γ-Cyclodextrins as Supramolecular Reactors for the Three-component Aza-Darzens Reaction in Water.

In recent decades, many efforts have been devoted to studying reactions catalyzed in nanoconfined spaces. The most impressive aspect of catalysis in nanoconfined spaces is that the reactivity of the molecules can be smartly driven to disobey classical behavior. A green and efficient three-component aza-Darzens (TCAD) reaction using a catalytic amount of γ-cyclodextrins (CDs) in water has been developed to synthesize N-phenylaziridines. CDs effectively performed this reaction in an environmentally friendly setting, achieving good yields. The same reaction was then performed using polymeric γ-CD such as a γ-cyclodextrin polymer crosslinked (GCDPC) with epichlorohydrin, a sponge-like macroporous γ-cyclodextrin-based cryogel (GCDC), and a γ-cyclodextrin-based hydrogel (GCDH). The homogeneous and heterogeneous catalyst recovery was then studied, and it was proved to be easily recycled several times without relevant activity loss. Water, as a unique and eco-friendly reaction medium, has been utilized for the first time, to the best of our knowledge, in this reaction. The inclusion of the reagents in CDs has been studied and rationalized by NMR spectroscopy experiments and molecular modeling calculations. The credit of the presented protocol includes good yields and catalyst reusability and precludes the use of organic solvents.

A Cyclodextrin Polymer as Supramolecular Matrix for Scalable Green Photooxygenation of Hydrophobic Substrates in Homogeneous Phase.

In the quest for new therapies targeting hypoxia, aromatic endoperoxides have intriguing potential as oxygen releasing agents (ORAs) able to free O2 in tissues upon suitable trigger. Four aromatic substrates were synthesized and the formation of their corresponding endoperoxides was optimized in organic solvent upon selective irradiation of Methylene Blue, a low-cost photocatalyst, producing the reactive singlet oxygen species. Complexation of the hydrophobic substrates within a hydrophilic cyclodextrin (CyD) polymer allowed their photooxygenation in homogeneous aqueous environment using the same optimized protocol upon dissolution in water of the three readily accessible reagents. Notably, reaction rates were comparable in buffered D2 O and organic solvent and, for the first time, the photooxygenation of highly hydrophobic substrates was achieved for millimolar solutions in non-deuterated water. Quantitative conversion of the substrates, straightforward isolation of the endoperoxides and recovery of the polymeric matrix were achieved. Cycloreversion of one ORA to the original aromatic substrate was observed upon thermolysis. These results hold great potential for the launch of CyD polymers both as reaction vessels for green, homogeneous photocatalysis and as carrier for the delivery of ORAs in tissues.

Trace Organic Contaminant Removal from Municipal Wastewater by Styrenic ß-Cyclodextrin Polymers.

Trace organic contaminants (TrOCs) present major removal challenges for wastewater treatment. TrOCs, such as perfluoroalkyl and polyfluoroalkyl substances (PFAS), are associated with chronic toxicity at ng L-1 exposure levels and should be removed from wastewater to enable safe reuse and release of treated effluents. Established adsorbents, such as granular activated carbon (GAC), exhibit variable TrOC removal and fouling by wastewater constituents. These shortcomings motivate the development of selective novel adsorbents that also maintain robust performance in wastewater. Cross-linked ß-cyclodextrin (ß-CD) polymers are promising adsorbents with demonstrated TrOC removal efficacy. Here, we report a simplified and potentially scalable synthesis of a porous polymer composed of styrene-linked ß-CD and cationic ammonium groups. Batch adsorption experiments demonstrate that the polymer is a selective adsorbent exhibiting complete removal for six out of 13 contaminants with less adsorption inhibition than GAC in wastewater. The polymer also exhibits faster adsorption kinetics than GAC and ion exchange (IX) resin, higher adsorption affinity for PFAS than GAC, and is regenerable by solvent wash. Rapid small-scale column tests show that the polymer exhibits later breakthrough times compared to GAC and IX resin. These results demonstrate the potential for ß-CD polymers to remediate TrOCs from complex water matrices.

ß-Cyclodextrin Polymer-Based Fluorescence Enhancement Strategy via Host-Guest Interaction for Sensitive Assay of SARS-CoV-2.

Nucleocapsid protein (N protein) is an appropriate target for early determination of viral antigen-based severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). We have found that ß-cyclodextrin polymer (ß-CDP) has shown a significant fluorescence enhancement effect for fluorophore pyrene via host-guest interaction. Herein, we developed a sensitive and selective N protein-sensing method that combined the host-guest interaction fluorescence enhancement strategy with high recognition of aptamer. The DNA aptamer of N protein modified with pyrene at its 3' terminal was designed as the sensing probe. The added exonuclease I (Exo I) could digest the probe, and the obtained free pyrene as a guest could easily enter into the hydrophobic cavity of host ß-CDP, thus inducing outstanding luminescent enhancement. While in the presence of N protein, the probe could combine with it to form a complex owing to the high affinity between the aptamer and the target, which prevented the digestion of Exo I. The steric hindrance of the complex prevented pyrene from entering the cavity of ß-CDP, resulting in a tiny fluorescence change. N protein has been selectively analyzed with a low detection limit (11.27 nM) through the detection of the fluorescence intensity. Moreover, the sensing of spiked N protein from human serum and throat swabs samples of three volunteers has been achieved. These results indicated that our proposed method has broad application prospects for early diagnosis of coronavirus disease 2019.

Validation and application of diffusive gradient in thin-film (DGT) equipped novel cyclodextrin polymer gels for monitoring endocrine disrupting chemicals (EDCs) and environmental risk assessment in the Taihu lake basin.

Taihu Lake is the most important drinking water source of the major cities in the Yangtze River Delta. The pollution of endocrine disruptors (EDCs)in Taihu Lake has been increasing recently, the accurate determination is an important guide for predicting its health risks and developing appropriate controls. Monitoring organic pollutants in water using the diffusive gradient in thin film technique (DGT) has attracted much attention due to more accuracy and convenience than the grab sampling methods. In this study, a novel cyclodextrin polymer (CDP) synthesized by the simple and green method in water was taken as an adsorbent for the binding gel. Four endocrine-disrupting chemicals (EDCs), bisphenol A (BPA), 17α-ethinylestradiol (EE2), 17ß-estradiol (E2), and estriol (E3), were taken as models to determine the diffusion coefficients (4.68 × 10-6, 3.38 × 10-6, 3.34 × 10-6 and 4.31 × 10-6 cm2/s) and to test the performance of DGT, such as adsorption capacity and deployment time (1-5 day). The assembled CDP-DGT was adopted to determine four EDCs in a simulated water environment (3-9 of pH, 0.001-0.5 M of ionic strength (IS), and dissolved organic matter (DOM) of 0-20 mg/L). The ability of CDP-DGT sampling was verified in the Jiuxiang River and was carried out for a large-scale field application of in situ sampling EDCs in Taihu Lake basin. The results show that the total EDCs concentration range and the estradiol equivalent concentrations (EEQ) in Taihu Lake and its main rivers are 2.78 ng/L to 11.08 ng/L and 2.62 ng/L to 10.91 ng/L, respectively. The risk quotients (RQs) of all sampling sites in the region were greater than 1, indicating that EDCs pose a serious threat to aquatic organisms in the area. Therefore, the monitoring of EDCs in the Taihu Lake basin should be further strengthened.

Phenylpropanoids in Silybum marianum cultures treated with cyclodextrins coated with magnetic nanoparticles.

The glucose oligosaccharide-derived cyclodextrins (CDs) are used for improving bioactive compound production in plant cell cultures because, in addition to their elicitation activity, CDs promote product removal from cells. However, despite these advantages, the industrial application of CDs is hampered by their high market price. A strategy to overcome this constraint was recently tested, in which reusable CD polymers coated with magnetic Fe3O4 nanoparticles were harnessed in Vitis vinifera cell cultures to produce t-resveratrol (t-R). In this study, we applied hydroxypropyl-ß-CDs (HPCD) and HPCDs coated with magnetic nanoparticles (HPCD-EPI-MN) in methyl jasmonate (MJ)-treated transgenic Silybum marianum cultures ectopically expressing either a stilbene synthase gene (STS) or a chalcone synthase gene (CHS), and compared their effects on the yields of t-R and naringenin (Ng), respectively. HPCD-EPI-MN at 15 g/L stimulated the accumulation of metabolites in the culture medium of the corresponding transgenic cell lines, with up to 4 mg/L of t-R and 3 mg/L of Ng released after 3 days. Similar amounts were produced in cultures treated with HPCD. Concentrations higher than 15 g/L of HPCD-EPI-MN and prolonged incubation periods negatively affected cell growth and viability in both transgenic cell lines. Reutilization of HPCD-EPI-MN was possible in three elicitation cycles (72 h each), after which the polymer retained 25-30% of its initial efficiency, indicating good stability and reusability. Due to their capacity to adsorb metabolites and their recyclability, the application of magnetic CD polymers may reduce the costs of establishing efficient secondary metabolite production systems on a commercial scale. KEY POINTS: • Long-term transgenic S. marianum suspensions stably produce transgene products • t-R and Ng accumulated extracellularly in cultures elicited with HPCD and HPCD-EPI-MN • The recyclability of HPCD-EPI-MN for metabolite production was proven.

Supramolecular Design Strategy of a Water-Soluble Diphenylguanidine-Cyclodextrin Polymer Inclusion Complex.

Diphenylguanidine (DPG) is a widely used secondary accelerator for the vulcanization of natural rubber (NR) latex. However, its low water solubility and high toxicity limit its use in high-end NR products. In this study, a water-soluble inclusion complex of DPG and a ß-cyclodextrin polymer (ß-CDP), termed DPG-ß-CDP, was prepared through supramolecular interactions and characterized using Fourier-transform infrared spectroscopy, 1H NMR, scanning electron microscopy, and UV-vis spectroscopy techniques. In comparison with that of DPG, the water solubility of DPG-ß-CDP was greatly enhanced because of the water-soluble host molecule. The molar ratio of DPG to the CD unit in ß-CDP was determined to be 1:1. At 25 °C, the binding constant of DPG-ß-CDP was found to be 9.2 × 105 L/mol by UV-vis spectroscopy. The proposed method for forming inclusion complexes with high potential for use as water-soluble vulcanization accelerators is promising.

Fabrication and Characterisation of Organic EL Devices in the Presence of Cyclodextrin as an Interlayer.

This study examined glass-based organic electroluminescence in the presence of a cyclodextrin polymer as an interlayer. Glass-based organic electroluminescence was achieved by the deposition of five layers of N,N'-Bis(3-methylphenyl)N,N'-bis(phenyl)-benzidine, cyclodextrin polymer (CDP), tris-(8-hydroxyquinolinato) aluminium LiF and Al on an indium tin oxide-coated glass substrate. The glass-based OEL exhibited green emission owing to the fluorescence of tris-(8-hydroxyquinolinato) aluminium. The highest luminance was 19,620 cd m-2. Moreover, the glass-based organic electroluminescence device showed green emission at 6 V in the curved state because of the inhibited aggregation of the cyclodextrin polymer. All organic molecules are insulating, but except CDP, they are standard molecules in conventional organic electroluminescence devices. In this device, the CDP layer contained pores that could allow conventional organic molecules to enter the pores and affect the organic electroluminescence interface. In particular, self-association was suppressed, efficiency was improved, and light emission was observed without the need for a high voltage. Overall, the glass-based organic electroluminescence device using CDP is an environmentally friendly device with a range of potential energy saving applications.

Ag Nanoparticles Stabilized on Cyclodextrin Polymer Decorated with Multi-Nitrogen Atom Containing Polymer: An Efficient Catalyst for the Synthesis of Xanthenes.

In attempt to broaden the use of cyclodextrin polymer for catalytic purposes, a novel covalent hybrid system was prepared through growth of multi-nitrogen atom containing polymer (PMelamine) derived from reaction of ethylenediamine and 2,4,6-trichloro-1,3,5-triazine on the functionalized cyclodextrin polymer (CDNS). The resulting hybrid system was then utilized as a catalyst support for the immobilization of silver nanoparticles through using Cuscuta epithymum extract as a naturally-derived reducing agent. The catalytic activity of the catalyst, Ag@CDNS-N/PMelamine, for the synthesis of xanthenes through reaction of aldehydes and dimedone in aqueous media was examined. The results showed high catalytic activity and recyclability of the catalyst. It was believed that cyclodextrin in the backbone of the catalyst could act both as a capping agent for Ag nanoparticles and phase transfer agent to bring the hydrophobic substrates in the vicinity of the catalytic active sites and accelerate the reaction rate. Multi-nitrogen atoms on the polymer, on the other hand, could improve the Ag NPs anchoring and suppress their leaching.

Fibrin gels entrapment of a doxorubicin-containing targeted polycyclodextrin: Evaluation of in vivo antitumor activity in orthotopic models of human neuroblastoma.

In vivo local antitumor activity of fibrin gels (FBGs) loaded with the poly-cyclodextrin oCD-NH2/Dox, compared to free Dox, was evaluated in two mouse orthotopic neuroblastoma (NB) models, after positioning of the releasing devices in the visceral space. FBGs were prepared at the fibrinogen (FG) concentrations of 22 and 40 mg/ml clotted in the presence of 0.81 mM/mg FG Ca2+ and 1.32 U/mg FG thrombin. Our results indicate that FBGs loaded with oCD-NH2/Dox and applied as neoadjuvant loco-regional treatment, show an antitumor activity significantly greater than that displayed by the same FBGs loaded with identical dose of Dox or after free Dox administered intra venous (iv). In particular, FBGs prepared at 40 mg/ml showed a slightly lower antitumor activity, although after their positioning we observed a significant initial reduction of tumor burden lasting for several days after gel implantation. FBGs at 22 mg/ml loaded with oCD-NH2/Dox and applied after tumor removal (adjuvant treatment model) showed a significantly better antitumor activity than the iv administration of free Dox, with 90% tumor regrowth reduction compared to untreated controls. In all cases the weight loss post-treatment was limited after gel application, although in the adjuvant treatment the loss of body weight lasted longer than in the other treatment modality. In accordance with our recent published data on the low local toxic effects of FBGs, the present findings also underline an increase of the therapeutic index of Dox when locally administered through FBGs loaded with the oCD-NH2/Dox complex.

Fibrin Gels Entrapment of a Poly-Cyclodextrin Nanocarrier as a Doxorubicin Delivery System in an Orthotopic Model of Neuroblastoma: Evaluation of In Vitro Activity and In Vivo Toxicity.

PURPOSE: Fibrin gels (FBGs) are potential delivery vehicles for many drugs, and can be easily prepared from purified components. We previously demonstrated their applicability for the release of different doxorubicin (Dox) nanoparticles used clinically or in an experimental stage, such as its inclusion complex with the amino ß-cyclodextrin polymer (oCD-NH2/Dox). Here we extend these studies by in vitro and in vivo evaluations. METHODS: An in vitro cytotoxicity model consisting of an overlay of a neuroblastoma (NB) cell-containing agar layer above a drug-loaded FBG layer was used. Local toxicity in vivo (histology and blood analysis) was studied in a mouse orthotopic NB model (SHSY5YLuc+ cells implanted into the left adrenal gland). RESULTS: In vitro data show that FBGs loaded with oCD-NH2/Dox have a slightly lower cytotoxicity against NB cell lines than those loaded with Dox. Fibrinogen (FG), and Ca2+ concentrations may modify this activity. In vivo data support a lower general and local toxicity for FBGs loaded with oCD-NH2/Dox than those loaded with Dox. CONCLUSION: Our results suggest a possible increase of the therapeutic index of Dox when locally administered through FBGs loaded with oCD-NH2/Dox, opening the possibility of using these releasing systems for the treatment of neuroblastoma.

Aerogels prepared from polymeric ß-cyclodextrin and graphene aerogels as a novel host-guest system for immobilization of antibodies: a voltammetric immunosensor for the tumor marker CA 15-3.

A three-dimensional porous network graphene aerogel (GAs) with large specific area and excellent conductivity was loaded with ß-cyclodextrin polymer (Pß-CD) to serve as a support for immobilization of antibodies. A highly sensitive immunosensor for the cancer marker carbohydrate antigen 15-3 (CA15-3) was designed based on the use of Pß-CD/GAs. The large specific area of GAs warrants high loading with antibodies, and their excellent electrical conductivity warrants strong electrical signals. Based on the synergistic effect of GAs and Pß-CD, an immunoassay was designed that is making use of hexacyanoferrate as an electrochemical probe and having a pleasantly low working potential of 0.2 V (vs. SCE). Response is linear in the 0.1 mU mL-1 to 100 U mL-1 activity range, and the lower detection limit is 0.03 mU mL-1 (at S/N = 3). The immunoassay is stable, selective and reproducible. It was applied to the analysis of spiked samples, and results were satisfactory. Graphical abstract Schematic of an electrochemical immunoassay for the carbohydrate antigen 15-3. It is based on the use of ß-cyclodextrin polymer and a graphene aerogel.

Characterization of Curcumin/Cyclodextrin Polymer Inclusion Complex and Investigation on Its Antioxidant and Antiproliferative Activities.

The aims of this study were to characterize the curcumin/cyclodextrin polymer inclusion complex using X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and UV⁻vis spectroscopy, and to determine the antioxidant activity of this complex by methods of scavenging 2,2-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radicals assays and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals assays. The inhibitory effect of inclusion complex on A375 cells was also investigated by CCK-8 assay, Annexin-V/PI staining assay, and caspase activity assay. The results showed that the complex exhibited different physicochemical characteristics from that of free curcumin. Moreover, the inclusion complex exhibited novel antioxidant activity by scavenging the ABTS and DPPH free radicals and displayed higher antiproliferative activity on A375 cells. Further investigation revealed that inclusion complex could induce A375 cell apoptosis. These findings suggest that inclusion complex could be developed as a novel natural antioxidant with potential applications in cancer chemoprevention.

Determination of Rhodamine B in Food Samples by Fe3O4@ Ionic Liquids-ß-Cyclodextrin Cross Linked Polymer Solid Phase Extraction Coupled with Fluorescence Spectrophotometry.

Fe3O4@Ionic liquids ß-cyclodextrin polymer(Fe3O4@ mono-6- deoxy-6- (1-ethyl- imidazolium)-ß-cyclodextrin iodide polymer, ILs-ß-CDCP) was prepared. A novel method based on Fe3O4@ILs-ß-CDCP solid phase extraction coupled with fluorescence spectrophotometry for Rhodamine B (RhB) determination, was investigated. Results were shown that RhB was adsorbed on Fe3O4@ILs-ß-CDCP and eluted with sodium dodecyl sulfate (SDS) (1.0%) rapidly. Different parameters, such as pH, adsorption time and volume, eluent volume and time were studied. This method introduced linearity for RhB between 0.01-9.00 µg/mL-1 , the limit of detection was 5.2 ng/mL-1 , correlation coefficient (R) was >0.9987 and the relative standard deviation (RSD) was 3.1% (n = 3, c = 4.00 µg/mL). The mechanism of adsorption of RhB on Fe3O4@ILs-ß-CDCP was studied through the FTIR analysis and the inclusion constant of Fe3O4@ILs-ß-CDCP-RhB. This method was applied successfully for determination of RhB in real samples with satisfactory results.

Synthesis and applications of sulfopropyl ether γ-cyclodextrin polymer as chiral selector in capillary electrophoresis.

A novel sulfopropyl ether γ-cyclodextrin polymer (SPE-γ-CDP) through polycondensating sulfated cyclodextrins (SCDs) was synthesized. This synthesis approach also has the potential of preparing other derived cyclodextrins (CDs) polymers. The polymerized SCDs took on both the properties of SCDs and certain characteristics of polymers, such as chiral selectivity and high viscosity. Synthesis parameters, including reactions sequence, sulfation, and polycondensation conditions were investigated systematically. The product was characterized by elemental analysis, infrared spectroscopy (IR), and indirect UV detections prior to use as background electrolytes additive. The separation conditions, including the concentration of SPE-γ-CDP, the concentration and pH of running buffer, separation voltage, as well as the additional organic solution were optimized during chiral separation of neutral, acidic, and basic enantiomers in capillary electrophoresis (CE). SPE-γ-CDP was proven to be an effective chiral resolving agent in CE with the advantages of simple synthesis process, low cost, similar ratio of charge-to-mass, low current, great reproducibility, and reusability. Graphical Abstract Synthesis and applications of sulfopropyl ether γ-cyclodextrin polymer.

Stabilization of nanosized titanium dioxide by cyclodextrin polymers and its photocatalytic effect on the degradation of wastewater pollutants.

Advanced oxidation processes (AOPs) are considered highly competitive water treatment technologies for the removal of organic pollutants. Among AOP techniques, photocatalysis has recently been the most widely studied. Our aims were to investigate how the dispersion of nanosized titanium dioxide (nanoTiO2) applied in photodegradation-based procedures can be stabilized with cyclodextrins in order to obtain a new, more efficient photocatalyst for the purification of waters polluted by xenobiotics applying UV irradiation. During our work, on the one hand, we studied the behavior and stability of nanoTiO2 in cyclodextrin solutions. On the other hand, we used various monomer and polymer cyclodextrin derivatives, and assessed the options for nanoTiO2 stabilization in the presence of various salts and tap water on the basis of turbidity tests. The physical stability of nanoTiO2 dispersions is diminished in the presence of the salts found in tap water (and occurring also in surface waters and ground water) and they are precipitated immediately. This colloidal instability can be improved by cyclodextrin derivatives. Based on the results of our studies we have selected carboxymethyl ß-cyclodextrin polymer (CMBCD-P) for stabilization of nanoTiO2 dispersions. The photocatalytic degradation of methylene blue and ibuprofen as model organic pollutants in various media (distilled water, NaCl solution and tap water) has been studied using nanoTiO2 as catalyst stabilized by CMBCD-P. CMBCD-P itself showed a catalytic effect on the UV degradation of methylene blue. In addition to enhancing the colloid stability of nanoTiO2 CMBCD-P showed also synergistic effects in catalyzing the photodecomposition process of the dye. On the other hand, ibuprofen as a model pharmaceutical, a pollutant of emerging concern (EP), was protected by CMBCD-P against the photocatalytic degradation showing that inclusion complex formation can result in opposite effects depending on the structure of the host-guest complex.

Preparation of Pickering emulsions through interfacial adsorption by soft cyclodextrin nanogels.

BACKGROUND: Emulsions stabilized by colloidal particles are known as Pickering emulsions. To date, soft microgel particles as well as inorganic and organic particles have been utilized as Pickering emulsifiers. Although cyclodextrin (CD) works as an attractive emulsion stabilizer through the formation of a CD-oil complex at the oil-water interface, a high concentration of CD is normally required. Our research focuses on an effective Pickering emulsifier based on a soft colloidal CD polymer (CD nanogel) with a unique surface-active property. RESULTS: CD nanogels were prepared by crosslinking heptakis(2,6-di-O-methyl)-ß-cyclodextrin with phenyl diisocyanate and subsequent immersion of the resulting polymer in water. A dynamic light scattering study shows that primary CD nanogels with 30-50 nm diameter assemble into larger CD nanogels with 120 nm diameter by an increase in the concentration of CD nanogel from 0.01 to 0.1 wt %. The CD nanogel has a surface-active property at the air-water interface, which reduces the surface tension of water. The CD nanogel works as an effective Pickering emulsion stabilizer even at a low concentration (0.1 wt %), forming stable oil-in-water emulsions through interfacial adsorption by the CD nanogels. CONCLUSION: Soft CD nanogel particles adsorb at the oil-water interface with an effective coverage by forming a strong interconnected network and form a stable Pickering emulsion. The adsorption property of CD nanogels on the droplet surface has great potential to become new microcapsule building blocks with porous surfaces. These microcapsules may act as stimuli-responsive nanocarriers and nanocontainers.

Linear-g-hyperbranched and cyclodextrin-based amphiphilic block copolymer as a multifunctional nanocarrier.

In this paper, a novel, multifunctional polymer nanocarrier was designed to provide adequate volume for high drug loading, to afford a multiregion encapsulation ability, and to achieve controlled drug release. An amphiphilic, triblock polymer (ABC) with hyperbranched polycarbonsilane (HBPCSi) and ß-cyclodextrin (ß-CD) moieties were first synthesized by the combination of a two-step reversible addition-fragmentation transfer polymerization into a pseudo-one-step hydrosilylation and quaternization reaction. The ABC then self-assembled into stable micelles with a core-shell structure in aqueous solution. These resulting micelles are multifunctional nanocarriers which possess higher drug loading capability due to the introduction of HBPCSi segments and ß-CD moieties, and exhibit controlled drug release based on the diffusion release mechanism. The novel multifunctional nanocarrier may be applicable to produce highly efficient and specialized delivery systems for drugs, genes, and diagnostic agents.

Development of a Novel Cyclodextrin-Chitosan Polymer for an Efficient Removal of Pharmaceutical Contaminants in Aqueous Solution.

A novel polymer synthesized by grafting three cyclodextrins onto chitosan was characterized and evaluated for its potential to adsorb two pharmaceutical residues: ibuprofen and progesterone. The influence of various operational parameters, including contact time, initial molecule concentration, pH, ionic strength, and temperature, was investigated. The synthesized polymer exhibits an amorphous and porous structure with a remarkable swelling capacity of 9.5 mmol/g. It demonstrates remarkable adsorption capacities for progesterone and ibuprofen, reaching 90% and 75%, respectively. Kinetic studies reveal that the adsorption of both molecules follows a pseudo-second-order model. A DSC analysis elucidated the adsorption mechanism, which is governed by the formation of inclusion complexes and electrostatic interactions within the polymer network. The polymer's regeneration after 23 cycles demonstrates its sustainable adsorption efficiency. The combination of chitosan with three cyclodextrins opens up promising new avenues for water treatment and the removal of specific pollutants. This approach significantly improves the material's selectivity towards target pollutants, offering a significant advantage in pollution remediation applications.

Structural Features of Styrene-Functionalized Cyclodextrin Polymers That Promote the Adsorption of Perfluoroalkyl Acids in Water.

Cross-linked ß-cyclodextrin (ß-CD) polymers are promising adsorbents for the removal of per- and polyfluoroalkyl substances (PFAS) from contaminated water sources, including contaminated groundwater, drinking water, and wastewater. We previously reported porous, styrene-functionalized ß-cyclodextrin (StyDex) polymers derived from radical polymerization with vinyl comonomers. Because of the versatility of these polymerizations, StyDex polymer compositions are tunable, which facilitates efforts to establish structure-adsorption relationships and to discover improved materials. Here, we evaluate the material properties and PFAS adsorption of 20 StyDex derivatives with varied comonomer structure and loading, regiochemistry of styrene placement on the CD monomer, and CD size. A StyDex polymer containing N,N'-dimethylbutyl ammonium ions exhibited the most effective PFAS adsorption in batch experiments. Furthermore, a StyDex polymer containing ß-CD exhibited size-selective host-guest interactions with perfluoroalkyl acids (PFAAs) and neutral contaminants in aqueous electrolyte when compared to similar polymers containing either α-CD or γ-CD. Polymers based on ß-CD monomers with an average of seven styrene groups randomly positioned over the 21 available hydroxyl groups performed similarly to those based on a ß-CD monomer functionalized regiospecifically at each of the seven 6' positions. The former ß-CD monomer is prepared in a single step from unmodified ß-CD, so the ability to use it without compromising performance demonstrates promise for developing economically competitive adsorbents. These results offered important insights into structure-adsorption properties of StyDex polymers and will inform the design of improved StyDex formulations.