DNA Phenotyping: Snapshot of a Criminal.

Recent progresses in genomic technologies provide both opportunities and challenges to forensics.

Forensic science: A judicial perspective.

This article describes three major developments in forensic evidence and the use of such evidence in the courts. The first development is the advent of DNA profiling, a scientific technique for identifying and distinguishing among individuals to a high degree of probability. While DNA evidence has been used to prove guilt, it has also demonstrated that many individuals have been wrongly convicted on the basis of other forensic evidence that turned out to be unreliable. The second development is the US Supreme Court precedent requiring judges to carefully scrutinize the reliability of scientific evidence in determining whether it may be admitted in a jury trial. The third development is the publication of a formidable National Academy of Sciences report questioning the scientific validity of a wide range of forensic techniques. The article explains that, although one might expect these developments to have had a major impact on the decisions of trial judges whether to admit forensic science into evidence, in fact, the response of judges has been, and continues to be, decidedly mixed.

Single-cell transcriptomic classification of rabies-infected cortical neurons.

Cortical circuit tracing using modified rabies virus can identify input neurons making direct monosynaptic connections onto neurons of interest. However, challenges remain in our ability to establish the cell type identity of rabies-labeled input neurons. While transcriptomics may offer an avenue to characterize inputs, the extent of rabies-induced transcriptional changes in distinct neuronal cell types remains unclear, and whether these changes preclude characterization of rabies-infected neurons according to established transcriptomic cell types is unknown. We used single-nucleus RNA sequencing to survey the gene expression profiles of rabies-infected neurons and assessed their correspondence with established transcriptomic cell types. We demonstrated that when using transcriptome-wide RNA profiles, rabies-infected cortical neurons can be transcriptomically characterized despite global and cell-type-specific rabies-induced transcriptional changes. Notably, we found differential modulation of neuronal marker gene expression, suggesting that caution should be taken when attempting to characterize rabies-infected cells with single genes or small gene sets.

Cell-free DNA profiling informs all major complications of hematopoietic cell transplantation.

Allogeneic hematopoietic cell transplantation (HCT) provides effective treatment for hematologic malignancies and immune disorders. Monitoring of posttransplant complications is critical, yet current diagnostic options are limited. Here, we show that cell-free DNA (cfDNA) in blood is a versatile analyte for monitoring of the most important complications that occur after HCT: graft-versus-host disease (GVHD), a frequent immune complication of HCT, infection, relapse of underlying disease, and graft failure. We demonstrate that these therapeutic complications are informed from a single assay, low-coverage bisulfite sequencing of cfDNA, followed by disease-specific bioinformatic analyses. To inform GVHD, we profile cfDNA methylation marks to trace the cfDNA tissues-of-origin and to quantify tissue-specific injury. To inform infection, we implement metagenomic cfDNA profiling. To inform cancer relapse, we implement analyses of tumor-specific genomic aberrations. Finally, to detect graft failure, we quantify the proportion of donor- and recipient-specific cfDNA. We applied this assay to 170 plasma samples collected from 27 HCT recipients at predetermined timepoints before and after allogeneic HCT. We found that the abundance of solid-organ-derived cfDNA in the blood at 1 mo after HCT is predictive of acute GVHD (area under the curve, 0.88). Metagenomic profiling of cfDNA revealed the frequent occurrence of viral reactivation in this patient population. The fraction of donor-specific cfDNA was indicative of relapse and remission, and the fraction of tumor-specific cfDNA was informative of cancer relapse. This proof-of-principle study shows that cfDNA has the potential to improve the care of allogeneic HCT recipients by enabling earlier detection and better prediction of the complex array of complications that occur after HCT.

Population genetic analyses of Eastern Chinese Han nationality using ForenSeq™ DNA Signature Prep Kit.

Currently, the most commonly used method for human identification and kinship analysis in forensic genetics is the detection of length polymorphism in short tandem repeats (STRs) using polymerase chain reaction (PCR) and capillary electrophoresis (CE). However, numerous studies have shown that considerable sequence variations exist in the repeat and flanking regions of the STR loci, which cannot be identified by CE detection. Comparatively, massively parallel sequencing (MPS) technology can capture these sequence differences, thereby enhancing the identification capability of certain STRs. In this study, we used the ForenSeq™ DNA Signature Prep Kit to sequence 58 STRs and 94 individual identification SNPs (iiSNPs) in a sample of 220 unrelated individuals from the Eastern Chinese Han population. Our aim is to obtain MPS-based STR and SNP data, providing further evidence for the study of population genetics and forensic applications. The results showed that the MPS method, utilizing sequence information, identified a total of 486 alleles on autosomal STRs (A-STRs), 97 alleles on X-chromosome STRs (X-STRs), and 218 alleles on Y-chromosome STRs (Y-STRs). Compared with length polymorphism, we observed an increase of 260 alleles (157, 31, and 72 alleles on A-STRs, X-STRs, and Y-STRs, respectively) across 36 STRs. The most substantial increments were observed in DYF387S1 and DYS389II, with increases of 287.5% and 250%, respectively. The most increment in the number of alleles was found at DYF387S1 and DYS389II (287.5% and 250%, respectively). The length-based (LB) and sequence-based (SB) combined random match probability (RMP) of 27 A-STRs were 6.05E-31 and 1.53E-34, respectively. Furthermore, other forensic parameters such as total discrimination power (TDP), cumulative probability of exclusion of trios (CPEtrio), and duos (CPEduo) were significantly improved when using the SB data, and informative data were obtained for the 94 iiSNPs. Collectively, these findings highlight the advantages of MPS technology in forensic genetics, and the Eastern Chinese Han genetic data generated in this study could be used as a valuable reference for future research in this field.

Analysis of homozygous allele mismatches in paternity tests with massively parallel sequencing.

In paternity testing, short tandem repeats (STRs) allele mismatches are often detected. Nowadays, polymerase chain reaction- and capillary electrophoresis (CE)-based STR genotyping is the most commonly used method to distinguish alleles based on their length. However, it could not detect alleles of the same size with sequence differences. Massively parallel sequencing (MPS) can determine not only allele sizes but also sequences, which could explain the causes of allele mismatches. Additionally, more types of genetic markers can be detected in a single assay, which increases the discriminatory power and facilitates the analysis of paternity tests. In this study, we analyzed 11 cases with homozygous allele mismatches from routine DNA trio paternity tests using the CE platform. Samples were sequenced using the ForenSeq DNA Signature Prep Kit and the MiSeq FGx Sequencing System. The results show that of the eight father-child mismatch cases and three mother-child mismatch cases, five cases with D5S818 and D8S1179 and one case at D13S317 were classified as non-amplification. The other three cases and two cases could be defined as mutations. This study suggests that MPS-based STR genotyping can provide additional information that allows more accurate interpretation of allelic mismatches in paternity testing.

A novel three-step DNA extraction method for mixed bloodstains.

Mixed DNA samples from at least two contributors can be present at a crime scene, which could be the most crucial piece of genetic evidence. The mixed stains in sexual assault cases are typically separated using differential lysis procedures (a two-step method). Blood mixed stains, however, are usually difficult to separate. In this work, we propose that a mixed stain comprises three layers, that is, (1) the upper layer which is primarily made up of cells from one contributor; (2) the middle layer which is a similar mixture from two contributors; and (3) the lower layer which primarily comprises cells from the other contributor. Based on this concept, a novel three-step DNA extraction method was proposed to solve the challenge involving bloodstains from two contributors. In the experiment, we extracted three layers DNA from mixed bloodstains using three steps. As a result, single-source DNA and approximate single-source DNA were detected from steps 1 and 3, respectively. This study demonstrates that the DNA from some mixed blood stains could be effectively separated following an appropriate extraction strategy, providing valuable insights, and serving as a reference for future examination of blood mixtures.

Assessment of the efficiency of DNA isolation and profiling applying a temperature-driven method in human remains.

The identification of human remains is of utmost importance in a variety of scenarios. One of the primary identification methods is DNA. DNA extraction from human remains could be difficult, particularly in situations where the remains have been exposed to environmental conditions and other insults. Several studies tried to improve extraction by applying different approaches. ForensicGEM Universal (MicroGem) is a single-tube approach to DNA extraction and a temperature-driven method that could have some advantages with respect to previous techniques, among them, reducing the risk of contamination, not requiring specialized equipment, or several steps to perform. The aim of this study was to assess, for the first time, the efficiency of DNA extraction and quality of STR profiles applying the MicroGem protocol and modifications of this protocol from tooth samples in comparison with automatic extraction (AE). Our results indicated that AE and MicroGem performed similar, though with variability depending on the MicroGem modifications, increasing the DNA yield and STR profile quality when DNA is concentrated with Microcon. These findings demonstrated the efficiency of this methodology for DNA extraction from human remains while also providing a simple and quick technique suitable to apply in a variety of forensic scenarios.

Improving DNA mixtures analysis using compound markers composed of InDels and SNPs screened from the whole genome with next-generation sequencing.

Next-generation sequencing (NGS) allows for better identification of insertion and deletion polymorphisms (InDels) and their combination with adjacent single nucleotide polymorphisms (SNPs) to form compound markers. These markers can improve the polymorphism of microhaplotypes (MHs) within the same length range, and thus, boost the efficiency of DNA mixture analysis. In this study, we screened InDels and SNPs across the whole genome and selected highly polymorphic markers composed of InDels and/or SNPs within 300 bp. Further, we successfully developed and evaluated an NGS-based panel comprising 55 loci, of which 24 were composed of both SNPs and InDels. Analysis of 124 unrelated Southern Han Chinese revealed an average effective number of alleles (Ae ) of 7.52 for this panel. The cumulative power of discrimination and cumulative probability of exclusion values of the 55 loci were 1-2.37 × 10-73 and 1-1.19 × 10-28 , respectively. Additionally, this panel exhibited high allele detection rates of over 97% in each of the 21 artificial mixtures involving from two to six contributors at different mixing ratios. We used EuroForMix to calculate the likelihood ratio (LR) and evaluate the evidence strength provided by this panel, and it could assess evidence strength with LR, distinguishing real and noncontributors. In conclusion, our panel holds great potential for detecting and analyzing DNA mixtures in forensic applications, with the capability to enhance routine mixture analysis.

Developmental validation of a custom-designed Multi-InDel panel: A five-dye multiplex amplification system for challenging DNA samples.

The continual investigation of novel genetic markers has yielded promising solutions for addressing the challenges encountered in forensic DNA analysis. In this study, we have introduced a custom-designed panel capable of simultaneously amplifying 41 novel Multi-insertion/deletion (Multi-InDel) markers and an amelogenin locus using the capillary electrophoresis platform. Through a developmental validation study conducted in accordance with guidelines recommended by the Scientific Working Group on DNA Analysis Methods, we demonstrated that the new Multi-InDel system exhibited the sensitivity to produce reliable genotyping profiles with as little as 62.5 pg of template DNA. Accurate and complete genotyping profiles could be obtained even in the presence of specific concentrations of PCR inhibitors. Furthermore, the maximum amplicon size for this system was limited to under 220 bp in the genotyping profile, resulting in its superior efficiency compared to commercially available short tandem repeat kits for both naturally and artificially degraded samples. In the context of mixed DNA analysis, the Multi-InDel system was proved informative in the identification of two-person DNA mixture, even when the template DNA of the minor contributor was as low as 50 pg. In conclusion, a series of performance evaluation studies have provided compelling evidence that the new Multi-InDel system holds promise as a valuable tool for forensic DNA analysis.

Comparison of massively parallel sequencing to capillary electrophoresis for short tandem repeat genotyping of trace DNA.

In forensic genetics, massively parallel sequencing (MPS) offers several advantages over the current golden standard, capillary electrophoresis (CE): additional sequence information, shorter amplicon lengths, and the simultaneous analysis of many markers. These benefits result in a reduced number of reactions necessary while improving the amount of data obtained, thereby conserving valuable sample extracts. This proves particularly advantageous for the analysis of trace DNA. This study assessed the suitability of MPS for short tandem repeat (STR) typing of low template samples compared with results obtained through CE. The MPS genotypes showed higher concordance to reference genotypes, with donor alleles being more frequently assigned to be the major contributor, meeting the requirements for database entry. However, the MPS workflow is more time-consuming and associated with higher costs.

Effects and considerations of multiplexing ForenSeq Kintelligence libraries with a negative control.

The negative template control or negative amplification control has been an essential component of the forensic DNA analysis workflow that helps monitor contamination. As such, the inclusion of a negative control in forensic DNA analysis has been a requirement for all laboratories audited under the FBI's Quality Assurance Standards. As massively parallel sequencing (MPS) becomes more conventional in forensic laboratories, considerations for the inclusion of a negative control in every sequencing run can be evaluated. Although the inclusion of a negative control in library preparation and the first sequencing run has a practical function, there is less utility for its inclusion in all subsequent sequencing runs for that library preparation. Although this is universal to all MPS assays, it is most relevant for an assay that has a low sample multiplexing capacity, such as the ForenSeq Kintelligence Kit (Qiagen/Verogen, Inc.). The ForenSeq Kintelligence Kit is an investigative genetic genealogy (IGG) sequencing-based assay that targets 10,230 forensically relevant single-nucleotide polymorphisms. The manufacturer recommends multiplexing 3 libraries per sequencing run, which includes controls. The purpose of this study was to investigate the effect of the inclusion of a negative control in every Kintelligence sequencing run. We observed that the library generated from a negative amplification control will take 7%-14% of the run output. The loss of sequencing space taken by a negative control decreased the available output for DNA-containing samples, leading in some cases to allele or locus dropout and accompanying higher numbers of sixth to seventh order unknown associations in GEDmatch PRO.

A developmental validation of the Quick TargSeq 1.0 integrated system for automated DNA genotyping in forensic science for reference samples.

Analysis of short tandem repeats (STRs) is a global standard method for human identification. Insertion/Deletion polymorphisms (DIPs) can be used for biogeographical ancestry inference. Current DNA typing involves a trained forensic worker operating several specialized instruments in a controlled laboratory environment, which takes 6-8 h. We developed the Quick TargSeq 1.0 integrated system (hereinafter abbreviated to Quick TargSeq) for automated generation of STR and DIP profiles from buccal swab samples and blood stains. The system fully integrates the processes of DNA extraction, polymerase chain reaction (PCR) amplification, and electrophoresis separation using microfluidic biochip technology. Internal validation studies were performed using RTyper 21 or DIP 38 chip cartridges with single-source reference samples according to the Scientific Working Group for DNA Analysis Methods guidelines. These results indicated that the Quick TargSeq system can process reference samples and generate STR or DIP profiles in approximately 2 h, and the profiles were concordant with those determined using traditional STR or DIP analysis methods. Thus, reproducible and concordant DNA profiles were obtained from reference samples. Throughout the study, no lane-to-lane or run-to-run contamination was observed. The Quick TargSeq system produced full profiles from buccal swabs with at least eight swipes, dried blood spot cards with two 2-mm disks, or 10 ng of purified DNA. Potential PCR inhibitors (i.e., coffee, smoking tobacco, and chewing tobacco) did not appear to affect the amplification reactions of the instrument. The overall success rate and concordance rate of 153 samples were 94.12% and 93.44%, respectively, which is comparable to other commercially available rapid DNA instruments. A blind test initiated by a DNA expert group showed that the system can correctly produce DNA profiles with 97.29% genotype concordance with standard bench-processing methods, and the profiles can be uploaded into the national DNA database. These results demonstrated that the Quick TargSeq system can rapidly generate reliable DNA profiles in an automated manner and has the potential for use in the field and forensic laboratories.

Pilot validation of on-field STR typing and human identity testing by MinION nanopore sequencing.

Nanopore sequencing technology has broad application prospects in forensic medicine due to its small size, portability, fast speed, real-time result analysis capabilities, single-molecule sequencing abilities, and simple operation. Here, we demonstrate for the first time that nanopore sequencing platforms can be used to identify individuals in the field. Through scientific and reasonable design, a nanopore MinION MK1B device and other auxiliary devices are integrated into a portable detection box conducive to individual identification at the accident site. Individual identification of 12 samples could be completed within approximately 24 h by jointly detecting 23 short tandem repeat (STR) loci. Through double-blinded experiments, the genotypes of 49 samples were successfully determined, and the accuracy of the STR genotyping was verified by the gold standard. Specifically, the typing success rate for 1150 genotypes was 95.3%, and the accuracy rate was 86.87%. Although this study focused primarily on demonstrating the feasibility of full-process testing, it can be optimistically predicted that further improvements in bioinformatics workflows and nanopore sequencing technology will help enhance the feasibility of Oxford Nanopore Technologies equipment for real-time individual identification at accident sites.

Self- and non-self-DNA on hands and sleeve cuffs.

Studying DNA transfer and persistence has become increasingly important over the last decade, due to the impressive sensitivity of modern DNA detection methods in forensic genetics. To improve our understanding of background DNA that could also potentially be transferred, we analyzed the DNA composition on the outside of sleeve cuffs and sampled DNA directly from the hands of four different collaborators upon their arrival at work during 25 working days. Sampling of their hands was repeated after several hours working in our department. The shedder status of the participants, as assumed from previous internal studies, was well re-produced in the study. However, we noticed that the DNA shedding capacity could also change drastically during the day, with one participant showing a more than sixfold increase between hands sampled in the morning and hands sampled in the afternoon. As expected, poor DNA shedders carry more relative amounts of non-self-DNA on their hands than good shedders. Non-self-alleles were detected in 95% of the samples. We also observed potential effects of hand washing and the mode of transport to get to work on the DNA amount. People living with family members occasionally carried their DNA on their hands and more frequently on their sleeve cuffs. Sleeve cuffs, as being close to our hands, have a large potential to transfer DNA from one place to another, yet they have sparsely been studied as DNA transfer intermediates so far. In general, we collected consistently more DNA from the sleeve cuffs than from the hands of the participants, demonstrating their importance as potential transfer vectors. More DNA was recovered from sleeve cuffs made of synthetic fabric than from cuffs made of cotton or leather. In the afternoon, DNA from co-habitant family members could not be detected on the hands anymore and the detection of profiles from colleagues became more frequent. From two out of 100 analyzed sleeve cuffs and two out of 200 sampled hands, we established unknown major DNA profiles that would have been suitable for an entry in the national DNA database. This finding demonstrates the possibility to transfer DNA that has most likely been picked up somewhere in the public space.

Internal validation of the GA118-24B Genetic Analyzer, a stable capillary electrophoresis system for forensic DNA identification.

The GA118-24B Genetic Analyzer (hereafter, "GA118-24B") is an independently developed capillary electrophoresis instrument. In the present research, we designed a series of validation experiments to test its performance at detecting DNA fragments compared to the Applied Biosystems 3500 Genetic Analyzer (hereafter, "3500"). Three commercially available autosomal short tandem repeat multiplex kits were used in this validation. The results showed that GA118-24B had acceptable spectral calibration for three kits. The results of accuracy and concordance studies were also satisfactory. GA118-24B showed excellent precision, with a standard deviation of less than 0.1 bp. Sensitivity and mixture studies indicated that GA118-24B could detect low-template DNA and complex mixtures as well as the results generated by 3500 in parallel experiments. Based on the experimental results, we set specific analytical and stochastic thresholds. Besides, GA118-24B showed superiority than 3500 within certain size ranges in the resolution study. Instead of conventional commercial multiplex kits, GA118-24B performed stably on a self-developed eight-dye multiplex system, which were not performed on 3500 Genetic Analyzer. We compared our validation results with those of previous research and found our results to be convincing. Overall, we conclude that GA118-24B is a stable and reliable genetic analyzer for forensic DNA identification.

Evaluation of the usefulness of insertion-null markers in critical skeletal remains.

Forensic DNA analysis in compromised skeletal remains may pose challenges due to DNA degradation, often resulting in partial or negative autosomal STRs profiles. To address this issue, alternative approaches such as mitochondrial DNA or SNPs typing may be employed; however, they are labour-intensive and costly. Insertion-null alleles (INNULs), short interspersed nuclear elements, have been suggested as a valuable tool for human identification in challenging samples due to their small amplicon size. A commercial kit including 20 INNULs markers along with amelogenin (InnoTyper® 21) has been developed. This study assesses its utility using degraded skeletal remains, comparing the results obtained (the number of detected alleles, RFU values, PHR, and the number of reportable markers) to those obtained using GlobalFiler™. Subsequently, the random match probability of the two profiles for each sample was determined using Familias version 3 to evaluate the power of discrimination of the results obtained from each kit. In every sample, InnoTyper® 21 yielded more alleles, higher RFU values, and a greater number of reportable loci. However, in most cases, both profiles were similarly informative. In conclusion, InnoTyper® 21 serves as a valuable complement to the analysis of challenging samples in cases where a poor or negative profile was obtained.

Sex and blood group determination from hair using ATR-FTIR spectroscopy and chemometrics.

Examination of hair with its intact root is commonly used for DNA profiling of the donor. However, its use for gathering other types of information is less explored. Using attenuated total reflectance-Fourier transform infrared spectroscopy, the present study aims to explore other relevant aspects in a non-destructive manner for forensics. Determining the sex and blood group of human hair samples were the major goals of the study. Sex determination was accomplished by analyzing the differential vibrational intensities and stretching of various chemical groups associated with hair and its proteins. Statistical inference of spectral data was performed using chemometric algorithms such as PCA and PLS-DA. The PLS-DA model determined sex with 100% accuracy and blood grouping with an average accuracy of 95%. The present study is the first of its kind to determine sex and blood grouping from human scalp hair shafts, as far as the author knows. By acting as a preliminary screening test, this study could have significant implications for forensic analysis of crime scene samples. Human and synthetic hair were used in validation studies, resulting in 100% accuracy, specificity, and sensitivity, with 0% false positives and false negatives. The technique ATR FTIR spectroscopy could complement the currently used methods of hair analysis such as physical examination and mitochondrial or genomic DNA analysis.

Nails as optimal source of DNA for molecular identification of 5 decomposed bodies recovered from seawater: from Y-ancestry to personal identification.

Molecular identification of extremely compromised human remains in forensic field is usually performed from DNA typing of bones, which are a difficult sample to work with. Moreover, autosomal STR profiles do not always result in the identification of the donor due to lack of comparisons or non-hit throughout database searching. An attempt to overcome these issues is represented by fingernails as an alternative DNA source and Y-STRs typing to infer both geographical and familial ancestry of the unknown donor. In this study, we analyzed both 24 autosomal and 27 Y-chromosome STRs from unidentified human remains (UHRs) of five males recovered from the water near the southwestern coast of Sardinia by the Italian Harbor Master's Office. Nail clippings provided an optimal source of autologous DNA for molecular identification in a very short time, producing complete autosomal and Y-STR profiles even under conditions of high body degradation. Unfortunately, no match neither compatibility occurred using autosomal STRs (aSTRs), initially. Upon analyzing the Y-haplotypes, we found out they had already been observed in northern Africa, providing us important investigative leads. This prompted the International Criminal Police Organization (INTERPOL) to provide us with references of alleged relatives that were then confirmed to be related. The use of fingernails represents an excellent DNA source especially for genetic identification of decomposed bodies recovered in seawater environment. Notably, DNA extracted from nails gave high-quality Y-STR haplotypes by which predicting paternal ancestry of the unidentified donors may result fundamental in the forensic investigative context.

Evaluation of metal ions and DNA recovery from the surface of fired and unfired brass ammunition to improve STR profiling.

Interest in recovering DNA from the surface of ammunition evidence for genotyping has increased over the past few years. Numerous studies have examined a variety of methods to maximize DNA recovery from these types of challenging samples, but successful DNA profiling has been inconsistent. Low amounts of DNA and PCR inhibition due to metal ions have been suggested as the leading causes of poor results; however, no study quantitatively examined the presence of metal ions at various stages of the DNA analysis workflow from DNA collection through to amplification. In this study, the effectiveness of six different DNA collection and purification methods commonly used by forensic laboratories to process brass ammunition for DNA evidence was investigated. The amount of copper, zinc, and other metals co-recovered from fired and unfired brass casings during DNA collection (using numerous soaking, swabbing, and direct PCR protocols) was quantified via Inductively Coupled Plasma - Optical Emission Spectrometry (ICP-OES). This same panel of metals was subsequently quantified after DNA lysis and purification steps. Results demonstrated that low amounts of DNA, DNA damage, and degradation are more detrimental to STR typing results than PCR inhibition, as metal ions were successfully removed by all DNA purification methods tested. Furthermore, the use of metal ion chelators increased the amount of DNA recovered and number of reportable STR alleles. This research informs the forensic community on the most effective way to collect and process trace amounts of biological material from brass ammunition and similar evidence.