Inactivation of Escherichia coli, Bacteriophage MS2, and Bacillus Spores under UV/H2O2 and UV/Peroxydisulfate Advanced Disinfection Conditions.

Ultraviolet light (UV) combined with peroxy chemicals, such as H2O2 and peroxydisulfate (PDS), have been considered potentially highly effective disinfection processes. This study investigated the inactivation of Escherichia coli, bacteriophage MS2, and Bacillus subtilis spores as surrogates for pathogens under UV/H2O2 and UV/PDS conditions, with the aim to provide further understanding of UV-based advanced disinfection processes (ADPs). Results showed that one additional log of inactivation of E. coli was achieved with 0.3 mM H2O2 or PDS at 5.2 × 10(-5) Einstein·L(-1) photo fluence (at 254 nm) compared with UV irradiation alone. Addition of H2O2 and PDS greatly enhanced the inactivation rate of MS2 by around 15 folds and 3 folds, respectively, whereas the inactivation of B. subtilis spores was slightly enhanced. Reactive species responsible for the inactivation were identified to be •OH, SO4(·-), and CO3(·-) based on manipulation of solution conditions. The CT value of each reactive species was calculated with respect to each microbial surrogate, which showed that the disinfection efficacy ranked as •OH > SO4(·-) > CO3(·-) ≫ O2(·-)/HO2(·). A comprehensive dynamic model was developed and successfully predicted the inactivation of the microbial surrogates in surface water and wastewater matrices. The concepts of UV-efficiency and EE/O were employed to provide a cost-effective evaluation for UV-based ADPs. Overall, the present study suggests that it will be beneficial to upgrade UV disinfection to UV/H2O2 ADP for the inactivation of viral pathogens.

Comparison of UV-Induced Inactivation and RNA Damage in MS2 Phage across the Germicidal UV Spectrum.

Polychromatic UV irradiation is a common method of pathogen inactivation in the water treatment industry. To improve its disinfection efficacy, more information on the mechanisms of UV inactivation on microorganisms at wavelengths throughout the germicidal UV spectrum, particularly at below 240 nm, is necessary. This work examined UV inactivation of bacteriophage MS2, a common surrogate for enteric pathogens, as a function of wavelength. The bacteriophage was exposed to monochromatic UV irradiation from a tunable laser at wavelengths of between 210 nm and 290 nm. To evaluate the mechanisms of UV inactivation throughout this wavelength range, RT-qPCR (reverse transcription-quantitative PCR) was performed to measure genomic damage for comparison with genomic damage at 253.7 nm. The results indicate that the rates of RNA damage closely mirror the loss of viral infectivity across the germicidal UV spectrum. This demonstrates that genomic damage is the dominant cause of MS2 inactivation from exposure to germicidal UV irradiation. These findings contrast those for adenovirus, for which MS2 is used as a viral surrogate for validating polychromatic UV reactors.

Conceptual model and experimental framework to determine the contributions of direct and indirect photoreactions to the solar disinfection of MS2, phiX174, and adenovirus.

Sunlight inactivates waterborne viruses via direct (absorption of sunlight by the virus) and indirect processes (adsorption of sunlight by external chromophores, which subsequently generate reactive species). While the mechanisms underlying these processes are understood, their relative importance remains unclear. This study establishes an experimental framework to determine the kinetic parameters associated with a virus' susceptibility to solar disinfection and proposes a model to estimate disinfection rates and to apportion the contributions of different inactivation processes. Quantum yields of direct inactivation were determined for three viruses (MS2, phiX174, and adenovirus), and second-order rate constants associated with indirect inactivation by four reactive species ((1)O2, OH(•), CO3(•-), and triplet states) were established. PhiX174 exhibited the greatest quantum yield (1.4 × 10(-2)), indicating that it is more susceptible to direct inactivation than MS2 (2.9 × 10(-3)) or adenovirus (2.5 × 10(-4)). Second-order rate constants ranged from 1.7 × 10(7) to 7.0 × 10(9) M(-1) s(-1) and followed the sequence MS2 > adenovirus > phiX174. A predictive model based on these parameters accurately estimated solar disinfection of MS2 and phiX174 in a natural water sample and approximated that of adenovirus within a factor of 6. Inactivation mostly occurred by direct processes, though indirect inactivation by (1)O2 also contributed to the disinfection of MS2 and adenovirus.

Improving the Visible Light Photoactivity of Supported Fullerene Photocatalysts through the Use of [C70] Fullerene.

We herein present the first instance of employing [C70] fullerene for photocatalytic ¹O2 production in water, through covalent immobilization onto a mesoporous silica support via nucelophilic amine addition directly to fullerene's cage. This attachment approach prevents the aggregation of individual fullerene molecules in water, thus allowing fullerene to retain its photoactivity, yet is much less complex than other techniques commonly pursued to create such supported-fullerene materials, which typically rely on water-soluble fullerene derivatives and elaborate immobilization methods. The solid-supported C70 material exhibits significantly improved aqueous visible-light photoactivity compared to previous C60- and C60-derivative-based supported fullerene materials. Further, this material rapidly inactivates MS2 bacteriophage under sunlight illumination, oxidizes various organic contaminants, and does not appear to be significantly fouled by natural organic matter (NOM), highlighting the potential of these materials in real-world applications. Collectively, the ease of preparation and significantly enhanced visible-light photoactivity of these materials advance fullerene-based technologies for water treatment.

Sunlight inactivation of MS2 coliphage in the absence of photosensitizers: modeling the endogenous inactivation rate using a photoaction spectrum.

The endogenous sunlight inactivation rates of MS2 coliphage in photosensitizer-free water were measured (kobs) under different light conditions and compared to modeled inactivation rates (kmod) computed using a previously published action spectrum. Experiments were conducted under simulated and natural sunlight. There was generally good agreement between modeled and observed MS2 sunlight inactivation rates in the summer and winter, suggesting that the action spectrum can be used to predict changes in the inactivation rate caused by diurnal and seasonal changes in natural sunlight irradiance. However, we show that a major source of uncertainty in the predictions is the ability to accurately measure or model the comparatively weak and highly variable solar irradiance between 280 and 300 nm, a range to which the inactivation rate is very sensitive. The action spectrum was also used to predict the endogenous inactivation rates of MS2 at different depths in a column of strongly humic-colored [i.e., solar ultraviolet (UV)-attenuating] wetland water under simulated sunlight; we observed fairly good agreement between kobs and kmod, suggesting that the action spectrum can be used to estimate the decrease in the endogenous inactivation rate caused by spectrally selective sunlight attenuation in the water column.

Inactivation of MS2 coliphage by UV and hydrogen peroxide: comparison by cultural and molecular methodologies.

The use of advanced oxidation processes (AOP) are expected to increase for removal of emerging contaminants and pathogens from drinking water. In this study, the performance of a small community ultraviolet light reactor in combination with hydrogen peroxide (H2O2) for MS2 coliphage inactivation with two different flow rate conditions of 1 gal/min (gpm) and 2 gpm was evaluated. Following UV radiation, MS2 showed a reduction of 5.3-5.8 log10 when quantified with cultural plaque counts, whereas corresponding quantitative polymerase chain reaction (qPCR) data showed only a 1.7-2.8 log10 reduction in viral RNA copy number. When H2O2 was added at either 2.5 or 5 ppm with UV at both flow rate conditions, enhanced MS2 inactivation occurred with a more than 7 log10 reduction observed via plaque counts, indicating that all added MS2 had been inactivated, since no plaques were formed after incubation at 37 °C for 24 h. In contrast, qPCR only showed a corresponding 3-4 log10 reduction in viral RNA copy number. This research also sheds light on the inactivation of MS2 with ultraviolet light and in the presence of hydroxyl radicals and provides a practical use of qPCR to detect MS2 concentration following advanced oxidation relative to traditional plaque methodology; however qPCR detection overestimates the true number of infective virus.

Evaluation of an automated far ultraviolet-C light technology for decontamination of surfaces and aerosolized viruses in bathrooms.

BACKGROUND: Aerosols generated during toilet flushing are a potential source for transmission of viral and bacterial pathogens in bathrooms. However, manual decontamination of bathrooms after each use is not feasible. METHODS: We tested the efficacy of a wall-mounted far ultraviolet-C (UV-C) light technology that only delivers far UV-C when people are not present for decontamination of surfaces and aerosolized viral particles in an unoccupied hospital bathroom. A quantitative disk carrier test method was used to test efficacy against organisms on steel disk carriers placed in 9 sites in the bathroom with an exposure time of 45 min and 2 h; Clostridioides difficile spores were also exposed for 24 h. Efficacy against aerosolized bacteriophage MS2 was tested with a 45-minute exposure. RESULTS: The far UV-C technology reduced methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE), Candida auris, and bacteriophage MS2 on steel disk carriers by ≥ 1.2 log10 (range, 1.2 to 4.2 log10) at all test sites after 2 h of exposure. The technology reduced C. difficile spores by < 1 log10 after 2 h exposure, but 4 of 9 test locations had ≥ 2 log10 reductions after 24 h exposure. Aerosolized bacteriophage MS2 was reduced by 4 log10 plaque-forming units in 45 min. CONCLUSIONS: The far UV-C light technology could potentially be useful for automated decontamination of air and surfaces in bathrooms in healthcare and community settings.

Subtle differences in virus composition affect disinfection kinetics and mechanisms.

Viral disinfection kinetics have been studied in depth, but the molecular-level inactivation mechanisms are not understood. Consequently, it is difficult to predict the disinfection behavior of nonculturable viruses, even when related, culturable viruses are available. The objective of this work was to determine how small differences in the composition of the viral genome and proteins impact disinfection. To this end, we investigated the inactivation of three related bacteriophages (MS2, fr, and GA) by UV254, singlet oxygen ((1)O2), free chlorine (FC), and chlorine dioxide (ClO2). Genome damage was quantified by PCR, and protein damage was assessed by quantitative matrix-assisted laser desorption ionization (MALDI) mass spectrometry. ClO2 caused great variability in the inactivation kinetics between viruses and was the only treatment that did not induce genome damage. The inactivation kinetics were similar for all viruses when treated with disinfectants possessing a genome-damaging component (FC, (1)O2, and UV254). On the protein level, UV254 subtly damaged MS2 and fr capsid proteins, whereas GA's capsid remained intact. (1)O2 oxidized a methionine residue in MS2 but did not affect the other two viruses. In contrast, FC and ClO2 rapidly degraded the capsid proteins of all three viruses. Protein composition alone could not explain the observed degradation trends; instead, molecular dynamics simulations indicated that degradation is dictated by the solvent-accessible surface area of individual amino acids. Finally, despite the similarities of the three viruses investigated, their mode of inactivation by a single disinfectant varied. This explains why closely related viruses can exhibit drastically different inactivation kinetics.

Virus removal and inactivation by iron (hydr)oxide-mediated Fenton-like processes under sunlight and in the dark.

Advanced oxidation processes (AOPs) have emerged as a promising alternative to conventional disinfection methods to control microbial water quality, yet little is known about the fate of viruses in AOPs. In this study, we investigated the fate of MS2 coliphage in AOPs that rely on heterogeneous Fenton-like processes catalyzed by iron (hydr)oxide particles. Both physical removal of viruses from solution via adsorption onto particles as well as true inactivation were considered. Virus fate was studied in batch reactors at circumneutral pH, containing 200 mg L(-1) of four different commercial iron (hydr)oxide particles of similar mesh sizes: hematite (α-Fe2O3), goethite (α-FeOOH), magnetite (Fe3O4) and amorphous iron(iii) hydroxide (Fe(OH)3). The effect of adsorption and sunlight exposure on the survival of MS2 was considered. On a mass basis, all particles exhibited a similar virus adsorption capacity, whereas the rate of adsorption followed the order FeOOH > Fe2O3 > Fe3O4 ≈ Fe(OH)3. This adsorption behavior could not be explained by electrostatic considerations; instead, adsorption must be governed by other factors, such as hydrophobic interactions or van der Waals forces. Adsorption to three of the particles investigated (α-FeOOH, Fe3O4, Fe(OH)3) caused virus inactivation of 7%, 22%, and 14%, respectively. Exposure of particle-adsorbed viruses to sunlight and H2O2 resulted in efficient additional inactivation, whereas inactivation was negligible for suspended viruses. The observed first-order inactivation rate constants were 6.6 × 10(-2), 8.7 × 10(-2), 0.55 and 1.5 min(-1) for α-FeOOH, α-Fe2O3, Fe3O4 and Fe(OH)3 respectively. In the absence of sunlight or H2O2, no inactivation was observed beyond that caused by adsorption alone, except for Fe3O4, which caused virus inactivation via a dark Fenton-like process. Overall our results demonstrate that heterogeneous Fenton-like processes can both physically remove viruses from water as well as inactivate them via adsorption and via a particle-mediated (photo-)Fenton-like process.

Sunlight inactivation of human viruses and bacteriophages in coastal waters containing natural photosensitizers.

Sunlight inactivation of poliovirus type 3 (PV3), adenovirus type 2 (HAdV2), and two bacteriophage (MS2 and PRD1) was investigated in an array of coastal waters to better understand solar inactivation mechanisms and the effect of natural water constituents on observed inactivation rates (k(obs)). Reactor scale inactivation experiments were conducted using a solar simulator, and k(obs) for each virus was measured in a sensitizer-free control and five unfiltered surface water samples collected from different sources. k(obs) values varied between viruses in the same water matrix, and for each virus in different matrices, with PV3 having the fastest and MS2 the slowest k(obs) in all waters. When exposed to full-spectrum sunlight, the presence of photosensitizers increased k(obs) of HAdV2, PRD1 and MS2, but not PV3, which provides evidence that the exogenous sunlight inactivation mechanism, involving damage by exogenously produced reactive intermediates, played a greater role for these viruses. While PV3 inactivation was observed to be dominated by endogenous mechanisms, this may be due to a masking of exogenous k(obs) by significantly faster endogenous k(obs). Results illustrate that differences in water composition can shift absolute and relative inactivation rates of viruses, which has important implications for natural wastewater treatment systems, solar disinfection (SODIS), and the use of indicator organisms for monitoring water quality.

Reduction of bacteriophage MS2 by filtration and irradiation determined by culture and quantitative real-time RT-PCR.

Molecular methods are increasingly applied for virus detection in environmental samples without rendering data on viral infectivity. Infectivity data are important for assessing public health risks from exposure to human pathogenic viruses in the environment. Here, treatment efficiencies of three (drinking) water treatment processes were estimated by quantification of the indicator virus bacteriophage MS2 with culture and real-time reverse transcription polymerase chain reaction (qRT-PCR). We studied the virus reduction by slow sand filtration at a pilot plant. No decay of MS2 RNA was observed, whereas infectious MS2 particles were inactivated at a rate of 0.1 day(-1). Removal of MS2 RNA and infectious MS2 particles was 1.2 and 1.6 log10-units, respectively. Virus reduction by UV and gamma irradiation was determined in laboratory-scale experiments. The reduction of MS2 RNA based on qRT-PCR data was negligible. Reduction of infectious MS2 particles was estimated at 3.0-3.6 log10-units (UV dose up to 400 or 800 J/m(2)) and 4.7-7 log10-units (gamma dose up to 200 Gray). As shown in this study, estimations of viral reduction, both inactivation and removal, obtained by molecular methods should be interpreted carefully when considering treatment options to provide virus-safe drinking water. Combining culture-based methods with molecular methods may provide supplementary information on mechanisms of virus reduction.

UV radiation induces genome-mediated, site-specific cleavage in viral proteins.

Much research has been dedicated to understanding the molecular basis of UV damage to biomolecules, yet many questions remain regarding the specific pathways involved. Here we describe a genome-mediated mechanism that causes site-specific virus protein cleavage upon UV irradiation. Bacteriophage MS2 was disinfected with 254 nm UV, and protein damage was characterized with ESI- and MALDI-based FT-ICR, Orbitrap, and TOF mass spectroscopy. Top-down mass spectrometry of the products identified the backbone cleavage site as Cys46-Ser47 in the virus capsid protein, a location of viral genome-protein interaction. The presence of viral RNA was essential to inducing backbone cleavage. The similar bacteriophage GA did not exhibit site-specific protein cleavage. Based on the major protein fragments identified by accurate mass analysis, a cleavage mechanism is proposed by radical formation. The mechanism involves initial oxidation of the Cys46 side chain followed by hydrogen atom abstraction from Ser47 C(α). Computational protein QM/MM studies confirmed the initial steps of the radical mechanism. Collectively, this study describes a rare incidence of genome-induced protein cleavage without the addition of sensitizers.

Effects of relative humidity and spraying medium on UV decontamination of filters loaded with viral aerosols.

Although respirators and filters are designed to prevent the spread of pathogenic aerosols, a stockpile shortage is anticipated during the next flu pandemic. Contact transfer and reaerosolization of collected microbes from used respirators are also a concern. An option to address these potential problems is UV irradiation, which inactivates microbes by dimerizing thymine/uracil in nucleic acids. The objective of this study was to determine the effects of transmission mode and environmental conditions on decontamination efficiency by UV. In this study, filters were contaminated by different transmission pathways (droplet and aerosol) using three spraying media (deionized water [DI], beef extract [BE], and artificial saliva [AS]) under different humidity levels (30% [low relative humidity {LRH}], 60% [MRH], and 90% [HRH]). UV irradiation at constant intensity was applied for two time intervals at each relative humidity condition. The highest inactivation efficiency (IE), around 5.8 logs, was seen for DI aerosols containing MS2 on filters at LRH after applying a UV intensity of 1.0 mW/cm(2) for 30 min. The IE of droplets containing MS2 was lower than that of aerosols containing MS2. Absorption of UV by high water content and shielding of viruses near the center of the aggregate are considered responsible for this trend. Across the different media, IEs in AS and in BE were much lower than in DI for both aerosol and droplet transmission, indicating that solids present in AS and BE exhibited a protective effect. For particles sprayed in a protective medium, RH is not a significant parameter.

Visualizing and quantifying dose distribution in a UV reactor using three-dimensional laser-induced fluorescence.

Evaluating the performance of typical water treatment UV reactors is challenging due to the complexity in assessing spatial and temporal variation of UV fluence, resulting from highly unsteady, turbulent nature of flow and variation in UV intensity. In this study, three-dimensional laser-induced fluorescence (3DLIF) was applied to visualize and quantitatively analyze a lab-scale UV reactor consisting of one lamp sleeve placed perpendicular to flow. Mapping the spatial and temporal fluence delivery and MS2 inactivation revealed the highest local fluence in the wake zone due to longer residence time and higher UV exposure, while the lowest local fluence occurred in a region near the walls due to short-circuiting flow and lower UV fluence rate. Comparing the tracer based decomposition between hydrodynamics and IT revealed similar coherent structures showing the dependency of fluence delivery on the reactor flow. The location of tracer injection, varying the height and upstream distance from the lamp center, was found to significantly affect the UV fluence received by the tracer. A Lagrangian-based analysis was also employed to predict the fluence along specific paths of travel, which agreed with the experiments. The 3DLIF technique developed in this study provides new insight on dose delivery that fluctuates both spatially and temporally and is expected to aid design and optimization of UV reactors as well as validate computational fluid dynamics models that are widely used to simulate UV reactor performances.

Inactivation and tailing during UV254 disinfection of viruses: contributions of viral aggregation, light shielding within viral aggregates, and recombination.

UV disinfection of viruses frequently leads to tailing after an initial exponential decay. Aggregation, light shielding, recombination, or resistant virus subpopulations have been proposed as explanations; however, none of these options has been conclusively demonstrated. This study investigates how aggregation affects virus inactivation by UV(254) in general, and the tailing phenomenon in particular. Bacteriophage MS2 was aggregated by lowering the solution pH before UV(254) disinfection. Aggregates were redispersed prior to enumeration to obtain the remaining fraction of individual infectious viruses. Results showed that initial inactivation kinetics were similar for viruses incorporated in aggregates (up to 1000 nm in radius) and dispersed viruses; however, aggregated viruses started to tail more readily than dispersed ones. Neither light shielding, nor the presence of resistant subpopulations could account for the tailing. Instead, tailing was consistent with recombination arising from the simultaneous infection of the host by several impaired viruses. We argue that UV(254) treatment of aggregates permanently fused a fraction of viruses, which increased the likelihood of multiple infection of a host cell and ultimately enabled the production of infective viruses via recombination.

Bacteriophage inactivation by UV-A illuminated fullerenes: role of nanoparticle-virus association and biological targets.

Inactivation rates of the MS2 bacteriophage and (1)O(2) generation rates by four different photosensitized aqueous fullerene suspensions were in the same order: aqu-nC(60) < C(60)(OH)(6) ≈ C(60)(OH)(24) < C(60)(NH(2))(6). Alterations to capsid protein secondary structures and protein oxidation were inferred by detecting changes in infrared vibrational frequencies and carbonyl groups respectively. MS2 inactivation appears to be the result of loss of capsid structural integrity (localized deformation) and the reduced ability to eject genomic RNA into its bacterial host. Evidence is also presented for possible capsid rupture in MS2 exposed to UV-A illuminated C(60)(NH(2))(6) through TEM imagery and detection of RNA infrared fingerprints in ATR-FTIR spectra. Fullerene-virus mixtures were also directly visualized in the aqueous phase using a novel enhanced darkfield transmission optical microscope fitted with a hyperspectral imaging (HSI) spectrometer. Perturbations in intermolecular extended chains, HSI, and electrostatic interactions suggest that inactivation is a function of the relative proximity between nanoparticles and viruses and (1)O(2) generation rate. MS2 log survival ratios were linearly related to CT (product of (1)O(2) concentration C and exposure time T) demonstrating the applicability of classical Chick-Watson kinetics for all fullerenes employed in this study. Results suggest that antiviral properties of fullerenes can be increased by adjusting the type of surface functionalization and extent of cage derivatization thereby increasing the (1)O(2) generation rate and facilitating closer association with biological targets.

Virus inactivation mechanisms: impact of disinfectants on virus function and structural integrity.

Oxidative processes are often harnessed as tools for pathogen disinfection. Although the pathways responsible for bacterial inactivation with various biocides are fairly well understood, virus inactivation mechanisms are often contradictory or equivocal. In this study, we provide a quantitative analysis of the total damage incurred by a model virus (bacteriophage MS2) upon inactivation induced by five common virucidal agents (heat, UV, hypochlorous acid, singlet oxygen, and chlorine dioxide). Each treatment targets one or more virus functions to achieve inactivation: UV, singlet oxygen, and hypochlorous acid treatments generally render the genome nonreplicable, whereas chlorine dioxide and heat inhibit host-cell recognition/binding. Using a combination of quantitative analytical tools, we identified unique patterns of molecular level modifications in the virus proteins or genome that lead to the inhibition of these functions and eventually inactivation. UV and chlorine treatments, for example, cause site-specific capsid protein backbone cleavage that inhibits viral genome injection into the host cell. Combined, these results will aid in developing better methods for combating waterborne and foodborne viral pathogens and further our understanding of the adaptive changes viruses undergo in response to natural and anthropogenic stressors.

Synergistic effect of heat and solar UV on DNA damage and water disinfection of E. coli and bacteriophage MS2.

The response of a representative virus and indicator bacteria to heating, solar irradiation, or their combination, was investigated in a controlled solar simulator and under real sun conditions. Heating showed higher inactivation of Escherichia coli compared to the bacteriophage MS2. Heating combined with natural or simulated solar irradiation demonstrated a synergistic effect on the inactivation of E. coli, with up to 3-log difference for 50 °C and natural sun insolation of 2,000 kJ m(-2) (compared to the sum of the separate treatments). Similar synergistic effect was also evident when solar-UV induced DNA damage to E. coli was assessed using the endonuclease sensitive site assay (ESS). MS2 was found to be highly resistant to irradiation and heat, with a slightly synergistic effect observed only at 59 °C and natural sun insolation of 5,580 kJ m(-2). Heat treatment also hindered light-dependent recovery of E. coli making the treatment much more effective.

Role of temperature and Suwannee River natural organic matter on inactivation kinetics of rotavirus and bacteriophage MS2 by solar irradiation.

Although the sunlight-mediated inactivation of viruses has been recognized as an important process that controls surface water quality, the mechanisms of virus inactivation by sunlight are not yet clearly understood. We investigated the synergistic role of temperature and Suwannee River natural organic matter (SRNOM), an exogenous sensitizer, for sunlight-mediated inactivation of porcine rotavirus and MS2 bacteriophage. Upon irradiation by a full spectrum of simulated sunlight in the absence of SRNOM and in the temperature range of 14-42 °C, high inactivation rate constants, k(obs), of MS2 (k(obs) ≤ 3.8 h(-1) or 1-log(10) over 0.6 h) and rotavirus (k(obs) ≤ 11.8 h(-1) or ∼1-log(10) over 0.2 h) were measured. A weak temperature (14-42 °C) dependence of k(obs) values was observed for both viruses irradiated by the full sunlight spectrum. Under the same irradiation condition, the presence of SRNOM reduced the inactivation of both viruses due to attenuation of lower wavelengths of the simulated sunlight. For rotavirus and MS2 solutions irradiated by only UVA and visible light in the absence of SRNOM, inactivation kinetics were slow (k(obs) < 0.3 h(-1) or <1-log(10) unit reduction over 7 h) and temperature-independent for the range considered. Conversely, under UVA and visible light irradiation and in the presence of SRNOM, temperature-dependent inactivation of MS2 was observed. For rotavirus, the SRNOM-mediated exogenous inactivation was only important at temperatures >33 °C, with low rotavirus k(obs) values (k(obs) ≈ 0.2 h(-1); 1-log(10) unit reduction over 12 h) for the temperature range of 14-33 °C. These k(obs) values increased to 0.5 h(-1) at 43 °C and 1.5 h(-1) (1-log(10) reduction over 1.6 h) at 50 °C. While SRNOM-mediated exogenous inactivation of MS2 was triggered by singlet oxygen, the presence of hydrogen peroxide was important for rotavirus inactivation in the 40-50 °C range.

Simulated sunlight action spectra for inactivation of MS2 and PRD1 bacteriophages in clear water.

Action spectra for simulated sunlight were measured in clear water for two viruses: PRD1, a double-stranded DNA bacteriophage, and MS2, a single-stranded RNA bacteriophage. Viruses were diluted into phosphate buffered saline (20 mM PBS, pH 7.5) and exposed for 22 h to simulated sunlight either directly or through one of six glass filters with 50% cutoff wavelengths ranging from 280 to 350 nm. Virus survival was measured using the double agar layer plaque method. Both UVA (320-400 nm) and UVB (280-320 nm) light were found to contribute to PRD1 inactivation, while only UVB inactivated MS2. A computational model was developed for interpreting these action spectra with 3-nm resolution. Using these methods, we provide detailed estimates of the sensitivity of MS2 and PRD1 to photoinactivation from 285 to 345 nm. The resulting sensitivity coefficients can be combined with solar spectra to estimate inactivation rates in clear water under different sunlight conditions. This approach will be useful for modeling the inactivation of viruses and other microorganisms in sunlit natural and engineered systems.