In vivo photocontrol of orexin receptors with a nanomolar light-regulated analogue of orexin-B.

Orexinergic neurons are critically involved in regulating arousal, wakefulness, and appetite. Their dysfunction has been associated with sleeping disorders, and non-peptide drugs are currently being developed to treat insomnia and narcolepsy. Yet, no light-regulated agents are available to reversibly control their activity. To meet this need, a photoswitchable peptide analogue of the endogenous neuroexcitatory peptide orexin-B was designed, synthesized, and tested in vitro and in vivo. This compound - photorexin - is the first photo-reversible ligand reported for orexin receptors. It allows dynamic control of activity in vitro (including almost the same efficacy as orexin-B, high nanomolar potency, and subtype selectivity to human OX2 receptors) and in vivo in zebrafish larvae by direct application in water. Photorexin induces dose- and light-dependent changes in locomotion and a reduction in the successive induction reflex that is associated with sleep behavior. Molecular dynamics calculations indicate that trans and cis photorexin adopt similar bent conformations and that the only discriminant between their structures and activities is the positioning of the N-terminus. This, in the case of the more active trans isomer, points towards the OX2 N-terminus and extra-cellular loop 2, a region of the receptor known to be involved in ligand binding and recognition consistent with a "message-address" system. Thus, our approach could be extended to several important families of endogenous peptides, such as endothelins, nociceptin, and dynorphins among others, that bind to their cognate receptors through a similar mechanism: a "message" domain involved in receptor activation and signal transduction, and an "address" sequence for receptor occupation and improved binding affinity.

Photopharmacological modulation of native CRAC channels using azoboronate photoswitches.

SignificanceCalcium release-activated calcium (CRAC) channels play key roles in the regulation of cellular signaling, transcription, and migration. Here, we describe the design, chemical synthesis, and characterization of photoswitchable channel inhibitors that can be switched on and off depending on the wavelength of light used. We use the compounds to induce light-dependent modulation of channel activity and downstream gene expression in human immune cells. We further expand the usage of the compounds to control seeding of cancer cells in target tissue and regulation of response to noxious stimuli in vivo in mice.

Guard Cell-Inspired Ion Channels: Harnessing the Photomechanical Effect via Supramolecular Assembly of Cross-Linked Azobenzene/Polymers.

Stimuli-responsive ion nanochannels have attracted considerable attention in various fields because of their remote controllability of ionic transportation. For photoresponsive ion nanochannels, however, achieving precise regulation of ion conductivity is still challenging, primarily due to the difficulty of programmable structural changes in confined environments. Moreover, the relationship between noncontact photo-stimulation in nanoscale and light-induced ion conductivity has not been well understood. In this work, a versatile design for fabricating guard cell-inspired photoswitchable ion channels is presented by infiltrating azobenzene-cross-linked polymer (AAZO-PDAC) into nanoporous anodic aluminum oxide (AAO) membranes. The azobenzene-cross-linked polymer is formed by azobenzene chromophore (AAZO)-cross-linked poly(diallyldimethylammonium chloride) (PDAC) with electrostatic interactions. Under UV irradiation, the trans-AAZO isomerizes to the cis-AAZO, causing the volume compression of the polymer network, whereas, in darkness, the cis-AAZO reverts to the trans-AAZO, leading to the recovery of the structure. Consequently, the resultant nanopore sizes can be manipulated by the photomechanical effect of the AAZO-PDAC polymers. By adding ionic liquids, the ion conductivity of the light-driven ion nanochannels can be controlled with good repeatability and fast responses (within seconds) in multiple cycles. The ion channels have promising potential in the applications of biomimetic materials, sensors, and biomedical sciences.

Versatile and Remotely Controllable Light-Induced Coagulation of Particles Under Flow in a 2D Channel.

On-demand switch on/off blood clogging is of paramount importance for the survival of mammals, for example as a quick response to seal damage wounds to minimize their bleeding rate. This mechanism is a complex chain process from initiated red blood cell aggregation at the target location (open wound) that quickly seals on a macroscopic scale the damaged flash. Inspired by nature an on-demand switchable particle clogging mechanism is developed with high spatial resolution down to micrometer size using light as an external non-invasive stimulation. Particle clogging can be adjusted on demand strong enough to even withstand pressure-driven fluid flow, additionally building up walls of aggregated particles, which stop the momentum of big particles under shear. The principle relies on a photosensitive surfactant, which induces under light illumination a long-ranged lateral attractive phoretic-osmotic activity of silica microparticles forcing them to aggregate. The strength of aggregation and therefore motion reduction or even stop of the particles against the fluid flow depends on the ratio between the aggregation strength and the velocity of the particles. The aggregation strength can be precisely controlled by the applied light intensity and adjusted particle concentration. Increasing both parameters results in a stronger aggregation tendency.

Red Fluorescence from Organic Microdots: Leveraging Foldamer-Linked Azobenzene for Enhanced Stability and Intensity in Bioimaging Applications.

Azobenzene, while relevant, has faced constraints in biological system applications due to its suboptimal quantum yield and short-wavelength emission. This study presents a pioneering strategy for fabricating organic microdots by coupling foldamer-linked azobenzene, resulting in robust fluorescence intensity and stability, especially in aggregated states, thereby showing promise for bioimaging applications. Comprehensive experimental and computational examinations elucidate the mechanisms underpinning enhanced photostability and fluorescence efficacy. In vitro and in vivo evaluations disclose that the external layer of cis-azo-foldamer microdots performs a self-sacrificial function during photo-bleaching. Consequently, these red-fluorescent microdots demonstrate extraordinary structural and photochemical stabilities over extended periods. The conjugation of a ß-peptide foldamer to the azobenzene chromophore through a glycine linker instigates a blue-shifted and amplified π*-n transition. Molecular dynamics simulations reveal that the aggregated state of cis-azo-foldamers fortifies the stability of cis isomers, thereby augmenting fluorescence efficiency. This investigation furnishes crucial insights into conceptualizing novel, biologically inspired materials, promising stable and enduring imaging applications, and carries implications for diverse arenas such as medical diagnostics, drug delivery, and sensing technologies.

Photomechaelectric Nanogenerators with Different Photoisomers and Dipole Units for Harvesting UV Light Energy.

To date, transforming environmental energy into electricity through a non-mechanical way is challenging. Herein, a series of photomechaelectric (PME) polyurethanes containing azobenzene-based photoisomer units and ionic liquid-based dipole units are synthesized, and corresponding PME nanogenerators (PME-NGs) to harvest electricity are fabricated. The dependence of the output performance of PME-NGs on the structure of the polyurethane is evaluated. The results show that the UV light energy can directly transduce into alternating-current (AC) electricity by PME-NGs via a non-mechanical way. The optimal open-circuit voltage and short-circuit current of PME-NGs under UV illumination reach 17.4 V and 696 µA, respectively. After rectification, the AC electricity can be further transformed into direct-current (DC) electricity and stored in a capacitor to serve as a power system to actuate typical microelectronics. The output performance of PME-NGs is closely related to the hard segment content of the PME polyurethane and the radius of counter anions in the dipole units. Kelvin probe force microscopy is used to confirm the existence of the PME effect and the detailed mechanism about the generation of AC electricity in PME-NGs is proposed, referring to the back and forth drift of induced electrons on the two electrodes in contact with the PME polyurethanes.

Enhanced Photodynamic Therapy for Neurodegenerative Diseases: Development of Azobenzene-Spiropyran@Gold Nanoparticles for Controlled Singlet Oxygen Generation.

The development of durable photosensitizers is pivotal for advancing phototherapeutic applications in biomedicine. Here, we introduce a core-shell azobenzene-spiropyran structure on gold nanoparticles, engineered to enhance singlet oxygen generation. These nano-photosensitizers exhibit increased structural stability and thermal resistance, as demonstrated by slowed O-N-C bond recombination dynamics via in-situ Raman spectroscopy. Notably, the in-situ formation of merocyanine and a light-induced compact shell arrangement extend its half-life from 47 minutes to over 154 hours, significantly boosting singlet oxygen output. The nano-photosensitizer also shows high biocompatibility and notably inhibits tau protein aggregation in neural cells, even with phosphatase inhibitors. Further, it promotes dendritic growth in neuro cells, doubling typical lengths. This work not only advances chemical nanotechnology but also sets a foundation for developing long-lasting phototherapy agents for treating neurodegenerative diseases.

Geometry-Induced Oligomerization of Fluorine-Substituted Phenylazothiazole Photoswitches.

Photoswitches are molecules that can absorb light of specific wavelengths and undergo a reversible transformation between their trans and cis isomeric forms. In phenylazo photoswitches, it is common for the less stable cis (Z) isomer to convert back to the more stable trans (E) isomer either through photochemical or thermal means. In this research, we designed new derivatives of phenylazothiazole (PAT) photoswitches, PAT-Fn, which feature fluorine substituents on their phenyl component. These derivatives can reversibly isomerize under visible light exposure with the enrichment of E and Z isomers at photostationary state (PSS). Surprisingly, we observed an unconventional phenomenon when these PAT-Fn (n≧2) photoswitches were in their cis isomeric state in the absence of light. Instead of the anticipated transformation from cis to trans isomer, these compounds converted to an oligomeric compound. Our detailed experimental investigation and theoretical calculations, indicated the crucial role of fluorine substituents and the distinctive geometric arrangement of the cis isomer in driving the unexpected oligomerization process originating from the cis isomeric state.

Cyclic Azobenzene-BODIPY Hybrids.

Cyclic azobenzene-BODIPY hybrids were synthesized via cyclization by 1) acid-catalysed condensation of azobenzene-bridged dipyrroles with 3,5-di-tert-butylbenzaldehyde, 2) oxidation with DDQ, and 3) metalation with BF3 ⋅ Et2 O. The structures of many cyclic hybrids have been confirmed by single crystal X-ray analysis. The absorption spectra of the hybrids reveal the effective cyclic conjugation. The ultrafast measurements reveal that the photoexcited decays of these cyclic hybrids depend upon the ring size and connectivity.

Tuning the Thermal Stability of Tetra-o-chloroazobenzene Derivatives by Transforming Push-Pull to Push-Push Systems.

Molecular photoswitches provide interesting tools to reversibly control various biological functions with light. Thanks to its small size and easy introduction into the biomolecules, azobenzene derivatives have been widely employed in the field of photopharmacology. All visible-light switchable azobenzenes with controllable thermostability are highly demanded. Based on the reported tetra-o-chloroazobenzenes, we synthesized push-pull systems, by introducing dialkyl amine and nitro groups as strong electron-donating and electron-withdrawing groups on the para-positions, and then transformed to push-push systems by a simple reduction step. The developed push-pull and push-push tetra-o-chloroazobenzene derivatives displayed excellent photoswitching properties, as previously reported. The half-life of the Z-isomers can be tuned from milliseconds for the push-pull system to several hours for the push-push system. The n-π* and π-π* transitions have better resolution in the push-push molecules, and excitation at different wavelengths can tune the E/Z ratio at the photostationary state. For one push-pull molecule, structure and absorption spectra obtained from theoretical calculations are compared with experimental data, along with data on the push-push counterpart.

Transient Photoactivation of Anionophores by Using Redshifted Fast-Relaxing Azobenzenes.

Photo-regulated transmembrane ionophores enable spatial and temporal control over activity, offering promise as targeted therapeutics. Key to such applications is control using bio-compatible visible light. Herein, we report red-shifted azobenzene-derived synthetic anionophores that use amber or red light to trigger (E)-(Z) photoisomerisation and activation of transmembrane chloride transport. We demonstrate that by tuning the thermal half-life of the more active, but thermodynamically unstable, Z isomer to relax on the timescale of minutes, transient activation of ion transport can be achieved by activating with solely with visible light and deactivating by thermal relaxation.

"Photo-Adrenalines": Photoswitchable ß2 -Adrenergic Receptor Agonists as Molecular Probes for the Study of Spatiotemporal Adrenergic Signaling.

ß2 -adrenergic receptor (ß2 -AR) agonists are used for the treatment of asthma and chronic obstructive pulmonary disease, but also play a role in other complex disorders including cancer, diabetes and heart diseases. As the cellular and molecular mechanisms in various cells and tissues of the ß2 -AR remain vastly elusive, we developed tools for this investigation with high temporal and spatial resolution. Several photoswitchable ß2 -AR agonists with nanomolar activity were synthesized. The most potent agonist for ß2 -AR with reasonable switching is a one-digit nanomolar active, trans-on arylazopyrazole-based adrenaline derivative and comprises valuable photopharmacological properties for further biological studies with high structural accordance to the native ligand adrenaline.

Advancing Optoglycomics: Two Orthogonal Azobenzene Glycoside Antennas in One Glycocluster - Synthesis, Switching Cycles, Kinetics and Molecular Dynamics.

Carbohydrate recognition is essential for numerous biological processes and is governed by various factors within the supramolecular environment of the cell. Photoswitchable glycoconjugates have proven as valuable tools for the investigation and modulation of carbohydrate recognition as they allow to control the relative orientation of sugar ligands by light. We have synthesized a biantennary glycocluster in which two glycoazobenzene antennas are conjugated to the 3- and 6-position of a scaffold glycoside. Orthogonal isomerization of the photoswitchable units was made possible by the different conjugation of the azobenzene moieties via an oxygen and a sulfur atom, respectively, and the ortho-fluorination of one of the azobenzene units. This design enabled a switching cycle comprising the EE, EZ and the ZZ isomer. This is the first example of an orthogonally photoswitchable glycocluster. The full analysis of its photochromic properties included the investigation of the isolated glycoazobenzene antennas allowing the comparison of the intra- versus the intermolecular orthogonal photoswitching. The kinetics of the thermal relaxation were analyzed in detail. A molecular dynamics study shows that indeed, the relative orientation of the glycoantennas and the distances between the terminal sugar ligands significantly vary depending on the isomeric state, as intended.

Solvent Geometry Regulated J- and H-Type Aggregates of Photoswitchable Organogelator: Phase-Selective Thixotropic Gelation and Oil Spill Recovery.

We demonstrate supramolecular polymerization and formation of 1D nanofiber of azobenzene based organogelator (AZO-4) in cyclic hydrocarbon solvents (toluene and methylcyclohexane). The AZO-4 exhibits J- and H-type aggregates in toluene: MCH (9 : 1) and MCH: toluene (9 : 1) respectively. The type of aggregate was governed by the geometry of the solvents used in the self-assembly process. The J-type aggregates with high thermal stability in toluene is due to the enhanced interaction of AZO-4 π- surface with the toluene π-surface, whereas H-aggregate with moderate thermal stability in MCH was due to the interruption of the cyclic hydrocarbon in van der Waals interactions of peripheral chains of AZO-4 molecule. The light induced reversible photoisomerization is observed for both J- and H-aggregates. The macroscopic property revealed spontaneous and strong gelation in toluene preferably due to the strong interactions of the AZO-4 nanofibers with the toluene solvent molecules compared to the MCH. The rheological measurements revealed thixotropic nature of the gels by step-strain experiments at room temperature. The thermodynamic parameter (ΔHm) of gel-to-sol transition was determined for all the gels to get more insight into the gelation property. Furthermore, the phase selective gelation property was extended to the oil spill recovery application using diesel/water and petrol/water mixture.

A Photoswitchable Metallocycle Based on Azobenzene: Synthesis, Characterization, and Ultrafast Dynamics.

The novel photoswitchable ligand 3,3'-Azobenz(metPA)2 (1) is used to prepare a [Cu2(1)2](BF4)2 metallocycle (2), whose photoisomerization was characterized using static and time-resolved spectroscopic methods. Optical studies demonstrate the highly quantitative and reproducible photoinduced cyclic E/Z switching without decay of the complex. Accordingly and best to our knowledge, [Cu2(1)2](BF4)2 constitutes the first reversibly photoswitchable (3d)-metallocycle based on azobenzene. The photoinduced multiexponential dynamics in the sub-picosecond to few picosecond time domain of 1 and 2 have been assessed. These ultrafast dynamics as well as the yield of the respective photostationary state (PSSZ = 65 %) resemble the behavior of archetypical azobenzene. Also, the innovative pump-probe laser technique of gas phase transient photodissociation (τ-PD) in a mass spectrometric ion trap was used to determine the intrinsic relaxation dynamics for the isolated complex. These results are consistent with the results from femtosecond UV/Vis transient absorption (fs-TA) in solution, emphasizing the azobenzene-like dynamics of 2. This unique combination of fs-TA and τ-PD enables valuable insights into the prevailing interplay of dynamics and solvation. Both analyses (in solution and gas phase) and quantum chemical calculations reveal a negligible effect of the metal coordination on the switching mechanism and electronic pathway, which suggests a non-cooperative isomerization process.

Multifunctional UV-NIR Dual Light-Responsive Soft Actuators from a Main-Chain Azobenzene Semi-Crystalline Poly(ester-amide) Doped with Polydopamine Nanoparticles.

The development of soft photoactuators with multifunctionality and improved performance is highly important for their broad applications. Herein, we report on a facile and efficient strategy for fabricating such photoactuators with UV-NIR dual light-responsivity, room-temperature 3D shape reprogrammability and reprocessability, and photothermal healability by doping polydopamine (PDA) nanoparticles into a main-chain azobenzene semi-crystalline poly(ester-amide) (PEA). The PEA/PDA nanoparticle composite was readily processed into free-standing films with enhanced mechanical and photomechanical properties compared with the blank PEA films. Its physically crosslinked uniaxially oriented films showed rapid and highly reversible photochemically induced bending/unbending under the UV/visible light irradiation at room temperature in both the air atmosphere and water. When exposed to the NIR light, they (and their bilayer films formed with a polyimide film) exhibited photothermally induced bending even at a temperature much lower than their crystalline-to-isotropic phase transition temperature based on a unique mechanism (involving photothermally induced polymer chain relaxation due to the disruption of their hydrogen bonds). The room-temperature 3D shape reprogrammability and reprocessability and photothermal healability of the composite polymer films were also demonstrated. Such multifunctional dual light-responsive photoactuators with well-balanced mechanical robustness, actuation stability, 3D shape reprogrammability/reprocessability and photothermal healability hold much promise in various photoactuating applications.

Voltage-Gated Ion Channels: Structure, Pharmacology and Photopharmacology.

Voltage-gated ion channels are transmembrane proteins responsible for the generation and propagation of action potentials in excitable cells. Over the last decade, advancements have enabled the elucidation of crystal structures of ion channels. This progress in structural understanding, particularly in identifying the binding sites of local anesthetics, opens avenues for the design of novel compounds capable of modulating ion conduction. However, many traditional drugs lack selectivity and come with adverse side effects. The emergence of photopharmacology has provided an orthogonal way of controlling the activity of compounds, enabling the regulation of ion conduction with light. In this review, we explore the central pore region of voltage-gated sodium and potassium channels, providing insights from both structural and pharmacological perspectives. We discuss the different binding modes of synthetic compounds that can physically occlude the pore and, therefore, block ion conduction. Moreover, we examine recent advances in the photopharmacology of voltage-gated ion channels, introducing molecular approaches aimed at controlling their activity by using photosensitive drugs.

Phase Behaviors and Photoresponsive Thin Films of Syndiotactic Side-Chain Liquid Crystalline Polymers with High Densely Substituted Azobenzene Mesogens.

Azobenzene-containing polymers (azopolymers) are a kind of fascinating stimuli-responsive materials with broad and versatile applications. In this work, a series of syndiotactic C1 type azopolymers of Pm-Azo-Cn with side-chain azobenzene mesogens of varied length alkoxy tails (n=1, 4, 8, 10) and different length alkyl spacers (m=6, 10) have been prepared via Rh-catalyzed carbene polymerization. The thermal properties and ordered assembly structures of thus synthesized side chain liquid crystalline polymers (SCLCPs) have been systematically investigated with differential scanning calorimetry (DSC), polarized optical microscopy (POM) and variable-temperature small/wide-angle X-ray scattering (SAXS/WAXS) analyses. P10-Azo-C1 and P10-Azo-C4 with shorter alkoxy tails exhibited hierarchical structures SmB/Colob and transformed into SmA/Colob at a higher temperature, while P10-Azo-C8 and P10-Azo-C10 with longer alkoxy tails only displayed side group dominated layered SmB phase and transformed into SmA phase at higher temperatures. For P6-Azo-C4 with a shorter spacer only showed a less ordered SmA phase owing to interference by partly coupling between the side chain azobenzene mesogens and the helical backbone. More importantly, the series high densely substituted syndiotactic C1 azopolymer thin films, exhibited evidently and smoothly reversible photoresponsive properties, which demonstrated promising photoresponsive device applications.

Photo-switching operation of MoS2field effect transistor by photoisomerization of azobenzene in solution delivered on a microfluidic platform.

Combining the photoisomerization of molecules with an electrical device is important for developing optoelectronic devices. Field effect transistors (FETs) with atomically thin channels are suitable for this purpose because the FET properties respond to chemical changes in molecules. Since the photoisomerization wavelength of the switching molecules can be tuned, complex logic operations can be realized if a specific molecule is delivered to the target FET of an integrated circuit. However, conventional techniques for transferring molecules, such as drop casting and sublimation, cannot efficiently realize this goal. In this study, we fabricated a MoS2FET device combined with a microfluidic platform, wherein the MoS2channel was in contact with the flow of an azobenzene solution in isopropyl alcohol as the solvent. UV radiation (365 nm) and thermal relaxation realize the cycle of trans- and cis-azobenzene states and the switching of the substantial FET properties. This study demonstrated the feasibility of using the solution for optical switching of the MoS2-FET, which can realize quick phase changes in the molecule and the delivery of the molecule to the target FET by a microfluidic platform.

Synthesis, Characterization and Evaluating Photochemical Properties of Porphyrin-substituted Azobenzene Structure.

Herein a new azobenzene-substituted porphyrin molecule was synthesized, characterized and its optoelectronic properties were investigated by combining the high optoelectronic properties of porphyrin with the photosensitive properties of azobenzene. The carboxylic acid of azobenzene was covalently connected to -OH group of the porphyrin ring by using Steglich esterification. Molecular structure of the obtained azobenzene-porphyrin (8), was elucidated, by FTIR, 1 H and 13 C NMR and HRMS. After structural characterization absorption and emission, characteristics were determined in solvents that have different. And also, optical and fluorescence behaviors in the range of different acid pH with trans-cis photoisomerization behaviors were investigated in aqueous-THF solution in acid media.