ABSTRACT
This review covers the know-how of the Grupo de Química Analítica e Quimiometria regarding the analysis of fatty acids by capillary electrophoresis acquired over its 20 years of existence. Therefore, the fundamentals, advantages, and applications of this technique for analyzing different fatty acids in samples such as food, oils, cosmetics, and biological matrices are presented and discussed. Capillary electrophoresis is, thus, shown as an interesting and valuable separation technique for the target analysis of these analytes as an alternative to the gas chromatography coupled to flame ionization detection, as it offers advantages over the latter such as low analysis times, low sample and reagent consumption, the use of a nondedicated column, and simpler sample preparation. In addition, the methods shown in this literature review can be useful for quality control, adulteration, and health-related research by regulatory agencies.
Subject(s)
Electrophoresis, Capillary , Fatty Acids , Fatty Acids/analysis , Electrophoresis, Capillary/methods , Chromatography, Gas/methods , Oils , Drug ContaminationABSTRACT
Some studies suggested that gastrointestinal (GIT) decontamination with oil may improve the prognosis of patients who ingested aluminum phosphide (AlP). The aim of this study is to compare the efficacy and safety of gastric lavage with oil-based solutions to any method of gastric decontamination not using oils in patients presenting with acute AlP poisoning. The literature was searched for English-published randomized controlled trials (RCTs) from inception to 16 September 2023. The searched electronic databases included MEDLINE/PubMed, Cochrane Library, Web of Science, Egyptian Knowledge Bank, Scopus, and Google Scholar. Data were extracted and pooled by calculating the risk ratio (RR) for categorical outcomes and standardized mean difference (SMD) for numerical outcomes, with 95% confidence intervals (CI). Seven RCTs were included. Paraffin oil was significantly associated with a lower risk of mortality (RR = 0.59 [95% CI: 0.45, 0.76], p < .001), intubation (RR = 0.59 [95% CI: 0.46, 0.76], p < .001) and vasopressor need (RR = 0.71 [95% CI: 0.56, 0.91], p = .006). Survival time was significantly prolonged with paraffin oil (SMD = 0.72 [95% CI: 0.32, 1.13], p < .001). Coconut oil was significantly associated with prolonged survival time (SMD = 0.83 [95% CI: 0.06, 1.59], p = .03) as well as decreased risk of requiring intubation (RR = 0.78 [95% CI: 0.62, 0.99], p = .04). Oil-based GIT decontamination using paraffin oil showed benefits over conventional lavage regarding the incidence of in-hospital mortality and endotracheal intubation, and survival time. Coconut oil showed some benefits in terms of the intubation incidence and survival time. Decontamination using paraffin oil is recommended. Future clinical trials are warranted with larger sample sizes and focusing on cost-benefit and safety.
Subject(s)
Aluminum Compounds , Gastric Lavage , Phosphines , Humans , Aluminum Compounds/poisoning , Gastric Lavage/methods , Oils , Paraffin , Pesticides , Phosphines/poisoning , Poisoning , Randomized Controlled Trials as TopicABSTRACT
OBJECTIVE: Cannabidiol-enriched oil (CBDO) is being used increasingly to improve seizure control in adult patients with drug-resistant epilepsy (DRE), despite the lack of large-scale studies supporting its efficacy in this patient population. We aimed to assess the effects of add-on CBDO on seizure frequency as well as on gait, cognitive, affective, and sleep-quality metrics, and to explore the electrophysiological changes in responder and non-responder DRE patients treated with add-on CBDO. METHODS: We prospectively recruited adult DRE patients who were treated with add-on CBDO. Patients were evaluated prior to treatment and following 4 weeks of a maintenance daily dose of ≈260 mg CBD and ≈12 mg Δ9-tetrahydrocannabinol (THC). The outcome measures included seizure response to CBDO (defined as ≥50% decrease in seizures compared to pre-CBDO baseline), gait testing, Montreal Cognitive Assessment (MoCA), Hospital Anxiety and Depression Scale (HADS), and sleep-quality questionnaire assessments. Patients underwent electroencephalography (EEG) recording during rest as well as event-related potentials (ERPs) during visual Go/NoGo task while sitting and while walking. RESULTS: Nineteen patients were recruited, of which 16 finished pre- and post-CBDO assessments. Seven patients (43.75%) were responders demonstrating an average reduction of 82.4% in seizures, and nine patients (56.25%) were non-responders with an average seizure increase of 30.1%. No differences in demographics and clinical parameters were found between responders and non-responders at baseline. However, responders demonstrated better performance in the dual-task walking post-treatment (p = .015), and correlation between increase in MoCA and seizure reduction (r = .810, p = .027). Post-CBDO P300 amplitude was lower during No/Go-sitting in non-responders (p = .028) and during No/Go-walking in responders (p = .068). SIGNIFICANCE: CBDO treatment can reduce seizures in a subset of patients with DRE, but could aggravate seizure control in a minority of patients; yet we found no specific baseline clinical or electrophysiological characteristics that are associated with response to CBDO. However, changes in ERPs in response to treatment could be a promising direction to better identify patients who could benefit from CBDO treatment.
Subject(s)
Anticonvulsants , Cannabidiol , Drug Resistant Epilepsy , Electroencephalography , Humans , Male , Cannabidiol/therapeutic use , Female , Drug Resistant Epilepsy/drug therapy , Drug Resistant Epilepsy/physiopathology , Adult , Prospective Studies , Anticonvulsants/therapeutic use , Middle Aged , Young Adult , Evoked Potentials/drug effects , Evoked Potentials/physiology , Treatment Outcome , Dronabinol/therapeutic use , Gait/drug effects , Gait/physiology , OilsABSTRACT
This study investigates the stability and structure of oil-in-water emulsions stabilized by pea protein. Of the wide range of emulsion compositions explored, a region of stability at a minimum of 5% w/v pea protein and 30-50% v/v oil was determined. This pea protein concentration is more than what is needed to form a layer covering the interface. X-ray scattering revealed a thick, dense protein layer at the interface as well as hydrated protein dispersed in the continuous phase. Shear-thinning behavior was observed, and the high viscosity in combination with the thick protein layer at the interface creates a good stability against creaming and coalescence. Emulsions in a pH range from acidic to neutral were studied, and the overall stability was observed to be broadly similar independently of pH. Size measurements revealed polydisperse protein particles. The emulsion droplets are also very polydisperse. Apart from understanding pea protein-stabilized emulsions in particular, insights are gained about protein stabilization in general. Knowledge of the location and the role of the different components in the pea protein material suggests that properties such as viscosity and stability can be tailored for various applications, including food and nutraceutical products.
Subject(s)
Emulsions , Oils , Pea Proteins , Water , Emulsions/chemistry , Water/chemistry , Pea Proteins/chemistry , Oils/chemistry , Hydrogen-Ion Concentration , Particle Size , Viscosity , Pisum sativum/chemistryABSTRACT
Drawing inspiration from the unique properties of cactus spines and desert beetle shells, we have designed a biomimetic stainless steel mesh specifically for efficient water-in-oil emulsion separation. The tapered arrays of cactus spines are prepared by a light-curing-templating method, and the hydrophobic regions are constructed by adhering hydrophobic silica nanoparticles to the surface of the mesh. This innovative design takes full advantage of the unique properties of these two natural plants, which can agglomerate tiny emulsified water to achieve an emulsion-breaking effect only under static conditions. At the same time, the stainless steel mesh with the conical arrays has a high water-in-oil emulsion separation efficiency (up to 99.6%), high permeance (2400 L·m-2·h-1·bar-1), and good cycling performance. The concept of dual biomimetic explored in this work may extend beyond oil-water separation to encompass various applications, such as fog collection, droplet manipulation, and more.
Subject(s)
Cactaceae , Coleoptera , Emulsions , Oils , Water , Animals , Coleoptera/chemistry , Water/chemistry , Emulsions/chemistry , Cactaceae/chemistry , Oils/chemistry , Biomimetic Materials/chemistry , Silicon Dioxide/chemistry , Nanoparticles/chemistry , Hydrophobic and Hydrophilic Interactions , Biomimetics/methods , Stainless Steel/chemistryABSTRACT
Water is the lifeblood of everything on earth, nourishing and nurturing all forms of life, while also contributing to the development of civilization. However, with the rapid development of economic construction, especially the accelerated process of modern industrialization, the pollution of oily sewage is becoming increasingly serious, affecting the ecological balance and human health. The efficient elimination of pollutants in sewage is, therefore, particularly urgent. In this paper, a core-shell microbial reactor (MPFA@CNF-SA-AM) was fabricated by using nanocellulose and sodium alginate (SA) particles embedded with microorganisms as the core and lipophilic and hydrophobic fly ash as the outer shell layer. Compared with that of free microorganisms and cellulose and SA aerogel pellets loading with microorganisms (CNF-SA-AM), which has a degradation efficiency of 60.69 and 82.89%, respectively, the MPFA@CNF-SA-AM possesses a highest degradation efficiency of 90.60% within 240 h. So that this self-floating microbial reactor has selective adsorption properties to achieve oil-water separation in oily wastewater and high effective degradation of organic pollutants with low cost. The adsorption curves of MPFA@CNF-SA-AM for diesel and n-hexadecane were studied. The results showed that the adsorption follows the Freundlich model and is a multimolecular layer of physical adsorption. In addition, the degradation mechanism of diesel oil was studied by gas chromatography-mass spectrometry. The results showed that diesel oil was selectively adsorbed to the interior of MPFA@CNF-SA-AM, and it was degraded by enzymes in microorganisms into n-hexadecanol, n-hexadecaldehyde, and n-hexadecanoic acid in turn, and finally converted to water and carbon dioxide. Compared with existing oily wastewater treatment methods, this green and pollution-free dual-functional core-shell microbial reactor has the characteristics of easy preparation, high efficiency, flexibility, and large-scale degradation. It provides a new, effective green choice for oily wastewater purification and on-site oil spill accidents.
Subject(s)
Wastewater , Adsorption , Wastewater/chemistry , Water Pollutants, Chemical/chemistry , Alginates/chemistry , Cellulose/chemistry , Oils/chemistry , Biodegradation, Environmental , Polymers/chemistryABSTRACT
Artificially synthesized DNA is involved in the construction of a library of oil tracers due to their unlimited number and no-biological toxicity. The strategy of the construction is proposed by oleophilic Silica-encapsulated DNA nanoparticles, which offers fresh thinking in developing novel tracers, sensors, and molecular machines in engineering & applied sciences based on artificially synthesized DNA blocks.
Subject(s)
DNA , Nanoparticles , Silicon Dioxide , Silicon Dioxide/chemistry , DNA/chemistry , Nanoparticles/chemistry , Oils/chemistryABSTRACT
The 2021 WHO guidelines stress the importance of measuring ultrafine particles using particle number concentration (PNC) for health assessments. However, commonly used particle metrics such as aerodynamic diameter and number concentrations do not fully capture the diverse chemical makeup of complex particles. To address this issue, our study used high-throughput mass spectrometry to analyze the properties of cooking oil fumes (COFs) in real time and evaluate their impact on BEAS-2B cell metabolism. Results showed insignificant differences in COF number size distributions between soybean oil and olive oil (peak concentrations of 5.20 × 105/cm3), as well as between corn oil and peanut oil (peak concentrations of 4.35 × 105/cm3). Despite the similar major chemical components among the four COFs, variations in metabolic damage were observed, indicating that the relatively small amount of chemical components of COFs can also influence particle behavior within the respiratory system, thereby impacting biological responses. Additionally, interactions between accompanying gaseous COFs and particles may alter their chemical composition through various mechanisms, introducing additional chemicals and modifying existing proportions. Hence, the chemical composition and gaseous components of COFs hold equal importance to the particle number concentration (PNC) when assessing their impact on human health. The absence of these considerations in the current guidelines underscores a research gap. It is imperative to acknowledge that for a more comprehensive approach to safeguarding public health, guidelines must be regularly updated to reflect new scientific findings and robust epidemiological evidence.
Subject(s)
Oils , Particulate Matter , Humans , Particulate Matter/analysis , Cooking/methods , Gases/analysis , FoodABSTRACT
BACKGROUND: Recently, lipase processing for biodiesel production has shown a global increase as it is considered a potential alternative clean-fuel source. The current study's objective is to investigate of lipolytic activity of lipase produced from different strains of Pseudomonas aeruginosa (P. aeruginosa) in biodiesel production using edible plant oils. The goal is to develop an efficient and cost-effective method for producing inexpensive and environmentally friendly biodiesel. METHODS AND RESULTS: Four P. aeruginosa isolates were obtained from different environmental sources (soil), phenotypically identified, and it was confirmed by the PCR detection of the 16SrRNA gene. The isolated P. aeruginosa strains were screened for lipase production, and the recovered lipase was purified. Besides, the lipase (lip) gene was detected by PCR, and the purified PCR products were sequenced and analyzed. The production of biofuel was conducted using gas chromatography among tested oils. It was found that castor oil was the best one that enhances lipase production in-vitro.
Subject(s)
Biofuels , Pseudomonas Infections , Humans , Pseudomonas aeruginosa/metabolism , Lipase/metabolism , Oils , Base Sequence , Plant Oils/chemistryABSTRACT
Superhydrophobic materials used for oil-water separation have received wide attention. However, the simple and low-cost strategy for making durable superhydrophobic materials remains a major challenge. Here, this work reports that stable and durable superhydrophobic cotton fabrics can be prepared using a simple two-step impregnation process. Silica nanoparticles are surface modified by hydrolysis condensation of 3-aminopropyltrimethoxysilane (APTMS). 1,4-conjugate addition reaction between the acrylic group of cross-linking agent pentaerythritol triacrylate (PETA) and the amino group of octadecylamine (ODA) forms a covalent cross-linked rough network structure. The long hydrophobic chain of ODA makes the cotton fabric exhibit excellent superhydrophobic properties, and the water contact angle (WCA) of the fabric surface reaches 158°. The modified cotton fabric has good physical and chemical stability, self-cleaning, and anti-fouling. At the same time, the modified fabric shows excellent oil/water separation efficiency (98.16% after 20 cycles) and ultrahigh separation flux (15413.63 L m-2 h-1) due to its superhydrophobicity, superoleophilicity, and inherent porous structure. The method provides a broad prospect in the future diversification applications of oil/water separation and oil spill cleaning.
Subject(s)
Cotton Fiber , Hydrophobic and Hydrophilic Interactions , Oils , Water , Water/chemistry , Oils/chemistry , Silanes/chemistry , Surface Properties , Silicon Dioxide/chemistry , Nanoparticles/chemistry , Particle SizeABSTRACT
The usage and disposal of highly abundant single-use and multilayered plastics contribute to significant ecological problems. The thermochemical recovery of these plastics to useful products and chemicals provides opportunity for positive economic and environmental impacts. Most previous research use idealised and unrepresentative feedstocks. To address this, various mixed waste plastics collected from the rejected fraction of a municipal waste recovery facility in Ghana were pyrolyzed at varying temperatures of 450, 500 and 550 °C and their yields compared. The obtained chemical products were analysed using several different techniques. Energy and carbon balances of the processes were produced using the CHNS and energy content of the oil fraction and the compositional results of the pyrolysis gas fraction, the latter of which was measured by Gas Chromatography Thermal Conductivity Detection (GC-TCD). The oils were further assessed via Gas Chromatography Mass Spectrometry (GC-MS) to identify the available valuable compounds. The formed oil contained approximately 40% light hydrocarbons (C6 - C11), 18% middle hydrocarbons (C11 - C16) and 42% heavy hydrocarbon compounds (C16+). The optimal oil yield of 65.9 ± 0.5% and low heating value of 44.7 ± 0.1 MJ/kg for single-use plastics were recorded at highest heating temperatures of 550 and 500 °C, respectively. The findings provide indication that pyrolysis is a fitting solution for energy recovery from waste plastics.
Subject(s)
Hydrocarbons , Plastics , Oils , Hot Temperature , TemperatureABSTRACT
In this study, we studied the hydrocracking of waste chicken oil (WCO) catalyzed by mesoporous SO42-/KIT-6. The study included WCO extraction, SO42-/KIT-6 catalyst synthesis, hydrocracking, and catalytic characterization. XRD patterns revealed intense peaks in the low-angle region, with shoulder peaks showing an increase in sulphate loading from 10% to 30%. The BET-specific surface area for the pure KIT-6 supports measured at 1003 m2/g, indicative of a well-defined mesoporous structure. Thermogravimetric analysis (TGA) showed a two-stage weight loss, attributed to the elimination of hydrated water (about 200 °C) and decomposition of sulphate ions (400-450 °C). SEM analysis highlighted the surface morphology of the active SK-2 catalyst. Hydrocatalytic and catalytic cracking reactions were performed, and about 99.8% conversion was achieved with 20 mL/H H2 flow, whereas higher production of bioliquids was observed at a flow of 15 mL/h. The hydrocracking mechanism was also studied to understand the formation of lower hydrocarbons. GC analyses of simulated distilled gasoline, kerosene, and diesel showed diverse hydrocarbon compositions. For engine testing, non-hydrocracked fuel rose to 28 kW at 3000 rpm and declined to 21 kW at 3500 rpm. Emission analysis revealed decreasing trends in NOX emissions of hydrogen-rich blends, with values of 65 ppm, 54 ppm, and 48 ppm for petrol, NHBL, and HBL, respectively. Similarly, SO2 emissions reduced from petrol to NHBL and HBL at 910 ppm, 800 ppm, and 600 ppm, respectively, suggesting reduced environmental impact. CO emissions exhibited a substantial reduction in NHBL (0.90%) and HBL (0.54%) compared to petrol (2.70%), emphasizing the cleaner combustion characteristics. Our results provide a comprehensive exploration of waste chicken oil hydrocracking, emphasizing catalyst synthesis, fuel characterization, engine performance, and environmental impact, thereby contributing valuable insights to the field of sustainable bioenergy.
Subject(s)
Chickens , Animals , Catalysis , Oils/chemistryABSTRACT
Biotreatment of oily sludge and the involved microbial communities, particularly in saline environments, have been rarely investigated. We enriched a halophilic bacterial consortium (OS-100) from petroleum refining oily sludge, which degraded almost 86% of the aliphatic hydrocarbon (C10-C30) fraction of the oily sludge within 7 days in the presence of 100 g/L NaCl. Two halophilic hydrocarbon-degrading bacteria related to the genera Chromohalobacter and Halomonas were isolated from the OS-100 consortium. Hydrocarbon degradation by the OS-100 consortium was relatively higher compared to the isolated bacteria, indicating potential synergistic interactions among the OS-100 community members. Exclusion of FeCl2, MgCl2, CaCl2, trace elements, and vitamins from the culture medium did not significantly affect the hydrocarbon degradation efficiency of the OS-100 consortium. To the contrary, hydrocarbon biodegradation dropped from 94.1 to 54.4% and 5% when the OS-100 consortium was deprived from phosphate and nitrogen sources in the culture medium, respectively. Quantitative PCR revealed that alkB gene expression increased up to the 3rd day of incubation with 11.277-fold, consistent with the observed increments in hydrocarbon degradation. Illumina-MiSeq sequencing of 16 S rRNA gene fragments revealed that the OS-100 consortium was mainly composed of the genera Halomonas, Idiomarina, Alcanivorax and Chromohalobacter. This community structure changed depending on the culturing conditions. However, remarkable changes in the community structure were not always associated with remarkable shifts in the hydrocarbonoclastic activity and vice versa. The results show that probably synergistic interactions between community members and different subpopulations of the OS-100 consortium contributed to salinity tolerance and hydrocarbon degradation.
Subject(s)
Petroleum , Sewage , Sewage/microbiology , Oils/metabolism , Bacteria/genetics , Bacteria/metabolism , Hydrocarbons/metabolism , Petroleum/microbiology , Biodegradation, Environmental , Archaea/metabolism , Culture Media/metabolismABSTRACT
We investigated the effect of the rheological properties and composition of lecithin reverse wormlike micelles (LRWs) on the skin permeation of a model of a hydrophilic drug to determine whether LRWs support uniform hydrophilic drug/oil-based formulations and good drug penetrate into skin. Here, we prepared LRWs with D (-)-ribose (RI) or glycerol (GL) as polar compounds, liquid paraffin (LP) or isopropyl myristate (IPM) as oils, and 6-carboxyfluorescein (CF) as a model for a hydrophilic drug, and evaluated the rheological properties and skin penetration characteristics of the preparations. The LRWs showed moderate viscosity at 25 °C, a typical storage temperature, but decreasing viscosity at 32 °C, the surface temperature of human skin, suggesting that the LRWs would penetrate the microstructure of skin (e.g., wrinkles and hair follicles). The highest skin permeability of CF was observed when IPM was used as the oil, suggesting that both the stratum corneum and hair follicle routes are involved in drug permeation. The penetration of CF into hair follicles is influenced not only by the rheology of the formulation but also by the interaction between IPM and sebum in the hair follicles.
Subject(s)
Lecithins , Micelles , Humans , Lecithins/chemistry , Lecithins/metabolism , Skin/metabolism , Skin Absorption , Oils/chemistry , RheologyABSTRACT
BACKGROUND: The oil-soluble contrast medium used in hysterosalpingography has been shown to have a fertility-enhancing effect, but the underlying mechanism is unclear, especially regarding the role of window of implantation (WOI). This study aimed to assess the endometrial immunological impact of the WOI before and after bathing with the oil-soluble contrast medium in women with recurrent implantation failure (RIF). METHODS: This descriptive study involved two medical centers between December 18, 2019, and December 30, 2020. We included infertile women who underwent three or more transfer cycles, cumulative transplantation of at least four high-quality cleavage-stage embryos or three high-quality blastocysts without clinical pregnancy, and high-quality frozen embryos that were still available for implantation. Patients received 5 ml of ethiodized poppyseed oil bathing, endometrial biopsy around bathing, and frozen-thawed embryo transfer (FET) within four menstrual cycles after bathing. Patients were excluded if failure to complete anyone. Data on the baseline characteristics and clinical data of the FET cycles were collected, and endometrial biopsy specimens were collected in the luteal phase before and after bathing and subjected to immunohistochemistry. The number of CD56 and CD138 positive cells and H-score of expression of ανß-3 and HOXA10 in endometrium were collected. RESULTS: Thirty-four patients were initially enrolled in the study; ultimately, twelve patients with a median age of 32.5 years (range 27-40 years) completed the research. The median number of embryo transfer cycles was three (range 3-8). A total of 4 of 12 women (33.33%) were diagnosed with chronic endometritis before oil-soluble contrast bathing. After bathing, the median numbers of CD138-positive cells in endometrium decreased from 0.75 (range 0-13.5) to 0.65 (range 0-6), P = 0.035; additionally, the H-score of expression of ανß-3 in endometrium increased from 148.50 ± 31.63 to 175.58 ± 31.83, P < 0.001. The thickness of the endometrium also significantly increased (8.90 ± 1.45 mm vs.10.11 ± 1.98 mm, P = 0.005). However, no consistent changes were found in the expression of CD56 and HOXA10 in the endometrium. Five patients experienced biochemical pregnancies (41.67%), four had clinical pregnancies (33.33%), and three achieved live births following oil-soluble contrast bathing (25%). CONCLUSIONS: These results suggest that oil-soluble contrast medium bathing decreased CD138-positive cells and upregulated expression of ανß-3 during WOI in patients with RIF. This histological impact of endometrium may result in enhanced fertility during FET cycles. Investigating the ability of intrauterine bathing with lower-dosage oil-soluble contrast to improve pregnancy in the RIF population is warranted.
Subject(s)
Contrast Media , Embryo Implantation , Embryo Transfer , Endometrium , Infertility, Female , Humans , Female , Adult , Infertility, Female/therapy , Embryo Transfer/methods , Pregnancy , Endometritis/prevention & control , Hysterosalpingography/methods , Oils , Baths/methodsABSTRACT
Marine microalgae Schizochytrium sp. have a high content of docosahexaenoic acid (DHA), an omega-3 fatty acid that is attracting interest since it prevents certain neurodegenerative diseases. The obtention of a bioactive and purified DHA fatty acid ester using a whole-integrated process in which renewable sources and alternative methodologies are employed is the aim of this study. For this reason, lyophilized Schizochytrium biomass was used as an alternative to fish oil, and advanced extraction techniques as well as enzymatic modification were studied. Microalgal oil extraction was optimized via a surface-response method using pressurized liquid extraction (PLE) obtaining high oil yields (29.06 ± 0.12%) with a high concentration of DHA (51.15 ± 0.72%). Then, the enzymatic modification of Schizochytrium oil was developed by ethanolysis using immobilized Candida antarctica B lipase (Novozym® 435) at two reaction temperatures and different enzymatic loads. The best condition (40 °C and 200 mg of lipase) produced the highest yield of fatty acid ethyl ester (FAEE) (100%) after 8 h of a reaction attaining a cost-effective and alternative process. Finally, an enriched and purified fraction containing DHA-FAEE was obtained using open-column chromatography with a remarkably high concentration of 93.2 ± 1.3% DHA. The purified and bioactive molecules obtained in this study can be used as nutraceutical and active pharmaceutical intermediates of marine origin.
Subject(s)
Docosahexaenoic Acids , Esters , Lipase , Microalgae , Stramenopiles , Docosahexaenoic Acids/chemistry , Lipase/metabolism , Lipase/chemistry , Stramenopiles/chemistry , Microalgae/chemistry , Esters/chemistry , Enzymes, Immobilized/chemistry , Fungal Proteins , Biomass , Fish Oils/chemistry , Lipids/chemistry , Oils/chemistry , Aquatic Organisms , Fatty Acids/chemistry , Fatty Acids/analysisABSTRACT
Process affected water and other industrial wastewaters are a major environmental concern. During oil sands mining, large amounts of oil sands process affected water (OSPW) are generated and stored in ponds until reclaimed and ready for surface water discharge. While much research has focused on organics in process waters, trace metals at high concentrations may also pose environmental risks. Phytoremediation is a cost effective and sustainable approach that employs plants to extract and reduce contaminants in water. The research was undertaken in mesocosm scale constructed wetlands with plants exposed to OSPW for 60 days. The objective was to screen seven native emergent wetland species for their ability to tolerate high metal concentrations (arsenic, cadmium, copper, chromium, copper, nickel, selenium, zinc), and then to evaluate the best performing species for OSPW phytoremediation. All native plant species, except Glyceria grandis, tolerated and grew in OSPW. Carex aquatilis (water sedge), Juncus balticus (baltic rush), and Typha latifolia (cattail) had highest survival and growth, and had high metal removal efficiencies for arsenic (81-87â¯%), chromium (78-86â¯%), and cadmium (74-84â¯%), relative to other metals; and greater than 91â¯% of the dissolved portions were removed. The native plant species were efficient accumulators of all metals, as demonstrated by high root and shoot bioaccumulation factors; root accumulation was greater than shoot accumulation. Translocation factor values were greater than one for Juncus balticus (chromium, zinc) and Carex aquatilis (cadmium, chromium, cobalt, nickel). The results demonstrate the potential suitability of these species for phytoremediation of a number of metals of concern and could provide an effective and environmentally sound remediation approach for wastewaters.
Subject(s)
Metals , Oils , Sand , Wetlands , Sand/chemistry , Oils/chemistry , Water/chemistry , Metals/metabolism , Carex Plant/chemistry , Carex Plant/metabolism , Typhaceae/chemistry , Typhaceae/metabolism , Magnoliopsida/chemistry , Oil and Gas Fields , Water Pollutants, Chemical/chemistry , Water Pollutants, Chemical/metabolismABSTRACT
Ficus drupacea is a medicinal tree found in temperate regions. Various parts of this plant had been used traditionally for the treatment of various ailments such as root powder applied externally for skin infections. Analysis was carried out on the bioactive lipids extracted from Ficus drupacea fruit using both petroleum-based solvent (Hexane) and an environmentally friendly solvent Dimethyl carbonate (DMC). The results showed that DMC extraction yielded a high oil content in Ficus drupacea fruit (6.51 %). When examining the fatty acid composition using GC-FID analysis, Ficus drupacea oil extracted with DMC contained significant proportions of essential fatty acids such as linoleic acid (32.317 %), oleic acid (20.946 %), palmitic acid (25.841 %), etc. Additionally, DMC extraction resulted in higher levels of total phenolics in Ficus drupacea fruit oil compared to hexane. Moreover, DMC extracted oil exhibited stronger antioxidant properties, such as radical scavenging, anti- arthritic, photoprotective activity while displayed similar anti-inflammatory and anti-microbial activity as hexane-extracted oil. In summary, these findings demonstrate that DMC is an efficient and safer alternative to conventional solvent hexane for extracting oils from Ficus drupacea fruit. It is rich in bioactive compounds essential for human nutrition, including polyunsaturated fatty acids, flavonoids, and phenolic compounds, with enhanced biological activities.
Subject(s)
Ficus , Humans , Solvents , Hexanes , Lipidomics , Antioxidants/pharmacology , Antioxidants/analysis , OilsABSTRACT
In this investigation, the study focused on the chemical constitution and the antioxidative as well as anti-inflammatory characteristics of oils and pulpy variants (Imatchan (IM), Harmocha (HA), and Aknari (AK)) sourced from O. dillenii. This inquiry encompassed both in vitro and in silico analyses. High-performance liquid chromatography (HPLC) was employed to ascertain the phenolic constituents, while gas chromatography-mass spectrometry (GC-MS) methodologies. were applied to discern the volatile makeup. The appraisal of antioxidant potential was conducted via the deployment of assays such as 2,2-diphenyl-1-picrylhydrazyl (DPPH), ferric reducing antioxidant power (FRAP), and ferric ion chelating (FIC) techniques. The anti-inflammatory activity was examined using BSA and LOX. Molecular docking methods assessed the antioxidant and anti-inflammatory properties. According to HPLC findings, the most abundant compounds detected in AKO and IMO cultivars were quercetin 3-O-ß-D-glucoside followed by vanillic acid, ferulic acid and tyrolsol. Concerning headspace GC-MS analysis E-11-hexadecenal and (E)-2-undecenal contribute to the major compounds detected in Opuntia HA, IM, and AK pulp and oil. The DPPH IC50 for AK, HA and IM were 38.41±1.54, 42.24±0.29 and 15.17±1.28â mg/mL, respectively. The FRAP IC50 capacity of AK, HA and IM was determined to be 30.23±0.6, 55.96±0.08 and 23.41±1.83â mg/mL, respectively. AK, HA and IM displayed significant FIC activity, with IC50 values of 42.75±0.63, 39.54±0.59 and 35.31±1.38â mg/mL, respectively. The AK, HA and IM O. dillenii oils were effective in their anti-inflammatory activity. Molecular docking of O. dillenii oils phenolic compounds was conducted to determine the possible targeted proteins by the phenolic compounds in O. dillenii's compounds. Overall, these fruits demonstrated the potential for new ingredients for culinary or pharmaceutical applications, providing value to these natural species that can flourish in arid conditions.
Subject(s)
Antioxidants , Opuntia , Antioxidants/pharmacology , Antioxidants/chemistry , Opuntia/chemistry , Molecular Docking Simulation , Plant Extracts/chemistry , Anti-Inflammatory Agents/pharmacology , Phenols/pharmacology , OilsABSTRACT
Importance: Knee osteoarthritis is disabling, with few effective treatments. Preliminary evidence suggested that krill oil supplementation improved knee pain, but effects on knee osteoarthritis remain unclear. Objective: To evaluate efficacy of krill oil supplementation, compared with placebo, on knee pain in people with knee osteoarthritis who have significant knee pain and effusion-synovitis. Design, Setting, and Participants: Multicenter, randomized, double-blind, placebo-controlled clinical trial in 5 Australian cities. Participants with clinical knee osteoarthritis, significant knee pain, and effusion-synovitis on magnetic resonance imaging were enrolled from December 2016 to June 2019; final follow-up occurred on February 7, 2020. Interventions: Participants were randomized to 2 g/d of krill oil (n = 130) or matching placebo (n = 132) for 24 weeks. Main Outcomes and Measures: The primary outcome was change in knee pain as assessed by visual analog scale (range, 0-100; 0 indicating least pain; minimum clinically important improvement = 15) over 24 weeks. Results: Of 262 participants randomized (mean age, 61.6 [SD, 9.6] years; 53% women), 222 (85%) completed the trial. Krill oil did not improve knee pain compared with placebo (mean change in VAS score, -19.9 [krill oil] vs -20.2 [placebo]; between-group mean difference, -0.3; 95% CI, -6.9 to 6.4) over 24 weeks. One or more adverse events was reported by 51% in the krill oil group (67/130) and by 54% in the placebo group (71/132). The most common adverse events were musculoskeletal and connective tissue disorders, which occurred 32 times in the krill oil group and 42 times in the placebo group, including knee pain (n = 10 with krill oil; n = 9 with placebo), lower extremity pain (n = 1 with krill oil; n = 5 with placebo), and hip pain (n = 3 with krill oil; n = 2 with placebo). Conclusions and Relevance: Among people with knee osteoarthritis who have significant knee pain and effusion-synovitis on magnetic resonance imaging, 2 g/d of daily krill oil supplementation did not improve knee pain over 24 weeks compared with placebo. These findings do not support krill oil for treating knee pain in this population. Trial Registration: Australian New Zealand Clinical Trials Registry Identifier: ACTRN12616000726459; Universal Trial Number: U1111-1181-7087.