Regulating Anionic Redox via Mg Substitution in Mn-Rich Layered Oxide Cathodes Enabling High Electrochemical Stability for Sodium-Ion Batteries.

With the limited resources and high cost of lithium-ion batteries (LIBs) and the ever-increasing market demands, sodium-ion batteries (SIBs) gain much interest due to their economical sustainability, and similar chemistry and manufacturing processes to LIBs. As cathodes play a vital role in determining the energy density of SIBs, Mn-based layered oxides are promising cathodes due to their low cost, environmental friendliness, and high theoretical capacity. However, the main challenge is structural instability upon cycling at high voltage. Herein, Mg is introduced into the P2-type Na0.62 Ni0.25 Mn0.75 O2 cathode to enhance electrochemical stability. By combining electrochemical testing and material characterizations, it is found that substituting 10 mol% Mg can effectively alleviate the P2-O2 phase transition, Jahn-Teller distortion, and irreversible oxygen redox. Moreover, structural integrity is greatly improved. These lead to enhanced electrochemical performances. With the optimized sample, a remarkable capacity retention of 92% in the half cell after 100 cycles and 95% in the full cell after 170 cycles can be achieved. Altogether, this work provides an alternative way to stabilize P2-type Mn-based layer oxide cathodes, which in turn, put forward the development of this material for the next-generation SIBs.

Molybdenum-Doped Cobalt-Free Cathode Realizing the Electrochemical Stability by Enhanced Covalent Bonding.

The doping strategy effectively enhances the capacity and cycling stability of cobalt-free nickel-rich cathodes. Understanding the intrinsic contributions of dopants is of great importance to optimize the performances of cathodes. This study investigates the correlation between the structure modification and their performances of Mo-doped LiNi0.8Mn0.2O2 (NM82) cathode. The role of doped Mo's valence state has been proved functional in both lattice structural modification and electronic state adjustment. Although the high-valence of Mo at the cathode surface inevitably reduces Ni valence for electronic neutrality and thus causes ion mixing, the original Mo valence will influence its diffusion depth. Structural analyses reveal Mo doping leads to a mixed layer on the surface, where high-valence Mo forms a slender cation mixing layer, enhancing structural stability and Li-ion transport. In addition, it is found that the high-valence dopant of Mo6+ ions partially occupies the unfilled 4d orbitals, which may strengthen the Mo─O bond through increased covalency and therefore reduce the oxygen mobility. This results in an impressive capacity retention (90.0% after 200 cycles) for Mo-NM82 cathodes with a high Mo valence state. These findings underscore the valence effect of doping on layered oxide cathode performance, offering guidance for next-generation cathode development.

Defensive and Ion Conductive Surface Layer Enables High Rate and Durable O3-type NaNi1/3 Fe1/3 Mn1/3 O2 Sodium-Ion Battery Cathode.

Na-based layered transition metal oxides with an O3-type structure are considered promising cathodes for sodium-ion batteries. However, rapid capacity fading, and poor rate performance caused by serious structural changes and interfacial degradation hamper their use. In this study, a NaPO3 surface modified O3-type layered NaNi1/3 Fe1/3 Mn1/3 O2 cathode is synthesized, with improved high-voltage stability through protecting layer against acid attack, which is achieved by a solid-gas reaction between the cathode particles and gaseous P2 O5 . The NaPO3 nanolayer on the surface effectively stabilizes the crystal structure by inhibiting surface parasitic reactions and increasing the observed average voltage. Superior cyclic stability is exhibited by the surface-modified cathode (80.1% vs 63.6%) after 150 cycles at 1 C in the wide voltage range of 2.0 V-4.2 V (vs Na+ /Na). Moreover, benefiting from the inherent ionic conduction of NaPO3 , the surface-modified cathode presents excellent rate capability (103 mAh g-1  vs 60 mAh g-1 ) at 10 C. The outcome of this study demonstrates a practically relevant approach to develop high rate and durable sodium-ion battery technology.

Unexpected Elevated Working Voltage by Na+/Vacancy Ordering and Stabilized Sodium-Ion Storage by Transition-Metal Honeycomb Ordering.

Na+/vacancy ordering in sodium-ion layered oxide cathodes is widely believed to deteriorate the structural stability and retard the Na+ diffusion kinetics, but its unexplored potential advantages remain elusive. Herein, we prepared a P2-Na0.8Cu0.22Li0.08Mn0.67O2 (NCLMO-12 h) material featuring moderate Na+/vacancy and transition-metal (TM) honeycomb orderings. The appropriate Na+/vacancy ordering significantly enhances the operating voltage and the TM honeycomb ordering effectively strengthens the layered framework. Compared with the disordered material, the well-balanced dual-ordering NCLMO-12 h cathode affords a boosted working voltage from 2.85 to 3.51 V, a remarkable ~20 % enhancement in energy density, and a superior cycling stability (capacity retention of 86.5 % after 500 cycles). The solid-solution reaction with a nearly "zero-strain" character, the charge compensation mechanisms, and the reversible inter-layer Li migration upon sodiation/desodiation are unraveled by systematic in situ/ex situ characterizations. This study breaks the stereotype surrounding Na+/vacancy ordering and provides a new avenue for developing high-energy and long-durability sodium layered oxide cathodes.

Surface Gradient Desodiation Chemistry in Layered Oxide Cathode Materials.

Sodium-ion batteries (SIBs) as a promising technology for large-scale energy storage have received unprecedented attention. However, the cathodes in SIBs generally suffer from detrimental cathode-electrolyte interfacial side reactions and structural degradation during cycling, which leads to severe capacity fade and voltage decay. Here, we have developed an ultra-stable Na0.72Ni0.20Co0.21Mn0.55Mg0.036O2 (NCM-CS-GMg) cathode material in which a Mg-free core is encapsulated by a shell with gradient distribution of Mg using coprecipitation method with Mg-hysteretic cascade feedstock followed by calcination. From the interior to outer surface of the shell, as the content of electrochemically inactive Mg gradually increases, the Na+ deintercalation amount gradually decreases after charged. Benefiting from this surface gradient desodiation, the surface transition metal (TM) ion migration from TM layers to Na layers is effectively inhibited, thus suppressing the layered-to-rock-salt phase transition and the resultant microcracks. Besides, the less formation of high-valence TM ions on the surface contributes to a stable cathode-electrolyte interface. The as-prepared NCM-CS-GMg exhibits remarkable cycling life over 3000 cycles with a negligible voltage drop (0.127 mV per cycle). Our findings highlight an effective way to developing sustainable cathode materials without compromising on the initial specific capacity for SIBs.

High Voltage Ga-Doped P2-Type Na2/3 Ni0.2 Mn0.8 O2 Cathode for Sodium-Ion Batteries.

Ni/Mn-based oxide cathode materials have drawn great attention due to their high discharge voltage and large capacity, but structural instability at high potential causes rapid capacity decay. How to moderate the capacity loss while maintaining the advantages of high discharge voltage remains challenging. Herein, the replacement of Mn ions by Ga ions is proposed in the P2-Na2/3 Ni0.2 Mn0.8 O2 cathode for improving their cycling performances without sacrificing the high discharge voltage. With the introduction of Ga ions, the relative movement between the transition metal ions is restricted and more Na ions are retained in the lattice at high voltage, leading to an enhanced redox activity of Ni ions, validated by ex situ synchrotron X-ray absorption spectrum and X-ray photoelectron spectroscopy. Additionally, the P2-O2 phase transition is replaced by a P2-OP4 phase transition with a smaller volume change, reducing the lattice strain in the c-axis direction, as detected by operando/ex situ X-ray diffraction. Consequently, the Na2/3 Ni0.21 Mn0.74 Ga0.05 O2 electrode exhibits a high discharge voltage close to that of the undoped materials, while increasing voltage retention from 79% to 93% after 50 cycles. This work offers a new avenue for designing high-energy density Ni/Mn-based oxide cathodes for sodium-ion batteries.

Localized High-Concentration Electrolytes with Low-Cost Diluents Compatible with Both Cobalt-Free LiNiO2 Cathode and Lithium-Metal Anode.

High-nickel layered oxide cathodes and lithium-metal anode are promising candidates for next-generation battery systems due to their high energy density. Nevertheless, the instability of the electrode-electrolyte interphase is hindering their practical application. Localized high-concentration electrolytes (LHCEs) present a promising solution for achieving uniform lithium deposition and a stable cathode-electrolyte interphase. However, the limited choice of diluents and their high cost are restricting their implementation. Four novel cost-effective diluents and their performance with highly reactive LiNiO2 cathode and Li-metal anode are reported here. The results show that all the LHCE cells exhibit a Coulombic efficiency of >99.38% in Li | Cu cells and a capacity retention of >85% in Li | LiNiO2 cells after 250 cycles. Advanced characterizations unveil that the stable cell operation is due to well-tuned electrode-electrolyte interphases and Li deposition morphology. In addition, online electrochemical mass spectroscopy and differential scanning calorimetry reveal that the gas generation and heat-release are greatly reduced with the LHCEs presented. Overall, the study provides new insights into the role of diluents in LHCEs and offers valuable guidance for further optimization of LHCEs for high energy density lithium-metal batteries.

Nb2O5 Coating to Improve the Cyclic Stability and Voltage Decay of Li-Rich Cathode Material for Lithium-Ion Battery.

The commercialization of lithium manganese oxide (LMO) is seriously hindered by several drawbacks, such as low initial Coulombic efficiency, the degradation of the voltage and capacity during cycling, and the poor rating performance. Developing a simple and scalable synthesis for engineering with surface coating layers is significant and challenging for the commercial prospects of LMO oxides. Herein, we have proposed an efficient engineering strategy with a Nb2O5 coating layer. We dissolved niobate (V) ammonium oxalate hydrate and stoichiometric rich LMO (RLM) in deionized water and stirred constantly. Then, the target product was calcined at high temperature. The discharge capacity of the Nb2O5 coating RLM is increased from 195 mAh·g-1 (the RLM without Nb2O5) to 215 mAh·g-1 at a coating volume ratio of 0.010. The average voltage decay was 4.38 mV/cycle, which was far lower than the 7.50 mV/cycle for the pure LMO. The electrochemical kinetics results indicated that the performance was superior with the buffer engineering by the Nb2O5 coating of RLM, which provided an excellent lithium-ion conduction channel, and improved diffusion kinetics, capacity fading, and voltage decay. This reveals the strong potential of the Nb2O5 coating in the field of cathode materials for lithium-ion batteries.

Achieving High Stability and Performance in P2-Type Mn-Based Layered Oxides with Tetravalent Cations for Sodium-Ion Batteries.

P2-type sodium-manganese-based layered cathodes, owing to their high capacity from both cationic and anionic redox, are a potential candidate for Na-ion batteries (NIBs) to replace Li-ion technology in certain applications. Still, the structure instability originating from irreversible oxygen redox at high voltage remains a challenge. Here, a high sustainability cobalt-free P2-Na0.72 Mn0.75 Li0.24 X0.01 O2  (X = Ti/Si) cathode is developed. The outstanding capacity retention and voltage retention after 150 cycles are obtained in half-cells. The finding shows that Ti localizes on the surface while Si diffuses to the bulk of the particles. Thus, Ti can act as a protective layer that alleviates side reactions in carbonate-based electrolyte. Meanwhile, Si can regulate the local electronic structure and suppress oxygen redox activities. Notably, full-cells with hard carbon (≈300-335 W h kg-1 based on the cathode mass) deliver the capacity retention of 83% for P2-Na0.72 Mn0.75 Li0.24 Si0.01 O2  and 66% for P2-Na0.72 Mn0.75 Li0.24 Ti0.01 O2  after 500 cycles; this electrochemical stability is the best compared to other reported cathodes based on oxygen redox at present. The superior cycle performance also stems from the ability to inhibit microcracking and planar gliding within the particles. Altogether, this finding offers a new composition for developing high-performance low-cost cathodes for NIBs and highlights the unique role of Ti/Si ions.

Hidden Subsurface Reconstruction and Its Atomic Origins in Layered Oxide Cathodes.

Structural transformations near surfaces of solid-state materials underpin functional mechanisms of a broad range of applications including catalysis, memory, and energy storage. It has been a long-standing notion that the outermost free surfaces, accompanied by broken translational symmetry and altered atomic configurations, are usually the birthplace for structural transformations. Here, in a layered oxide cathode for Li-ion batteries, we for the first time observe the incipient state of the well-documented layered-to-spinel-like structural transformation, which is surprisingly initiated from the subsurface layer, rather than the very surface. Coupling atomic level scanning transmission electron microscopy imaging with electron energy loss spectroscopy, we discover that the reconstructed subsurfaces, featuring a mix of discrete patches of layered and spinel-like structures, are associated with selective atomic species partition and consequent nanoscale nonuniform composition gradient distribution at the subsurface. Our findings provide fundamental insights on atomic-scale mechanisms of structural transformation in layered cathodes.

Revealing Grain-Boundary-Induced Degradation Mechanisms in Li-Rich Cathode Materials.

Despite their high energy densities, Li- and Mn-rich, layered-layered, xLi2MnO3·(1 - x)LiTMO2 (TM = Ni, Mn, Co) (LMR-NMC) cathodes require further development in order to overcome issues related to bulk and surface instabilities such as Mn dissolution, impedance rise, and voltage fade. One promising strategy to modify LMR-NMC properties has been the incorporation of spinel-type, local domains to create "layered-layered-spinel" cathodes. However, precise control of local structure and composition, as well as subsequent characterization of such materials, is challenging and elucidating structure-property relationships is not trivial. Therefore, detailed studies of atomic structures within these materials are still critical to their development. Herein, aberration corrected-scanning transmission electron microscopy (AC-STEM) is utilized to study atomic structures, prior to and subsequent to electrochemical cycling, of LMR-NMC materials having integrated spinel-type components. The results demonstrate that strained grain boundaries with various atomic configurations, including spinel-type structures, can exist. These high energy boundaries appear to induce cracking and promote dissolution of Mn by increasing the contact surface area to electrolyte as well as migration of Ni during cycling, thereby accelerating performance degradation. These results present insights into the important role that local structures can play in the macroscopic degradation of the cathode structures and reiterate the complexity of how synthesis and composition affect structure-electrochemical property relationships of advanced cathode designs.

Insights into Layered Oxide Cathodes for Rechargeable Batteries.

Layered intercalation compounds are the dominant cathode materials for rechargeable Li-ion batteries. In this article we summarize in a pedagogical way our work in understanding how the structure's topology, electronic structure, and chemistry interact to determine its electrochemical performance. We discuss how alkali-alkali interactions within the Li layer influence the voltage profile, the role of the transition metal electronic structure in dictating O3-structural stability, and the mechanism for alkali diffusion. We then briefly delve into emerging, next-generation Li-ion cathodes that move beyond layered intercalation hosts by discussing disordered rocksalt Li-excess structures, a class of materials which may be essential in circumventing impending resource limitations in our era of clean energy technology.

Ultralow Volume Change of P2-Type Layered Oxide Cathode for Na-Ion Batteries with Controlled Phase Transition by Regulating Distribution of Na.

Most P2-type layered oxides exhibit a large volume change when they are charged into high voltage, and it further leads to bad structural stability. In fact, high voltage is not the reason which causes the irreversible phase transition. There are two internal factors which affect structural evolution: the amount and distribution of Na ions retained in the lattice. Hereon, a series of layered oxides Na2/3 Mnx Nix-1/3 Co4/3-2x O2 (1/3≤x≤2/3) were synthesized. It is observed that different components have different structural evolutions during the charge/discharge processes, and further researches find that the distribution of Na ions in layers is the main factor. By controlling the distribution of Na ions, the phase transition process can be well controlled. As the referential component, P2-Na2/3 Mn1/2 Ni1/6 Co1/3 O2 cathode with uniform distribution of Na ions is cycled at the voltage window of 1.5-4.5 V, which exhibits a volume change as low as 1.9 %. Such a low strain is beneficial for cycling stability. The current work provides a new and effective route to regulate the structural evolution of the promising P2-type layered cathode for sodium ion batteries.

High Entropy-Induced Kinetics Improvement and Phase Transition Suppression in K-Ion Battery Layered Cathodes.

Layered oxides are widely accepted to be promising cathode candidate materials for K-ion batteries (KIBs) in terms of their rich raw materials and low price, while their further applications are restricted by sluggish kinetics and poor structural stability. Here, the high-entropy design concept is introduced into layered KIB cathodes to address the above issues, and an example of high-entropy layered K0.45Mn0.60Ni0.075Fe0.075Co0.075Ti0.10Cu0.05Mg0.025O2 (HE-KMO) is successfully prepared. Benefiting from the high-entropy oxide with multielement doping, the developed HE-KMO exhibits half-metallic oxide features with a narrow bandgap of 0.19 eV. Increased entropy can also reduce the surface energy of the {010} active facets, resulting in about 2.6 times more exposure of the {010} active facets of HE-KMO than the low-entropy K0.45MnO2 (KMO). Both can effectively improve the kinetics in terms of electron conduction and K+ diffusion. Furthermore, high entropy can inhibit space charge ordering during K+ (de)insertion, and the transition metal-oxygen covalent interaction of HE-KMO is also enhanced, leading to suppressed phase transition of HE-KMO in 1.5-4.2 V and better electrochemical stability of HE-KMO (average capacity drop of 0.20%, 200 cycles) than the low-entropy KMO (average capacity drop of 0.41%, 200 cycles) in the wide voltage window.

K-Rich Spinel Interface of Air-Stable Layered Oxide Cathodes for Potassium-Ion Batteries.

Potassium-containing transition metal layered oxides (KxTmO2), although possessing high energy density and suitable operating voltage, suffer from severe hygroscopic properties due to their two dimensional (2D) layered structure. Their air sensitivity compromises structural stability during prolonged air exposure, therefore increasing the cost. The common sense for designing air-stable layered cathode materials is to avoid contact with H2O molecules. In this study, it is surprisingly found that P3-type KxTmO2 forms an ultra-thin, potassium-rich spinel phase wrapping layer after simply water immersion, remarkedly reduces the reaction activity of the material's surface with air. Combined with Density Function Theory (DFT) calculations, this spinel phase is found to be able to effectively withstand air deterioration and preserving the crystal structure. Consequently, the water-treated material, when exposed to air, can largely maintain its good electrochemical performance, with capacity retention up to 99.15% compared to the fresh samples. Such an in situ surface phase transformation mechanism is also corroborated in other KxTmO2, underscoring its effectiveness in enhancing the air stability of P3-type layered oxides for K+ storage.

Reviving Fatigue Surface for Solid-State Upcycling of Highly Degraded Polycrystalline LiNi1-x-yCoxMnyO2 Cathodes.

The ongoing tide of spent lithium-ion batteries (LIBs) urgently calls for high-value output in efficient recycling. Recently, direct regeneration has emerged as a novel recycling strategy but fails to repair the irreversible morphology and structure damage of the highly degraded polycrystalline layered oxide materials. Here, this work carries out a solid-state upcycling study for the severely cracked LiNi1-x-yCoxMnyO2 cathodes. The specific single-crystallization process during calcination is investigated and the surface rock salt phase is recognized as the intrinsic obstacle to the crystal growth of the degraded cathodes due to sluggish diffusion in the heterogeneous grain boundary. Accordingly, this work revives the fatigue rock salt phase by restoring a layered surface and successfully reshapes severely broken cathodes into the high-performance single-crystalline particles. Benefiting from morphological and structural integrity, the upcycled single-crystalline cathode materials exhibit an enhanced capacity retention rate of 93.5% after 150 cycles at 1C compared with 61.7% of the regenerated polycrystalline materials. The performance is also beyond that of the commercial cathodes even under a high cut-off voltage (4.5 V) or high operating temperature (45 °C). This work provides scientific insights for the upcycling of the highly degraded cathodes in spent LIBs.

Architecting O3/P2 layered oxides by gradient Mn doping for sodium-ion batteries.

O3 phase layered oxides are highly attractive cathode materials for sodium-ion batteries because of their high capacity and decent initial Coulombic efficiency. However, their rate capability and long cycling life are unsatisfactory due to the narrow Na+ transfer channel and irreversible phase transitions of O3 phase during sodiation/desodiation process. Constructing O3/P2 multiphase structures has been proven to be an effective strategy to overcome these challenges. In this study, we synthesized bi-phasic structured O3/P2 Na(Ni2/9Fe1/3Cu1/9Mn1/3)1-xMnxO2 (x = 0.01, 0.02, 0.03, 0.04, 0.05) materials through Mn doping during sodiation process. Benefiting from surface P2 phase layer with the enhanced Na+ transfer dynamics and high structural stability, the Na(Ni2/9Fe1/3Cu1/9Mn1/3)0.98Mn0.02O2 (NFCM-M2) cathode delivers a reversible capacity of 139.1 mA h g-1 at 0.1 C, and retains 71.4 % of its original capacity after 300 cycles at 1 C. Our work provides useful guidance for designing multiphase cathodes and offers new insights into the structure-performance correlation for sodium-ion cathode materials.

Facilitating Layered Oxide Cathodes Based on Orbital Hybridization for Sodium-Ion Batteries: Marvelous Air Stability, Controllable High Voltage, and Anion Redox Chemistry.

Layered oxides have become the research focus of cathode materials for sodium-ion batteries (SIBs) due to the low cost, simple synthesis process, and high specific capacity. However, the poor air stability, unstable phase structure under high voltage, and slow anionic redox kinetics hinder their commercial application. In recent years, the concept of manipulating orbital hybridization has been proposed to simultaneously regulate the microelectronic structure and modify the surface chemistry environment intrinsically. In this review, the hybridization modes between atoms in 3d/4d transition metal (TM) orbitals and O 2p orbitals near the region of the Fermi energy level (EF) are summarized based on orbital hybridization theory and first-principles calculations as well as various sophisticated characterizations. Furthermore, the underlying mechanisms are explored from macro-scale to micro-scale, including enhancing air stability, modulating high working voltage, and stabilizing anionic redox chemistry. Meanwhile, the origin, formation conditions, and different types of orbital hybridization, as well as its application in layered oxide cathodes are presented, which provide insights into the design and preparation of cathode materials. Ultimately, the main challenges in the development of orbital hybridization and its potential for the production application are also discussed, pointing out the route for high-performance practical sodium layered oxide cathodes.

Effect of Electrochemical Pre-Lithiation on Layered Oxide Cathodes for Anode-Free Lithium-metal Batteries.

Due to high energy density and lower manufacturing cost, anode-free lithium-metal batteries (AFLMBs) are attracting increasing attention. The challenges for developing them lie in inferior Coulombic efficiency and short cycle life due to the highly reactive lithium metal. Herein, an electrochemical pre-lithiation strategy is applied to layered oxide cathodes, specifically LiNiO2 and LiCoO2 , aiming to provide an additional lithium source and understand the effect on the cathode structure for AFLMBs. The mechanism for accommodating the excess Li depends on the structural stability of the cathodes where LiNiO2 forms lithiated Li2 NiO2 with the excess lithium in the crystalline lattice while the excess lithium in LiCoO2 forms a Li2 O phase. More importantly, an optimal amount of Li excess is necessary to maintain decent cycle stability and specific capacity in AFLMB, with 40% excess Li for LiNiO2 and 150% for LiCoO2 . While the pre-lithiation process causes particle pulverization depending on the amount of Li excess, LiCoO2 offers a much better cycle performance than LiNiO2 with a promising capacity retention of 80% after 300 cycles in AFLMB (vs 76% after 100 cycles for 40% Li excess in LiNiO2 ). This study provides a promising avenue for developing tailor-made layered oxide cathodes for AFLMBs.

Greener, Safer and Better Performing Aqueous Binder for Positive Electrode Manufacturing of Sodium Ion Batteries.

P2-type cobalt-free MnNi-based layered oxides are promising cathode materials for sodium-ion batteries (SIBs) due to their high reversible capacity and well chemical stability. However, the phase transformations during repeated (dis)charge steps lead to rapid capacity decay and deteriorated Na+ diffusion kinetics. Moreover, the electrode manufacturing based on polyvinylidene difluoride (PVDF) binder system has been reported with severely defluorination issue as well as the energy intensive and expensive process due to the use of toxic and volatile N-methyl-2-pyrrolidone (NMP) solvent. It calls for designing a sustainable, better performing, and cost-effective binder for positive electrode manufacturing. In this work, we investigated inorganic sodium metasilicate (SMS) as a viable binder in conjunction with P2-Na0.67Mn0.55Ni0.25Fe0.1Ti0.1O2 (NMNFT) cathode material for SIBs. The NMNFT-SMS electrode delivered a superior electrochemical performance compared to carboxy methylcellulose (CMC) and PVDF based electrodes with a reversible capacity of ~161 mAh/g and retaining ~83 % after 200 cycles. Lower cell impedance and faster Na+ diffusion was also observed in this binder system. Meanwhile, with the assistance of TEM technique, SMS is suggested to form a uniform and stable nanoscale layer over the cathode particle surface, protecting the particle from exfoliation/cracking due to electrolyte attack. It effectively maintained the electrode connectivity and suppressed early phase transitions during cycling as confirmed by operando XRD study. With these findings, SMS binder can be proposed as a powerful multifunctional binder to enable positive electrode manufacturing of SIBs and to overall reduce battery manufacturing costs.