Co-exposure to fluoride and sulfur dioxide induces abnormal enamel mineralization in rats via the FGF9-mediated MAPK signaling pathway.

Fluoride (F) and sulfur dioxide (SO2) contamination is recognized as a public health concern worldwide. Our previous research has shown that Co-exposure to F and SO2 can cause abnormal enamel mineralization. Ameloblastin (AMBN) plays a crucial role in the process of enamel mineralization. However, the process by which simultaneous exposure to F and SO2 influences enamel formation by regulating AMBN expression still needs to be understood. This study aimed to establish in vivo and in vitro models of F-SO2 Co-exposure and investigate the relationship between AMBN and abnormal enamel mineralization. By overexpressing/knocking out the Fibroblast Growth Factor 9 (FGF9) gene, we investigated the impact of FGF9-mediated Mitogen-Activated Protein Kinase (MAPK) signaling on AMBN synthesis to elucidate the mechanism underlying the induction of abnormal enamel mineralization by F-SO2 Co-exposure in rats. The results showed that F-SO2 exposure damaged the structure of rat enamel and ameloblasts. When exposed to F or SO2, gradual increases in the protein expression of FGF9 and phosphorylated p38 mitogen-activated protein kinase (p-P38) were observed. Conversely, the protein levels of AMBN, phosphorylated extracellular signal-regulated kinase (p-ERK), and phosphorylated c-Jun N-terminal kinase (p-JNK) were decreased. AMBN expression was significantly correlated with FGF9, p-ERK, and p-JNK expression in ameloblasts. Interestingly, FGF9 overexpression reduced the levels of p-ERK and p-JNK, worsening the inhibitory effect of F-SO2 on AMBN. Conversely, FGF9 knockout increased the phosphorylation of ERK and JNK, partially reversing the F-SO2-induced downregulation of AMBN. Taken together, these findings strongly demonstrate that FGF9 plays a critical role in F-SO2-induced abnormal enamel mineralization by regulating AMBN synthesis through the JNK and ERK pathways.

Effect of combining aminomethacrylate and fluoride against erosive and abrasive challenges on enamel and dentin.

This study evaluated the effect of solutions containing aminomethacrylate copolymer (AA) and sodium fluoride (F; 225 ppm F-) or fluoride plus stannous chloride (FSn; 225 ppm F-, 800 ppm Sn2+) against enamel and dentin erosion/abrasion. Solutions F, FSn, AA, F+AA, FSn+AA, and deionized water as negative control were tested. Bovine enamel and dentin specimens (n = 13/solution/substrate) underwent a set of erosion-abrasion cycles (0.3% citric acid [5 min, 4×/day], human saliva [1 h, 4×/day], brushing [15 s, 2×/day], and treatments [2 min, 2×/day]) for each of five days. Initial enamel erosion was evaluated using Knoop microhardness after the first and second acid challenge on day 1, and surface loss with profilometry after day 5. KOH-soluble fluoride was assessed. Data were analyzed with ANOVA/Tukey tests. The combination of fluoride and AA resulted in higher protection against enamel erosion, whereas this was not the case for the combination of AA and FSn. All treatments protected against enamel and dentin loss. The lowest surface loss values were observed with F+AA and FSn+AA. The polymer did not significantly influence the KOH-soluble fluoride formation on enamel/dentin specimens. The aminomethacrylate copolymer effectively enhanced the efficacy of sodium fluoride against initial erosion and improved the control of enamel and dentin wear of F and FSn solutions.

Acquired Pellicle and Biofilm Engineering by Rinsing with Hemoglobin Solution.

INTRODUCTION: The identification of acid-resistant proteins, including hemoglobin (Hb), within the acquired enamel pellicle (AEP) led to the proposition of the "acquired pellicle engineering" concept, which involves the modification of the AEP by incorporating specific proteins, presenting a novel strategy to prevent dental demineralization. OBJECTIVE: Combining in vivo and in vitro proof-of-concept protocols, we sought to reveal the impact of AEP engineering with Hb protein on the biofilm microbiome and enamel demineralization. METHODS: In the in vivo studies, 10 volunteers, in 2 independent experiments, rinsed (10 mL,1 min) with deionized water-negative control or 1.0 mg/mL Hb. The AEP and biofilm formed along 2 or 3 h, respectively, were collected. AEP was analyzed by quantitative shotgun-label-free proteomics and biofilm by 16S-rRNA next-generation sequencing (NGS). In in vitro study, a microcosm biofilm protocol was employed. Seventy-two bovine enamel specimens were treated with (1) phosphate-buffered solution (PBS), (2) 0.12% chlorhexidine, (3) 500 ppm NaF, (4) 1.0 mg/mL Hb, (5) 2.0 mg/mL Hb, and (6) 4.0 mg/mL Hb. The biofilm was cultivated for 5 days. Resazurin, colony forming units (CFU), and transversal microradiography were performed. RESULTS: Proteomics and NGS analysis revealed that Hb increased proteins with antioxidant, antimicrobial, acid-resistance, hydroxyapatite-affinity, calcium-binding properties and showed a reduction in oral pathogenic bacteria. In vitro experiments demonstrated that the lowest Hb concentration was the most effective in reducing bacterial activity, CFU, and enamel demineralization compared to PBS. CONCLUSION: These findings suggest that Hb could be incorporated into anticaries dental products to modify the oral microbiome and control caries, highlighting its potential for AEP and biofilm microbiome engineering.

Combined Effect of a Bioinspired Self-Assembling Peptide and Fluoride Varnish on Remineralisation of Artificial Early Enamel Caries Lesion: An in vitro Study.

INTRODUCTION: This study aimed to investigate the remineralisation effect of combined use of a bioinspired self-assembling peptide (P26) and fluoride varnish on artificial early enamel caries lesions. METHODS: Bovine enamel blocks with artificial early enamel caries lesions were prepared. The blocks were randomly allocated to four experimental groups to receive the following treatments: A = P26 + fluoride varnish, B = P26, C = fluoride varnish, and D. distilled water (negative control). The treated blocks were subjected to pH cycling. Enamel blocks were collected at time points of 7 days (d7) and 21 days (d21). The mineral gain, elemental analysis and crystal characteristics of the caries lesion were assessed by micro-computed tomography, scanning electron microscopy with energy dispersive X-ray and X-ray diffraction (XRD), respectively. RESULTS: The mean ± standard deviation of mineral gain of group A to D were 17.4 ± 4.2%, 10.7 ± 2.2%, 10.1 ± 1.2%, and 6.8 ± 0.5% at d7, respectively, and 15.2 ± 2.6%, 8.7 ± 3.1%, 9.7 ± 1.2%, and 7.8 ± 2.3% at d21, respectively. A significant higher mineral gain was observed in group A when compared to other groups at both d7 and d21 (p < 0.05). The calcium-to-phosphate ratio remained consistent across all groups, ranging between 1.2 and 1.4. XRD analysis indicated that crystal composition on the surfaces was apatite for all groups. CONCLUSION: In conclusion, the present study provided a first indication of better remineralisation effects of the combined use of the bioinspired self-assembling peptide P26 and fluoride varnish compared to the effects of the respective individual uses of P26 or fluoride varnish.

Characterization of a Novel TiF4 Inclusion Complex and in vitro Evaluation of Its Effect on Inhibiting Enamel Demineralization.

INTRODUCTION: Titanium tetrafluoride (TiF4) is an anticariogenic agent with high remineralizing potential. However, the acidic pH of TiF4 solution can limit its clinical application. The present study aimed to prepare and characterize a new TiF4-dendrimer inclusion complex and evaluate its ability to inhibit enamel demineralization under pH cycling conditions. METHODS: PEG-citrate dendrimer and TiF4-dendrimer inclusion complex were synthesized and their molecular structures were evaluated using Fourier-transform Infrared Spectroscopy (FTIR), Hydrogen Nuclear Magnetic Resonance (HNMR), and Liquid Chromatography-Mass Spectrometry (LC-MS) tests. Forty-eight enamel samples were prepared and randomly divided into four groups: distilled water (negative control), TiF4 solution (T), dendrimer solution (D), and TiF4-dendrimer solution (TD). The microhardness of the samples was measured initially. Next, the samples underwent pH cycling, were exposed to the solutions, the microhardness was measured again, and microhardness loss was calculated. EDX analysis was performed on the surface and cross-sectional segments of the samples. RESULTS: The microhardness loss was significantly higher in control (-65.1 ± 6.0) compared to other groups. No significant difference was observed between T (-47.9 ± 5.6) and D (-41.7 ± 12.0) and also D and TD (-40.5 ± 9.4) in this regard. Microhardness loss was significantly higher in T compared to TD group. The TD samples showed similar fluoride and titanium content in both surface and subsurface regions, while the T group had higher concentrations in the surface region. Moreover, the TD solution had a higher pH of 3.4 compared to the T solution's pH of 1.1. CONCLUSION: No significant difference was observed between the efficacy of TiF4-dendrimer and TiF4 solution in inhibiting demineralization while TiF4-dendrimer solution had the added advantage of having a higher pH.

Influence of using different toothpaste during bleaching with violet LED light (405 nm) on the colour and roughness of dental enamel: an in vitro study.

This in vitro study aimed to investigate potential changes in the color and roughness of dental enamel resulting from the use of different toothpaste formulations during bleaching with violet LED light (405 nm). Sixty specimens of bovine incisors, each measuring 6 × 6 × 3 mm, were segregated into six distinct experimental groups based on their respective treatments (n = 10): C + VL: Brushing with Colgate® Total 12 + bleaching with violet LED; LB + VL: Brushing with Colgate® Luminous White Brilliant + bleaching with violet LED; LI + VL: Brushing with Colgate® Luminous White Instant + violet LED bleaching; C: Brushing with Colgate® Total 12; LB: Brushing with Colgate® Luminous White Brilliant; LI: Brushing with Colgate® Luminous White Instant. The examined variables included alterations in color (∆L*, ∆a*, ∆b*, ∆Eab, and ∆E00), surface roughness (Ra), and scanning electron microscopy observations. No statistically significant distinctions emerged in total color variations (∆E00 and ∆E) among the groups under scrutiny. Notably, the groups that employed Colgate® Luminous White Instant displayed elevated roughness values, irrespective of their association with violet LED, as corroborated by scanning electron microscopy examinations. It can be concluded that whitening toothpastes associated to violet LED do not influence the color change of dental enamel in fifteen days of treatment. Toothpastes with a higher number of abrasive particles showed greater changes in enamel roughness, regardless of the use of violet LED.

Impact of acid and laser etching of enamel on microleakage in different adhesive systems.

This study aimed to evaluate the microleakage of light-cured and self-cured adhesives on enamel surfaces selectively etched with Er, Cr: YSGG laser or 35% phosphoric acid. A total of 60 class V cavities were prepared 1 mm above the cemento-enamel junction (CEJ). The specimens were randomly divided into six groups. Group 1: Clearfil SE Bond with no conditioning, Group 2: Tokuyama Universal Bond with no conditioning, Group 3: Clearfil SE Bond conditioned with 35% phosphoric acid, Group 4: Tokuyama Universal Bond conditioned with 35% phosphoric acid, Group 5: Clearfil SE Bond conditioned with Er, Cr: YSGG laser and Group 6: Tokuyama Universal Bond conditioned with Er, Cr: YSGG laser. Microleakage was evaluated qualitatively (visually) and quantitatively (ImageJ). The data were analyzed using IBM SPSS V23 and submitted to Kruskal-Wallis and Wilcoxon tests. The significance level was set at p < 0.05. In all evaluation methods, the microleakage scores exhibit significant differences (p*<0.001). Group 1 and Group 3 exhibited similar and lower microleakage values than the Group 5. In the occlusal margin, the microleakage values were similar in Group 2, Group 4, and Group 6, whereas in the gingival margin Group 4 showed significantly lower leakage compared to Group 2. Regardless of the etching protocols and adhesive systems used, less microleakage was observed on the occlusal surface than on the gingival surface. Phosphoric acid etching provides better results than laser etching for enamel surface treatment on both occlusal and gingival surfaces.

In-vitro and in-vivo comparative studies of treatment effects on enamel demineralization during orthodontic therapy: implications for clinical early-intervention strategy.

OBJECTIVES: This study aimed to investigate if CPP-ACP / infiltrating resin was superior in treating enamel demineralization during orthodontic therapy compared with fluoride varnish, in order to provide early-intervention implications for dental professionals. MATERIALS AND METHODS: In the in-vitro study, premolars were grouped into four: remineralization with fluoride varnish / CPP-ACP, sealing with infiltrating resin, and negative control. Experimental demineralization of enamel surfaces was analyzed using techniques of QLF, SEM, EDS and micro-hardness testing. An in-vivo intervention study was conducted on patients randomly assigned into three groups. At the baseline and every-3-month follow-up, QLF parameters were compared temporally and parallelly to yield potential implications for promotion in clinical practice. RESULTS: The in-vitro study performed on 48 experimental tooth surfaces demonstrated that sealing with infiltrating resin reduced enamel surface porosity and increased surface micro-hardness significantly. In the in-vivo intervention study on 163 tooth surfaces, it was suggested that for those who meet the criteria of -10 < ΔF < -6 and - 1000 < ΔQ < -20 at the baseline, all these treatment methods could achieve acceptable outcomes; with the rising of absolute values of ΔF and ΔQ, sealing with infiltrating resin showed more evident advantages. CONCLUSION: For enamel demineralization during orthodontic therapy, all the treatment methods involved in this study showed acceptable effectiveness but had respective characteristics in treatment effects. QLF parameters could be used as indicators for clinical early-intervention strategy with regards to this clinical issue. CLINICAL RELEVANCE: With QLF parameters, clinical early-intervention strategy for enamel demineralization during orthodontic therapy could be optimized.

Evaluation of the effect of self-assembling peptide and fluoride varnish, alone or in combination with laser irradiation, on artificial enamel caries: a SEM/EDS and Micro-CT study.

OBJECTIVE: The aim of this study was to investigate the effect of remineralization agents such as fluoride varnish and P11-4, alone and in combination with Er: YAG laser, on in-vitro hard tissue repair in artificial enamel lesions. MATERIALS AND METHODS: A total of sixty enamel surfaces of 4 × 5 mm in size were created on both the buccal and lingual sides of thirty extracted wisdom teeth. Remineralization agents were applied to the specimens that were grouped as follows: Group 1, control; Group 2, fluoride varnish (FV); Group 3, P11-4; Group 4, laser; Group 5, laser + FV; and Group 6, laser + P11-4. The fluorescence level was determined with DiagnoDent. The enamel mineral density, area and volume, and caries lesion area and volume were determined with micro-computed tomography (µCT), surface features were evaluated using scanning electron microscopy (SEM), and elemental analysis was performed using energy dispersive x-ray spectroscopy (EDS) . RESULTS: For specimens treated only with self-assembling peptide P11-4, the caries lesion area (mm2) values were 38.19 and 21.62, and the caries lesion volume (mm3) values were 6.27 and 2.99, respectively for pre- and post-treatment. In combination usage of self-assembling peptide P11-4 and laser, the caries lesion area (mm2) values were 38.39 and 16.91, and the caries lesion volume (mm3) values were 11.15 and 3.64, respectively for pre- and post-treatment. In the application of the P11-4 alone and in combination with laser, there was a statistically significant decrease in DiagnoDent values, an increase in enamel volume(mm3),enamel area(mm2) and mineral density(g/cm3) values and a decrease in caries lesion volume(mm3) and area(mm2) obtained by µCT, and an increase in %Ca and %F values obtained by SEM/EDS analysis (p < 0.05). It was discovered that the samples treated with P11-4 had a considerably higher rise in the Ca/P ratio than the samples treated with FV (p < 0.05). The calcium content increased significantly more when P11-4 application was combined with laser irradiation (p < 0.05). CONCLUSIONS: The combined use of self-assembling peptide P11-4 and laser accelerated the remineralization process and increased the remineralization capacity. CLINICAL RELEVANCE: FV and P11-4, alone or in combination with laser, can be successfully used as remineralization agents in initial enamel caries.

Co-doped titanium dioxide nanoparticles decrease the cytotoxicity of experimental hydrogen peroxide gels for in-office tooth bleaching.

OBJECTIVE: To evaluate the efficacy and cytotoxicity of experimental 6% and 35% hydrogen peroxide gels (HP6 or HP35) incorporated with titanium dioxide nanoparticles (NP) co-doped with nitrogen and fluorine and irradiated with a violet LED light (LT). METHODS: Bovine enamel-dentin disks adapted to artificial pulp chambers were randomly assigned to bleaching (n = 8/group): NC (negative control), NP, HP6, HP6 + LT, HP6 + NP, HP6 + NP + LT, HP35, HP35 + LT, HP35 + NP, HP35 + NP + LT, and commercial HP35 (COM). Color (ΔE00) and whiteness index (ΔWID) changes were measured before and 14 days after bleaching. The extracts (culture medium + diffused gel components) collected after the first session were applied to odontoblast-like MDPC-23 cells, which were assessed concerning their viability, oxidative stress, and morphology. The amount of HP diffused through the disks was determined. Data were analyzed by generalized linear models or Kruskal Wallis Tests (α = 5%).  RESULTS: HP6 + NP + LT exhibited ΔE00 and ΔWID higher than HP6 (p < 0.05) and similar to all HP35 groups. HP6 + NP + LT showed the lowest HP diffusion, and the highest cell viability (%) among bleached groups, preserving cell morphology and number of living cells similar to NC and NP. HP6 + LT, HP6 + NP, and HP6 + NP + LT exhibited the lowest cell oxidative stress among bleached groups (p < 0.05). HP35, HP35 + LT, and HP35 (COM) displayed the lowest cell viability. CONCLUSION: HP6 achieved significantly higher color and whiteness index changes when incorporated with nanoparticles and light-irradiated and caused lower cytotoxicity than HP35 gels. The nanoparticles significantly increased cell viability and reduced the hydrogen peroxide diffusion and oxidative stress, regardless of HP concentration. CLINICAL SIGNIFICANCE: Incorporation of co-doped titanium dioxide nanoparticles combined with violet irradiation within the HP6 gel could promote a higher perceivable and acceptable efficacy than HP6 alone, potentially reaching the optimal esthetic outcomes rendered by HP35. This approach also holds the promise of reducing cytotoxic damages and, consequently, tooth sensitivity.

Current landscape of research on whitening toothpastes and their effects on dental hard tissue.

PURPOSE: To explore the latest trends in research on whitening toothpaste and to present the issues and future perspectives of these studies. METHODS: An initial PubMed search was performed, followed by a meticulous manual review. A total of 543 papers were initially retrieved, and 54 final research papers were selected and analyzed through a manual review. RESULTS: The number of studies on whitening toothpastes has significantly increased, and while initial studies primarily focused on the efficacy of various whitening toothpastes, recent studies have shifted towards investigating the potential effects on dental hard tissues such as enamel and dentin. Common active ingredients used in these whitening toothpastes include hydrogen peroxide, activated charcoal, and blue covarine. Most studies have used commercial toothpastes with fixed ingredients rather than experimentally manufactured toothpaste, and it was noted that toothpastes from specific major manufacturers were frequently used. CLINICAL SIGNIFICANCE: Whitening toothpastes should be treated as separate entities based on their active ingredients, and more standardized experimental designs are required for better comparisons. Accurate analysis and labeling of other components of toothpaste are also essential.

Charcoal dentifrices: A laboratory study of their safety and efficacy.

PURPOSE: To compare charcoal-containing dentifrices (CDs) to non-charcoal containing dentifrices (NCDs) through the following experiments: potentially available fluoride, 1-minute fluoride release, pH, cytotoxicity, heavy metals, enamel fluoride uptake (EFU) and relative dentin abrasivity (RDA). METHODS: Nine fluoride dentifrices; six CDs and three NCDs were tested (n= 3) for available fluoride, the amount of fluoride released within 1 minute, pH cytotoxicity, heavy metals, EFU and RDA. Four CDs and 1 NCD contained sodium fluoride (NaF) as the active ingredient whereas two dentifrices contained stannous fluoride (SnF2; 1 CD and 1 NCD), and two dentifrices contained disodium monofluorophosphate (Na2FPO3, or Na2MFP; 1 CD and 1 NCD). Available samples were homogenized and diluted to 1-in-100 in deionized water (DIW). Release samples were prepared as 1-in-4 homogenized dilutions by mass in DIW. Available and release samples were measured in triplicate (n= 3) via fluoride ion-selective electrode (F-ISE) and ion chromatography (IC). ANSI/ADA 130 was followed for pH. L929 cells were cultured using the lactate dehydrogenase (LDH) assay and ISO 10993-5 Annex C MTT cytotoxicity test. Heavy metals testing was performed using a hydrofluoric acid digestion sample preparation method followed by inductively coupled plasma mass spectrometry (ICP-MS) detection. EFU was performed on enamel specimens that underwent treatment with a CD slurry (1-in-4 dilution) following Test Method #40 of FDA Monograph 21. RDA was performed following ISO 11609 Annex A and the Hefferren method. Data was analyzed using one-way ANOVA followed by post-hoc tests (α= 0.05). RESULTS: Available fluoride for all nine dentifrices was between ~93-102% of the labeled amount. The amount of fluoride released after 1 minute of homogenous mixing ranged between 75-107% of the labeled amount. The pH values of the nine dentifrices ranged from 6.5 to 7.7. Charcoal did not significantly contribute to cytotoxicity in L929 cells. The concentrations of each heavy metal (Hg, Cd, As and Pb) present in each of the nine dentifrices were < 1 ppm, indicating trace amounts. The CDs were not significantly more abrasive than the NCDs. The SnF2 CD had the highest EFU value (644.2 ±131.7 ppm) followed by the NaF CD and the Na2MFP CD at 492.2± 69.5 ppm and 140.1± 28.1 ppm, respectively. CLINICAL SIGNIFICANCE: Charcoal-containing dentifrices were not found to be significantly more abrasive or cytotoxic than non-charcoal-containing dentifrices. Charcoal and non-charcoal-containing dentifrices were also found to be comparable through experiments determining their fluoride content, pH, enamel fluoride uptake and heavy metals.

Influence of coffee characteristics on tooth discoloration.

PURPOSE: To evaluate the impact of coffee attributes on tooth discoloration, emphasizing the importance of potential factors such as serving temperature, bean variety, and chlorogenic acid (CGA) content. METHODS: Coffee preparation involved the extraction of espresso from four types of roasted beans (Vietnam Robusta, Uganda Robusta, Ethiopia Yirgacheffe Arabica, and Colombia Supremo Arabica), followed by chlorogenic content analysis using high-performance liquid chromatography. Bovine tooth enamel specimens were carefully prepared and stained with coffee (hot and iced), with a color assessment conducted at different time intervals (3, 9, 24, 48, and 72 hours). The Vickers hardness tester was employed to ensure specimen quality, while spectrophotometry aided in color analysis using the CIEDE2000 formula. RESULTS: The results revealed varying effects of serving temperature, bean type, and CGA content on tooth discoloration. It was demonstrated that perceptible color differences occur after a 3-hour immersion in coffee, with hot coffee showing higher staining potential compared to iced variations. Furthermore, chlorogenic acid content and bean type significantly affected tooth discoloration, with higher chlorogenic acid levels associated with increased staining. Notably, Robusta coffee showed less discoloration compared to Arabica, potentially due to differences in pH levels. CLINICAL SIGNIFICANCE: The findings provide valuable insights for both dental practitioners and coffee consumers, assisting in making informed decisions regarding coffee intake and oral hygiene.

Effect of fluoride or chitosan toothpaste and at-home bleaching in enamel roughness, tooth color, and staining susceptibility.

PURPOSE: To evaluate how fluoride- or chitosan-based toothpaste used during at-home bleaching affects enamel roughness, tooth color, and staining susceptibility. METHODS: Bovine enamel blocks were submitted to a 14-day cycling regime considering a factorial design (bleaching agent x toothpaste, 2 x 3), with n=10: (1) bleaching with 16% carbamide peroxide (CP) or 6% hydrogen peroxide (HP), and (2) daily exposure of a fluoride (1,450 ppm F-NaF) toothpaste (FT), chitosan-based toothpaste (CBT), or distilled water (control). Then, 24 hours after the last day of bleaching procedure the samples were exposed to a coffee solution. Color (ΔEab, ΔE00, L*, a*, b*) and roughness (Ra, µm) analyses were performed to compare the samples initially (baseline), after bleaching, and after coffee staining. The results were evaluated by linear models for repeated measures (L*, a*, b*, and Ra), 2-way ANOVA (ΔEab, ΔE00) and Tukey's test (α= 0.05). RESULTS: After the at-home bleaching procedure (toothpaste vs. time, P< 0.0001), the toothpaste groups presented a statistically lower Ra than the control (CBT 0.05). After coffee exposure, CBT presented lower ΔEab and ΔE00 values in the HP groups (toothpaste, P< 0.0001), and lower b* and a* values in the CP groups (toothpaste vs. time, P= 0.004). CLINICAL SIGNIFICANCE: Fluoride or chitosan delivered by toothpaste can reduce surface alterations of the enamel during at-home bleaching, without affecting bleaching efficacy.

Onset and progression of dental erosion in a mouse model.

OBJECTIVE: Purpose of this research was to examine the onset, progression and wear rates of dental erosion in an established mouse model. MATERIAL AND METHODS: Dental erosion in mice was experimentally induced, and the acidic effects of cola drink on their teeth after 2, 4 and 6-weeks were closely analysed by scanning electron microscopy. The tooth height and enamel or dentin loss were established.  Results: The dental erosion on the molars showed clear progression from 2 to 6 weeks. By the 2-week mark, a significant portion of enamel was already eroded, revealing the dentin on the lingual cusps. When adjusted for attritional wear, molars exposed to cola for 2 weeks showed a 35% drop in lingual tooth height compared to controls (533 µm vs. 818 µm). At 4 and 6 weeks, the cola-exposed group continued to display decreased lingual tooth heights by 40% (476 µm vs. 799 µm) and 43% (440 µm vs. 767 µm), respectively. CONCLUSION: This study revealed significant acidic effects of cola drink on mouse molars as early as 2 weeks. These findings highlight the challenge of monitoring dental erosion clinically and underscore the importance of early preventive and intervention measures.

Biomineralization and remineralizing potential of toothpastes containing nanosized ß-calcium glycerophosphate: an in vitro study.

To evaluate the effect of 1100 ppm F toothpastes supplemented with micrometric or nanosized ß-CaGP (ß-CaGPm/ß-CaGPn) on artificial enamel remineralization, using a pH cycling model. Enamel blocks with artificial caries were randomly allocated into ten groups (n = 10), according to the toothpastes: without fluoride/ß-CaGPm/ß-CaGPn (negative control); 1100 ppm F (1100F); 1100F plus 0.125%, 0.25%, 0.5%, and 1.0% of ß-CaGPm or ß-CaGPn. The blocks were treated 2×/day with slurries of toothpastes. After pH cycling, the percentage of surface hardness recovery (%SHR); integrated loss of subsurface hardness (ΔKHN); integrated mineral loss (ΔIMR); fluoride (F), calcium (Ca), and phosphorus (P) concentrations in the enamel; polydispersity index (PdI); and zeta potential (Zp) were determined. The data were analyzed by ANOVA (p < 0.001). For Zp/PdI, no significance was observed when comparing the means (p > 0.001). The treatment with 1100F-0.25%ß-CaGPn led to %SHR ∼57 higher when compared to the 1100F group (p < 0.001). The lowest ΔKHN was observed for the 1100F-0.25%ß-CaGPn group (p < 0.001). The ΔIMR was lower (∼201%) for the 1100F-0.25%ß-CaGPn when compared to 1100F (p < 0.001). The association of ß-CaGPm and ß-CaGPn to 1100F did not influence its F concentration (p > 0.001). The highest increase in Ca and P was observed for 1100F-0.25%ß-CaGPn (p < 0.001). The addition of 0.25%ß-CaGPn to 1100F toothpaste was able to promote an additional remineralizing effect of artificial caries lesions.

Effect of incorporation of calcium polyphosphate sub-microparticles in low-concentration bleaching gels on physical properties of dental enamel.

AIM: To evaluate the bleaching efficacy and effects on enamel properties of experimental gels with carbamide peroxide (CP; 10%) or hydrogen peroxide (HP; 6%) containing calcium polyphosphate sub-microparticles (CaPPs). METHODS: A total of 216 bovine tooth specimens were divided for microhardness and color analyses (n = 108) and block randomized into nine groups (n = 12): (G1) commercial CP (Whiteness Perfect, FGM; Brazil); (G2) experimental CP; (G3) CP-0.5%CaPPs; (G4) CP-1.5%CaPPs; (G5) commercial HP (Potenza Bianco, PHS; Brazil); (G6) experimental HP; (G7) HP-0.5%CaPPs; (G8) HP-1.5%CaPPs; (G9) artificial saliva. The gels' pH values were determined with a bench pH meter. Color (ΔE, ΔE00, ΔWID) and microhardness variation were evaluated before and after the therapy. Part of the specimens used for microhardness was submitted to the scanning electron microscopy (SEM) (n = 3) and energy-dispersive X-ray spectroscopy EDX (n = 3) analyses. Statistical analyses were performed in the R statistical software (α = 0.05). Linear mixed models for repeated measures in time were used to analyze microhardness and L* values. Generalized linear models were used to analyze the a*, b*, ΔE, ΔE00, and ΔWID, considering a group effect. The EDX data were analyzed using a one-way ANOVA with Tukey's test. RESULTS: The gels' pH remained over 6,0. All gels effectively bleached the specimens and did not differ significantly. When compared to the control group, the hardness was significantly lower in the G1, G2, G6, and G7 groups. The G3, G4, G5, and G8 groups did not differ significantly (p > 0.05). CONCLUSION: The incorporation of CaPPs in low-concentration whitening gels reduces its negative effects on microhardness without interfering with their bleaching efficacy.

Enamel remineralisation prospect of Moringa Oleifera hydrogel, eggshell hydrogel versus sodium fluoride varnish on artificially demineralised primary teeth: in vitro study.

PURPOSE: The purpose of the present in vitro study is to investigate and compare the remineralising potential of Moringa Oleifera extract, eggshell, and sodium fluoride varnish on microhardness of artificially demineralised enamel of primary teeth with biomimetic minimally invasive approach following the world paradigm shift towards natural products in paediatric dentistry. MATERIAL AND METHODS: Sample size included 44 primary molars. The mineral content and surface microhardness of all specimens were initially assessed using energy dispersive x-ray examination (EDX) and Vickers microhardness. The specimens were artificially demineralised for 96 h at a temperature of 37°C and then reassessed directly after demineralisation. The demineralised enamel specimens were randomly divided into four groups according to the remineralisation regimen utilised. Group 1: Artificial saliva (control); Group 2: Sodium fluoride varnish; Group 3: Eggshell hydrogel; and Group 4: Moringa Oleifera hydrogel. The specimens were stored for 8 days and then subsequently evaluated using EDX and microhardness assessment by Vickers microhardness test and scanning electron microscope (SEM).  Results: Regarding the microhardness test, there was a significant difference between the Moringa Oleifera group and Eggshell group compared to fluoride varnish (p < 0.05). Regarding EDX analysis, there was a statistically significant difference (p < 0.05) between Moringa Oleifera group and Eggshell group compared to fluoride varnish as the highest values were for Moringa Oleifera and Eggshell. On the other hand, there was no statistically significant difference (p > 0.05) between Moringa Oleifera and Eggshell in both the measurements. CONCLUSION: Moringa Oleifera and Eggshell might be considered as a biomimetic natural material capable of guiding enamel tissue remineralisation in early carious lesion of primary teeth. CLINICAL RELEVANCE: This research demonstrated the capability for early enamel caries to be remineralised using novel materials with a naturally counterpart implicated in biomineralisation as proved to be more effective than traditionally used fluoride varnish in primary teeth.

Effectiveness and safety of biosilicate-enhanced bleaching gels on enamel with early erosion lesion.

AIM: This study evaluated the efficacy and cytotoxicity of 35% hydrogen peroxide (HP) gel incorporated with 10% (w/w) biosilicate (BioS) on sound enamel and early-stage enamel erosion lesions. METHODS: Discs of enamel/dentin were selected, subjected to erosive cycles (0.3% citric acid, pH 2.6), and treated with (n = 8): HP (35% HP, positive control); HP_BioS [carboxymethyl cellulose (CMC) + HP + BioS]; BioS (CMC + BioS); CMC (negative control). The discs were adapted to artificial pulp chambers with the enamel exposed for bleaching, and the dentin facing toward the culture medium (Dulbecco's modified Eagle's medium [DMEM]). Bleaching was performed in three 30-min sessions at 7-day intervals. After bleaching, the diffusion product (DMEM extract + diffused HP) was pipetted onto MDPC-23 odontoblastic cell line and inoculated. Color parameters (ΔL, Δa, Δb), color change (ΔE00), and changes in whiteness index (ΔWID) were determined before (T0) and after the last bleaching session (T3). Cell viability (MTT, %), H2O2 diffusion (µg/mL), oxidative cell stress (OxS), and cell fluorescence (live/dead assay, in confocal microscopy) were assessed (ANOVA/Tukey; α = 0.05). RESULTS: No difference in ΔL, Δa, Δb, ΔE00, and ΔWID were found between HP and HP_BioS (p > 0.05). The incorporation of BioS decreased the HP diffusion into the substrates and mitigated oxidative stress in early-stage eroded enamel (p < 0.05). HP_BioS presented significantly higher cell viability compared with HP under erosion conditions. Live/dead assay indicated that BioS_HP maintained viability with larger clusters of viable cells. CONCLUSION: Incorporating BioS into HP maintained bleaching effectiveness, favored cell viability, reduced the oxidative stress, and the cytotoxicity in teeth with early-stage erosion. CLINICAL SIGNIFICANCE: BioS formulation showed promising results for reducing cytotoxicity in patients seeking tooth bleaching and presenting undetectable early-stage erosion.

Remineralization efficiency of three different agents on artificially produced enamel lesions: A micro-CT study.

OBJECTIVE: This study aimed to assess the remineralization efficacy of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), silver diamine fluoride/potassium iodide (SDF/KI), and sodium fluoride with functionalized tricalcium phosphate (NaF/fTCP) on artificial early enamel lesion using laser fluorescence and micro-CT analysis. METHODOLOGY: On extracted impacted third molars, artificial enamel lesions were prepared. Twenty-eight specimens were randomly assigned to four groups (n = 7 per group): a control group (artificial saliva), CPP-ACP (GC Tooth Mousse), SDF/KI (Riva Star), and NaF/fTCP (Clinpro White varnish). Following the manufacturer's instructions, the remineralization agents were applied to demineralized surfaces. Laser fluorescence and micro-CT were used to evaluate the remineralization efficacy of the agents and analyzes were performed during four stages: before demineralization, after demineralization, 1st day of remineralization and 30th day of remineralization. Shapiro-Wilk test, repeated measures two-way ANOVA, and Spearman correlation tests were used for statistical analysis. A significant level of p < 0.05 was established. RESULTS: SDF/KI significantly reduced the lesion area and lesion volume on the demineralized enamel surface after 30 days of remineralization. In the T3 period, SDF/KI increased the mineral density statistically significantly compared to the T1 period. The laser fluorescence values for all three remineralizing agents exhibited a linear decrease. A significant correlation between the fluorescence values and the mineral density was found (p = 0.01). CONCLUSION: All three investigated agents were showed positive remineralization efficacy on artificial enamel lesion. However, SDF/KI, containing silver diamine fluoride and potassium iodide exhibited superior than other agents in promoting remineralization. CLINICAL SIGNIFICANCE: Although all three remineralization agents showed positive remineralization efficacy on artificial enamel lesions, SDF had higher remineralization performance over the other two agents. SDF has potential to prevent progression of demineralization in treating children with high caries risk in the long-term.