Sum rule comparison of narrowband and broadband sum frequency generation spectra and comparison with theory.

Earlier sum frequency generation (SFG) experiments involve one infrared and one visible laser, and a measurement of the intensity of the response, yielding data on the surface sensitive properties of the sample. Recently, both the real and imaginary components of the susceptibility were measured in two different sets of experiments. In one set, a broadband infrared laser was used, permitting observations at very short times, while in another set the infrared laser was narrowband, permitting higher spectral resolution. The differences in the spectrum obtained by the two will be most evident in studying narrow absorption bands, e.g., the band due to dangling OH bonds at a water interface. The direct comparisons in the integrated amplitude (sum rule) of the imaginary part of the dangling OH bond region differ by a factor of 3. Due to variations in experimental setup and data processing, corrections were made for the quartz reference, Fresnel factors, and the incident visible laser wavelength. After the corrections, the agreement differs now by the factors of 1.1 within broadband and narrowband groups and the two groups now differ by a factor of 1.5. The 1.5 factor may arise from the extra heating of the more powerful broadband laser system on the water surface. The convolution from the narrowband SFG spectrum to the broadband SFG spectrum is also investigated and it does not affect the sum rule. Theory and narrowband experiments are compared using the sum rule and agree to a factor of 1.3 with no adjustable parameters.

Organic Nucleation: Water Rearrangement Reveals the Pathway of Ibuprofen.

The organic nucleation of the pharmaceutical ibuprofen is investigated, as triggered by the protonation of ibuprofen sodium salt at elevated pH. The growth and aggregation of nanoscale solution species by Analytical Ultracentrifugation and Molecular Dynamics (MD) simulations is tracked. Both approaches reveal solvated molecules, oligomers, and prenucleation clusters, their size as well as their hydration at different reaction stages. By combining surface-specific vibrational spectroscopy and MD simulations, water interacting with ibuprofen at the air-water interface during nucleation is probed. The results show the structure of water changes upon ibuprofen protonation in response to the charge neutralization. Remarkably, the water structure continues to evolve despite the saturation of protonated ibuprofen at the hydrophobic interface. This further water rearrangement is associated with the formation of larger aggregates of ibuprofen molecules at a late prenucleation stage. The nucleation of ibuprofen involves ibuprofen protonation and their hydrophobic assembly. The results highlight that these processes are accompanied by substantial water reorganization. The critical role of water is possibly relevant for organic nucleation in aqueous environments in general.

Spontaneous Appearance of Triiodide Covering the Topmost Layer of the Iodide Solution Interface Without Photo-Oxidation.

Ions containing iodine atoms at the vapor-aqueous solution interfaces critically affect aerosol growth and atmospheric chemistry due to their complex chemical nature and multivalency. While the surface propensity of iodide ions has been intensely discussed in the context of the Hofmeister series, the stability of various ions containing iodine atoms at the vapor-water interface has been debated. Here, we combine surface-specific sum-frequency generation (SFG) vibrational spectroscopy with ab initio molecular dynamics simulations to examine the extent to which iodide ions cover the aqueous surface. The SFG probe of the free O-D stretch mode of heavy water indicates that the free O-D group density decreases drastically at the interface when the bulk NaI concentration exceeds ∼2 M. The decrease in the free O-D group density is attributed to the spontaneous appearance of triiodide that covers the topmost interface rather than to the surface adsorption of iodide. This finding demonstrates that iodide is not surface-active, yet the highly surface-active triiodide is generated spontaneously at the water-air interface, even under dark and oxygen-free conditions. Our study provides an important first step toward clarifying iodine chemistry and pathways for aerosol formation.

Two-dimensional electronic-vibrational sum frequency spectroscopy for interactions of electronic and nuclear motions at interfaces.

Interactions of electronic and vibrational degrees of freedom are essential for understanding excited-states relaxation pathways of molecular systems at interfaces and surfaces. Here, we present the development of interface-specific two-dimensional electronic-vibrational sum frequency generation (2D-EVSFG) spectroscopy for electronic-vibrational couplings for excited states at interfaces and surfaces. We demonstrate this 2D-EVSFG technique by investigating photoexcited interface-active (E)-4-((4-(dihexylamino) phenyl)diazinyl)-1-methylpyridin-1- lum (AP3) molecules at the air-water interface as an example. Our 2D-EVSFG experiments show strong vibronic couplings of interfacial AP3 molecules upon photoexcitation and subsequent relaxation of a locally excited (LE) state. Time-dependent 2D-EVSFG experiments indicate that the relaxation of the LE state, S2, is strongly coupled with two high-frequency modes of 1,529.1 and 1,568.1 cm-1 Quantum chemistry calculations further verify that the strong vibronic couplings of the two vibrations promote the transition from the S2 state to the lower excited state S1 We believe that this development of 2D-EVSFG opens up an avenue of understanding excited-state dynamics related to interfaces and surfaces.

Ultrafast Surface-Specific Spectroscopy of Water at a Photoexcited TiO2 Model Water-Splitting Photocatalyst.

A critical step in photocatalytic water dissociation is the hole-mediated oxidation reaction. Molecular-level insights into the mechanism of this complex reaction under realistic conditions with high temporal resolution are highly desirable. Here, we use femtosecond time-resolved, surface-specific vibrational sum frequency generation spectroscopy to study the photo-induced reaction directly at the interface of the photocatalyst TiO2 in contact with liquid water at room temperature. Thanks to the inherent surface specificity of the spectroscopic method, we can follow the reaction of solely the interfacial water molecules directly at the interface at timescales on which the reaction takes place. Following the generation of holes at the surface immediately after photoexcitation of the catalyst with UV light, water dissociation occurs on a sub-20 ps timescale. The reaction mechanism is similar at pH 3 and 11. In both cases, we observe the conversion of H2 O into Ti-OH groups and the deprotonation of pre-existing Ti-OH groups. This study provides unique experimental insights into the early steps of the photo-induced dissociation processes at the photocatalyst-water interface, relevant to the design of improved photocatalysts.

Charge Transfer Dynamics in Organic-Inorganic Hybrid Heterostructures-Insights by Vibrational-Sum Frequency Generation Spectroscopy.

Organic-inorganic heterostructures play a pivotal role in modern electronic and optoelectronic applications including photodetectors and field effect transistors, as well as in solar energy conversion such as photoelectrodes of dye-sensitized solar cells, photoelectrochemical cells, and in organic photovoltaics. To a large extent, performance of such devices is controlled by charge transfer dynamics at and across (inner) interfaces, e.g., between a wide band gap semiconductor and molecular sensitizers and/or catalysts. Hence, a detailed understanding of the structure-dynamics-function relationship of such functional interfaces is necessary to rationalize possible performance limitations of these materials and devices on a molecular level. Vibrational sum-frequency generation (VSFG) spectroscopy, as an interface-sensitive spectroscopic technique, allows to obtain chemically specific information from interfaces and combines such chemical insights with ultrafast time resolution, when integrated as a spectroscopic probe into a pump-probe scheme. Thus, this minireview discusses the advantages and potential of VSFG spectroscopy for investigating interfacial charge transfer dynamics and structural changes at inner interfaces. A critical perspective of the unique spectroscopic view of otherwise inaccessible interfaces is presented, which we hope opens new opportunities for an improved understanding of function-determining processes in complex materials, and brings together communities who are devoted to designing materials and devices with spectroscopists.

Ultrafast Formation of Charge Transfer Trions at Molecular-Functionalized 2D MoS2 Interfaces.

In this work, we investigate trion dynamics occurring at the heterojunction between organometallic molecules and a monolayer transition metal dichalcogenide (TMD) with transient electronic sum frequency generation (tr-ESFG) spectroscopy. By pumping at 2.4 eV with laser pulses, we have observed an ultrafast hole transfer, succeeded by the emergence of charge-transfer trions. This observation is facilitated by the cancellation of ground state bleach and stimulated emission signals due to their opposite phases, making tr-ESFG especially sensitive to the trion formation dynamics. The presence of charge-transfer trion at molecular functionalized TMD monolayers suggests the potential for engineering the local electronic structures and dynamics of specific locations on TMDs and offers a potential for transferring unique electronic attributes of TMD to the molecular layers.

Stacking Arrangement and Orientation of Aromatic Cations Tune Bandgap and Charge Transport of 2D Organic-Inorganic Hybrid Perovskites.

Chemical modifications on aromatic spacers of 2D perovskites have been demonstrated to be an effective strategy to simultaneously improve optoelectronic properties and stability. However, its underlying mechanism is poorly understood. By using 2D phenyl-based perovskites ([C6 H5 (CH2 )m NH3 ]2 PbI4 ) as models, the authors have revealed how the chemical nature of aromatic cations tunes the bandgap and charge transport of 2D perovskites by utilizing sum-frequency generation vibrational spectroscopy to determine the stacking arrangement and orientation of aromatic cations. It is found that the antiparallel slip-stack arrangement of phenyl rings between adjacent layers induces an indirect band gap, resulting in anomalous carrier dynamics. Incorporation of the CH2 moiety causes stacking rearrangement of the phenyl ring and thus promotes an indirect to direct bandgap transition. In direct-bandgap perovskites, higher carrier mobility correlates with a larger orientation angle of the phenyl ring. Further optimizing the orientation angle by introducing a para-substituted element in a phenyl ring, higher carrier mobility is obtained. This work highlights the importance of leveraging stacking arrangement and orientation of the aromatic cations to tune the photophysical properties, which opens up an avenue for advancing high-performance 2D perovskites optoelectronics via molecular engineering.

Thermoresponse of Odd-Even Effect in n-Alkanethiolate Self-Assembled Monolayers on Gold Substrates.

This study examines thermoresponse of odd-even effect in self-assembled monolayers (SAMs) of n-alkanethiolates (SCn , n=3-18) formed on template-stripped gold (AuTS ) using macro- and microscopic analytical techniques, contact angle goniometry (CAG) and vibrational sum frequency generation (VSFG) spectroscopy, respectively. Both CAG and VSFG analyses showed that the odd-even effect in liquid-like SAMs (n=3-9) disappeared upon heating at 50-70 °C, indicating that the heating led to increased structural disorder regardless of odd and even carbon numbers. In contrast, the opposite thermoresponse was observed for odd and even SCn molecules in wax- and solid-like SAMs (n=10-18). Namely, temperature-dependent orientational change of terminal CH3 relative to the surface normal was opposite for the odd and even molecules, thereby leading to mitigated odd-even effect. Our work offers important insights into thermoresponse of supramolecular structure in condensed organic matter.

Sum frequency generation, calculation of absolute intensities, comparison with experiments, and two-field relaxation-based derivation.

The experimental sum frequency generation (SFG) spectrum is the response to an infrared pulse and a visible pulse and is a highly surface-sensitive technique. We treat the surface dangling OH bonds at the air/water interface and focus on the absolute SFG intensities for the resonant terms, a focus that permits insight into the consequences of some approximations. For the polarization combinations, the calculated linewidths for the water interface dangling OH SFG band at 3,700 [Formula: see text] are, as usual, too large, because of the customary neglect of motional narrowing. The integrated spectrum is used to circumvent this problem and justified here using a Kubo-like formalism and theoretical integrated band intensities rather than peak intensities. Only relative SFG intensities are usually reported. The absolute integrated SFG intensities for three polarization combinations for sum frequency, visible, and infrared beams are computed. We use molecular dynamics and the dipole and the polarizability matrix elements obtained from infrared and Raman studies of [Formula: see text]O vapor. The theoretical expressions for two of the absolute susceptibilities contain only a single term and agree with experiment to about a factor of 1.3, with no adjustable parameters. The Fresnel factors are included in that comparison. One of the susceptibilities contains instead four positive and negative terms and agrees less well. The expression for the SFG correlation function is normally derived from a statistical mechanical formulation using a time-evolving density matrix. We show how a derivation based on a two-field relaxation leads to the same final result.

Spatially dependent H-bond dynamics at interfaces of water/biomimetic self-assembled lattice materials.

Understanding hydrogen-bond interactions in self-assembled lattice materials is crucial for preparing such materials, but the role of hydrogen bonds (H bonds) remains unclear. To gain insight into H-bond interactions at the materials' intrinsic spatial scale, we investigated ultrafast H-bond dynamics between water and biomimetic self-assembled lattice materials (composed of sodium dodecyl sulfate and ß-cyclodextrin) in a spatially resolved manner. To accomplish this, we developed an infrared pump, vibrational sum-frequency generation (VSFG) probe hyperspectral microscope. With this hyperspectral imaging method, we were able to observe that the primary and secondary OH groups of ß-cyclodextrin exhibit markedly different dynamics, suggesting distinct H-bond environments, despite being separated by only a few angstroms. We also observed another ultrafast dynamic reflecting a weakening and restoring of H bonds between bound water and the secondary OH of ß-cyclodextrin, which exhibited spatial uniformity within self-assembled domains, but heterogeneity between domains. The restoration dynamics further suggest heterogeneous hydration among the self-assembly domains. The ultrafast nature and meso- and microscopic ordering of H-bond dynamics could contribute to the flexibility and crystallinity of the material--two critically important factors for crystalline lattice self-assemblies--shedding light on engineering intermolecular interactions for self-assembled lattice materials.

Sum-Frequency Generation in High-Q GaP Metasurfaces Driven by Leaky-Wave Guided Modes.

Resonant metasurfaces provide a unique platform for enhancing multiwave nonlinear interactions. However, the difficulties over mode matching and material transparency place significant challenges in the enhancement of these multiwave processes. Here we demonstrate efficient nonlinear sum-frequency generation (SFG) in multiresonant GaP metasurfaces based on guided-wave bound-state in the continuum resonances. The excitation of the metasurface by two near-infrared input beams generates strong SFG in the visible spectrum with a conversion efficiency of 2.5 × 10-4 W-1, 2 orders of magnitude higher than the one reported in Mie-type resonant metasurfaces. In addition, we demonstrate the nontrivial polarization dependence on the SFG process. In contrast to harmonic generation, the SFG process is enhanced when using nonparallel polarized input-beams. Importantly, by varying the input pump beam polarization it is possible to direct the SFG emission to different diffraction orders, thereby opening up new opportunities for nonlinear light sources and infrared to visible light conversion.

Photoactive Yellow Protein Adsorption at Hydrated Polyethyleneimine and Poly-l-Glutamic Acid Interfaces.

Chiral and achiral vibrational sum-frequency generation (VSFG) spectroscopy was performed in the 1400-1700 and 2800-3800 cm-1 range to study the interfacial structure of photoactive yellow protein (PYP) adsorbed on polyethyleneimine (PEI) and poly-l-glutamic acid (PGA) surfaces. Nanometer-thick polyelectrolyte layers served as the substrate for PYP adsorption, with 6.5-pair layers providing the most homogeneous surfaces. When the topmost material was PGA, it acquired a random coil structure with a small number of ß2-fibrils. Upon adsorption on oppositely charged surfaces, PYP yielded similar achiral spectra. However, the VSFG signal intensity increased for PGA surfaces with a concomitant redshift of the chiral Cα-H and N-H stretching bands, suggesting increased adsorption for PGA compared to PEI. At low wavenumbers, both the backbone and the side chains of PYP induced drastic changes to all measured chiral and achiral VSFG spectra. Decreasing ambient humidity led to the loss of tertiary structure with a re-orientation of α-helixes, evidenced by a strongly blue-shifted chiral amide I band of the ß-sheet structure with a shoulder at 1654 cm-1. Our observations indicate that chiral VSFG spectroscopy is not only capable of determining the main type of secondary structure of PYP, i.e., ß-scaffold, but is also sensitive to tertiary protein structure.

Direct Probe of Electrochemical Pseudocapacitive pH Jump at a Graphene Electrode.

Molecular-level insight into interfacial water at a buried electrode interface is essential in electrochemistry, but spectroscopic probing of the interface remains challenging. Here, using surface-specific heterodyne-detected sum-frequency generation (HD-SFG) spectroscopy, we directly access the interfacial water in contact with the graphene electrode supported on calcium fluoride (CaF2 ). We find phase transition-like variations of the HD-SFG spectra vs. applied potentials, which arises not from the charging/discharging of graphene but from the charging/discharging of the CaF2 substrate through the pseudocapacitive process. The potential-dependent spectra are nearly identical to the pH-dependent spectra, evidencing that the pseudocapacitive behavior is associated with a substantial local pH change induced by water dissociation between the CaF2 and graphene. Our work evidences the local molecular-level effects of pseudocapacitive charging at an electrode/aqueous electrolyte interface.

Polarization-Dependent Sum-Frequency-Generation Spectroscopy for In Situ Tracking of Nanoparticle Morphology.

The surface structure of oxide-supported metal nanoparticles can be determined via characteristic vibrations of adsorbed probe molecules such as CO. Usually, spectroscopic studies focus on peak position and intensity, which are related to binding geometries and number of adsorption sites, respectively. Employing two differently prepared model catalysts, it is demonstrated that polarization-dependent sum-frequency-generation (SFG) spectroscopy reveals the average surface structure and shape of the nanoparticles. SFG results for different particle sizes and morphologies are compared to direct real-space structure analysis by TEM and STM. The described feature of SFG could be used to monitor particle restructuring in situ and may be a valuable tool for operando catalysis.

Boosting Charge Transport in a 2D/3D Perovskite Heterostructure by Selecting an Ordered 2D Perovskite as the Passivator.

We demonstrate that an ordered 2D perovskite can significantly boost the photoelectric performance of 2D/3D perovskite heterostructures. Using selective fluorination of phenyl-ethyl ammonium (PEA) lead iodide to passivate 3D FA0.8 Cs0.2 PbI3 , we find that the 2D/3D perovskite heterostructures passivated by a higher ordered 2D perovskite have lower Urbach energy, yielding a remarkable increase in photoluminescence (PL) intensity, PL lifetime, charge-carrier mobilities (ϕµ), and carrier diffusion length (LD ) for a certain 2D perovskite content. High performance with an ultralong PL lifetime of ≈1.3 µs, high ϕµ of ≈18.56 cm2  V-1 s-1 , and long LD of ≈7.85 µm is achieved in the 2D/3D films when passivated by 16.67 % para-fluoro-PEA2 PbI4 . This carrier diffusion length is comparable to that of some perovskite single crystals (>5 µm). These findings provide key missing information on how the organic cations of 2D perovskites influence the performance of 2D/3D perovskite heterostructures.

A Happy Get-Together - Probing Electrochemical Interfaces by Non-Linear Vibrational Spectroscopy.

Electrochemical interfaces are key structures in energy storage and catalysis. Hence, a molecular understanding of the active sites at these interfaces, their solvation, the structure of adsorbates, and the formation of solid-electrolyte interfaces are crucial for an in-depth mechanistic understanding of their function. Vibrational sum-frequency generation (VSFG) spectroscopy has emerged as an operando spectroscopic technique to monitor complex electrochemical interfaces due to its intrinsic interface sensitivity and chemical specificity. Thus, this review discusses the happy get-together between VSFG spectroscopy and electrochemical interfaces. Methodological approaches for answering core issues associated with the behavior of adsorbates on electrodes, the structure of solvent adlayers, the transient formation of reaction intermediates, and the emergence of solid electrolyte interphase in battery research are assessed to provide a critical inventory of highly promising avenues to bring optical spectroscopy to use in modern material research in energy conversion and storage.

Vibrational Sum-Frequency Generation Hyperspectral Microscopy for Molecular Self-Assembled Systems.

In this review, we discuss the recent developments and applications of vibrational sum-frequency generation (VSFG) microscopy. This hyperspectral imaging technique can resolve systems without inversion symmetry, such as surfaces, interfaces and noncentrosymmetric self-assembled materials, in the spatial, temporal, and spectral domains. We discuss two common VSFG microscopy geometries: wide-field and confocal point-scanning. We then introduce the principle of VSFG and the relationships between hyperspectral imaging with traditional spectroscopy, microscopy, and time-resolved measurements. We further highlight crucial applications of VSFG microscopy in self-assembled monolayers, cellulose in plants, collagen fibers, and lattice self-assembled biomimetic materials. In these systems, VSFG microscopy reveals relationships between physical properties that would otherwise be hidden without being spectrally, spatially, and temporally resolved. Lastly, we discuss the recent development of ultrafast transient VSFG microscopy, which can spatially measure the ultrafast vibrational dynamics of self-assembled materials. The review ends with an outlook on the technical challenges of and scientific potential for VSFG microscopy.

Analytical challenges of glycosaminoglycans at biological interfaces.

The analysis of glycosaminoglycans (GAGs) is a challenging task due to their high structural heterogeneity, which results in diverse GAG chains with similar chemical properties. Simultaneously, it is of high importance to understand their role and behavior in biological systems. It has been known for decades now that GAGs can interact with lipid molecules and thus contribute to the onset of atherosclerosis, but their interactions at and with biological interfaces, such as the cell membrane, are yet to be revealed. Here, analytical approaches that could yield important knowledge on the GAG-cell membrane interactions as well as the synthetic and analytical advances that make their study possible are discussed. Due to recent developments in laser technology, we particularly focus on nonlinear spectroscopic methods, especially vibrational sum-frequency generation spectroscopy, which has the potential to unravel the structural complexity of heterogeneous biological interfaces in contact with GAGs, in situ and in real time.

Adaptation and Recovery of a Styrene-Acrylic Acid Copolymer Surface to Water.

Drops sliding down an adaptive surface lead to changes of the dynamic contact angles. Two adaptation processes play a role: 1) the adaptation of the surface upon bringing it into contact to the drop (wetting) and 2) the adaptation of the surface after the drop passed (dewetting). In order to study both processes, the authors investigate samples made from random styrene (PS)/acrylic acid (PAA) copolymers, which are exposed to water. Sum-frequency generation spectroscopy and tilted-plate measurements indicate that during wetting, the PS segments displace from the interface, while PAA segments are enriched. This structural adaptation of the PS/PAA random copolymer to water remains after dewetting. Annealing the adapted polymer induces reorientation of the PS segments to the surface.