ABSTRACT
Developing "turn on" fluorescent probes was desirable for the detection of the effective anticoagulant agent heparin in clinical applications. Through combining the aggregation induced emission (AIE) fluorogen tetraphenylethene (TPE) and heparin specific binding peptide AG73, the promising "turn on" fluorescent probe TPE-1 has been developed. Nevertheless, although TPE-1 could achieve the sensitive and selective detection of heparin, the low proteolytic stability and undesirable poor solubility may limit its widespread applications. In this study, seven TPE-1 derived fluorescent probes were rationally designed, efficiently synthesized and evaluated. The stability and water solubility were systematically estimated. Especially, to achieve real-time monitoring of proteolytic stability, the novel Abz/Dnp-based "turn on" probes that employ the internally quenched fluorescent (IQF) mechanism were designed and synthesized. Moreover, the detection ability of synthetic fluorescent probes for heparin were systematically evaluated. Importantly, the performance of d-type peptide fluorescent probe XH-6 indicated that d-type amino acid substitutions could significantly improve the proteolytic stability without compromising its ability of heparin sensing, and attaching solubilizing tag 2-(2-aminoethoxy) ethoxy) acid (AEEA) could greatly enhance the solubility. Collectively, this study not only established practical strategies to improve both the water solubility and proteolytic stability of "turn on" fluorescent probes for heparin sensing, but also provided valuable references for the subsequent development of enzymatic hydrolysis-resistant d-type peptides based fluorescent probes.
Subject(s)
Fluorescent Dyes , Heparin , Peptides , Fluorescent Dyes/chemistry , Fluorescent Dyes/chemical synthesis , Heparin/analysis , Heparin/chemistry , Peptides/chemistry , Peptides/chemical synthesis , Molecular Structure , Humans , Spectrometry, FluorescenceABSTRACT
BACKGROUND: The first purpose of this study was to determine whether a measurement of the level of direct oral anticoagulants (DOACs) was possible with heparin-calibrated chromogenic anti-factor Xa activity (AXA). The second purpose of this study was to evaluate whether the antidote treatment decision level (30 or 50 ng/mL of DOAC) can be determined by unfractionated heparin (UHF)/low molecular weight heparin (LMWH)-calibrated AXA. METHODS: AXA was measured by using two reagents and dedicated analyzers (Sysmex CS-5100 analyzer and STA R Max3). Four types of calibrators were used: 1) Stago DOAC (rivaroxaban, edoxaban, and apixaban)-specific calibrator, 2) Stago LMWH calibrator, 3) Sysmex UHF calibrator, and 4) Sysmex LMWH calibrator. Regression analysis was used between assays. Receiver operating characteristic (ROC) curves were performed, and the concordance rate was calculated. RESULTS: The correlation coefficients were in the range of 0.75 - 0.91 for rivaroxaban and 0.81 - 0.94 for apixaban. The correlation coefficient between edoxaban-calibrated AXA and Sysmex LMWH/Sysmex UHF calibrator-calibrated AXA was low (r = 0.47). Overall correlation between DOAC-calibrated AXA and Stago LMWH-calibrated AXA was linear, at only low concentration in all three DOACs. The concordance rate (89.3 - 100%) is good for de-termining the antidote management level by UFH/LMWH-calibrated AXA, compared with those of DOAC-calibrated AXA in rivaroxaban and apixaban. The concordance rate ranged from 63% to 67% between Sysmex UFH/ LMWH-calibrated AXA and edoxaban-calibrated AXA. CONCLUSIONS: The findings of our study suggest limitations in calculating accurate concentrations, when using UFH/LMWH-calibrated AXA to measure DOAC. This study demonstrates that UFH/LMWH-calibrated AXA may be useful in determining the presence of DOACs at the cutoff level for the antidote treatment in rivarovaban and apixaban. However, in edoxaban, UFH/LMWH-calibrated AXA could not accurately measure the presence of DOACs at the cutoff for antidote treatment.
Subject(s)
Factor Xa Inhibitors , Heparin , Pyrazoles , Pyridines , Pyridones , Rivaroxaban , Thiazoles , Pyridones/analysis , Humans , Pyrazoles/analysis , Rivaroxaban/blood , Rivaroxaban/analysis , Factor Xa Inhibitors/pharmacology , Calibration , Heparin/analysis , Anticoagulants/pharmacology , Anticoagulants/analysis , ROC Curve , Reproducibility of Results , Blood Coagulation Tests/methods , Blood Coagulation Tests/instrumentation , Blood Coagulation Tests/standards , Drug Monitoring/methods , Drug Monitoring/instrumentationABSTRACT
Naturally occurring adeno-associated virus (AAV) serotypes that bind to ligands such as AVB sepharose or heparin can be purified by affinity chromatography, which is a more efficient and scalable method than gradient ultracentrifugation. Wild-type AAV8 does not bind effectively to either of these molecules, which constitutes a barrier to using this vector when a high throughput design is required. Previously, AAV8 was engineered to contain a SPAKFA amino acid sequence to facilitate purification using AVB sepharose resin; however, in vivo studies were not conducted to examine whether these capsid mutations altered the transduction profile. To address this gap in knowledge, a mutant AAV8 capsid was engineered to bind to AVB sepharose and heparan sulfate (AAV8-AVB-HS), which efficiently bound to both affinity columns, resulting in elution yields of >80% of the total vector loaded compared to <5% for wild-type AAV8. However, in vivo comparison by intramuscular, intravenous, and intraperitoneal vector administration demonstrated a significant decrease in AAV8-AVB-HS transduction efficiency without alteration of the transduction profile. Therefore, although it is possible to engineer AAV capsids to bind various affinity ligands, the consequences associated with mutating surface exposed residues have the potential to negatively impact other vector characteristics including in vivo potency and production yield. This study demonstrates the importance of evaluating all aspects of vector performance when engineering AAV capsids.
Subject(s)
Capsid , Heparin , Capsid/metabolism , Sepharose/analysis , Sepharose/metabolism , Transduction, Genetic , Heparin/analysis , Heparin/metabolism , Genetic Vectors/genetics , Capsid Proteins/genetics , Capsid Proteins/metabolism , Dependovirus/geneticsABSTRACT
Heparin, an anionic biomacromolecule, is routinely used as an anticoagulant during medical surgery to prevent blood clot formation and in the treatment of several heart, lung, and circulatory disorders having a higher risk of blood clotting. We herein report supramolecular polymeric nanoassemblies of cationic pyrene-tagged bis-imidazolium amphiphiles for heparin detection with high sensitivity and selectivity in aqueous buffer, plasma, and serum media. The nano-assemblies exhibited cyan-green excimeric emission in aqueous media, and their multivalent array of positive surface charges allowed them to form co-assemblies with heparin, resulting in significantly enhanced emission. This provided a convenient method for heparin detection in buffer at nanomolar concentrations, and most notably, a ratiometric fluorescence response was obtained even in highly competitive 100% human serum and 100% human plasma in a clinically relevant concentration range. Moreover, using the heparin-based luminescent co-assemblies, protamine sulfate, a clinically administered antidote to heparin, was also detected in 100% human serum and 100% human plasma at sub-micromolar concentrations.
Subject(s)
Blood Chemical Analysis , Heparin , Protamines , Humans , Anticoagulants/pharmacology , Blood Coagulation , Heparin/analysis , Heparin/pharmacology , Luminescence , Polymers/pharmacology , Protamines/analysis , Protamines/pharmacology , Blood Chemical Analysis/methods , Serum/chemistry , Plasma/chemistry , BuffersABSTRACT
Mitochondrial content has been reported outside of cells either within extracellular vesicles (EVs) or as free mitochondria. Mitochondrial EVs can potentially play multiple physiological and pathophysiological roles. To understand their functions, isolation protocols to separate mitochondrial EVs from other mitochondrial content need to be established. In the present work, we use a multiple reaction monitoring assay with isotope labeled internal standards to quantify 11 mitochondrial, 6 plasma membrane-specific, 4 endosomal membrane-specific, and 2 soluble proteins to evaluate the efficiency of chromatographic isolation of mitochondrial EVs. The isolation protocol includes ultracentrifugation, size exclusion chromatography, and chromatography on immobilized heparin. All protein concentrations were normalized to the concentration of ATP synthase alpha subunit to generate a ratio that allows comparison of different samples obtained during the isolation. We have shown that initial samples after ultracentrifugation are contaminated with non-EV mitochondrial content that cannot be separated from EVs using size exclusion chromatography, but can be efficiently separated from EVs on the column with immobilized heparin.
Subject(s)
Extracellular Vesicles , Extracellular Vesicles/chemistry , Chromatography, Gel , Mitochondria , Heparin/analysis , UltracentrifugationABSTRACT
AIM: The study objective was to evaluate the performance of sthemO 301 system and to compare it with the analyzer used in our university hospital laboratory (STA R MaxĀ® 2), for a selection of hemostasis parameters. METHODS: Method comparison (according to CLSI EP09-A3), carryover (according to CLSI H57-A), APTT sensitivity to heparin (according to CLSI H47-A2), HIL level assessment, and productivity were performed using leftover samples from our laboratory (n > 1000). Commercial quality control materials were used to evaluate precision (according to CLSI EP15-A3) and accuracy. The assays tested on sthemO 301 were: PT, APTT (silica and kaolin activators), fibrinogen (Fib), thrombin time (TT), chromogenic and clotting protein C (PC) activity, and von Willebrand factor antigen (VWF:Ag) levels. RESULTS: All intra-assay and inter-assay precision CVs were below the maximal precision limit proposed by the French Group for Hemostasis and Thrombosis (GFHT). Accuracy was verified with bias below GFHT criteria and most Z-scores were between -2 and +2. No clinically relevant carryover was detected. Silica APTT reagent sensitivity to unfractionated heparin was moderate, as expected. Productivity results were consistent over the 10 repeats performed. The overall agreement between the two systems was excellent for all assays, with Spearman rank correlation coefficient all above 0.9 and slopes of Passing-Bablok correlation near 1 and intercepts close to 0. CONCLUSION: For the methods tested, sthemO 301 system met all the criteria to implement a novel coagulation analyzer in the laboratory and result comparability with STA R MaxĀ® 2 was good.
Subject(s)
Blood Coagulation Tests , Laboratories, Clinical , Humans , Blood Coagulation Tests/instrumentation , Heparin/analysis , Quality Control , Reproducibility of Results , Sensitivity and Specificity , Laboratories, Clinical/standardsABSTRACT
Antiplatelet and anticoagulant drugs are classified antithrombotic agents with the purpose to reduce blood clot formation. For a successful treatment of many known complex cardiovascular diseases driven by platelet and/or coagulation activity, the need of more than one antithrombotic agent is inevitable. However, combining drugs with different mechanisms of action enhances risk of bleeding. Dual anticoagulant and antiplatelet (APAC), a novel semisynthetic antithrombotic molecule, provides both anticoagulant and antiplatelet properties in preclinical studies. APAC is entering clinical studies with this new exciting approach to manage cardiovascular diseases. For a better understanding of the biological function of APAC, comprehensive knowledge of its structure is essential. In this study, atomic force microscopy (AFM) was used to characterize APAC according to its structure and to investigate the molecular interaction of APAC with von Willebrand factor (VWF), since specific binding of APAC to VWF could reduce platelet accumulation at vascular injury sites. By the optimization of drop-casting experiments, we were able to determine the volume of an individual APAC molecule at around 600 nm3, and confirm that APAC forms multimers, especially dimers and trimers under the experimental conditions. By studying the drop-casting behavior of APAC and VWF individually, we depictured their interaction by using an indirect approach. Moreover, in vitro and in vivo conducted experiments in pigs supported the AFM results further. Finally, the successful adsorption of APAC to a flat gold surface was confirmed by using photothermal-induced resonance, whereby attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) served as a reference method.
Subject(s)
Anticoagulants/analysis , Heparin/analogs & derivatives , Microscopy, Atomic Force/methods , Platelet Aggregation Inhibitors/analysis , Proteoglycans/analysis , Heparin/analysis , Humans , Spectroscopy, Fourier Transform Infrared/methodsABSTRACT
Glycosaminoglycans (GAGs) contribute to the treatment of many human diseases, especially in the field of thrombosis, because of their anticoagulant activity. GAGs interrupt the coagulation process by interacting with multiple coagulation factors through defined sequences within their linear and negatively charged chains, which are not fully elucidated. Numerous methods have been developed to characterize the structure of pharmaceutical GAGs, including intravenously or subcutaneously administered heparin and orally administered sulodexide. However, most currently available methods only focus on the oligosaccharide portion or analyze the whole mixture because longer-chain polysaccharides are extremely difficult to resolve by chromatographic separation. We have established two novel electrophoresis-mass spectrometry methods to provide a panoramic view of the structures of pharmaceutical GAGs. In the first method, an in-gel digestion procedure was developed to recover GAGs from the polyacrylamide gels, while in the second method, a strong anion exchange ultrafiltration procedure was developed to extract multiple GAG species from the agarose gels. Both procedures are compatible with liquid chromatography-tandem mass spectrometry, and structural information, such as disaccharide composition and chain length, can be revealed for each GAG fraction. The applications of these two methods on analysis of two different GAG drugs, heparin and sulodexide, were demonstrated. The current study offers the first robust tool to directly elucidate the structure of larger GAG chains with more biological importance rather than obtaining a vague picture of all chains as a mixture, which is fundamental for better understanding the structure-activity relationship and quality control of the GAG drugs.
Subject(s)
Glycosaminoglycans/analysis , Heparin/analysis , Administration, Oral , Chromatography, Liquid , Electrophoresis , Glycosaminoglycans/administration & dosage , Heparin/administration & dosage , Humans , Injections, Intravenous , Injections, Subcutaneous , Tandem Mass SpectrometryABSTRACT
Oviductus ranae (O.ran.) has been widely used as a tonic and a traditional animal-based Chinese medicine. O.ran. extracts have been reported to have numerous biological activities, including activities that are often associated with mammalian glycosaminoglycans such as anti-inflammatory, antiosteoperotic, and anti-asthmatic. Glycosaminoglycans are complex linear polysaccharides ubiquitous in mammals that possess a wide range of biological activities. However, their presence and possible structural characteristics within O.ran. were previously unknown. In this study, glycosaminoglycans were isolated from O.ran. and their disaccharide compositions were analyzed by liquid chromatography-ion trap/time-of-flight mass spectrometry (LC-MS-ITTOF). Heparan sulfate (HS)/heparin (HP), chondroitin sulfate (CS)/dermatan sulfate (DS) and hyaluronic acid (HA) were detected in O.ran. with varied disaccharide compositions. HS species contain highly acetylated disaccharides, and have various structures in their constituent chains. CS/DS chains also possess a heterogeneous structure with different sulfation patterns and densities. This novel structural information could help clarify the possible involvement of these polysaccharides in the biological activities of O.ran..
Subject(s)
Glycosaminoglycans/analysis , Glycosaminoglycans/chemistry , Materia Medica/chemistry , Chondroitin Sulfates/analysis , Chromatography, Liquid , Dermatan Sulfate/analogs & derivatives , Dermatan Sulfate/analysis , Disaccharides/analysis , Disaccharides/isolation & purification , Glycosaminoglycans/isolation & purification , Heparin/analysis , Heparitin Sulfate/analysis , Mass Spectrometry/methods , Sensitivity and SpecificityABSTRACT
Heparin has a variety of pharmacological uses, including applications for anti-tumor metastasis, anti-inflammatory and anti-viral activities and is widely used as a clinical anticoagulant. Due to its widespread applications in the clinical procedures, monitoring heparin levels is critically important to ensure the safe use of heparin and to prevent overdose and complications, such as hemorrhage and thrombocytopenia. However, traditional heparin detection relies on the measurements of the activated clotting time or activated partial thromboplastin time, which are not sufficiently reliable or accurate measurements for certain clinical settings. In this work, we describe a dumbbell probe-aided strategy for ultrasensitive and isothermal detection of heparin based on a uniquely strong protamine-heparin interaction and rolling circle amplification driven signal amplification. The detection limit for heparin is 12.5 ng mL-1 (0.83 nM), which is much lower than the therapeutic level of heparin in cardiovascular surgery (17-67 ĀµM) and in postoperative and long-term treatment (1.7-10 ĀµM). Additionally, the proposed sensing platform works well for heparin monitoring in human plasma samples. This simple and ultrasensitive heparin biosensor has potential application in diagnostics, therapeutics, and in biological research.
Subject(s)
Biosensing Techniques/methods , Heparin/analysis , Limit of Detection , Nucleic Acid Amplification Techniques , Heparin/blood , Humans , Spectrometry, FluorescenceABSTRACT
BACKGROUND: Double J ureteral stents are widely used on urological patients to provide drainage of the upper urinary tract. Unfourtunately, ureteral stents are not free from complications, as bacterial colonization and require a second procedure for removal. The purpose of the current comparative experimental study is to evaluate a new heparin-coated biodegradable antireflux ureteral stent (BraidStentĀ®-H) to prevent urinary bacterial colonization. METHODS: A total of 24 female pigs were underwent determination of bacteriuria and nephrosonographic, endoscopic and contrast fluoroscopy assessment of the urinary tract. Afterward, were randomly assigned animals to Group-I, in which a 5Fr double-pigtail ureteral stent was placed for 6Ā weeks, or Group-II, in which a BraidStentĀ®-H was placed. Follow-up assessments were performed at 1, 3, 6, 8, 12Ā weeks. The final follow-up includes the above methods and an exhaustive pathological study of the urinary tract was accomplished after 20Ā weeks. RESULTS: Bacteriuria findings in the first 48Ā h were significant between groups at 6Ā h and 12Ā h. Asymptomatic bacteriuria does not reach 100% of the animals in Group-II until 48Ā h versus Group-I where it appears at 6Ā h. The weekly bacteriuria mean rate was 27.7% and 44.4% in Group I and II respectively, without statistical significance. In Group II there were no animals with vesicoureteral reflux, with statistical significance at 3 and 6Ā weeks with Group-I. The 91.2% of stents in Group-II were degraded between 3 and 6Ā weeks, without obstructive fragments. Distal ureteral peristalsis was maintained in 66.6-75% in Group-II at 1-6Ā weeks. CONCLUSIONS: The heparin coating of BraidStentĀ® allows an early decrease of bacterial colonization, but its effectiveness is low at the long term. Heparin coating did not affect scheduled degradation rate or size of stents fragments. BraidStentĀ®-H avoids the side effects associated with current ureteral stents, thus should cause less discomfort to patients.
Subject(s)
Bacteriuria/prevention & control , Drug-Eluting Stents , Heparin/analysis , Ureter/surgery , Vesico-Ureteral Reflux/prevention & control , Absorbable Implants , Animals , Disease Models, Animal , Female , Random Allocation , SwineABSTRACT
Understanding molecular mechanisms governing interactions of glycosaminoglycans (such as heparin) with proteins remains challenging due to their enormous structural heterogeneity. Commonly accepted approaches seek to reduce the structural complexity by searching for "binding epitopes" within the limited subsets of short heparin oligomers produced either enzymatically or synthetically. A top-down approach presented in this work seeks to preserve the chemical diversity displayed by heparin by allowing the longer and structurally diverse chains to interact with the client protein. Enzymatic lysis of the protein-bound heparin chains followed by the product analysis using size exclusion chromatography with online mass spectrometry detection (SEC/MS) reveals the oligomers that are protected from lysis due to their tight association with the protein, and enables their characterization (both the oligomer length, and the number of incorporated sulfate and acetyl groups). When applied to a paradigmatic heparin/antithrombin system, the new method generates a series of oligomers with surprisingly distinct sulfation levels. The extent of sulfation of the minimal-length binder (hexamer) is relatively modest yet persistent, consistent with the notion of six sulfate groups being both essential and sufficient for antithrombin binding. However, the masses of longer surviving chains indicate complete sulfation of disaccharides beyond the hexasaccharide core. Molecular dynamics simulations confirm the existence of favorable electrostatic interactions between the high charge-density saccharide residues flanking the "canonical" antithrombin-binding hexasaccharide and the positive patch on the surface of the overall negatively charged protein. Furthermore, electrostatics may rescue the heparin/protein interaction in the absence of the canonical binding element.
Subject(s)
Antithrombins/chemistry , Heparin/analysis , Polysaccharide-Lyases/chemistry , Antithrombins/metabolism , Bacteroides/enzymology , Chromatography, Gel , Heparin/metabolism , Humans , Mass Spectrometry , Molecular Dynamics Simulation , Polysaccharide-Lyases/metabolism , Printing, Three-Dimensional , SolutionsABSTRACT
Interactions between heparin and tetraarginine in an acidic background electrolyte were investigated in capillary electrophoresis. The results showed that tetraarginine and heparin form a stable complex that migrates toward the anode immediately after coming into contact. When a zone of tetraarginine at a mg/mL concentration level passes through a zone of heparin at a Āµg/mL concentration level, tetraarginine is gradually removed by the formation of the complex that migrates in the opposite direction, thereby decreasing the tetraarginine peak area. The variation of the tetraarginine peak area as a function of the unfractionated heparin concentration was linear within the range 2-20Ā Āµg/mL, which enables us to detect and determine heparin concentrations undetectable with a UV detector. The same behavior was confirmed for low molecular weight heparin.
Subject(s)
Arginine/chemistry , Electrophoresis, Capillary/methods , Heparin/chemistry , Arginine/analysis , Heparin/analysisABSTRACT
Complete heparin digestion with heparin lyase I and II results in a mixture of hexasaccharides and tetrasaccharides with 3-O-sulfo group-containing glucosamine residues at their reducing ends. Because these tetrasaccharides are derived from antithrombin III-binding sites of heparin, we examined whether this method could be applied to estimate the anticoagulant activity of heparin. Therefore, this paper presents a new low molecular weight heparin sample preparation method-chemical depolymerization. Qualitative analysis of the studied compounds and a comparison of their composition are an important contribution to the structural analysis of low molecular weight heparins, which has not been fully conducted so far. Qualitative on-line liquid chromatography-mass spectrometric analysis of these resistant oligosaccharides is also described in this paper.
Subject(s)
Glucosamine/metabolism , Heparin Lyase/metabolism , Heparin/analysis , Heparin/metabolism , Oligosaccharides/metabolism , Chromatography, High Pressure Liquid , Flavobacterium/enzymology , Glucosamine/chemistry , Heparin Lyase/chemistry , Molecular Weight , Oligosaccharides/chemistry , Quality Control , Spectrometry, Mass, Electrospray IonizationABSTRACT
BACKGROUND: Coagulation panels are ordered for a variety of conditions in the emergency department (ED). OBJECTIVE: This narrative review evaluates specific conditions for which a coagulation panel is commonly ordered but has limited utility in medical decision-making. DISCUSSION: Coagulation panels consist of partial thromboplastin time (PTT) or activated partial thromboplastin time (aPTT), prothrombin time (PT), and international normalized ratio (INR). These tests evaluate the coagulation pathway which leads to formation of a fibrin clot. The coagulation panel can monitor warfarin and heparin therapy, evaluate for vitamin K deficiency, evaluate for malnutrition or severe systemic disease, and assess hemostatic function in the setting of bleeding. The utility of coagulation testing in chest pain evaluation, routine perioperative assessment, prior to initiation of anticoagulation, and as screening for admitted patients is low, with little to no change in patient management based on results of these panels. Coagulation testing should be considered in systemically ill patients, those with a prior history of bleeding or family history of bleeding, patients on anticoagulation, or patients with active hemorrhage and signs of bleeding. Thromboelastography and rotational thromboelastometry offer more reliable measures of coagulation function. CONCLUSIONS: Little utility for coagulation assessment is present for the evaluation of chest pain, routine perioperative assessment, initiation of anticoagulation, and screening for admitted patients. However, coagulation panel assessment should be considered in patients with hemorrhage, patients on anticoagulation, and personal history or family history of bleeding.
Subject(s)
Anticoagulants/analysis , Blood Coagulation Tests/standards , Emergency Medicine/methods , Anticoagulants/therapeutic use , Blood Coagulation Tests/methods , Blood Coagulation Tests/statistics & numerical data , Chest Pain/blood , Chest Pain/diagnosis , Emergency Service, Hospital/organization & administration , Heparin/analysis , Heparin/therapeutic use , Humans , International Normalized Ratio/methods , International Normalized Ratio/standards , Intraoperative Complications/blood , Intraoperative Complications/diagnosis , Partial Thromboplastin Time/methods , Partial Thromboplastin Time/standards , Prothrombin Time/methods , Prothrombin Time/standards , Warfarin/analysis , Warfarin/therapeutic useABSTRACT
Heparins are linear sulfated polysaccharides widely used as anticoagulant drugs. Their nonreducing-end (NRE) has been little investigated due to challenges in their characterization, but is known to be partly generated by enzymatic cleavage with heparanases, resulting in N-sulfated glucosamines at the NRE. Uronic NRE (specifically glucuronic acids) have been isolated from porcine heparin, with GlcA-GlcNS,3S,6S identified as a porcine-specific NRE marker. To further characterize NRE in heparinoids, a building block analysis involving exhaustive heparinase digestion and subsequent reductive amination with sulfanilic acid was performed. This study describes a new method for identifying heparin classical building blocks and novel NRE building blocks using strong anion exchange chromatography on AS11 columns for the assay, and ion-pair liquid chromatography-mass spectrometry for building block identification. Porcine, ovine, and bovine intestine heparins were analyzed. Generally, NRE on these three heparins are highly sulfated moieties, particularly with 3-O sulfates, and the observed composition of the NRE is highly dependent on heparin origin. At the highest level of specificity, the isolated marker was only detected in porcine heparin. However, the proportion of glucosamines in the NRE and the proportion of glucuronic/iduronic configurations in the NRE uronic moieties greatly varied between heparin types.
Subject(s)
Anticoagulants/analysis , Anticoagulants/chemistry , Heparin/analysis , Heparin/chemistry , Animals , Catalysis , Glucuronidase , Species Specificity , Spectrum Analysis , Structure-Activity Relationship , Sulfanilic Acids/chemistryABSTRACT
Hierarchical self-assembly (HAS) is a multilevel organization process that first assembles elementary molecular units into ordered secondary structures via noncovalent interactions, which further act as the building blocks to form more complex multifunctional superstructures at the next level(s). The HAS strategy has been used as a versatile method for the preparation of soft-matter nanoarchitectures of defined size and morphologies, tunable luminescence, and biological importance. However, such preparation can be greatly simplified if well-defined dynamic structures are employed as the cores that upon linking form the desired nanoarchitectures. Discrete supramolecular coordination complexes (SCCs) with well-defined shapes, sizes, and internal cavities have been widely employed to construct hierarchical systems with functional diversity. This Account summarizes the prevailing strategies used in recent years in the preparation of SCC-based HASs and illustrates how the combination of dynamic metal-ligand coordination with other interactions was used to obtain hierarchical systems with interesting properties. HASs with dual orthogonal interactions involving coordination-driven self-assembly and hydrogen bonding/host-guest interaction generally result in robust and flexible supramolecular gels. Likewise, hybridization of SCCs with a suitable dynamic covalent network via a hierarchical strategy is useful to prepare materials with self-healing properties. The intrinsic positive charges of the SCCs also make them suitable precursors for the construction of HASs via electrostatic interactions with negatively charged biological/abiological molecules. Furthermore, the interplay between the hydrophilic and lipophilic characters of HASs by varying the number and spacial orientation of alkyl/oxyethylene chains of the SCC is a simple yet controllable approach to prepare ordered and tunable nanostructures. Certain SCC-cored hierarchical systems exhibit reversible polymorphism, typically between micellar, nanofiber, and vesicular phases, in response to various external perturbations: heat, photoirradiation, pH-variance, redox-active agents, etc. At the same time, multiple noncovalent interaction mediated HASs are growing in numbers and are promising candidates for obtaining functionally diverse materials. The photophysical properties of SCC-based HASs have been used in many analytical applications. For example, embedding tetraphenylethene (TPE)-based pyridyl ligands within metallo-supramolecular structures partially restricts the molecular rotations of its phenyl rings, endowing the resultant SCCs with weak emissions. Further aggregation of such HASs in suitable solvents results in a marked enhancement in emission intensity along with quantum yields. They act as sensitive sensors for different analytes, including pathogens, drugs, etc. HASs are also useful to develop multidrug systems with cooperative chemotherapeutic effects. Hence, the use of HASs with theranostic SCCs combining cell-imaging agents and chemotherapeutic scaffolds is a promising drug delivery strategy for cancer theranostics. At the same time, their responsiveness to stimuli, oftentimes due to the dynamic nature of the metal-ligand interactions, play an important role in drug release via a disassembly mechanism.
Subject(s)
Coordination Complexes/chemistry , Polymers/chemistry , Boron Compounds/chemistry , Doxorubicin/chemistry , Drug Carriers/chemistry , Drug Liberation , Heparin/analysis , Hydrogen Bonding , Hydrophobic and Hydrophilic Interactions , Ligands , Metals, Heavy/chemistry , Molecular Structure , Rhodamines/chemistry , Static Electricity , Tobacco Mosaic Virus/chemistryABSTRACT
Colla corii asini (CCA) made from donkey-hide has been widely used as a health-care food and an ingredient of traditional Chinese medicine. Heparan sulfate (HS)/heparin is a structurally complex class of glycosaminoglycans (GAGs) that have been implicated in a wide range of biological activities. However, their presence within CCA, and their possible structural characteristics, were previously unknown. In this study, GAG fractions containing HS/heparin were isolated from CCA and their disaccharide compositions were analyzed by high sensitivity liquid chromatography-ion trap/time-of-flight mass spectrometry (LC-MS-ITTOF). This revealed that, in addition to the eight commonly seen HS disaccharides, the four rare N-unsubstituted disaccharides were also detected in significant quantities. The disaccharide compositions varied significantly between HS/heparin fractions indicating chains with differing domain structures. This novel structural information may lead to a better understanding of the biological activities (i.e. anticoagulation and antitumor action) of CCA.
Subject(s)
Gelatin/chemistry , Heparin/chemistry , Heparitin Sulfate/chemistry , Heparin/analysis , Heparitin Sulfate/analysis , Spectrometry, Mass, Electrospray IonizationABSTRACT
A biological medicine (or biologicals) is a term for a medicinal compound that is derived from a living organism. By their very nature, they are complex and often heterogeneous in structure, composition and biological activity. Some of the oldest pharmaceutical products are biologicals, for example insulin and heparin. The former is now produced recombinantly, with technology being at a point where this can be considered a defined chemical entity. This is not the case for the latter, however. Heparin is a heterogeneous polysaccharide that is extracted from the intestinal mucosa of animals, primarily porcine, although there is also a significant market for non-porcine heparin due to social and economical reasons. In 2008 heparin was adulterated with another sulfated polysaccharide. Unfortunately this event was disastrous and resulted in a global public health emergency. This was the impetuous to apply modern analytical techniques, principally NMR spectroscopy, and multivariate analyses to monitor heparin. Initially, traditional unsupervised multivariate analysis (principal component analysis (PCA)) was applied to the problem. This was able to distinguish animal heparins from each other, and could also separate adulterated heparin from what was considered bona fide heparin. Taught multivariate analysis functions by training the analysis to look for specific patterns within the dataset of interest. If this approach was to be applied to heparin, or any other biological medicine, it would have to be taught to find every possible alien signal. The opposite approach would be more efficient; defining the complex heterogeneous material by a library of bona fide spectra and then filtering test samples with these spectra to reveal alien features that are not consistent with the reference library. This is the basis of an approach termed spectral filtering, which has been applied to 1D and 2D-NMR spectra, and has been very successful in extracting the spectral features of adulterants in heparin, as well as being able to differentiate supposedly biosimilar products. In essence, the filtered spectrum is determined by subtracting the covariance matrix of the library spectra from the covariance matrix of the library spectra plus the test spectrum. These approaches are universal and could be applied to biological medicines such as vaccine polysaccharides and monoclonal antibodies.
Subject(s)
Biological Products/analysis , Heparin/analysis , Animals , Cattle , Multivariate Analysis , Nuclear Magnetic Resonance, Biomolecular , SwineABSTRACT
Protamine and heparin are the most important polyionic drugs used during surgeries and extracorporeal therapies. In this article, a selective and sensitive fluorescence method for the detection of both protamine and heparin was developed by using bovine serum albumin stabilised copper nanoclusters. Blue emitting fluorescent copper nanoclusters were synthesized in aqueous solution using bovine serum albumin as a capping agent and a reducing agent. A one pot microwave assisted method was adopted to synthesize fluorescent copper nanoclusters showing emission at 410 nm upon excitation at 330 nm. The fluorescence of copper nanoclusters was found to be enhanced after the addition of protamine and the limit of detection obtained is 0.12 ng mL-1. The significant enhancement in fluorescence can be attributed to the electrostatic interactions between the copper nanocluster and protamine. In contrast, the enhanced fluorescence intensity of the copper nanocluster with protamine added was decreased after the addition of heparin, and the copper nanocluster regained its original fluorescence intensity. This can be attributed to the strong interaction of protamine with heparin and the limit of detection was calculated as 0.0406 ng mL-1. The selectivity and sensitivity of the sensor for both protamine and heparin were also determined in the presence of potentially co-existing biomolecules, cations, and anions and satisfactory results were obtained. Additionally the validity of the proposed protamine and heparin sensor was attested in real sample matrices such as human urine samples and human blood serum samples. The results exhibited that the recovery percentage of protamine and heparin reached 98-99% and 92-99% in urine samples and 97-99% in serum samples.