Artificial Biosystems by Printing Biology.

The continuous progress of printing technologies over the past 20 years has fueled the development of a plethora of applications in materials sciences, flexible electronics, and biotechnologies. More recently, printing methodologies have started up to explore the world of Artificial Biology, offering new paradigms in the direct assembly of Artificial Biosystems (small condensates, compartments, networks, tissues, and organs) by mimicking the result of the evolution of living systems and also by redesigning natural biological systems, taking inspiration from them. This recent progress is reported in terms of a new field here defined as Printing Biology, resulting from the intersection between the field of printing and the bottom up Synthetic Biology. Printing Biology explores new approaches for the reconfigurable assembly of designed life-like or life-inspired structures. This work presents this emerging field, highlighting its main features, i.e., printing methodologies (from 2D to 3D), molecular ink properties, deposition mechanisms, and finally the applications and future challenges. Printing Biology is expected to show a growing impact on the development of biotechnology and life-inspired fabrication.

Comparison of artificial graft versus autograft in anterior cruciate ligament reconstruction: a meta-analysis.

BACKGROUND: Critically evaluation and summarization for the outcomes between autografts and artificial grafts using in anterior cruciate ligament (ACL) reconstruction have not been performed currently. The purpose of this study is to compare the clinical outcomes between artificial ligaments and autografts at a short- to mid-term follow-up. METHODS: A computerized search of the databases was conducted including Medline, Embase, and the Cochrane library. Only prospective or retrospective comparative studies with a minimum 2-year follow-up and a minimum sample size of 15 for each group were considered for inclusion. Two independent reviewers performed data extraction and methodological quality assessment. A Mantel-Haenszel analysis was used for pooling of results. Sensitivity analysis was performed in order to maintain the stability of results. RESULTS: Seven studies were included in this study. The total sample size was 403 (autograft group: 206 patients; synthetic graft group: 197 patients). Four studies were randomized controlled trials. Two studies were retrospective comparative studies and one study was non-randomized prospective comparative study. In terms of instrumented laxity, patient-oriented outcomes and complications, no significant difference was occurred between new artificial ligaments and autografts. But the results of IKDC grades and instrumented laxity were worsen in early artificial ligaments compared to autografts. CONCLUSIONS: The outcomes of new generation of artificial ligaments are similar to autografts at a short- to mid-term follow-up. However, the early artificial ligaments are not suggested for ACL reconstruction compared to autografts.

3D-printed Shepp-Logan phantom as a real-world benchmark for MRI.

PURPOSE: As prescribed and reliable geometrical entities, phantoms have served as indispensable validation tools in a variety of MR-related topics. Though a number of phantoms have been conceived, certain applications may warrant highly customized geometries. The purpose of this study was to demonstrate the expediency of rapid prototyping for generating a flexible class of MR-compatible phantom designs. METHODS: An incarnation of the three-dimensional Shepp-Logan numerical phantom, amended for use in magnetic resonance spectroscopic imaging, was actualized using rapid prototyping. Each of the comprising compartments was filled with a solution containing prepared concentrations of common (1)H brain metabolites. Analytical Fourier expressions for the phantom class were established in order to generate a set of simulated measurements, which were then contrasted with acquired data. RESULTS: Experimental results for both structural and spectroscopic imaging substantiate the suitability of rapid prototyping for MR phantom applications. The analytically simulated measurements show excellent agreement with the measured data, but also highlight the various consequences effectuated when certain aspects of the acquisition model are disregarded or misrepresented. CONCLUSION: Rapid prototyping offers a novel and versatile framework for MR phantom-based validation studies. Furthermore, the growing accessibility and open-source compatibility may provide an important link between the often disparate numerical and haptic testing.

A unified in vitro evaluation for apatite-forming ability of bioactive glasses and their variants.

The aim of this study was to propose and validate a new unified method for testing dissolution rates of bioactive glasses and their variants, and the formation of calcium phosphate layer formation on their surface, which is an indicator of bioactivity. At present, comparison in the literature is difficult as many groups use different testing protocols. An ISO standard covers the use of simulated body fluid on standard shape materials but it does not take into account that bioactive glasses can have very different specific surface areas, as for glass powders. Validation of the proposed modified test was through round robin testing and comparison to the ISO standard where appropriate. The proposed test uses fixed mass per solution volume ratio and agitated solution. The round robin study showed differences in hydroxyapatite nucleation on glasses of different composition and between glasses of the same composition but different particle size. The results were reproducible between research facilities. Researchers should use this method when testing new glasses, or their variants, to enable comparison between the literature in the future.

An anthropomorphic spine phantom for proton beam approval in NCI-funded trials.

As part of the approval process for the use of scattered or uniform scanning proton therapy in National Cancer Institute (NCI)-sponsored clinical trials, the Radiological Physics Center (RPC) mandates irradiation of two RPC anthropomorphic proton phantoms (prostate and spine). The RPC evaluates these irradiations to ensure that they agree with the institutions' treatment plans within criteria of the NCI-funded cooperative study groups. The purpose of this study was to evaluate the use of an anthropomorphic spine phantom for proton matched-field irradiation, and to assess its use as a credentialing tool for proton therapy beams. We used an anthropomorphic spine phantom made of human vertebral bodies embedded in a tissue substitute material called Muscle Substitute/Solid Rigid Number 4 (MS/SR4) comprising three sections: a posterior section containing the posterior surface and the spinous processes, and left and right (L/R) sections containing the vertebral bodies and the transverse processes. After feasibility studies at three institutions, the phantom, containing two thermoluminescent dosimeters (TLDs) for absolute dose measurements and two sheets of radiochromic film for relative dosimetry, was shipped consecutively to eight proton therapy centers participating in the approval study. At each center, the phantom was placed in a supine or prone position (according to the institution's spine treatment protocol) and imaged with computed tomography (CT). The images then were used with the institution's treatment planning system (TPS) to generate two matched fields, and the phantom was irradiated accordingly. The irradiated phantom was shipped to the RPC for analysis, and the measured values were compared with the institution's TPS dose and profiles using criteria of ± 7% for dose agreement and 5 mm for profile distance to agreement. All proton centers passed the dose criterion with a mean agreement of 3% (maximum observed agreement, 7%). One center failed the profile distance-to-agreement criterion on its initial irradiation, but its second irradiation passed the criterion. Another center failed the profile distance-to-agreement criterion, but no repeat irradiation was performed. Thus, seven of the eight institutions passed the film profile distance-to-agreement criterion with a mean agreement of 1.2 mm (maximum observed agreement 5 mm). We conclude that an anthropomorphic spine phantom using TLD and radiochromic film adequately verified dose delivery and field placement for matched-field treatments.

A new approach for an ultrasensitive tactile sensor covering an ultrawide pressure range based on the hierarchical pressure-peak effect.

Flexible tactile sensors that imitate the skin tactile system have attracted extensive research interest due to their potential applications in medical diagnosis, intelligent robots and so on. However, it is still a great challenge to date to fabricate tactile sensors with both high sensitivity and wide detection range due to the difficulties in modulating the resistance variation in the sensing materials in a wide pressure range. Here, a tactile sensor with a novel design based on the hierarchical pressure-peak effect (HPPE) consisting of PVP nanowires and electroless deposition (ELD) silver PDMS micro-pyramids is reported. The HPPE can effectively modulate the resistance change rate by adjusting the change of contact area during compression deformation, and the HPPE tactile sensor was demonstrated to have both ultrahigh sensitivity (11.60-1108.75 kPa-1) and ultrawide pressure range (0.04-600 kPa). The designed HPPE tactile sensor is successfully utilized in detecting multi-level pressures including respiration, finger heart rate, pulse and foot pressures. Moreover, it is used to sense a subtle clamping force in the Leonardo Da Vinci surgical robot demonstrating the potential of the sensor in surgical robot applications. In all these cases, the sensor exhibits enough capability to respond quickly to ultrawide-range pressures with high accuracy and stability.

Performance of neural networks for localizing moving objects with an artificial lateral line.

Fish are able to sense water flow velocities relative to their body with their mechanoreceptive lateral line organ. This organ consists of an array of flow detectors distributed along the fish body. Using the excitation of these individual detectors, fish can determine the location of nearby moving objects. Inspired by this sensory modality, it is shown here how neural networks can be used to extract an object's location from simulated excitation patterns, as can be measured along arrays of stationary artificial flow velocity sensors. The applicability, performance and robustness with respect to input noise of different neural network architectures are compared. When trained and tested under high signal to noise conditions (46 dB), the Extreme Learning Machine architecture performs best with a mean Euclidean error of 0.4% of the maximum depth of the field D, which is taken half the length of the sensor array. Under lower signal to noise conditions Echo State Networks, having recurrent connections, enhance the performance while the Multilayer Perceptron is shown to be the most noise robust architecture. Neural network performance decreased when the source moves close to the sensor array or to the sides of the array. For all considered architectures, increasing the number of detectors per array increased localization performance and robustness.

Experimental optimization of wing shape for a hummingbird-like flapping wing micro air vehicle.

Flapping wing micro air vehicles (MAVs) take inspiration from natural fliers, such as insects and hummingbirds. Existing designs manage to mimic the wing motion of natural fliers to a certain extent; nevertheless, differences will always exist due to completely different building blocks of biological and man-made systems. The same holds true for the design of the wings themselves, as biological and engineering materials differ significantly. This paper presents results of experimental optimization of wing shape of a flexible wing for a hummingbird-sized flapping wing MAV. During the experiments we varied the wing 'slackness' (defined by a camber angle), the wing shape (determined by the aspect and taper ratios) and the surface area. Apart from the generated lift, we also evaluated the overall power efficiency of the flapping wing MAV achieved with the various wing design. The results indicate that especially the camber angle and aspect ratio have a critical impact on the force production and efficiency. The best performance was obtained with a wing of trapezoidal shape with a straight leading edge and an aspect ratio of 9.3, both parameters being very similar to a typical hummingbird wing. Finally, the wing performance was demonstrated by a lift-off of a 17.2 g flapping wing robot.

Stirred, shaken, or stagnant: What goes on at the blood-biomaterial interface.

There is a widely recognized need to improve the performance of vascular implants and external medical devices that come into contact with blood by reducing adverse reactions they cause, such as thrombosis and inflammation. These reactions lead to major adverse cardiovascular events such as heart attacks and strokes. Currently, they are managed therapeutically. This need remains unmet by the biomaterials research community. Recognized stagnation of the blood-biomaterial interface research translates into waning interest from clinicians, funding agencies, and practitioners of adjacent fields. The purpose of this contribution is to stir things up. It follows the 2014 BloodSurf meeting (74th International IUVSTA Workshop on Blood-Biomaterial Interactions), offers reflections on the situation in the field, and a three-pronged strategy integrating different perspectives on the biological mechanisms underlying blood-biomaterial interactions. The success of this strategy depends on reengaging clinicians and on the renewed cooperation of the funding agencies to support long-term efforts.

Nanotechnology and biomimetic methods in therapeutics: molecular scale control with some help from nature.

Nanoscale science and engineering has provided new avenues for engineering materials with macromolecular and even molecular precision. In particular, researchers are beginning to mimic biological systems, achieving molecular scale control via self-assembly and directed assembly techniques. Fabrication and manipulation with macromolecular and molecular precision have led and will lead to the development of novel materials, and these materials will facilitate the fabrication of micro- and nanoscale devices, such as self-regulated micro- and nanoscale drug delivery devices that combine diagnostic and therapeutic actions for instantaneous administration of therapy. As the field of nanoscale science and engineering matures, technologies that will revolutionize the way health care is administered will continue to be developed.

A phantom for quantitative ultrasound of trabecular bone.

The propagation mechanisms of ultrasound in trabecular bone are poorly understood and have been the subject of extended debate; also, the reproducibility of ultrasonic measurements on bone in vivo using commercial ultrasound heel-scanning devices is such that the interpretation of the obtained data is difficult. In this paper we describe recent developments in the production of a bone-mimicking material which is well suited to the task of routine monitoring of commercial ultrasound bone scanners. The material, based on a standard epoxy resin is fabricated to a pre-determined porosity value by the inclusion of a marrow-mimicking material thereby introducing a known and controlled mean pore size. Measurements of the velocity and attenuation of the material have been performed over a range of porosity values from 10% to 80% in the frequency range 500-900 kHz; also, broadband ultrasonic attenuation (BUA) values have been obtained from commercial equipment. The material displays velocities in the range 1844-3118 m s(-1) and attenuation ranging from 7.0 to 17.7 dB cm(-1) at 500 kHz.