Analytics and applications of polyglycerol polyricinoleate (PGPR)-Current research progress.

Polyglycerol polyricinoleate (PGPR) is a synthetic food additive containing a complex mixture of various esters. In recent years, there has been a growing trend to use PGPR-stabilized water-in-oil (W/O) emulsions to replace fat in order to produce low-calorie food products. In this respect, it is essential to comprehensively characterize the PGPR molecular species composition, which might enable to reduce its required amount in emulsions and foods based on a better understanding of the structure-activity relationship. This review presents the recent research progress on the characterization and quantitative analysis of PGPR. The influencing factors of the emulsifying ability of PGPR in W/O emulsions are further illustrated to provide new insights on the total or partial replacement of PGPR. Moreover, the latest progress on applications of PGPR in food products is described. Current studies have revealed the complex structure of PGPR. Besides, recent research has focused on the quantitative determination of the composition of PGPR and the quantification of the PGPR concentration in foods. However, research on the quantitative determination of the (poly)glycerol composition of PGPR and of the individual molecular species present in PGPR is still limited. Some natural water- or oil-soluble surfactants (e.g., proteins or lecithin) have been proven to enable the partial replacement of PGPR in W/O emulsions. Additionally, water-dispersible phytosterol particles and lecithin have been successfully used as a substitute of PGPR to create stable W/O emulsions.

Poly(ester-anhydrides) Derived from Esters of Hydroxy Acid and Cyclic Anhydrides.

The alternating architecture and hydrophobic side chains hinder hydrolytic cleavage and anhydride interchange in poly(sebacic acid-ricinoleic acid) (P(SA-RA)), which provides stable polyanhydrides at room temperature. In this report, a series of polyanhydrides were designed to investigate the effect of ester bonds, hydrophobic side chains, phenyl moieties, and their distance from anhydride bonds on their stability and properties. Polyanhydrides with alternating architecture are constructed by the polymerization of ester-diacids prepared from ricinoleic or other hydroxy acids with anhydrides such as succinic, maleic, and phthalic anhydrides. The hydrophobic side chains are designed closer to anhydride bonds to investigate hindrance to hydrolytic cleavage and anhydride interchange. Polyanhydrides were obtained by the activation of ester-diacid using acetic anhydride followed by melt condensation. The reactions were monitored by NMR, Fourier transform infrared (FTIR), and gel permeation chromatography (GPC). The synthesized poly(ester-anhydride)s with a shorter chain length compared to P(SA-RA) were stable at room temperature. The hydrolytic degradation studies reveal that the phenyl moiety present in poly(ricinoleic acid phthalate) (PRAP) and poly(hydroxystearic acid phthalate) (PHSAP) reduces the hydrolysis of anhydride bonds. Poly(hydroxyoctanoic acid succinate) (PHOAS) demonstrates the highest molecular weight of all tested polymers. The results reveal that the presence of hydrophobic side chains, phenyl moieties, and their distance from anhydride bonds significantly improves the stability. These stable polyanhydrides can provide convenience to use in control drug-delivery applications. The in vitro drug release study using ibuprofen shows that polymers with aromatic units such as PRAP and PHSAP establish sustained release, which presents more than 50 and 40% of ibuprofen over a period of 28 days.

Cytotoxic and genotoxic effects of (R)- and (S)-ricinoleic acid derivatives.

(R)-ricinoleic acid is the main component of castor oil from Ricinus communis L. Due to the presence of the hydroxyl group in homoallylic position and asymmetrically substituted carbon atom, it may undergo a number of chemical and biochemical transformations resulting in the products with some specific bioactivities. Conversion of (R)-ricinoleic acid into its (S)-enantiomer enables synthesis of both (R)- and (S)-ricinoleic acid derivatives and comparison of their biological activities. In the present research, (R)- and (S)-ricinoleic acid amides synthesized from methyl ricinoleates and ethanolamine or pyrrolidine as well as acetate derivatives of ethanolamine amides were studied to demonstrate their biological activities using HT29 cancer cells. Double staining of cells with fluorochromes (Hoechst 33258/propidium iodide) as well as 2,'7'-dichlorodihydrofluorescein (DCF) and comet assays were performed. Both the tested amides and acetates caused DNA damage and induced apoptotic and necrotic cell death. In the case of (R)- and (S)-enantiomers of one of the tested acetates, significant difference in the ability to induce DNA damage was observed, which showed the impact of the stereogenic center on the activities of these compounds.

Production of 7,10,12-trihydroxy-8(E)-octadecenoic acid from ricinoleic acid by Pseudomonas aeruginosa KNU-2B.

Microbial production of hydroxy fatty acids (HFAs) was widely studied because of important biological properties of HFAs. Among microorganisms producing HFAs, Pseudomonas aeruginosa PR3 was well known to produce various HFAs from different unsaturated fatty acids. Recently, a new variant species of P. aeruginosa PR3 was isolated and characterized, showing improved efficiency for producing 7,10-dihydroxy-8(E)-octadecenoic acid from oleic acid. In this study, we report the production of 7,10,12-trihydroxy-8(E)-octadecenoic acid (TOD) from ricinoleic acid by the newly isolated P. aeruginosa KNU-2B. TOD was efficiently produced from ricinoleic acid by KNU-2B with the maximum conversion yield of 56.7% under the optimum reaction conditions of pH 8.0 and 48-h incubation at 27 °C, 150 rpm. Under optimized reaction conditions, maximum TOD production reached 340.3 mg/100 mL of the culture. However, requirement of nutritional factors by KNU-2B for production of TOD were considerably different from those by PR3 strain.

Synthesis and Biological Evaluation of Four New Ricinoleic Acid-Derived 1-O-alkylglycerols.

A series of novel substituted 1-O-alkylglycerols (AKGs) containing methoxy (8), gem-difluoro (9), azide (10) and hydroxy (11) group at 12 position in the alkyl chain were synthesized from commercially available ricinoleic acid (12). The structures of these new synthesized AKGs were established by NMR experiments as well as from the HRMS and elementary analysis data. The antimicrobial activities of the studied AKGs 8-11 were evaluated, respectively, and all compounds exhibited antimicrobial activity to different extents alone and also when combined with some commonly used antibiotics (gentamicin, tetracycline, ciprofloxacin and ampicillin). AKG 11 was viewed as a lead compound for this series as it exhibited significantly higher antimicrobial activity than compounds 8-10.

Identification of Glyceryl MonoRicinoleate (GMR) isomers using RP-HPLC and regio-specificity of lipases.

In the present study, we report a reverse-phase high-performance liquid chromatography (RP-HPLC) method for separation of the regio-isomers of Glyceryl MonoRicinoleate (GMR) identified using position specificity of lipases. The approaches explored to identify these regio-isomers include LC-mass spectrometry, UV spectroscopy, and selective hydrolysis with lipases. A distinct UV absorption spectrum and λmax values for each isomer were noted, and mass spectral analysis further revealed their molecular weight. Lastly, the purified regio-isomers were subjected to hydrolysis with two distinctive regio-specific lipases to identified as sn-2 and sn-1(3) GMR. The current methodology of using analytic tool and enzyme specificity provides a useful platform for identifying regio-isomers for structured lipid synthesis.

Whole-Cell Photoenzymatic Cascades to Synthesize Long-Chain Aliphatic Amines and Esters from Renewable Fatty Acids.

Long-chain aliphatic amines such as (S,Z)-heptadec-9-en-7-amine and 9-aminoheptadecane were synthesized from ricinoleic acid and oleic acid, respectively, by whole-cell cascade reactions using the combination of an alcohol dehydrogenase (ADH) from Micrococcus luteus, an engineered amine transaminase from Vibrio fluvialis (Vf-ATA), and a photoactivated decarboxylase from Chlorella variabilis NC64A (Cv-FAP) in a one-pot process. In addition, long chain aliphatic esters such as 10-(heptanoyloxy)dec-8-ene and octylnonanoate were prepared from ricinoleic acid and oleic acid, respectively, by using the combination of the ADH, a Baeyer-Villiger monooxygenase variant from Pseudomonas putida KT2440, and the Cv-FAP. The target compounds were produced at rates of up to 37 U g-1 dry cells with conversions up to 90 %. Therefore, this study contributes to the preparation of industrially relevant long-chain aliphatic chiral amines and esters from renewable fatty acid resources.

Phytochemical Analysis and Potential Biological Activities of Essential Oil from Rice Leaf.

Although many investigations on phytochemicals in rice plant parts and root exudates have been conducted, information on the chemical profile of essential oil (EO) and potent biological activities has been limited. In this study, chemical compositions of rice leaf EO and in vitro biological activities were investigated. From 1.5 kg of fresh rice leaves, an amount of 20 mg EO was obtained by distillation and analyzed by gas chromatography-mass spectrometry (GC-MS), electrospray ionization (ESI), and atmospheric pressure chemical ionization (APCI) to reveal the presence of twelve volatile constituents, of which methyl ricinoleate (27.86%) was the principal compound, followed by palmitic acid (17.34%), and linolenic acid (11.16%), while 2-pentadecanone was the least (2.13%). Two phytoalexin momilactones A and B were first time identified in EO using ultra-performance liquid chromatography coupled with electrospray mass spectrometry (UPLC/ESI-MS) (9.80 and 4.93 ng/g fresh weight, respectively), which accounted for 7.35% and 3.70% of the EO, respectively. The assays of DPPH (IC50 = 73.1 µg/mL), ABTS (IC50 = 198.3 µg/mL), FRAP (IC50 = 700.8 µg/mL) and ß-carotene oxidation (LPI = 79%) revealed that EO possessed an excellent antioxidant activity. The xanthine oxidase assay indicated that the anti-hyperuricemia potential was in a moderate level (IC50 = 526 µg/mL) as compared with the standard allopurinol. The EO exerted potent inhibition on growth of Raphanus sativus, Lactuca sativa, and two noxious weeds Echinochloa crus-galli, and Bidens pilosa, but in contrast, the growth of rice seedlings was promoted. Among the examined plants, the growth of the E. crus-galli root was the most inhibited, proposing that constituents found in EO may have potential for the control of the problematic paddy weed E. crus-galli. It was found that the EO of rice leaves contained rich phytochemicals, which were potent in antioxidants and gout treatment, as well as weed management. Findings of this study highlighted the potential value of rice leaves, which may provide extra benefits for rice farmers.

Double emulsions for iron encapsulation: is a high concentration of lipophilic emulsifier ideal for physical and chemical stability?

BACKGROUND: Worldwide iron deficiency in diets has led to a growing interest in the development of food-compatible encapsulation systems for soluble iron, which are able to prevent iron's undesirable off-taste and pro-oxidant activity. Here, we explore the use of double emulsions for this purpose, and in particular, how the lipophilic emulsifier (polyglycerol polyricinoleate, PGPR) concentration influences the physicochemical stability of water-in-oil-in-water (W1 /O/W2 ) double emulsions containing ferrous sulphate in the inner water droplets. Double emulsions were prepared with sunflower oil containing 10 to 70 g kg-1 PGPR in the oil phase, and were monitored for droplet size distribution, morphology, encapsulation efficiency (EE) and oxidative stability over time. RESULTS: Fresh double emulsions showed an initial EE higher than 88%, but EE decreased upon storage, which occurred particularly fast and to a high extent in the emulsions prepared with low PGPR concentrations. All double emulsions underwent lipid oxidation, in particular those with the highest PGPR concentration, which could be due to the small inner droplet size and thus promoted contact between oil and the internal water phase. CONCLUSION: These results show that a too high PGPR concentration is not needed, and sometimes even adverse, when developing double emulsions as iron encapsulation systems. © 2019 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Synthesis and cytotoxicity of (R)- and (S)-ricinoleic acid amides and their acetates.

An environment-friendly, free of solvent, process for the synthesis of (R)- and (S)-ricinoleic acid amides has been developed. Starting from methyl ricinoleates and pyrrolidine or ethanolamine, the corresponding amides were obtained with yields ranging from 83-88%. Among 12 synthesized derivatives of ricinoleic acid, including the starting methyl esters, amides, and their acetates, nine compounds were obtained and tested for the first time. Studies on ricinoleic acid derivatives cytotoxicity showed that methyl esters were the least cytotoxic compounds and modification of their structure resulted in increasing cytotoxicity of the obtained products against both cancer cells and normal lymphocytes. Both enantiomers of the ethanolamine-derived amides showed the most promising anticancer potential.

Insights into the Gelating Abilities of Ricinelaidic Acid and its Ammonium Salts: How do Stereochemistry, Charge, and Chain Lengths Control Gelation of a Long-Chain Alkenoic Acid?

The gelating abilities of ricinelaidic acid (d-REA), the trans-isomer of ricinoleic acid (d-RA), and a series of its alkylammonium and alkane-α,ω-diammonium salts have been examined in a wide range of organic liquids. The gelation efficiency of the trans acid is much better than that of the cis, although neither is as efficient as is the completely saturated molecular gelator analogue, (R)-12-hydroxystearic acid (d-12HSA). The formation of ammonium salts also improves the gelation ability of d-REA in high polarity liquids. The gelating properties are highly dependent upon the chain length of the alkyl group of the alkylammonium salts, but not very dependent on the chain length of the alkane-α,ω-diammonium salts. Structural insights from Fourier transform infrared spectroscopy and powder X-ray diffraction indicate that the absence or presence of unsaturation, the incorporation of (charged) ammonium centers, and the different chain lengths of the alkylammonium salts lead to different packing arrangements and different strengths of H-bonding interactions within the gel assemblies of the d-REA derivatives. Insights into the relationships among the various systematic structural changes to d-REA and the properties of their aggregated structures, including the gel states, are provided.

Alternating Poly(ester-anhydride) by Insertion Polycondensation.

We report on a synthetic method where polyanhydride is used as starting material and the ester monomers are inserted through complete esterification, leading to an alternating ester-anhydride copolymer. The molar ratio of ricinoleic acid (RA) and sebacic acid (SA) was optimized until polysebacic acid is completely converted to carboxylic acid-terminated RA-SA and RA-SA-RA ester-dicarboxylic acids. These dimers and trimers were activated with acetic anhydride, polymerized under heat and vacuum to yield alternating RA-SA copolymer. The resulting alternating poly(ester-anhydride) have the RA at regular intervals. The regular occurrences of RA side chains prevent anhydride interchange, enhancing hydrolytic stability, which allows storage of the polymer at room temperature.

Synthesis and biological evaluation of ricinoleic acid-based lipoamino acid derivatives.

A series of novel ricinoleic acid based lipoamino acid derivatives were synthesized from (Z)-methyl-12-aminooctadec-9-enoate and different l-amino acids (glycine, alanine, phenyl alanine, valine, leucine, isoleucine, proline and tryptophan). The structures of all the prepared compounds were characterized by 1H NMR, 13C NMR and mass spectral studies. The title compounds were evaluated for their antimicrobial and anti-biofilm activities. Among all the derivatives, compound 7a (Z)-methyl-12-(2-aminoacetamido)octadec-9-enoate exhibited promising antibacterial activity (MIC, 3.9-7.8µg/mL) and compounds 7b (Z)-methyl 12-(2-aminopropanamido)octadec-9-enoate and 7g (Z)-methyl-12-(pyrrolidine-2-carboxamido)octadec-9-enoate exhibited moderate activity (MIC, 7.8-31.2µg/mL) selectively against four different Gram-positive bacterial strains such as Staphylococcus aureus MTCC 96, Bacillus subtilis MTCC 121, S. aureus MLS-16 MTCC 2940, Micrococcus luteus MTCC 2470. These compounds also exhibited excellent antifungal activity against studied fungal strains. Further, the compounds 7a, 7b and 7g were also screened for anti-biofilm activity. Among these lipoamino acid derivatives, compound 7a exhibited good anti-biofilm activity (IC50, 1.9-4.1µg/mL) against four Gram-positive bacterial strains.

Evaluation of the percutaneous absorption of chlorpromazine from PLO gels across porcine ear and human abdominal skin.

OBJECTIVE: The overall objective of this work is to determine the percutaneous absorption of chlorpromazine hydrochloride from pluronic lecithin organogels (PLO gels) and verify the suitability of topically applied chlorpromazine hydrochloride PLO gels for use in hospice patients for relieving symptoms such as vomiting and nausea during the end stages of life. METHODS: PLO gels of chlorpromazine hydrochloride were prepared using isopropyl palmitate (IPP) or ricinoleic acid (RA) as oil phase. In vitro percutaneous absorption of chlorpromazine hydrochloride was assessed through porcine ear and human abdominal skin. Further, the theoretical steady state plasma concentration (Css) of chlorpromazine was calculated from the flux values. RESULTS: The pH, viscosity, and stability of both PLO gels prepared with IPP and RA were comparable. The thixotropic property of RA PLO gel was found to be better than that of IPP PLO gel. The permeation of chlorpromazine hydrochloride was higher from RA PLO gel than from IPP PLO gel and pure drug solution. Theoretical Css of chlorpromazine from pure drug solution, IPP PLO gel and RA PLO gel were found to be 1.05, 1.20, and 1.50 ng/ml, respectively. PLO gels only marginally increased the flux and theoretical Css of chlorpromazine. CONCLUSION: From this study, it is clearly evident that PLO gels fail to achieve required systemic levels of chlorpromazine following topical application. Chlorpromazine PLO gel may not be effective in treating nausea and vomiting for hospice patients with swallowing difficulties.

Biotechnological production of γ-decalactone, a peach like aroma, by Yarrowia lipolytica.

The request for new flavourings increases every year. Consumer perception that everything natural is better is causing an increase demand for natural aroma additives. Biotechnology has become a way to get natural products. γ-Decalactone is a peach-like aroma widely used in dairy products, beverages and others food industries. In more recent years, more and more studies and industrial processes were endorsed to cost-effect this compound production. One of the best-known methods to produce γ-decalactone is from ricinoleic acid catalyzed by Yarrowia lipolytica, a generally regarded as safe status yeast. As yet, several factors affecting γ-decalactone production remain to be fully understood and optimized. In this review, we focus on the aromatic compound γ-decalactone and its production by Y. lipolytica. The metabolic pathway of lactone production and degradation are addressed. Critical analysis of novel strategies of bioprocess engineering, metabolic and genetic engineering and other strategies for the enhancement of the aroma productivity are presented.

Castor Oil-Based Biodegradable Polyesters.

This Review compiles the synthesis, physical properties, and biomedical applications for the polyesters based on castor oil and ricinoleic acid. Castor oil has been known for its medicinal value since ancient times. It contains ∼90% ricinoleic acid, which enables direct chemical transformation into polyesters without interference of other fatty acids. The presence of ricinoleic acid (hydroxyl containing fatty acid) enables synthesis of various polyester/anhydrides. In addition, castor oil contains a cis-double bond that can be hydrogenated, oxidized, halogenated, and polymerized. Castor oil is obtained pure in large quantities from natural sources; it is safe and biocompatible.

Antiproliferative activity of synthetic fatty acid amides from renewable resources.

In the work, the in vitro antiproliferative activity of a series of synthetic fatty acid amides were investigated in seven cancer cell lines. The study revealed that most of the compounds showed antiproliferative activity against tested tumor cell lines, mainly on human glioma cells (U251) and human ovarian cancer cells with a multiple drug-resistant phenotype (NCI-ADR/RES). In addition, the fatty methyl benzylamide derived from ricinoleic acid (with the fatty acid obtained from castor oil, a renewable resource) showed a high selectivity with potent growth inhibition and cell death for the glioma cell line-the most aggressive CNS cancer.

Development and characterization of a ricinoleic acid poloxamer gel system for transdermal eyelid delivery.

OBJECTIVE: This study deals with the preparation and evaluation of a pluronic lecithin organogel (PLO gel) containing ricinoleic acid for the transdermal eyelid delivery of dexamethasone and tobramycin. METHODS: Five different PLO gel formulations (F1, F2, F3, F4 and F5) containing tobramycin (0.3%) and dexamethasone (0.1%) were prepared and compared to a conventional PLO gel (light mineral oil PLO gel, F6) with respect to physical appearance and viscosity. The optimized ricinoleic acid PLO gel formulation (F2) was further characterized for pH, gelation temperature, morphology and drug content. Ex vivo permeability of dexamethasone and bactericidal activity of tobramycin from formulation F2 was tested, and values were compared to the marketed Tobradex® eye ointment. RESULTS: No apparent changes in the physical appearance and consistency were observed when ricinoleic acid was used as the oil phase. The pH of the optimized ricinoleic acid PLO gel (formulation F2) was found to be 6.54 with a gelation temperature of 31 °C. The drug content of tobramycin and dexamethasone were found to be 102.8% and 100.14%, respectively. The penetration profile of dexamethasone from formulation F2 was found to be much higher than the marketed Tobradex® eye ointment. F2 showed a better antimicrobial activity and higher zones of inhibition when compared to the marketed Tobradex® eye ointment. CONCLUSION: The findings of this investigation indicate that the ricinoleic acid PLO gel has the potential for use as a transdermal eyelid delivery system.

Assessment of the induction of dormant ring stages in Plasmodium falciparum parasites by artemisone and artemisone entrapped in Pheroid vesicles in vitro.

The in vitro antimalarial activities of artemisone and artemisone entrapped in Pheroid vesicles were compared, as was their ability to induce dormancy in Plasmodium falciparum. There was no increase in the activity of artemisone entrapped in Pheroid vesicles against multidrug-resistant P. falciparum lines. Artemisone induced the formation of dormant ring stages similar to dihydroartemisinin. Thus, the Pheroid delivery system neither improved the activity of artemisone nor prevented the induction of dormant rings.

Development of a GC-FID method for quantitative characterisation of polyglycerols in polyglycerol polyricinoleate (PGPR) present in a lipid matrix.

PGPR is an emulsifier (E476) widely used in the food industry. In this study, a gas chromatography-flame ionisation detection (GC-FID) method was developed for the quantitative characterisation of the polyglycerol composition of PGPR. The method was validated to analyse quantitatively the polyglycerol species in neat PGPR products and in PGPR samples present in a lipid matrix. This method consists of saponification, acidification and petroleum ether extraction to remove interfering fatty acids, neutralisation, silylation and finally GC-FID analysis. Phenyl ß-D-glucopyranoside was used as internal standard as sorbitol proved unsuitable due to its susceptibility to interference from Na/K chloride during silylation. The response factors of glycerol and diglycerol towards phenyl ß-D-glucopyranoside were determined using pure standards, while response factors of polyglycerols with a degree of polymerisation of at least 3 could be reliably estimated according to an effective carbon number (ECN) approach. The validity of the method applied to PGPR samples was further supported on the basis of a mass balance considering the experimentally determined polyglycerol and fatty acid content. Moreover, recoveries of di-, tri-, tetra- and pentaglycerol were more than 95% for various PGPR samples added to two different lipid matrices at 2 wt% and 5 wt% concentrations. Furthermore, the method proved to be very repeatable (with relative standard deviation values below 2.2%). On the other hand, the inevitable presence of glycerol in the lipid samples caused fouling of the detector and column overloading, requiring frequent cleaning of the detector and trimming off part of the column.