber with a saturation intensity of 18.36 × 1015 W m-2 at 600 nm, and the performance characteristics are on par with those of materials reported in the existing literature. This work establishes a facile strategy to develop advanced materials by depositing metal nanoislands on glass for various functional applications.

Facile Construction of CuFe-Based Metal Phosphides for Synergistic NOx -Reduction to NH3 and Zn-Nitrite Batteries in Electrochemical Cell.

The electrocatalytic nitrite/nitrate reduction reaction (eNO2RR/eNO3RR) offer a promising route for green ammonia production. The development of low cost, highly selective and long-lasting electrocatalysts for eNO2RR/eNO3RR is challenging. Herein, a method is presented for constructing Cu3P-Fe2P heterostructures on iron foam (CuFe-P/IF) that facilitates the effective conversion of NO2 - and NO3 - to NH3. At -0.1 and -0.2 V versus RHE (reversible hydrogen electrode), CuFe-P/IF achieves a Faradaic efficiency (FE) for NH3 production of 98.36% for eNO2RR and 72% for eNO3RR, while also demonstrating considerable stability across numerous cycles. The superior performance of CuFe-P/IF catalyst is due tothe rich Cu3P-Fe2P heterstuctures. Density functional theory calculations have shed light on the distinct roles that Cu3P and Fe2P play at different stages of the eNO2RR/eNO3RR processes. Fe2P is notably active in the early stages, engaging in the capture of NO2 -/NO3 -, O─H formation, and N─OH scission. Conversely, Cu3P becomes more dominant in the subsequent steps, which involve the formation of N─H bonds, elimination of OH* species, and desorption of the final products. Finally, a primary Zn-NO2 - battery is assembled using CuFe-P/IF as the cathode catalyst, which exhibits a power density of 4.34 mW cm-2 and an impressive NH3 FE of 96.59%.

Atmospheric nitrogen dioxide suppresses the activity of phytochrome interacting factor 4 to suppress hypocotyl elongation.

MAIN CONCLUSION: Ambient concentrations of atmospheric nitrogen dioxide (NO2) inhibit the binding of PIF4 to promoter regions of auxin pathway genes to suppress hypocotyl elongation in Arabidopsis. Ambient concentrations (10-50 ppb) of atmospheric nitrogen dioxide (NO2) positively regulate plant growth to the extent that organ size and shoot biomass can nearly double in various species, including Arabidopsis thaliana (Arabidopsis). However, the precise molecular mechanism underlying NO2-mediated processes in plants, and the involvement of specific molecules in these processes, remain unknown. We measured hypocotyl elongation and the transcript levels of PIF4, encoding a bHLH transcription factor, and its target genes in wild-type (WT) and various pif mutants grown in the presence or absence of 50 ppb NO2. Chromatin immunoprecipitation assays were performed to quantify binding of PIF4 to the promoter regions of its target genes. NO2 suppressed hypocotyl elongation in WT plants, but not in the pifq or pif4 mutants. NO2 suppressed the expression of target genes of PIF4, but did not affect the transcript level of the PIF4 gene itself or the level of PIF4 protein. NO2 inhibited the binding of PIF4 to the promoter regions of two of its target genes, SAUR46 and SAUR67. In conclusion, NO2 inhibits the binding of PIF4 to the promoter regions of genes involved in the auxin pathway to suppress hypocotyl elongation in Arabidopsis. Consequently, PIF4 emerges as a pivotal participant in this regulatory process. This study has further clarified the intricate regulatory mechanisms governing plant responses to environmental pollutants, thereby advancing our understanding of how plants adapt to changing atmospheric conditions.

Self-assembled peptide nanotubes (SPNTs)/SnO2nanocomposites for high-performance NO2sensing at room temperature.

Nitrogen dioxide (NO2) is a major pollutant that poses significant risks to sustainable human life. As a result, a growing focus has been placed on the development of highly selective and sensitive gas sensors for NO2. Traditional cutting-edge non-organic NO2gas detectors often necessitate stringent production conditions and potentially harmful materials, which are not environmentally friendly, and these shortcomings have limited their widespread practical use. To overcome these challenges, we synthesized self-assembled peptide nanotubes (SPNTs) through a molecular self-assembly process. The SPNTs were then combined with SnO2in varying proportions to construct NO2gas sensors. The design of this sensor ensured efficient electron transfer and leverage the extensive surface area of the SPNTs for enhanced gas adsorption and the effective dispersion of SnO2nanoparticles. Notably, the performance of the sensor, including its sensitivity, response time, and recovery rate, along with a lower detection threshold, could be finely tuned by varying the SPNTs content. This approach illustrated the potential of bioinspired methodologies, using peptide self-assemblies, to develop integrated sensors for pollutant detection, providing a significant development in environmentally conscious sensor technology.

Preparation of SnS2/MoS2with p-n heterojunction for NO2sensing.

Conventional metal sulfide (SnS2) gas-sensitive sensing materials still have insufficient surface area and slow response/recovery times. To increase its gas-sensing performance, MoS2nanoflower was produced hydrothermally and mechanically combined with SnS2nanoplate. Extensive characterization results show that MoS2was effectively integrated into SnS2. Four different concentrations of SnS2-MoS2composites were evaluated for their NO2gas sensitization capabilities. Among them, SnS2-15% MoS2at 170 °C demonstrated the greatest response values to NO2, 7.3 for 1 ppm NO2, which is about three times greater than the SnS2sensor at 170 °C (2.58). The creation of pn junctions following compositing with SnS2was determined to be the primary reason for the composite's faster recovery time, while the heterojunction allowed for the rapid separation of hole-electron pairs. Because the MoS2surface has multiple vacancy defects, the adsorption energy of these vacancies is significantly higher than that of other places, resulting in increased NO2adsorption. Furthermore, MoS2can serve as active adsorption sites for SnS2micrometer sheets during gas sensing. This study may help to build new NO2gas sensors.

Atomically thin-layered WS2based resistive sensors for detection of CO and NO2at room temperature.

The number of layers present in a two-dimensional (2D) nanomaterial plays a critical role in applications that involve surface interaction, for example, gas sensing. This paper reports the synthesis of 2D WS2nanoflakes using the facile liquid exfoliation technique. The nanoflakes were exfoliated using bath sonication (BS-WS2) and probe sonication (PS-WS2). The thickness of the BS-WS2was found to range between 70 and 200 nm, and that of PS-WS2varied from 0.6 to 80 nm, indicating the presence of single to few layers of WS2when characterized using atomic force microscope. All the WS2samples were thoroughly characterized using electron microscopes, x-ray diffractometer, Raman spectroscopy, UV-Visible spectroscopy, Fourier transform infrared spectroscope, and thermogravimetric analyser. Both the nanostructured samples were exposed to 2 ppm of NO2at room temperature. Interestingly, BS-WS2which comprises of a greater number of WS2layers exhibited -14.2% response as against -3.4% response of PS-WS2, the atomically thin sample. The BS-WS2sample was found to be highly selective towards NO2but was slower (with incomplete recovery) as compared to PS-WS2. The PS-WS2sample was observed to exhibit -11.9% to -27.4% response to 2-10 ppm of CO and -3.4%-35.2% response to 2-10 ppm of NO2at room temperature, thereby exhibiting the potential to detect two gases simultaneously. These gases could be accurately predicted and quantified if the response times of the PS-WS2sample were considered. The atomically thin WS2-based sensor exhibited a limit of detection of 131 and 81 ppb for CO and NO2, respectively.

Associations between air pollutants and acute exacerbation of drug-resistant tuberculosis: evidence from a prospective cohort study.

BACKGROUND: Short-term exposure to air pollution may trigger symptoms of drug-resistant tuberculosis (DR-TB) through stimulating lung tissue, damaging tracheobronchial mucosa, the key anti-mycobacterium T cell immune function, and production and release of inflammatory cytokines. OBJECTIVE: To investigate the association between acute exacerbations of DR-TB and short-term residential exposure to air pollutants (PM10, PM2.5, SO2, NO2, CO and O3) based on a large prospective cohort in Anhui Province, China. METHOD: Patients were derived from a prospective cohort study of DR-TB in Anhui Province. All DR-TB patients underwent drug-susceptibility testing and prefecture-level reference laboratories confirmed their microbiologies. The case-crossover design was performed to evaluate the association between the risk of acute exacerbations of DR-TB and short-term residential exposure to air pollution. RESULTS: Short-term NO2 exposure was significantly related to an elevated risk of first-time outpatient visit due to acute exacerbations of DR-TB(relative risk:1.159, 95% confidence interval:1.011 ~ 1.329). Stratification analyses revealed that the relationship between the risk of acute exacerbations and NO2 exposure was stronger in the elderly (age ≥ 65) DR-TB patients, and in individuals with a history of TB treatment. CONCLUSIONS: NO2 Exposure was significantly associated with an elevated risk of acute exacerbation of DR-TB in Anhui Province, China.

Rapid hydrolysis of NO2 at High Ionic Strengths of Deliquesced Aerosol Particles.

Nitrogen dioxide (NO2) hydrolysis in deliquesced aerosol particles forms nitrous acid and nitrate and thus impacts air quality, climate, and the nitrogen cycle. Traditionally, it is considered to proceed far too slowly in the atmosphere. However, the significance of this process is highly uncertain because kinetic studies have only been made in dilute aqueous solutions but not under high ionic strength conditions of the aerosol particles. Here, we use laboratory experiments, air quality models, and field measurements to examine the effect of the ionic strength on the reaction kinetics of NO2 hydrolysis. We find that high ionic strengths (I) enhance the reaction rate constants (kI) by more than an order of magnitude compared to that at infinite dilution (kI=0), yielding log10(kI/kI=0) = 0.04I or rate enhancement factor = 100.04I. A state-of-the-art air quality model shows that the enhanced NO2 hydrolysis reduces the negative bias in the simulated concentrations of nitrous acid by 28% on average when compared to field observations over the North China Plain. Rapid NO2 hydrolysis also enhances the levels of nitrous acid in other polluted regions such as North India and further promotes atmospheric oxidation capacity. This study highlights the need to evaluate various reaction kinetics of atmospheric aerosols with high ionic strengths.

Prenatal and Early Life Exposure to Ambient Air Pollutants Is Associated with the Fecal Metabolome in the First Two Years of Life.

Prenatal and early life air pollution exposure has been linked with several adverse health outcomes. However, the mechanisms underlying these relationships are not yet fully understood. Therefore, this study utilizes fecal metabolomics to determine if pre- and postnatal exposure to ambient air pollutants (i.e., PM10, PM2.5, and NO2) is associated with the fecal metabolome in the first 2 years of life in a Latino cohort from Southern California. The aims of this analysis were to estimate associations between (1) prenatal air pollution exposure with fecal metabolic features at 1-month of age, (2) prior month postnatal air pollution exposure with fecal metabolites from 1-month to 2 years of age, and (3) how postnatal air pollution exposure impacts the change over time of fecal metabolites in the first 2 years of life. Prenatal exposure to air pollutants was associated with several Level-1 metabolites, including those involved in vitamin B6 and tyrosine metabolism. Prior month air pollution exposure in the postnatal period was associated with Level-1 metabolites involved in histidine metabolism. Lastly, we found that pre- and postnatal ambient air pollution exposure was associated with changes in metabolic features involved in metabolic pathways including amino acid metabolism, histidine metabolism, and fatty acid metabolism.

Exposure to Low-Level Air Pollution and Hyperglycemia Markers during Pregnancy: A Repeated Measure Analysis.

Epidemiologic evidence has emerged showing an association between exposure to air pollution and increased risks of gestational diabetes mellitus (GDM). This study examines the effect of low-level air pollution exposure on a subclinical biomarker of hyperglycemia (i.e., HbA1c) in pregnant people without diabetes before conception. We measured HbA1c in 577 samples repeatedly collected from 224 pregnant people in Rochester, NY, and estimated residential concentrations of PM2.5 and NO2 using high-resolution spatiotemporal models. We observed a U-shaped trajectory of HbA1c during pregnancy with average HbA1c levels of 5.13 (±0.52), 4.97 (±0.54), and 5.43 (±0.40)% in early-, mid-, and late pregnancy, respectively. After adjustment for the U-shaped trajectory and classic GDM risk factors, each interquartile range increase in 10 week NO2 concentration (8.0 ppb) was associated with 0.09% (95% CI: 0.02 to 0.16%) and 0.18% (95% CI: 0.08 to 0.28%) increases in HbA1c over the entire pregnancy and in late pregnancy, respectively. These associations remained robust among participants without GDM. Using separate distributed lag models, we identified a period between 8th and 14th gestational weeks as critical windows responsible for increased levels of HbA1c measured at 14th, 22nd, and 30th gestational weeks. Our results suggest that low-level air pollution contributes to hyperglycemia in medically low-risk pregnant people.

Satellite NO2 Retrieval Complicated by Aerosol Composition over Global Urban Agglomerations: Seasonal Variations and Long-Term Trends (2001-2018).

Tropospheric nitrogen dioxide (NO2) poses a serious threat to the environmental quality and public health. Satellite NO2 observations have been continuously used to monitor NO2 variations and improve model performances. However, the accuracy of satellite NO2 retrieval depends on the knowledge of aerosol optical properties, in particular for urban agglomerations accompanied by significant changes in aerosol characteristics. In this study, we investigate the impacts of aerosol composition on tropospheric NO2 retrieval for an 18 year global data set from Global Ozone Monitoring Experiment (GOME)-series satellite sensors. With a focus on cloud-free scenes dominated by the presence of aerosols, individual aerosol composition affects the uncertainties of tropospheric NO2 columns through impacts on the aerosol loading amount, relative vertical distribution of aerosol and NO2, aerosol absorption properties, and surface albedo determination. Among aerosol compositions, secondary inorganic aerosol mostly dominates the NO2 uncertainty by up to 43.5% in urban agglomerations, while organic aerosols contribute significantly to the NO2 uncertainty by -8.9 to 37.3% during biomass burning seasons. The possible contrary influences from different aerosol species highlight the importance and complexity of aerosol correction on tropospheric NO2 retrieval and indicate the need for a full picture of aerosol properties. This is of particular importance for interpreting seasonal variations or long-term trends of tropospheric NO2 columns as well as for mitigating ozone and fine particulate matter pollution.

Vertical Evolution of Ozone Formation Sensitivity Based on Synchronous Vertical Observations of Ozone and Proxies for Its Precursors: Implications for Ozone Pollution Prevention Strategies.

Photochemical ozone (O3) formation in the atmospheric boundary layer occurs at both the surface and elevated altitudes. Therefore, the O3 formation sensitivity is needed to be evaluated at different altitudes before formulating an effective O3 pollution prevention and control strategy. Herein, we explore the vertical evolution of O3 formation sensitivity via synchronous observations of the vertical profiles of O3 and proxies for its precursors, formaldehyde (HCHO) and nitrogen dioxide (NO2), using multi-axis differential optical absorption spectroscopy (MAX-DOAS) in urban areas of the Beijing-Tianjin-Hebei (BTH), Yangtze River Delta (YRD), and Pearl River Delta (PRD) regions in China. The sensitivity thresholds indicated by the HCHO/NO2 ratio (FNR) varied with altitude. The VOC-limited regime dominated at the ground level, whereas the contribution of the NOx-limited regime increased with altitude, particularly on heavily polluted days. The NOx-limited and transition regimes played more important roles throughout the entire boundary layer than at the surface. The feasibility of extreme NOx reduction to mitigate the extent of the O3 pollution was evaluated using the FNR-O3 curve. Based on the surface sensitivity, the critical NOx reduction percentage for the transition from a VOC-limited to a NOx-limited regime is 45-72%, which will decrease to 27-61% when vertical evolution is considered. With the combined effects of clean air action and carbon neutrality, O3 pollution in the YRD and PRD regions will transition to the NOx-limited regime before 2030 and be mitigated with further NOx reduction.

Assessment of the association between ambient air pollution and stillbirth in the UK: Results from a secondary analysis of the MiNESS case-control study.

OBJECTIVE: We examined whether the risk of stillbirth was related to ambient air pollution in a UK population. DESIGN: Prospective case-control study. SETTING: Forty-one maternity units in the UK. POPULATION: Women who had a stillbirth ≥28 weeks' gestation (n = 238) and women with an ongoing pregnancy at the time of interview (n = 597). METHODS: Secondary analysis of data from the Midlands and North of England Stillbirth case-control study only including participants domiciled within 20 km of fixed air pollution monitoring stations. Pollution exposure was calculated using pollution climate modelling data for NO2 , NOx and PM2.5 . The association between air pollution exposure and stillbirth risk was assessed using multivariable logistic regression adjusting for household income, maternal body mass index (BMI), maternal smoking, Index of Multiple Deprivation quintile and household smoking and parity. MAIN OUTCOME MEASURE: Stillbirth. RESULTS: There was no association with whole pregnancy ambient air pollution exposure and stillbirth risk, but there was an association with preconceptual NO2 exposure (adjusted odds ratio [aOR] 1.06, 95% CI 1.01-1.08 per microg/m3 ). Risk of stillbirth was associated with maternal smoking (aOR 2.54, 95% CI 1.38-4.71), nulliparity (aOR 2.16, 95% CI 1.55-3.00), maternal BMI (aOR 1.05, 95% CI 1.01-1.08) and placental abnormalities (aOR 4.07, 95% CI 2.57-6.43). CONCLUSIONS: Levels of ambient air pollution exposure during pregnancy in the UK, all of were beneath recommended thresholds, are not associated with an increased risk of stillbirth. Periconceptual exposure to NO2 may be associated with increased risk but further work is required to investigate this association.

Effects of long-term exposure to outdoor air pollution on COVID-19 incidence: A population-based cohort study accounting for SARS-CoV-2 exposure levels in the Netherlands.

Several studies have linked air pollution to COVID-19 morbidity and severity. However, these studies do not account for exposure levels to SARS-CoV-2, nor for different sources of air pollution. We analyzed individual-level data for 8.3 million adults in the Netherlands to assess associations between long-term exposure to ambient air pollution and SARS-CoV-2 infection (i.e., positive test) and COVID-19 hospitalisation risks, accounting for spatiotemporal variation in SARS-CoV-2 exposure levels during the first two major epidemic waves (February 2020-February 2021). We estimated average annual concentrations of PM10, PM2.5 and NO2 at residential addresses, overall and by PM source (road traffic, industry, livestock, other agricultural sources, foreign sources, other Dutch sources), at 1 × 1 km resolution, and weekly SARS-CoV-2 exposure at municipal level. Using generalized additive models, we performed interval-censored survival analyses to assess associations between individuals' average exposure to PM10, PM2.5 and NO2 in the three years before the pandemic (2017-2019) and COVID-19-outcomes, adjusting for SARS-CoV-2 exposure, individual and area-specific confounders. In single-pollutant models, per interquartile (IQR) increase in exposure, PM10 was associated with 7% increased infection risk and 16% increased hospitalisation risk, PM2.5 with 8% increased infection risk and 18% increased hospitalisation risk, and NO2 with 3% increased infection risk and 11% increased hospitalisation risk. Bi-pollutant models suggested that effects were mainly driven by PM. Associations for PM were confirmed when stratifying by urbanization degree, epidemic wave and testing policy. All emission sources of PM, except industry, showed adverse effects on both outcomes. Livestock showed the most detrimental effects per unit exposure, whereas road traffic affected severity (hospitalisation) more than infection risk. This study shows that long-term exposure to air pollution increases both SARS-CoV-2 infection and COVID-19 hospitalisation risks, even after controlling for SARS-CoV-2 exposure levels, and that PM may have differential effects on these COVID-19 outcomes depending on the emission source.

A unified framework for assessing interaction effects among environmental exposures in epidemiologic studies: A case study on temperature, air pollution, and kidney-related conditions in New York state.

BACKGROUND: There are various methods to assess interaction effects. However, current methods have limitations, and quantification of interaction effects is rarely performed. This study aimed to develop a unified quantitative framework for assessing interaction effects. METHODS: We proposed a novel framework using log-linear models with a product term(s) across the exposures that generates parametric bi-variate association and interaction effect surfaces and allows flexible functional forms for exposures in the interaction term(s). In a case study, we assessed the interaction effects between temperature and air pollution (i.e., PM2.5, NO2, and O3) on risk for kidney-related conditions in New York State (2007-2016) using a case-crossover design with conditional logistic models. Our measures of exposure were the moving averages at lag 0-5 days for air pollution (linear) and daytime mean outdoor wet-bulb globe temperature (WBGT; using a natural cubic spline). RESULTS: We derived closed-form expressions for the magnitude of multiplicative interaction effects (the joint relative risk divided by the product of the two conditional relative risks) and their uncertainties. In the case study, we found a Bonferroni-corrected significant multiplicative interaction effect (IE) between outdoor WBGT at the 99th percentile (median as the reference) and (1) PM2.5 (per 5 µg/m3 increase, IE = 1.052; 95 % confidence interval [CI]: 1.019, 1.087) for acute kidney failure and (2) O3 (per 5 ppb increase; IE = 1.022; 95 % CI: 1.008, 1.036) for urolithiasis (the latter being inconclusive based on the sensitivity analysis). CONCLUSIONS: Our framework allows different functional forms of exposure variables in the interaction term, quantifies the magnitudes of entire-exposure-range (in addition to discrete exposure level) multiplicative interaction effects and their uncertainties in a categorical or continuous (linear or non-linear) manner, and harmonizes the two-way evaluation of effect modification. The case study underscores co-consideration of heat and air pollution when estimating health burden and designing heat/pollution alert systems.

Do Machine Learning Methods Improve Prediction of Ambient Air Pollutants with High Spatial Contrast? A Systematic Review.

BACKGROUND & OBJECTIVE: The use of machine learning for air pollution modelling is rapidly increasing. We conducted a systematic review of studies comparing statistical and machine learning models predicting the spatiotemporal variation of ambient nitrogen dioxide (NO2), ultrafine particles (UFPs) and black carbon (BC) to determine whether and in which scenarios machine learning generates more accurate predictions. METHODS: Web of Science and Scopus were searched up to June 13, 2024. All records were screened by two independent reviewers. Differences in the coefficient of determination (R2) and Root Mean Square Error (RMSE) between best statistical and machine learning methods were compared across categories of methodological elements. RESULTS: A total of 38 studies with 46 model comparisons (30 for NO2, 8 for UFPs and 8 for BC) were included. Linear non-regularized methods and Random Forest were most frequently used. Machine learning outperformed statistical models in 34 comparisons. Mean differences (95% confidence intervals) in R2 and RMSE between best machine learning and statistical models were 0.12 (0.08, 0.17) and 20% (11%, 29%) respectively. Tree-based methods performed best in 12 of 17 multi-model comparisons. Nonlinear or regularization regression methods were used in only 12 comparisons and provided similar performance to machine learning methods. CONCLUSION: This systematic review suggests that machine learning methods, especially tree-based methods, may be superior to linear non-regularized methods for predicting ambient concentrations of NO2, UFPs and BC. Additional comparison studies using nonlinear, regularized and a wider array of machine learning methods are needed to confirm their relative performance. Future air pollution studies would also benefit from more explicit and standardized reporting of methodologies and results.

Capabilities of satellite Geostationary Environment Monitoring Spectrometer (GEMS) NO2 data for hourly ambient NO2 exposure modeling.

The Geostationary Environment Monitoring Spectrometer (GEMS) is the world's first geostationary instrument that monitors hourly gaseous air pollutant levels, including nitrogen dioxide (NO2). Using the first-of-its-kind capabilities of GEMS NO2 data, we examined how well GEMS NO2 levels can explain the spatiotemporal variabilities in hourly NO2 concentrations in the Republic of Korea for the year 2022. A correlation analysis between hourly GEMS NO2 levels and ground NO2 concentrations showed a higher spatial correlation [Pearson r = 0.56 (SD = 0.20)] than a temporal one [Pearson r = 0.42 (SD = 0.14)], on average. To take advantage of the enhanced spatial predictability of GEMS NO2 data, we employed a mixed effects model to allow hour-specific relationships between GEMS NO2 and NO2 concentrations on a given day in each region and subsequently estimated hourly NO2 concentrations in all urban and rural areas. The 10-fold cross validation demonstrated R2 = 0.72, mean absolute error (MAE) = 3.7 ppb, and root mean squared error (RMSE) = 5.5 ppb. The hourly variations of the relationships were attributed particularly to those of wind speed among meteorological parameters considered in this study. The spatial distributions of hourly estimated NO2 concentrations were highly correlated between hours [average r = 0.91 (SD = 0.06)]. Nonetheless, they represented the diurnal patterns of urban versus rural NO2 contrasts during the day [urban/rural NO2 ratios from 1.22 (5 p.m.) to 1.37 (12 p.m.)]. The newly retrieved GEMS NO2 data enable temporally as well as spatially resolved NO2 exposure assessment. In combination with the time-activity patterns of individual subjects, the GEMS NO2 data can generate 'sub-population' exposure estimates and therefore enhance health effect studies.

From port to planet: Assessing NO2 pollution and climate change effects with Sentinel-5p satellite imagery in maritime zones.

The growing effects of climate change on Malaysia's coastal ecology heighten worries about air pollution, specifically caused by urbanization and industrial activity in the maritime sector. Trucks and vessels are particularly noteworthy for their substantial contribution to gas emissions, including nitrogen dioxide (NO2), which is the primary gas released in port areas. The application of advanced analysis techniques was spurred by the air pollution resulting from the combustion of fossil fuels such as fuel oil, natural gas and gasoline in vessels. The study utilized satellite photos captured by the Tropospheric Monitoring Instrument (TROPOMI) on the Sentinel-5P satellite to evaluate the levels of NO2 gas pollution in Malaysia's port areas and exclusive economic zone. Before the COVID-19 pandemic, unrestricted gas emissions led to persistently high levels of NO2 in the analyzed areas. The temporary cessation of marine industry operations caused by the pandemic, along with the halting of vessels to prevent the spread of COVID-19, resulted in a noticeable decrease in NO2 gas pollution. In light of these favourable advancements, it is imperative to emphasize the need for continuous investigation and collaborative endeavours to further alleviate air contamination in Malaysian port regions, while simultaneously acknowledging the wider consequences of climate change on the coastal ecology. The study underscores the interdependence of air pollution, maritime activities and climate change. It emphasizes the need for comprehensive strategies that tackle both immediate environmental issues and the long-term sustainability and resilience of coastal ecosystems in the context of global climate challenges.