Advanced surface passivation for high-sensitivity studies of biomolecular condensates.

Biomolecular condensates are cellular compartments that concentrate biomolecules without an encapsulating membrane. In recent years, significant advances have been made in the understanding of condensates through biochemical reconstitution and microscopic detection of these structures. Quantitative visualization and biochemical assays of biomolecular condensates rely on surface passivation to minimize background and artifacts due to condensate adhesion. However, the challenge of undesired interactions between condensates and glass surfaces, which can alter material properties and impair observational accuracy, remains a critical hurdle. Here, we introduce an efficient, broadly applicable, and simple passivation method employing self-assembly of the surfactant Pluronic F127 (PF127). The method greatly reduces nonspecific binding across a range of condensates systems for both phase-separated droplets and biomolecules in dilute phase. Additionally, by integrating PF127 passivation with the Biotin-NeutrAvidin system, we achieve controlled multipoint attachment of condensates to surfaces. This not only preserves condensate properties but also facilitates long-time fluorescence recovery after photobleaching imaging and high-precision single-molecule analyses. Using this method, we have explored the dynamics of polySIM molecules within polySUMO/polySIM condensates at the single-molecule level. Our observations suggest a potential heterogeneity in the distribution of available polySIM-binding sites within the condensates.

Metal Fluorides Passivate II-VI and III-V Quantum Dots.

Quantum dots (QDs) with metal fluoride surface ligands were prepared via reaction with anhydrous oleylammonium fluoride. Carboxylate terminated II-VI QDs underwent carboxylate for fluoride exchange, while InP QDs underwent photochemical acidolysis yielding oleylamine, PH3, and InF3. The final photoluminescence quantum yield (PLQY) reached 83% for InP and near unity for core-shell QDs. Core-only CdS QDs showed dramatic improvements in PLQY, but only after exposure to air. Following etching, the InP QDs were bound by oleylamine ligands that were characterized by the frequency and breadth of the corresponding ν(N-H) bands in the infrared absorption spectrum. The fluoride content (1.6-9.2 nm-2) was measured by titration with chlorotrimethylsilane and compared with the oleylamine content (2.3-5.1 nm-2) supporting the formation of densely covered surfaces. The influence of metal fluoride adsorption on the air stability of QDs is discussed.

Lifting the Concentration Limit of Mass Photometry by PEG Nanopatterning.

Mass photometry (MP) is a rapidly growing optical technique for label-free mass measurement of single biomolecules in solution. The underlying measurement principle provides numerous advantages over ensemble-based methods but has been limited to low analyte concentrations due to the need to uniquely and accurately quantify the binding of individual molecules to the measurement surface, which results in diffraction-limited spots. Here, we combine nanoparticle lithography with surface PEGylation to substantially lower surface binding, resulting in a 2 orders of magnitude improvement in the upper concentration limit associated with mass photometry. We demonstrate the facile tunability of degree of passivation, enabling measurements at increased analyte concentrations. These advances provide access to protein-protein interactions in the high nanomolar to low micromolar range, substantially expanding the application space of mass photometry.

Designing Surface Passivators Through Intramolecular Potential Manipulation for Efficient and Stable Perovskite Solar Cells.

The conjugation of terminal ammonium salt groups with perovskite surfaces is a frequently employed technique that aims to enhance the overall performance of perovskite materials, encompassing both bulk and surface properties. Particularly, it exhibits heightened efficacy when applied to surface modification, due to its ability to mitigate defect accumulation and facilitate facile binding with the receptive sites inherent to the perovskite structure. However, the interaction of the bulk ammonium group with PbI2 has the potential to form a low-dimensional phase of perovskite, which may obstruct carrier extraction at the interface. Therefore, the surface passivators (MeO-PFACl) are designed through intramolecular potential manipulation. The combinations of the electron-donating methoxy group and π-π conjugation of the phenyl ring reduce the local potential at the reactive site of formamidinium group, making it less likely to form a low-dimension phase with perovskite. This surface passivation strategy effectively suppresses the surface nonradiative recombination and promotes the interface carrier extraction. The devices treated with MeO-PFACl have demonstrated exceptional performance, achieving a peak power conversion efficiency (PCE) of 25.88%, with an average PCE of 25.37%. These works offer a novel principle for enhancing both the efficiency and stability of PSCs using ammonium-incorporated molecules without the induction of an additional phase layer.

Managing Interfacial Defects and Charge-Carriers Dynamics by a Cesium-Doped SnO2 for Air Stable Perovskite Solar Cells.

A high-quality nanostructured tin oxide (SnO2) has garnered massive attention as an electron transport layer (ETL) for efficient perovskite solar cells (PSCs). SnO2 is considered the most effective alternative to titanium oxide (TiO2) as ETL because of its low-temperature processing and promising optical and electrical characteristics. However, some essential modifications are still required to further improve the intrinsic characteristics of SnO2, such as mismatch band alignments, charge extraction, transportation, conductivity, and interfacial recombination losses. Herein, an inorganic-based cesium (Cs) dopant is used to modify the SnO2 ETL and to investigate the impact of Cs-dopant in curing interfacial defects, charge-carrier dynamics, and improving the optoelectronic characteristics of PSCs. The incorporation of Cs contents efficiently improves the perovskite film quality by enhancing the transparency, crystallinity, grain size, and light absorption and reduces the defect states and trap densities, resulting in an improved power conversion efficiency (PCE) of ≈22.1% with Cs:SnO2 ETL, in-contrast to pristine SnO2-based PSCs (20.23%). Moreover, the Cs-modified SnO2-based PSCs exhibit remarkable environmental stability in a relatively higher relative humidity environment (>65%) and without encapsulation. Therefore, this work suggests that Cs-doped SnO2 is a highly favorable electron extraction material for preparing highly efficient and air-stable planar PSCs.

Mitigating Surface Defects in Tin-Based Perovskite Films with α-Tocopherol for Enhanced Photovoltaic Performance.

Surface defects in tin-based perovskite films disrupt the periodic arrangement of atoms in crystals, making surface atoms more susceptible to interactions with water and oxygen molecules in the surrounding environment. The diffusion of oxygen ions into the perovskite interior leads to the formation of severe bulk defects, which compromises the performance of tin-based perovskite solar cells (PSCs). As a result, surface defects are recognized as the primary source of degradation and require special attention. In this study, α-Tocopherol (also known as vitamin E) into tin-based perovskite films is introduced. Experimental results show that because of its larger volume, α-Tocopherol does not enter the perovskite lattice. Instead, it forms van der Waals and hydrogen bond interactions with the formamidine ion (FA+) and the [SnI6]4- octahedron at the perovskite terminals. Through α-Tocopherol passivation, both surface and interior oxidation of the perovskite are significantly suppressed as α-Tocopherol firmly embeds itself on the perovskite surface. Density functional theory analysis confirms the inhibition of I─Sn antisite defects (ISn) and Sn interstitial defects (Sni), which possess deep trap states within the bandgap. Ultimately, it is demonstrated that α-Tocopherol enhances the power conversion efficiency (PCE) from 9.19% to 13.14% and prolongs the lifetime of tin-based PSCs to over 50 days.

Interaction of C60 with Methylammonium Lead Iodide Perovskite Surfaces: Unveiling the Role of C60 in Surface Engineering.

Understanding the interaction between fullerene (C60) and perovskite surfaces is pivotal for advancing the efficiency and stability of perovskite solar cells. In this study, we investigate the adsorption behavior of C60 on methylammonium lead iodide (MAPbI3) surfaces using periodic density functional theory calculations. We explore various surface terminations and defect configurations to elucidate the influence of surface morphology on the C60-perovskite interaction, computing the adsorption energy and transfer of charge. Our results reveal distinct adsorption energies and charge transfer mechanisms for different surface terminations, shedding light on the role of surface defects in modifying the electronic structure and stability of perovskite materials. Furthermore, we provide insights into the potential of C60 to passivate surface defects, playing a relevant role in the surface reconstruction after the formation of defects. This comprehensive understanding of C60-perovskite interactions offers valuable guidelines about the role of fullerenes on surface structure and reconstruction.

Surface passivation and functionalisation for mass photometry.

Interferometric scattering (iSCAT) microscopy enables the label-free observation of biomolecules. Consequently, single-particle imaging and tracking with the iSCAT-based method known as mass photometry (MP) is a growing area of study. However, establishing reliable cover glass passivation and functionalisation methods is crucial to reduce nonspecific binding and prepare surfaces for in vitro single-molecule binding experiments. Existing protocols for fluorescence microscopy can contain strongly scattering or mobile components, which make them impractical for MP-based microscopy. In this study, we characterise several different surface coatings using MP. We present approaches for cover glass passivation using 3-aminopropyltriethoxysilane (APTES) and polyethylene glycol (PEG, 2k) along with functionalisation via a maleimide-thiol linker. These coatings are compatible with water or salt buffers, and show low background scattering; thus, we are able to measure proteins as small as 60 kDa. In this technical note, we offer a surface preparation suitable for in vitro experiments with MP.

Surface Passivation of Carbon Dots for Tunable Biological Performance.

Recent investigations were shifted this trend toward exploring the biomedical applicability of CDs, relevant to chronic diseases. Herein, a systematic approach is demonstrated for studying the effect of variation in the surface passivation of CDs for tuning its optical character and biological performance. Alginate and pectin were successfully clustered oxygen-surface passivated CDs, while, chitin was used to nucleate nitrogen-surface passivated CDs. Pectin-treated with base (4.1 ± 1.8 nm) and chitin-treated acid (3.5 ± 1.7 nm) were ingrained the smallest O-surface passivated CDs and N-surface passivated CDs, respectively. However, N-surface passivated CDs were shown with the highest optical activity. CDs colloids prepared from alginate, pectin & chitin, resulted in reduction of tumor cell viability percentage to be 80.8%, 74.0% & 69.0% respectively. O-surface passivated CDs nucleated from alginate showed the highest anti-proliferative effects. Moreover, O-surface passivated CDs (from alginate) showed the supremacy in inhibition of inflammation, while, increasing of its concentration ten times resulted in significant increment in inhibition percent to be 28% & 42%, using 1 µg/mL & 10 µg/mL, respectively. In summarization, it could be decided that, compared to N-surface passivated CDs (from chitin), O-surface passivated CDs (from alginate) showed excellency in application as a concurrent anti-inflammatory/antitumor drug, to be applied as a potential therapeutical reagent for treatment of inflammation, in production of vaccines, immune-therapeutics, and immune-suppressive drugs.

PVP Passivated δ-CsPbI3: Vacancy Induced Visible-Light Absorption and Efficient Photocatalysis.

The aqueous instability of halide perovskite seriously hinders its direct application in water as a potential photocatalyst. Here, we prepared a new type of polyvinylpyrrolidone (PVP) passivated δ-CsPbI3 (δ-CsPbI3@PVP) microcrystal by a facile method. This material can be uniformly dispersed in water and stably maintain its crystal structure for a long time, breaking through the bottleneck of halide perovskite photocatalysis in water. Under visible light, δ-CsPbI3@PVP can almost completely photodegrade organic dyes (including Rhodamine B, methylene blue, and crystal violet) in only 20 min. The efficient photocatalytic activity is attributed to the enhanced visible light absorption arising from PbI2 defects in δ-CsPbI3@PVP and the intrinsic low photoluminescence quantum yield of δ-CsPbI3, which induces efficient light absorption and photocatalytic activity. We highlight δ-CsPbI3@PVP as an effective aqueous photocatalyst, and this study provides new insights into how to exploit the potential of halide perovskite in photocatalytic applications.

Alkylammonium Halides for Phase Regulation and Luminescence Modulation of Cesium Copper Iodide Nanocrystals for Light-Emitting Diodes.

All-inorganic cesium copper halide nanocrystals have attracted extensive attention due to their cost-effectiveness, low toxicity, and rich luminescence properties. However, controlling the synthesis of these nanocrystals to achieve a precise composition and high luminous efficiency remains a challenge that limits their future application. Herein, we report the effect of oleylammonium iodide on the synthesis of copper halide nanocrystals to control the composition and phase and modulate their photoluminescence (PL) quantum yields (QYs). For CsCu2I3, the PL peak is centered at 560 nm with a PLQY of 47.3%, while the PL peak of Cs3Cu2I5 is located at 440 nm with an unprecedently high PLQY of 95.3%. Furthermore, the intermediate-state CsCu2I3/Cs3Cu2I5 heterostructure shows white light emission with a PLQY of 66.4%, chromaticity coordinates of (0.3176, 0.3306), a high color rendering index (CRI) of 90, and a correlated color temperature (CCT) of 6234 K, indicating that it is promising for single-component white-light-emitting applications. The nanocrystals reported in this study have excellent luminescence properties, low toxicity, and superior stability, so they are more suitable for future light-emitting applications.

Triisocyanate Derived Interlayer and High-Melting-Point Doping Promoter Boost Operational Stability of Perovskite Solar Cells.

Formamidinium lead triiodide serves as the optimal light-absorbing layer in single-junction perovskite solar cells. However, achieving operational stability of high-efficiency n-i-p type devices at elevated temperatures remains challenging. In this work, we implemented effective surface modifications on microcrystalline perovskite films. This involved the nucleophilic addition of formamidinium cations and coordination of residual PbI2 with triphenylmethane triisocyanate as well as subsequent polymerization. The in situ growth of a cross-linking network chemically anchored on the perovskite film in this approach effectively reduced trap densities, favorably altered surface work function, suppressing interface charge recombination and thus enhancing cell efficiency. Coupled with a high-melting-point air-doping promoter, we fabricated n-i-p type perovskite solar cells surpassing 25 % efficiency, demonstrating excellent operational stability at 65 °C.

Surface Molecular Engineering for Fully Textured Perovskite/Silicon Tandem Solar Cells.

Developing large-scale monolithic perovskite/silicon tandem devices based on industrial Czochralski silicon wafers will likely have to adopt double-side textured architecture, given their optical benefits and low manufacturing costs. However, the surface engineering strategies that are widely used in solution-processed perovskites to regulate the interface properties are not directly applicable to micrometric textures. Here, we devise a surface passivation strategy by dynamic spray coating (DSC) fluorinated thiophenethylammonium ligands, combining the advantages of providing conformal coverage and suppressing phase conversion on textured surfaces. From the viewpoint of molecular engineering, theoretical calculation and experimental results demonstrate that introducing trifluoromethyl group provide more effective surface passivation through strong interaction and energy alignment by forming a dipole layer. Consequently, the DSC treatment of this bifunctional molecule enables the tandem cells based on industrial silicon wafers to achieve a certified stabilized power conversion efficiency of 30.89 %. In addition, encapsulated devices display excellent operational stability by retaining over 97 % of their initial performance after 600 h continuous illumination.

Bilateral Chemical Linking at NiOx Buried Interface Enables Efficient and Stable Inverted Perovskite Solar Cells and Modules.

Inverted NiOx-based perovskite solar cells (PSCs) exhibit considerable potential because of their low-temperature processing and outstanding excellent stability, while is challenged by the carriers transfer at buried interface owing to the inherent low carrier mobility and abundant surface defects that directly deteriorates the overall device fill factor. Present work demonstrates a chemical linker with the capability of simultaneously grasping NiOx and perovskite crystals by forming a Ni-S-Pb bridge at buried interface to significantly boost the carriers transfer, based on a rationally selected molecule of 1,3-dimethyl-benzoimidazol-2-thione (NCS). The constructed buried interface not only reduces the pinholes and needle-like residual PbI2 at the buried interface, but also deepens the work function and valence band maximum positions of NiOx, resulting in a smaller VBM offset between NiOx and perovskite film. Consequently, the modulated PSCs achieved a high fill factor up to 86.24 %, which is as far as we know the highest value in records of NiOx-based inverted PSCs. The NCS custom-tailored PSCs and minimodules (active area of 18 cm2) exhibited a champion efficiency of 25.05 % and 21.16 %, respectively. The unencapsulated devices remains over 90 % of their initial efficiency at maximum power point under continuous illumination for 1700 hours.

Ligand-solvent coordination enables comprehensive trap passivation for efficient quantum dot near-infrared light-emitting diodes.

Near-infrared light-emitting diodes (NIR LEDs) based on perovskite quantum dots (QDs) have produced external quantum efficiency (EQE) of ~15%. However, these high-performance NIR-QLEDs suffer from immediate carrier quenching because of the accumulation of migratable ions at the surface of the QDs. These uncoordinated ions and carriers - if not bound to the nanocrystal surface - serve as centers for exciton quenching and device degradation. In this work, we overcome this issue and fabricate high-performance NIR QLEDs by devising a ligand anchoring strategy, which entails dissolving the strong-binding ligand (Guanidine Hydroiodide, GAI) in the mediate-polar solvent. By employing the dye-sensitized device structure (phosphorescent indicator), we demonstrate the elimination of the interface defects. The treated QDs films exhibit an exciton binding energy of 117 meV: this represents a 1.5-fold increase compared to that of the control (74 meV). We report, as a result, the NIR QLEDs with an EQE of 21% which is a record among NIR perovskite QLEDs. These QLEDs also exhibit a 7-fold higher operational stability than that of the best previously reported NIR QLEDs. Furthermore, we demonstrate that the QDs are compatible with large-area QLEDs: we showcase 900 mm2 QLEDs with EQE approaching 20%.

Localized Oxidation Embellishing Strategy Enables High-Performance Perovskite Solar Cells.

Perovskite solar cell (pero-SC) has attracted extensive studies as a promising photovoltaic technology, wherein the electron extraction and transfer exhibit pivotal effect to the device performance. The planar SnO2 electron transport layer (ETL) has contributed the recent record power conversion efficiency (PCE) of the pero-SCs, yet still suffers from surface defects of SnO2 nanoparticles which brings energy loss and phase instability. Herein, we report a localized oxidation embellishing (LOE) strategy by applying (NH4 )2 CrO4 on the SnO2 ETL. The LOE strategy builds up plentiful nano-heterojunctions of p-Cr2 O3 /n-SnO2 and the nano-heterojunctions compensate the surface defects and realize benign energy alignment, which reduces surface non-radiative recombination and voltage loss of the pero-SCs. Meanwhile, the decrease of lattice mismatch released the lattice distortion and eliminated tensile stress, contributing to better stability of the devices. The pero-SCs based on α-FAPbI3 with the SnO2 ETL treated by the LOE strategy realized a PCE of 25.72 % (certified as 25.41 %), along with eminent stability performance of T90 >700 h. This work provides a brand-new view for defect modification of SnO2 electron transport layer.

Sterically Controlled Synthesis of Amine-Free CsPbBr3 Nanoplatelets for Stable, Pure-Blue Light Emission.

Metal halide perovskite nanoplatelets (NPLs) have demonstrated excellent optical properties for light-emitting applications and achieved tunable blue luminescence through thickness control. However, their translation into electronic devices has lagged behind due to poor colloidal and film stability. The main reason for this is the deprotonation of their surface-capped ammonium passivating ligands, resulting in NPL aggregation. Here we report the first facile synthesis of amine-free pure-blue CsPbBr3 NPLs with outstanding thermal and light stability. This is achieved by utilizing an amine-free phosphine oxide route with a surface capping molecule exhibiting large steric hindrance to prevent NPL aggregation. Two-dimensional nuclear magnetic resonance (2D NMR) spectroscopy suggests slower ligand exchange in amine-free NPLs compared to the conventional NPLs, which can be attributed to the strong binding strength of the designated ligand. Consequently, the amine-free NPLs exhibited superior stability against radiation, heat and moisture. We further demonstrate the importance of acid-base equilibrium in this amine-free synthesis route. Through solvent neutralization and passivation with various alkali carbonates, the resulting NPLs attained near-unity photoluminescence quantum yield (PLQY) and pure blue emission.

Ligands in Lead Halide Perovskite Nanocrystals: From Synthesis to Optoelectronic Applications.

Ligands are indispensable for perovskite nanocrystals (NCs) throughout the whole lifetime, as they not only play key roles in the controllable synthesis of NCs with different sizes and shapes, but also act as capping shell that affects optical properties and electrical coupling of NCs. Establishing a systematic understanding of the relationship between ligands and perovskite NCs is significant to enable many potential applications of NCs. This review mainly focuses on the influence of ligands on perovskite NCs. First of all, the ligands-dominated size and shape control of NCs is discussed. Whereafter, the surface defects of NCs and the bonding between ligands and perovskite NCs are classified, and corresponding post-treatment of surface defects via ligands is also summarized. Furthermore, advances in engineering the ligands towards the high performance of optoelectronic devices based on perovskite NCs, including photodetector, solar cell, light emitting diode (LED), and laser, and finally to potential challenges are also discussed.

Collaborative Passivation for Dual Charge Transporting Layers Based on 4-(chloromethyl)benzonitrile Additive toward Efficient and Stable Inverted Perovskite Solar Cells.

Poor carrier transport capacity and numerous surface defects of charge transporting layers (CTLs), coupled with misalignment of energy levels between perovskites and CTLs, impact photoelectric conversion efficiency (PCE) of inverted perovskite solar cells (PSCs) profoundly. Herein, a collaborative passivation strategy is proposed based on 4-(chloromethyl) benzonitrile (CBN) as a solution additive for fabrication of both [6,6]-phenyl-C61-butyric acid methylester (PCBM) and poly(triarylamine) (PTAA) CTLs. This additive can improve wettability of PTAA and reduce the agglomeration of PCBM particles, which enhance the PCE and device stability of the PSCs. As a result, a PCE exceeding 20% with a remarkable short circuit current of 23.9 mA cm-2 , and an improved fill factor of 81% is obtained for the CBN- modified inverted PSCs. Devices maintain 80% and 70% of the initial PCE after storage under 30% and 85% humidity ambient conditions for 1000 h without encapsulation, as well as negligible light state PCE loss. This strategy demonstrates feasibility of the additive engineering to improve interfacial contact between the CTLs and perovskites for fabrication of efficient and stable inverted PSCs.

Performance Enhancement of Lead-Free 2D Tin Halide Perovskite Transistors by Surface Passivation and Its Impact on Non-Volatile Photomemory Characteristics.

Two-dimensional (2D) tin (Sn)-based perovskites have recently received increasing research attention for perovskite transistor application. Although some progress is made, Sn-based perovskites have long suffered from easy oxidation from Sn2+ to Sn4+ , leading to undesirable p-doping and instability. In this study, it is demonstrated that surface passivation by phenethylammonium iodide (PEAI) and 4-fluorophenethylammonium iodide (FPEAI) effectively passivates surface defects in 2D phenethylammonium tin iodide (PEA2 SnI4 ) films, increases the grain size by surface recrystallization, and p-dopes the PEA2 SnI4 film to form a better energy-level alignment with the electrodes and promote charge transport properties. As a result, the passivated devices exhibit better ambient and gate bias stability, improved photo-response, and higher mobility, for example, 2.96 cm2 V-1 s-1 for the FPEAI-passivated films-four times higher than the control film (0.76 cm2 V-1 s-1 ). In addition, these perovskite transistors display non-volatile photomemory characteristics and are used as perovskite-transistor-based memories. Although the reduction of surface defects in perovskite films results in reduced charge retention time due to lower trap density, these passivated devices with better photoresponse and air stability show promise for future photomemory applications.