ABSTRACT
Disease outbreaks are a major impediment to aquaculture production, and vaccines are integral for disease management. Vaccines can be expensive, vary in effectiveness, and come with adjuvant-induced adverse effects, causing fish welfare issues and negative economic impacts. Three-dimensional biopolymer hydrogels are an appealing new technology for vaccine delivery in aquaculture, with the potential for controlled release of multiple immunomodulators and antigens simultaneously, action as local depots, and tunable surface properties. This research examined the intraperitoneal implantation of a cross-linked TEMPO cellulose nanofiber (TOCNF) hydrogel formulated with a Vibrio anguillarum bacterin in Atlantic salmon with macroscopic and microscopic monitoring to 600-degree days post-implantation. Results demonstrated a modified passive integrated transponder tagging (PITT) device allowed for implantation of the hydrogel. However, the Atlantic salmon implanted with TOCNF hydrogels exhibited a significant foreign body response (FBR) compared to sham-injected negative controls. The FBR was characterized by gross and microscopic external and visceral proliferative lesions, granulomas, adhesions, and fibrosis surrounding the hydrogel using Speilberg scoring of the peritoneum and histopathology of the body wall and coelom. Acutely, gross monitoring displayed rapid coagulation of blood in response to the implantation wound with development of fibrinous adhesions surrounding the hydrogel by 72 h post-implantation consistent with early stage FBR. While these results were undesirable for aquaculture vaccines, this work informs on the innate immune response to an implanted biopolymer hydrogel in Atlantic salmon and directs future research using cellulose nanomaterial formulations in Atlantic salmon for a new generation of aquaculture vaccine technology.
Subject(s)
Cellulose, Oxidized , Fish Diseases , Nanofibers , Salmo salar , Animals , Hydrogels , Antigens , Adjuvants, Immunologic , Bacterial Vaccines , Cellulose , AquacultureABSTRACT
UV protection has become crucial as increasing environmental pollution has led to the destruction of the ozone layer, which has a weakened ability to block UV rays. In this paper, we successfully prepared cellulose-based biomass films with high UV shielding effect, high transparency and high tensile strength by graft-modifying oxidized cellulose nanocellulose (TOCN) with folic acid (FA) and borrowing vacuum-assisted filtration. The films had tunable UV shielding properties depending on the amount of FA added. When the FA addition was 20 % (V/V), the film showed 0 % transmittance in the UV region (200-400 nm) and 90.61 % transmittance in the visible region (600 nm), while the tensile strength was up to 150.04 MPa. This study provides a new integrated process for the value-added utilization of nanocellulose and a new route for the production of functional biomass packaging materials. The film is expected to be applied in the field of food packaging with UV shielding.
Subject(s)
Cellulose, Oxidized , Cellulose , Tensile StrengthABSTRACT
Cellulose is the richest renewable polymer source on the earth. TEMPO-mediated oxidized cellulose nanofibers are deduced from enormously available wood biomass and functionalized with carboxyl groups. The preparation procedure of TOCNFs is more environmentally friendly compared to other cellulose, for example, MFC and CNCs. Due to the presence of functional carboxyl groups, TOCNF-based materials have been studied widely in different fields, including biomedicine, wastewater treatment, bioelectronics and others. In this review, the TEMPO oxidation mechanism, the properties and applications of TOCNFs are elaborated. Most importantly, the recent advanced applications and the beneficial role of TOCNFs in the various abovementioned fields are discussed. Furthermore, the performances and research progress on the fabrication of TOCNFs are summarized. It is expected that this timely review will help further research on the invention of novel material from TOCNFs and its applications in different advanced fields, including biomedicine, bioelectronics, wastewater treatment, and the energy sector.
Subject(s)
Cellulose, Oxidized , Nanofibers , Cyclic N-Oxides , Cellulose , Oxidation-ReductionABSTRACT
Recently, attention has been paid to cellulose nanofibers, such as 2,2,6,6-tetramethylpiperidine-1-oxyl-oxidized cellulose nanofibers (TOCN), as new bio-based materials. In addition, hydrophobized surface on TOCNs can be expected to provide new applications. Based on our previous finding that partially 2-deoxygenated (P2D)-amylose, which was synthesized by GP-catalyzed enzymatic copolymerization of D-glucal with α-d-glucose 1-phosphate (Glc-1-P) as comonomers, was hydrophobic, in this study, hydrophobization of surfaces on TOCNs was investigated by the GP-catalyzed enzymatic grafting of P2D-amylose chains on TOCNs. After maltooligosaccharide primers were modified on TOCNs, the GP-catalyzed enzymatic copolymerization of D-glucal with Glc-1-P was performed for grafting of P2D-amylose chains. 1H NMR spectroscopic analysis confirmed the production of P2D-amylose-grafted TOCNs with different 2-deoxyglucose/Glc unit ratios. The powder X-ray diffraction profiles of the products indicated that the entire crystalline structures were strongly affected by the unit ratios and chain lengths of the grafted polysaccharides. The SEM images observed differences in nanofiber diameter in the reaction solutions and surface morphology after film formation, due to grafting of P2D-amylose chains from TOCNs. The water contact angle measurement of a cast film prepared from the product indicated its hydrophobicity.
Subject(s)
Cellulose, Oxidized , Nanofibers , Cellulose , Amylose , Calcium GluconateABSTRACT
Nanocatalysts tend to aggregate and are difficult to recycle, limiting their practical applications. In this study, an environmentally friendly method was developed to produce cellulose beads for use as supporting materials for Cu-based nanocatalysts. Cellulose beads were synthesized from a water-in-oil emulsion using cellulose dissolved in an LiBr solution as the water phase and vegetable oil as the oil phase. Upon cooling, the gelation of the cellulose solution produced spherical cellulose beads, which were then oxidized to introduce surface carboxyl groups. These beads (diameter: 95-105 µm; specific surface area: 165-225 m2 g-1) have a three-dimensional network of nanofibers (width: 20-30 nm). Furthermore, the Cu2O nanoparticles were loaded onto oxidized cellulose beads before testing their catalytic activity in the reduction of 4-nitrophenol using NaBH4. The apparent reaction rate constant increased with increasing loading of Cu2O nanoparticles and the conversion efficiency was >90 %. The turnover frequency was 376.2 h-1 for the oxidized cellulose beads with the lowest Cu2O loading, indicating a higher catalytic activity compared to those of other Cu-based nanoparticle-loaded materials. In addition to their high catalytic activity, the cellulose beads are reusable and exhibit excellent stability.
Subject(s)
Cellulose, Oxidized , Nanoparticles , Cellulose , Emulsions , Plant Oils , WaterABSTRACT
The rapid development of hydrogels has garnered significant attention in health monitoring and human motion sensing. However, the synthesis of multifunctional conductive hydrogels with excellent strain/pressure sensing and photoresponsiveness remains a challenge. Herein, the conductive hydrogels (BPTP) with excellent mechanical properties, fatigue resistance and photoresponsive behavior composed of polyacrylamide (PAM) matrix, 2,2,6,6-tetramethylpiperidin-1-yloxy-oxidized cellulose nanofibers (TOCNs) reinforcement and polydopamine-modified black phosphorus (BP@PDA) photosensitizer are prepared through a facile free-radical polymerization approach. The PDA adhered to the BP surface by π-π stacking promotes the optical properties of BP while also preventing BP oxidation from water. Through hydrogen bonding interactions, TOCNs improve the homogeneous dispersion of BP@PDA nanosheets and the mechanical toughness of BPTP. Benefiting from the synergistic effect of PDA and TOCNs, the conductive BPTP integrates superior mechanical performances, excellent photoelectric response and photothermal conversion capability. The BPTP-based sensor with high cycling stability demonstrates superior strain sensitivity (GF = 6.0) and pressure sensing capability (S = 0.13 kPa-1) to monitor various human activities. Therefore, this work delivers an alternative construction strategy for generating high-performance conductive hydrogels as multifunctional wearable sensors.
Subject(s)
Cellulose, Oxidized , Wearable Electronic Devices , Humans , Electric Conductivity , Hydrogels , Hydrogen BondingABSTRACT
Efficiently addressing the challenge of leakage is crucial in the advancement of solid-liquid phase change thermal storage composite materials; however, numerous existing preparation methods often entail complexity and high energy consumption. Herein, a straightforward blending approach was adopted to fabricate stable phase change nanocomposites capitalizing on the interaction between TEMPO-oxidized cellulose nanofibers (TOCNF) and polyethylene glycol (PEG) molecules. By adjusting the ratio of TOCNF to PEG and the molecular weights of PEG, TOCNF/PEG phase change composites (TPCC) with customizable phase transition temperature (40.3-59.1 °C) and high phase transition latent heat (126.3-172.1 J/g) were obtained. The TPCC of high-loaded PEG (80-95 wt%) ensured a leakage rate of less than 1.7 wt% after 100 heating-cooling cycles. Moreover, TPCC exhibits excellent optical properties with a transmittance of over 90 % at room temperature and up to 96 % after heating. The thermal response analysis of TPCC demonstrates exceptional thermal-induced flexibility and good thermal stability, as well as recyclability and reshaping ability. This study may inspire others to design bio-based phase change composites with potential applications in thermal energy storage and management of smart-energy buildings, photothermal response devices, and waste heat-generating electronics.
Subject(s)
Cellulose, Oxidized , Nanofibers , Cellulose , Hot Temperature , Temperature , Polyethylene GlycolsABSTRACT
This study used a unique approach by developing a bilayer system that can simultaneously accomplish non-adhesion, hemostatic, and tissue regenerative properties. In this system, agarose was used as a carrier material, with an agarose-TEMPO-oxidized cellulose nanofiber (TOCN), (AT) layer acting as a non-adhesion layer and an Agarose-Extracellular matrix, (AE) layer acting as a tissue regenerative layer. Thrombin was loaded on the AE layer as an initiator of the healing process, by hemostasis. AT 1:4 showed 79.3 % and AE 1:4 showed 84.66 % cell viability initially confirming the biocompatible nature of the layers. The AE layer showed cell attachment and proliferation on its surface whereas on the AT layer, cells are visible but no attachment was observed. Furthermore, in vivo analysis was conducted. The non-adhesive layer was grafted between the cecum and peritoneal wall which showed that (AT 1:4) displayed remarkable non-adhesion properties as compared to a commercial product and the non-treated group. Hemostasis and tissue regeneration ability were evaluated using rat liver models. The bleeding time of AE 1:4TH was recorded as 160 s and the blood loss was 5.6 g. The results showed that (AE 1:4) displayed effective regeneration ability in the liver model after two weeks.
Subject(s)
Cellulose, Oxidized , Hemostatics , Nanofibers , Rats , Animals , Hemostatics/pharmacology , Sepharose , Hydrogels , Hemostasis , Tissue Adhesions , Extracellular MatrixABSTRACT
In this research, we develop a method to create biodegradable food packaging films. Initially, TEMPO-oxidized cellulose nanofiber (TOCNF) undergoes sonication to produce well-dispersed single-strain nanofibers. These nanofibers are then blended with waterborne polyurethane (WPU) to enhance their extensibility. To further enhance compatibility between these two components, a non-ionic surfactant, Tween 80, is introduced into the TOCNF/WPU mixture to improve the dispersion of the WPU within the blend. The addition of Tween 80 significantly increases the transparency of the resulting film (Transmittance: 89.4 %, Haze: 2.2 %). Furthermore, the incorporation of the surfactant effectively reduces the formation of wrinkles and cracks during the film drying process, preventing adverse impacts on the film's barrier properties. The thin film further undergoes esterification crosslinking with citric acid to remove its hydrophilic groups for better water vapor barrier properties. The resulting bio-based packaging film exhibits remarkable transparency, strong biodegradability, and superior gas-barrier properties (water vapor and oxygen) compared to commonly used food packaging.
Subject(s)
Cellulose, Oxidized , Nanofibers , Cellulose , Steam , Polysorbates , Food Packaging , Surface-Active AgentsABSTRACT
In this work, we have demonstrated agar and oxidized bacterial cellulose cryogels as a potential hemostatic dressing material. TEMPO-oxidized bacterial cellulose (OBC) was incorporated into the agar matrix, improving its mechanical and hemostatic properties. The oxidation of bacterial cellulose (BC) was evidenced by chemical characterization studies, confirming the presence of carboxyl groups. The in vitro blood clotting test conducted on agar/OBC composite cryogels demonstrated complete blood clotting within 90 seconds, indicating their excellent hemostatic efficacy. The cryogels exhibited superabsorbent properties with a swelling degree of 4200%, enabling them to absorb large amounts of blood. Moreover, the compressive strength of the composite cryogels was appreciably improved compared to pure agar, resulting in a more stable physical structure. The platelet adhesion test proved the significant ability of the composite cryogels to adhere to and aggregate platelets. Hemocompatibility and cytocompatibility tests have verified the safety of these cryogels for hemostatic applications. Finally, the material exhibited remarkable in vivo hemostatic performance, achieving clotting times of 64 seconds and 35 seconds when tested in the rat tail amputation model and the liver puncture model, respectively. The experiment results were compared with those of commercial hemostat, Axiostat, and Surgispon, affirming the potential of agar/OBC composite cryogel as a hemostatic dressing material.
Subject(s)
Cellulose, Oxidized , Hemostatics , Rats , Animals , Hemostatics/pharmacology , Hemostatics/chemistry , Cellulose, Oxidized/pharmacology , Cryogels/pharmacology , Cryogels/chemistry , Agar , Cellulose/pharmacologyABSTRACT
Traditional adhesives easily release toxic gases during the preparation process or apply to wood composite products, which have adverse effects on the human body and the environment. Herein, an all-water-based high-performance wood adhesive is prepared using TEMPO-oxidized cellulose nanofiber (TOCNF), acrylamide (AM), and tannic acid (TA) through free radical polymerization. Different characteristics of the prepared composites, including morphology, injectability, and adhesion properties, have been investigated. Results showed that the TA/TOCNF/PAM composite has excellent injectability. The addition of TA can enhance the lap shear strength of the TA/TOCNF/PAM composites and with the increment of TA content, the lap shear strength gradually decreases. The formation of effective hydrogen bonds and Van der Waals interaction among the rich functional groups in the composite, lead to strong lap shear strength on different substrates. The composite with 5.0 g of AM, 5.0 g of the TOCNF suspension and 0.1 g TA possesses a high lap shear strength of 10.5 MPa on wood and 1.5 MPa on aluminium. Based on strong adhesion properties and excellent injectability, the TA/TOCNF/PAM composites have great potential in the furniture construction and building industries.
Subject(s)
Cellulose, Oxidized , Nanofibers , Polyphenols , Humans , Adhesives/chemistry , Cellulose/chemistry , Nanofibers/chemistry , Wood/chemistry , Water/analysis , Cellulose, Oxidized/analysisABSTRACT
Pure gelatin film often exhibits high hydrophilicity and a lack of antibacterial activity, hindering its practical application in the field of food preservation. To address these issues, we incorporated 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized bacterial cellulose (TOBC) nanofibers stabilized cinnamon essential oil (CEO) Pickering emulsions into the gelatin matrix to develop active food packaging films. The study revealed that the good distribution of emulsion droplets in the film matrix. While with increasing Pickering emulsion proportion, the microstructures of composite films were more heterogeneous, showing some pores or cavities. In addition, the insertion of TOBC-stabilized CEO emulsions could improve the elongation at break (EAB), water-resistance, UV blocking ability, and antibacterial activity of film, but reduced its tensile strength (TS) and water vapor barrier properties (WVP). Notably, the film prepared with 4 % TOBC-stabilized CEO Pickering emulsion demonstrated enhanced preservation of strawberries. Overall, the as-prepared gelatin-based active composite films have considerable potential for food packaging.
Subject(s)
Cellulose, Oxidized , Nanofibers , Oils, Volatile , Cellulose, Oxidized/chemistry , Gelatin/chemistry , Oils, Volatile/pharmacology , Oils, Volatile/chemistry , Cinnamomum zeylanicum/chemistry , Emulsions/chemistry , Anti-Bacterial AgentsABSTRACT
The study aimed to develop a multifunctional wound dressing with enhanced antibacterial properties and wound healing promotion. The synthesis process involved preparing oxidized regenerated cellulose (ORC) following a modified procedure, synthesizing chitosan/silver nanoparticles (CS/Ag NPs) via an in-situ reduction method, and subsequently preparing ORC/CS/Lys@Ag NPs hydrogels. Characterization techniques including FTIR, XRD, SEM, and EDS were employed to analyze functional groups, lattice structure, morphology, and elemental composition. Gelation time, swelling behavior, water retention, mechanical properties, viscosity, self-healing capacity, rheological behavior, oxygen permeability, in vitro degradation, release of Ag+, and antibacterial properties were evaluated using various experimental methods. Results indicated that the novel wound dressing has the capability to evenly distribute Ag NPs to effectively counteract bacteria. It can maintain moist conditions for 86 h, resist a sturdy mechanical pressure of 11.3 KPa, and degrade by 11.045 % ± 0.429 within 8 h. Combining its efficient gas exchange abilities, self-repairing function, and biocompatibility, almost full recovery was observed in injured mouse skin within 13 days, highlighting its promising clinical utility.
Subject(s)
Cellulose, Oxidized , Cellulose , Chitosan , Metal Nanoparticles , Mice , Animals , Silver/chemistry , Hydrogels/pharmacology , Hydrogels/chemistry , Cellulose, Oxidized/pharmacology , Lysine , Wound Healing , Metal Nanoparticles/chemistry , Prospective Studies , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Bandages , Chitosan/chemistryABSTRACT
Management of noncompressible torso hemorrhage is an urgent clinical requirement, desiring biomaterials with rapid hemostasis, anti-infection and excellent resilient properties. In this research, we have prepared a highly resilient cryogel with both hemostatic and antibacterial effects by chemical crosslinking and electrostatic interaction. The network structure crosslinked by quaternized chitosan and genipin was interspersed with oxidized bacterial cellulose after lyophilization. The as-prepared cryogel can quickly return to the original volume when soaking in water or blood. The appropriately sized pores in the cryogel help to absorb blood cells and further activate coagulation, while the quaternary ammonium salt groups on quaternized chitosan inhibit bacterial infections. Both cell and animal experiments showed that the cryogel was hypotoxic and could promote the regeneration of wound tissue. This research provides a new pathway for the preparation of double crosslinking cryogels and offers effective and safe biomaterials for the emergent bleeding management of incompressible wounds.
Subject(s)
Cellulose, Oxidized , Chitosan , Hemostatics , Animals , Cryogels/chemistry , Chitosan/pharmacology , Chitosan/chemistry , Cellulose, Oxidized/pharmacology , Wound Healing , Hemostatics/pharmacology , Hemostatics/chemistry , Hemorrhage/drug therapy , Biocompatible Materials/pharmacology , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistryABSTRACT
Ecotoxicity data on cellulose nanofibers (CNFs) are limited despite their wide potential applications prospects, such as structural and packaging materials, filters, coatings, foods, and cosmetics. In this study, toxicity tests of 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized CNFs (TEMPO-CNFs), which are one of the major CNF products commercially available in Japan, on the green alga Raphidocelis subcapitata were conducted. As nanomaterials are considered difficult-to-test substances, the Organisation for Economic Co-operation and Development has released a guidance document that provides considerations regarding ecotoxicity tests of nanomaterials. In the algal growth inhibition tests of TEMPO-CNFs, there were specific issues to be examined, including the effects of medium components on the characteristics of TEMPO-CNFs, CNF interference with algal density measurements, algal interference with CNF measurements, and the effects of ion concentration changes in the test medium by the addition of CNFs on algal growth. To examine these issues, we conducted preliminary studies and established a suitable test method for algal growth inhibition tests of TEMPO-CNFs. We confirmed that the components in the medium for algal growth inhibition tests had negligible effects on the characteristics (zeta-potential, viscosity, and morphology) and concentration stability of TEMPO-CNFs and that in vitro and in vivo fluorescence measurements were applicable for estimating the algal densities, without interference by TEMPO-CNFs. In contrast, we observed that the grown algae interfered with the CNF concentration measurements. Therefore, we established a method to correct the measured CNF concentrations by estimating the algal contribution. Furthermore, we found that the nutrient salt concentrations in the medium changed due to interactions with CNFs; however, this change did not affect algal growth. Based on the results of the preliminary studies, algal growth inhibition tests of TEMPO-CNFs were conducted using in vitro and in vivo fluorescence measurements, along with measurements of CNFs and ion concentrations in the test dispersions. The test results showed that no growth inhibition was observed on growth rate or yield even at the maximum CNF concentration of 100 mg/L, suggesting that the ecological effect of TEMPO-CNFs on algae was relatively low. The results of this study will be valuable for conducting ecotoxicity assessments on additional CNFs and comparable nanomaterials in future studies.
Subject(s)
Cyclic N-Oxides , Nanofibers , Nanofibers/chemistry , Cyclic N-Oxides/pharmacology , Cyclic N-Oxides/chemistry , Chlorophyta/drug effects , Chlorophyta/growth & development , Cellulose/chemistry , Cellulose, Oxidized/pharmacology , Cellulose, Oxidized/chemistry , Toxicity Tests/methods , Oxidation-ReductionABSTRACT
The antioxidant and antimicrobial properties of thyme essential oil (TEO) are useful for active food packaging, but its poor aqueous solubility restricts its applications. This work involves anionic cellulose nanofibers (CNFs) as the sole stabilizing agent for TEO-in-water emulsions, with oil concentrations ranging from 10 mL/L to 300 mL/L. A double mechanism was proposed: the adsorption of CNFs at oil/water interfaces restricted coalescence to a limited extent, while thickening (rheological stabilization) was required to avoid the buoyance of large droplets (>10 µm). Thickening effects comprised both higher viscosity (over 0.1 Pa·s at 10 s-1) and yield stress (approximately 0.9 Pa). Dilute emulsions had good film-forming capabilities, whereas concentrated emulsions were suitable for paper coating. Regarding antimicrobial activity, CNF-stabilized TEO-in-water emulsions successfully inhibited the growth of both Gram-negative (E. coli, S. typhimurium) and Gram-positive bacteria (L. monocytogenes). As for the antioxidant properties, approximately 50 mg of paper or 3-5 mg of film per mL of food simulant D1 were required to attain 50 % inhibition in radical scavenging tests. Nonetheless, despite the stability and the active properties of these bio-based hydrocolloids, providing this antioxidant and antimicrobial activity was incompatible with maintaining the organoleptic properties of the foodstuff unaltered.
Subject(s)
Anti-Infective Agents , Cellulose, Oxidized , Nanofibers , Oils, Volatile , Plant Oils , Thymol , Thymus Plant , Emulsions , Escherichia coli , Antioxidants/pharmacology , Cellulose , Oils, Volatile/pharmacology , Anti-Infective Agents/pharmacologyABSTRACT
BACKGROUND/AIM: Neskeep®, an absorbable polyglycolic acid spacer, has been developed as the optimal material for spacer placement surgery. However, preventing its severe adhesion is a crucial concern. Therefore, we aimed to identify an effective anti-adhesion agent for Neskeep® using rat models. MATERIALS AND METHODS: Animal experiments were performed using 60 rats, which underwent Neskeep® placement on the abdominal wall. Three types of anti-adhesion agents were employed, establishing four subgroups: Seprafilm®, INTERCEED®, AdSpray®, and only Neskeep® (control) groups. Rats were sacrificed on postoperative days 7, 14, and 28 to assess adhesion levels around the Neskeep® Macroscopic visual assessment with the Lauder score and histopathological evaluation were performed to assess the degree of adhesion. RESULTS: There were no significant differences in the proportion of Lauder scores on days 7 and 14 between the four groups. Histological evaluation revealed no significant differences between groups at any observation time. However, the mean Lauder scores at day 28 were 5.0, 1.6, 4.0, and 4.8 in the Neskeep®, Seprafilm®, INTERCEED®, and AdSpray® groups, respectively. The proportion of milder Lauder score was significantly higher in the Seprafilm® group on day 28. CONCLUSION: Seprafilm® may exhibit an anti-adhesive effect when used with Neskeep®.
Subject(s)
Polyglycolic Acid , Animals , Tissue Adhesions/prevention & control , Tissue Adhesions/pathology , Rats , Polyglycolic Acid/chemistry , Male , Hyaluronic Acid/pharmacology , Absorbable Implants , Disease Models, Animal , Abdominal Wall/surgery , Abdominal Wall/pathology , Rats, Sprague-Dawley , Cellulose, OxidizedABSTRACT
A new ultra-hydrophilic elastic sponge composite has been proposed. Medicinal herbs, commonly used in herbal medicine and subsequently discarded, are rich in natural polymer substances, making them promising candidates for various material industries. TEMPO-oxidized cellulose was extracted from medicinal herb residue, and the physicochemical properties of an ultra-hydrophilic elastic sponge, prepared through a PVA and CA impregnate cross-linking process, were investigated. The fabricated composite sponge exhibited an increase in compressive stress-strain proportional to the PVA cross-linking concentration, and its water retention capability was assessed through retention tests. Swelling tests for various solvents were conducted to evaluate the potential use of the sponge in diverse industries, revealing the highest swelling ratio in water. Pressure distribution measurements using prescale film indicated that the sponge's shock absorption capacity was enhanced by PVA cross-linking, leading to improved pressure dispersion.
Subject(s)
Cellulose , Hydrophobic and Hydrophilic Interactions , Plants, Medicinal , Polyvinyl Alcohol , Polyvinyl Alcohol/chemistry , Cellulose/chemistry , Plants, Medicinal/chemistry , Cross-Linking Reagents/chemistry , Elasticity , Water/chemistry , Cyclic N-Oxides/chemistry , Cellulose, Oxidized/chemistryABSTRACT
Achieving hemostasis in penetrating and irregular wounds is challenging because the hemostasis factor cannot arrive at the bleeding site, and substantial bleeding will wash away the blood clot. Since the inherently gradual nature of blood clot formation takes time, a physical barrier is needed before blood clot formation. Herein, an ultra-light and shape memory hemostatic aerogel consisting of oxidized bacterial cellulose (OBC) and platelet extracellular vesicles (pVEs) is reported. The OBC-pVEs aerogel provides a physical barrier for the bleeding site by self-expansion, absorbing the liquid from blood to concentrate platelets and clotting factors and accelerating the clot formation by activating platelets and transforming fibrinogen into fibrin. In the rat liver and tail injury models, the blood loss decreases by 73% and 59%, and the bleeding times are reduced by 55% and 62%, respectively. OBC-pVEs aerogel has also been shown to accelerate wound healing. In conclusion, this work introduces an effective tool for treating deep, non-compressible, and irregular wounds and offers valuable strategies for trauma bleeding and wound treatment.
Subject(s)
Blood Platelets , Gels , Hemostasis , Wound Healing , Animals , Wound Healing/drug effects , Hemostasis/drug effects , Rats , Blood Platelets/metabolism , Gels/chemistry , Extracellular Vesicles/metabolism , Extracellular Vesicles/chemistry , Male , Rats, Sprague-Dawley , Cellulose/chemistry , Blood Coagulation/drug effects , Cellulose, Oxidized/chemistry , Cellulose, Oxidized/pharmacology , Hemorrhage , Hemostatics/pharmacology , Hemostatics/chemistry , HumansABSTRACT
Lumpectomy plus radiation is a treatment option offering better survival than conventional mastectomy for patients with early-stage breast cancer. However, successive radioactive therapy remains tedious and unsafe with severe adverse reactions and secondary injury. Herein, a composite hydrogel with pH- and photothermal double-sensitive activity is developed via physical crosslinking. The composite hydrogel incorporated with tempo-oxidized cellulose nanofiber (TOCN), polyvinyl alcohol (PVA) and a polydopamine (PDA) coating for photothermal therapy (PTT) triggered in situ release of doxorubicin (DOX) drug was utilized to optimize postoperative strategies of malignant tumors inhibition. The incorporation of TOCN significantly affects the performance of composite hydrogels. The best-performing TOCN/PVA7 was selected for drug loading and polydopamine coating by rational design. In vitro studies have demonstrated that the composite hydrogel exhibited high NIR photothermal conversion efficiency, benign cytotoxicity to L929 cells, pH-dependent release profiles, and strong MCF-7 cell inhibitory effects. Then the TOCN/PVA7-PDA@DOX hydrogel is implanted into the tumor resection cavity for local in vivo chemo-photothermal synergistical therapy to ablate residue tumor tissues. Overall, this work suggests that such a chemo-photothermal hydrogel delivery system has great potential as a promising tool for the postsurgical management of breast cancer.