Long-term prognosis for teeth with external cervical resorption based on periapical images and cone beam CT: A clinical study.

AIM: To evaluate whether supplemental information from CBCT changed long-term prognosis for teeth with external cervical resorption (ECR) compared to periapical (PA) images. Furthermore, to assess predictive findings in PA images and evaluate which findings in CBCT affected the long-term prognosis of teeth with ECR. METHODOLOGY: One hundred and ninty-four patients, mean age 41.2, range 13-81, having 244 teeth with ECR were included. An initial long-term prognosis determined either good or poor was established based on intraoral images. Afterwards, the patients underwent CBCT, and final long-term prognosis was decided. From the PA images and CBCT, ECR using Heithersay's classification system, pulp involvement and extension of ECR was assessed. In CBCT, the number of surface lesion(s) was additionally assessed. Descriptive statistics evaluated changes in long-term prognosis after CBCT. Logistic regression analyses tested if findings in PA images and CBCT affected the long-term prognosis. RESULTS: Based on CBCT, out of 244 teeth the long-term prognosis was assessed to be poor for 173 (70.9%) teeth and good for 71 (29.1%) teeth. The long-term prognosis changed in 76 (31.1%) teeth after CBCT; 5 (2.0%) changed from poor to good, and 71 (29%) changed from good to poor long-term prognosis. In 81 (33.2%) teeth the H-class increased, and in 10 (4.1%) teeth the H-class decreased after assessing CBCT. In 70 (28.7%) teeth, there was a change from no pulp involvement to involvement of the pulp after CBCT; eight (3.3%) teeth changed in the opposite direction. H-class 2 and 4 in PA images significantly increased the probability for a change in long-term prognosis compared to an H-class 3 (p < .05). H-class 4, pulp involvement, ECR in the oral 1/3 of the root, and more than two surface lesions seen in CBCT significantly influenced a poor long-term prognosis (p < .05). CONCLUSIONS: Supplemental information from CBCT changed long-term prognosis in almost one third of teeth with ECR. In most cases, the long-term prognosis changed from good to poor. H-class 3 in PA images had a significant influence on change in long-term prognosis. Several findings in CBCT influenced a poor long-term prognosis.

Risk factors for noncarious cervical lesions: A case-control study.

OBJECTIVES: Noncarious cervical lesions (NCCLs) are multifactorial and can be caused by the anatomical structure of the teeth, erosion, abrasion and abnormal occlusion. The aim of this case-control study was to explore the risk factors for NCCLs. METHODS: Cone-beam computed tomography was used to determine whether a wedge-shaped defect existed at the cementoenamel junction. We compared 63 participants with NCCLs with 63 controls without NCCLs, matched for sex, age (±1 year) and toothbrushing-related factors (e.g., type of bristle and brushing patterns, frequency and strength). All participants were asked to complete a questionnaire about self-administered daily diet habits and health condition. Univariate and multivariate logistic regression analyses were conducted to determine the risk factors for NCCLs. RESULTS: Significant variables in the univariate analysis (i.e., p < .2) included frequency of carbonated beverage consumption, sella-nasion-point B angle (SNB) and Frankfort-mandibular plane angle (FMA). Multivariate logistic regression demonstrated that the consumption frequency of carbonated beverages (odds ratio [OR] = 3.147; 95% confidence interval [CI], 1.039-9.532), FMA (OR = 1.100; 95% CI, 1.004-1.204) and SNB (OR = 0.896; 95% CI, 0.813-0.988) was independent influencing factors. The area under the receiver operating characteristic curve (AUC) value of regression Model 1 (established with the frequency of carbonated beverage consumption, FMA, SNB and sleep bruxism) was 0.700 (95% CI, 0.607-0.792; p < .001), and that of regression Model 2 (established using the frequency of carbonated beverage consumption, FMA and SNB) was 0.704 (95% CI, 0.612-0.796; p < .001). CONCLUSIONS: The consumption frequency of carbonated beverages and FMA was risk factors for NCCLs; the higher the frequency of carbonated beverage consumption and FMA, the higher was the probability of NCCLs. SNB was a protective factor for NCCL occurrence; the larger the SNB, the lower was the probability of NCCL occurrence. These findings have further clarified the aetiology of NCCLs and provided clinicians with valuable insights into strategies for preventing the loss of dental tissue.

Cone beam computed tomography assessment of maxillary anterior teeth cervix dimensions in healthy adults for optimal anatomic healing abutments.

OBJECTIVES: The abutments produced with circular symmetry failed to accurately replicate the natural teeth's cervical shapes. The purpose of this study was to measure cervical cross-sections of maxillary anterior teeth using cone beam computed tomography (CBCT) images to design anatomic healing abutments. MATERIALS AND METHODS: CBCT data of 61 patients were analyzed using Ez3D Plus software. Measurements were taken at the cemento-enamel junction (CEJ) and 1 mm coronal to CEJ for maxillary central incisors, lateral incisors, and canines. Various parameters, including area, perimeter, and eight line segments in the distal (a), disto-palatal (b), palatal (c), mesio-palatal (d), mesial (e), mesio-labial (f), labial (g), and disto-labial (h) directions, were used to describe dental neck contours. The ratios (f/b and h/d) were analyzed, and differences based on sex and dental arch morphology were explored. RESULTS: Significant differences were found in area and perimeter between males and females, but not in f/b and h/d ratios. Differences in the f/b ratio were observed among dental arch morphologies for maxillary central incisors, lateral incisors, and canines. CONCLUSIONS: CBCT measurements of cervical cross-sections provide more accurate data for designing anatomic healing abutments. The fabrication of anatomical healing abutments needs to consider the influence of gender on cervical size and to explore the potential effect of arch shape on cervical morphology. CLINICAL SIGNIFICANCE: The novel method provides detailed measurements for the description of dental cervical contours for patients with bilateral homonymous teeth missing. The measurements of this study could be utilized to design more accurate anatomic healing abutments to create desired morphology of peri-implant soft tissue.

Evaluation of the relationship between periodontal bone destruction and mesial root concavity of the maxillary first premolar.

BACKGROUND: The purpose of this study was to investigate the morphology of maxillary first premolar mesial root concavity and to analyse its relation to periodontal bone loss (BL) using cone beam computed tomography (CBCT) and panoramic radiographs. METHODS: The mesial root concavity of maxillary premolar teeth was analysed via CBCT. The sex and age of the patients, starting position and depth of the root concavity, apicocoronal length of the concavity on the crown or root starting from the cementoenamel junction (CEJ), total apicocoronal length of the concavity, amount of bone loss both in CBCT images and panoramic radiographs, location of the furcation, length of the buccal and palatinal roots, and buccopalatinal cervical root width were measured. RESULTS: A total of 610 patients' CBCT images were examined, and 100 were included in the study. The total number of upper premolar teeth was 200. The patients were aged between 18 and 65 years, with a mean age of 45.21 ± 13.13 years. All the teeth in the study presented mesial root concavity (100%, n = 200). The starting point of concavity was mostly on the cervical third of the root (58.5%). The mean depth and buccolingual length measurements were 0.96 mm and 4.32 mm, respectively. Depth was significantly related to the amount of alveolar bone loss (F = 5.834, p = 0.001). The highest average concavity depth was 1.29 mm in the group with 50% bone loss. The data indicated a significant relationship between the location of the furcation and bone loss (X2 = 25.215, p = 0.003). Bone loss exceeded 50% in 100% of patients in whom the furcation was in the cervical third and in only 9.5% of patients in whom the furcation was in the apical third (p = 0.003). CONCLUSIONS: According to the results of this study, the depth of the mesial root concavity and the coronal position of the furcation may increase the amount of alveolar bone loss. Clinicians should be aware of these anatomical factors to ensure accurate treatment planning and successful patient management.

Progression of non-carious cervical lesions: 3D morphological analysis.

OBJECTIVES: This longitudinal study aimed to investigate morphologically and quantitatively the progression of non-carious cervical lesions (NCCLs) using a confocal laser scanning microscope (CLSM) and replica models. MATERIALS AND METHODS: The samples examined comprised sets of replicas annually obtained from 83 lesions in 16 participants over 3 to 5 years. All lesions were visually categorized as wedge-shaped, saucer-shaped, or mixed-shaped lesions. CLSM images of the replicas were analyzed in terms of axial depth, occlusogingival width (height) in the buccolingual cross-section, and estimated volume using a custom code of the image analysis software to estimate the progression of the NCCLs over time. The morphological characteristics of the NCCLs were also objectively divided into three groups according to the depth to height ratio (D/H ratio). Fisher's exact test and the Cochran-Armitage trend test were used for statistical analysis. RESULTS: Saucer-shaped lesions progressed mainly in height, whereas wedge-shaped lesions increased both in height and depth. Annual progression in depth and volume significantly increased as the D/H ratio increased. More than half of the NCCLs with a small D/H ratio progressed 50 µm or more in height, whereas none of them progressed more than 50 µm in depth. Annual progression in depth significantly increased as the lesion depth at baseline increased. CONCLUSIONS: Progression patterns significantly differed between NCCLs of different shapes. Most NCCLs progressed slowly in depth regardless of their shape. Moreover, NCCLs may progress through active and inactive stages.

Low torque is a risk factor for non-carious cervical lesions (NCCLs) in maxillary premolars.

PURPOSE: To determine the prevalence of non-carious cervical lesions (NCCLs) in maxillary premolars of different torques and simulated cervical stress profiles of the premolars under coincident loadings using finite element analysis (FEA). METHODS: The CBCT scans of 616 maxillary premolars from 154 subjects were retrospectively evaluated. The premolars were ascribed into low torque group (LTG) <-10.9°, medium torque group (MTG) -10.9° to -3.9°, and high torque group (HTG) >-3.9°, when the torque was referring to the occlusion plane. The prevalence of NCCLs in each group was evaluated. Then finite element models of a maxillary first premolar, its adjacent teeth and alveolar bone were established. The models were prepared with ANSYS software generating the premolars presenting different torques. The mastication scenario for the premolars in maximum intercuspation position was simulated. RESULTS: The prevalence of NCCLs was 15.7% in LTG, 7.9% in MTG and 5.5% in HTG. The prevalence of LTG was significantly higher than that of MTG (P< 0.05) and HTG (P< 0.01). As for FEA, the stresses at the buccal necks of the premolars basically increased with decrease of the torque. The tensile stress peaks were in the cemento-enamel junction in most premolars of the LTG, while in the middle of the crowns in premolars of MTG and HTG. CLINICAL SIGNIFICANCE: Low torque with excessive lingual inclination is a risk factor for NCCLs of maxillary premolars, and excessive tensile stress concentration in buccal necks during mastication may be responsible for that.

The precision of gingival recession measurements is increased by an automated curvature analysis method.

BACKGROUND: The extent of gingival recession represents one of the most important measures determining outcome of periodontal plastic surgery. The accurate measurements are, thus, critical for optimal treatment planning and outcome evaluation. Present study aimed to introduce automated curvature-based digital gingival recession measurements, evaluate the agreement and reliability of manual measurements, and identify sources of manual variability. METHODS: Measurement of gingival recessions was performed manually by three examiners and automatically using curvature analysis on representative cross-sections (n = 60). Cemento-enamel junction (CEJ) and gingival margin (GM) measurement points selection was the only variable. Agreement and reliability of measurements were analysed using intra- and inter-examiner correlations and Bland-Altman plots. Measurement point selection variability was evaluated with manual point distance deviation from an automatic point. The effect of curvature on manual point selection was evaluated with scatter plots. RESULTS: Bland-Altman plots revealed a high variability of examiner's recession measurements indicated by high 95% limits of agreement range of approximately 1 mm and several outliers beyond the limits of agreement. CEJ point selection was the main source of examiner's variability due to smaller curvature values than GM, i.e., median values of - 0.98 mm- 1 and - 4.39 mm- 1, respectively, indicating straighter profile for CEJ point. Scatter plots revealed inverse relationship between curvature and examiner deviation for CEJ point, indicating a threshold curvature value around 1 mm- 1. CONCLUSIONS: Automated curvature-based approach increases the precision of recession measurements by reproducible measurement point selection. Proposed approach allows evaluation of teeth with indistinguishable CEJ that could be not be included in the previous studies.

Swept-source optical coherence tomographic observation on prevalence and variations of cemento-enamel junction morphology.

To investigate the prevalence of different patterns of cemento-enamel junction (CEJ) morphology under swept-source optical coherence tomography (SS-OCT). One hundred extracted human teeth were used consisting of incisors, premolars, and molars. Each sample was observed for every 500 µm circumferentially along CEJ and OCT images of the pattern were noted. Microscopic observations were done for the representative sample using confocal laser scanning microscope (CLSM) and transmission electron microscope (TEM). The OCT images exhibited four CEJ patterns: edge-to-edge (type I), exposed dentin (type II), cementum overlapping enamel (type III), and enamel overlapping cementum (type IV). The prevalence of CEJ patterns was further statistically considered for mesial, distal, buccal, and lingual surfaces. The real-time imaging by SS-OCT instantly determined CEJ morphology. CLSM and TEM observation revealed morphological features along CEJ, which corresponded to OCT images of CEJ anatomy. OCT results showed 56.8% of type I pattern predominantly found on proximal surfaces, followed by 36.5% of type II pattern on buccal and lingual surface, 6.4% of type III pattern, and 0.3% of type IV pattern. There was a significant difference in prevalence of CEJ patterns among different types of teeth, but there was no statistically significant difference among the four surfaces in each type of teeth. OCT is a non-invasive diagnostic tool to examine the CEJ patterns along the entire circumference. OCT observation revealed even minor dentin exposure that would need clinical and home procedures to prevent any symptoms.

Sex-related differences in the distance of the mental foramen to the cementoenamel junction in adults: a study using cone beam computed tomography.

Injury to the contents of the mental foramen (MF) can be minimized by using cone beam computed tomography (CBCT) to determine the exact location of the MF prior to surgical procedures. In this retrospective study, variations in the vertical position of the MF between adult men and women older than 18 years were investigated using CBCT. The distance between the superior border of the MF and the most apical aspect of the cementoenamel junction (CEJ) of the mandibular second premolar was measured. Among the randomly accessed CBCT records of 200 patients, 176 MF-CEJ measurements met the inclusion criteria. There was a statistically significant difference (P < 0.001) between the sexes in the location of the MF. The distance in women was shorter by an average of 2.00 mm, irrespective of the side of the mandible. Additionally, a within-sex asymmetry between right and left sides was observed; the asymmetry was significantly greater in men than in women (P < 0.05). Clinicians should be cognizant of the influence of the patient's sex on the vertical position of the MF and the presence of asymmetry in the position of the MF between the right and left sides of the mandible within the sex groups.

Correlation between buccal and alveolar bone widths at the central incisors according to cone-beam-computed tomography.

OBJECTIVE: The aim of this study is to assess whether there is a correlation between buccal bone thickness and mean alveolar bone thickness around the central teeth using CBCT images. MATERIALS AND METHODS: Three points were selected at 3, 6 and 9 mm from the cemento-enamel junction, respectively, perpendicular to the long axis of the measuring points made to determine the width of the alveolar bone ridge. The arithmetic mean of the length measurements was taken as the average alveolar bone thickness. To determine the average buccal alveolar bone thickness, the buccal bone length was measured perpendicular to the long axis of the tooth from these 3 points, and the average of the measurements was taken from these 3 points. RESULTS: The mean coronal, mid-root, and apical third root widths of the maxillary, left central incisors were 7.72±0.60, 8.64 ± 0.93, and 9.23±1.45 mm, respectively and the mean widths of the buccal alveolar bone at the coronal, mid-root, and apical third root positions of the left central incisor were 1.18±0.39, 1.15±0.44, and 1.06±0.50 mm, respectively. The Spearman correlation coefficients were 0.194 and 0.191 for the left and right central incisors, respectively. CONCLUSIONS: There was no statistically significant difference between the alveolar bone thickness averages of the left and right central incisors, but the alveolar bone thickness was found to be thicker in males than females. Although the mean of alveolar and buccal bone thicknesses was positively correlated the statistical analysis demonstrated the correlation between the mean of alveolar and buccal bone thicknesses is not significant.

External cervical resorption-part 1: histopathology, distribution and presentation.

External cervical resorption (ECR) is the loss of dental hard tissue as a result of odontoclastic action. It is a dynamic process that involves periodontal, dental and in later stages pulpal tissues. Over the last two decades, ECR has attracted increased interest; this is in part due to novel micro-CT and histopathological techniques for its assessment and also improved radiographic detection using CBCT. This literature review will cover the aetiology, potential predisposing factors, histopathology and diagnosis of ECR. Part 2 will cover the management of ECR.

Anatomic assessment of the mandibular buccal shelf for miniscrew insertion in white patients.

INTRODUCTION: Cortical bone thickness, bone width, insertion depth, and proximity to nerves are important factors when planning and placing orthodontic miniscrews. The objective of this study was to anatomically assess the mandibular buccal shelf in a white patient population as the insertion site for orthodontic miniscrews by investigating these 4 variables. METHODS: Measurements were made on cone-beam computed tomography scans of 30 white patients (18 girls, 12 boys; mean age, 14.5 ± 2 years). All measurements were taken adjacent to the distobuccal cusp of the first molar, and the mesiobuccal and distobuccal cusps of the second molar. Additionally, bone depth was measured at 2 height levels, 4 and 8 mm from the cementoenamel junction. Stereolithographic models of patients were superimposed on the cone-beam computed tomography volumes to virtually create an outline of the soft tissue on the cone-beam computed tomography image to allow identification of the purchase point height (mucogingival junction). The inferior alveolar nerve was digitally traced. Miniscrews (1.6 × 10 mm) were virtually placed at the buccal shelf, and their insertion depths and relationships to the nerve were assessed. Analysis of variance with post hoc analysis was used for data analysis. RESULTS: Insertion sites and measurement levels had significant impacts on both cortical bone thickness and bone width. Cortical bone thickness was typically greatest at the distobuccal cusp of the second molar. Bone width was also greatest at the distobuccal cusp of the second molar 8 mm from the cementoenamel junction. The greatest insertion depth was found again at the distobuccal cusp to the second molar, whereas the miniscrews had the greatest proximity to the nerve at this site also. CONCLUSIONS: The distobuccal cusp level of the mandibular second molar is the most appropriate site for miniscrew insertion at the buccal shelf in white patients.

Assessment of Bone Dimensions in the Anterior Maxilla: A Cone Beam Computed Tomography Study.

PURPOSE: To evaluate labial and palatal bone thickness at the maxillary anterior teeth as well as distance from cemento-enamel junction (CEJ) to bone crest using cone beam computed tomography (CBCT). MATERIALS AND METHODS: Measurements were obtained for maxillary anterior teeth of 120 subject CBCT volumes including thickness of labial and palatal plates of bone (coronal, middle, and apical thirds), and distance between CEJ and alveolar bone crest mid-labially, mesially, and distally. RESULTS: The mean value of bone thickness at coronal, middle, and apical thirds of the labial side for central incisor roots were respectively: 0.73, 0.69, 0.60 (mm), for lateral incisors: 0.70, 0.61, 0.49 (mm), and for canines: 0.74, 0.53, 040 (mm). The thickness of palatal bone was significantly larger. The mean distance between CEJ and mid-labial bone crest for all sites was 2.16 mm. CONCLUSION: Labial bone thickness is thin in the vast majority of maxillary anterior teeth. Use of CBCT facilitates planning for immediate implant placement and is helpful in the decision-making process when further bone augmentation is needed.

Nonsurgical Management and 2-year Follow-up by means of Cone Beam Computed Tomography of an Invasive Cervical Resorption in a Molar.

BACKGROUND: Invasive cervical resorption (ICR) is a relatively uncommon form of external tooth resorption, characterized by an invasive nature. It is usually painless and detection of lesions is often made incidentally. Three-dimensional imaging techniques, such as cone beam computed tomography (CBCT), are useful in the diagnosis and management of ICR as the true extent of the defect cannot always be estimated using conventional radiographs. AIM: The aim of this article is to report on the successful treatment of ICR in mandibular first molar by nonsurgical approach and follow-up by means of CBCT. CASE REPORT: An 18-year-old patient was referred with a complaint of unusual radiolucency in the mesial cervical area of tooth #19 with unknown etiology. Cone beam computed tomography was performed to assess the extent of the lesion in three spatial levels and diagnosis of Heithersay class III ICR was made. This case presented with ICR (Heithersay class III) on tooth #19. Nonsurgical root canal treatment and removal of the lesion from the coronal access was performed; the resorptive defect was filled with dual-cure, self-adhesive, resin-modified glass ionomer cement (RMGIC); 6-month follow-up X-ray film showed no changes at the lesion site and tooth was asymptomatic; 1-year follow-up X-ray film showed slight mesial bone loss and a probing depth of 3 mm; finally, 2-year follow-up CBCT images showed no recurrence and no further bone destruction at the lesion site. CONCLUSION: The intraoral radiographs revealed the resorptive changes in two dimensions; therefore, the actual extent and location of the lesions are not fully understood. On the contrary, CBCT is a very useful tool to achieve a proper diagnosis; it detects the extent of the defect more accurately and hence, improves the treatment outcomes of ICR. CLINICAL SIGNIFICANCE: The ICR is usually seen as a late complication to traumatic injuries of the teeth; it is essential, therefore, that the patients who were exposed to situations that can damage the integrity of periodontal tissue need to have careful periodic recalls and X-ray examinations.

Understanding external cervical resorption patterns in endodontically treated teeth.

AIM: To understand the patterns of external cervical resorption (ECR) in endodontically treated teeth. To compare characteristics and mechanisms of ECR in root filled teeth with those established in teeth with vital pulps. METHODOLOGY: Seven cases of endodontically treated permanent teeth displaying ECR were investigated. ECR diagnosis was based on clinical findings and radiographic examination with cone-beam computed tomography. The extracted teeth were further analysed by a nano-focus computed tomographic (nano-CT) system, hard-tissue histology and scanning electron microscopy (SEM). To make a comparison with teeth with vital pulps, representative cases with ECR were also included. RESULTS: All endodontically treated teeth had a similar ECR pattern. This pattern reflected many similarities to that seen in teeth with vital pulps; that is, three stages were observed namely initiation, resorption and repair. In particular, during the initiation stage (1st stage), the resorption started below the gingival epithelial attachment, at the level of cementum. In the resorption stage (2nd stage), ECR spreads towards the treated pulp space and in a coronal-apical direction, creating multiple resorption channels. The pulp and the pericanalar resorption resistant sheet (PRRS) had been removed during root canal treatment and thus offered no retarding or defence mechanism towards ECR. In the reparative stage (3rd stage), reparative hard-tissue formation occurred at a localized scale. CONCLUSIONS: Similar ECR patterns were observed in all examined teeth. These patterns consisted of an initiation, a resorption and a reparative stage. Some differences were noticed between endodontically treated and teeth with vital pulps, mainly in the resorption and reparative stages. The resorption stage in root filled teeth was more intense than the repair stage, as many clastic cells and abundant granulation tissue were observed in all samples. This is possibly due to the absence of the pulp and protective PRRS layer and/or to the altered chemical composition of the root dentine after root canal treatment. Furthermore, at the repair stage, formation of reparative bonelike tissue took place to a lesser extent in root filled teeth.

Evaluation of Impacting Factors on Facial Bone Thickness in the Anterior Maxillary Region.

BACKGROUND: The goal of the current study was to measure the width of the labial alveolar bone of the overlying maxillary anterior teeth, based on cone-beam computed tomography (CBCT) images, and the distance between cementoenamel junction (CEJ) and bone crest in adult patients. METHODS: A cross-sectional study was performed using a sample of 132 tomographic scans. Intact maxillary anterior with healthy periodontium and teeth was randomly selected and afterwards assessed by 2 calibrated and independent reviewers. RESULT: The average bone thickness at 2 mm from the CEJ of the maxillary right central incisors was 0.63 ±â€Š0.69 mm and over the maxillary left central incisors was 0.59 ±â€Š0.71 mm. Moreover on the right and left lateral maxillary incisors, the crestal bone width averaged 0.64 ±â€Š0.81 and 0.61 ±â€Š0.7 mm, respectively. Concerning the maxillary canine region on both sides, the crestal bone thickness averaged 0.72 ±â€Š0.9 and 0.66 ±â€Š0.69 mm, in the maxillary right and left the canine regions, respectively. Furthermore, according to the gender and systemic disease, there were some recognizable differences in the facial bone thickness between the left and the right side. CONCLUSIONS: The current study has advocated the outcome of a mostly thin buccal bone overlying the maxillary anterior teeth; hence, clinicians should always consider the thickness of the facial cortical plate of the extraction site and the positioning of the implant placement in the socket.

Effect of Eruption Status of the Mandibular Third Molar on Distal Caries in the Adjacent Second Molar.

PURPOSE: To analyze the effect of the eruption status of the mandibular third molar (MTM) on distal caries in the mandibular second molar (MSM) by cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Five hundred CBCT images of MTMs from 469 patients were evaluated. Presence of distal caries in MSMs, impaction depths and angulations of MTMs, cementoenamel junction (CEJ) distances between distal MSMs and mesial MTMs, presence of pericoronitis in MTMs, and patient characteristics (age and gender) were assessed. Data were analyzed by χ(2) test, univariate and multivariate logistic regression analyses, and Spearman correlation analysis. Descriptive and bivariate statistics were computed and the P value was set at .05. RESULTS: The overall prevalence of distal caries in the MSM was 52.0%. According to the classification of Pell and Gregory, position A was the impaction depth at which most distal caries in MSMs were present (P = .036). For angulation of the MTM, when mesial angulations were 43° to 73°, MSMs developed more distal caries (P < .0001). For the CEJ distance between the distal MSM and the mesial MTM, when distances ranged from 6 to 15 mm, distal caries in MSMs occurred more frequently (6 to 8 mm, P < .0001; 8 to 15 mm, P = .037). Furthermore, there was a linear correlation between angulation of the MTM and the CEJ distance between the distal MSM and the mesial MTM (P < .0001). CONCLUSIONS: Impaction depth and angulation of the MTM are associated with distal caries in the MSM. Angulation of the MTM is more stable and reliable than the CEJ distance between the distal MSM and the mesial MTM for the estimation of risk factors related to the MTM.

A cross-sectional study of the associations between periodontitis and carotid arterial calcifications in an elderly population.

OBJECTIVE: To evaluate if the presence of periodontitis is associated with carotid arterial calcifications diagnosed on panoramic radiographs in an elderly population. MATERIALS AND METHODS: Study individuals were randomly selected from the Swedish civil registration database representing the aging population (60-96 years) in Karlskrona, Sweden. Bleeding on probing (BOP) and the deepest probing measurement at each tooth were registered. The proportions of teeth with a probing depth ≥ 5 mm and the proportion of teeth with bleeding on probing were calculated. Analog panoramic radiographs were taken and the proportion of sites with a distance ≥ 5 mm between the alveolar bone level and the cement-enamel junction (CEJ) were assessed. A diagnosis of periodontitis was declared if a distance between the alveolar bone level and the CEJ ≥ 5 mm could be identified from the panoramic radiographs at > 10% of sites, probing depth of ≥ 5 mm at one tooth or more and with BOP at > 20% of teeth. RESULTS: Readable radiographs were obtained from 499 individuals. Carotid calcification was identified in 39.1%. Individuals were diagnosed with periodontitis in 18.4%. Data analysis demonstrated that individuals with periodontitis had a higher prevalence of carotid calcifications (Pearson χ(2) = 4.05 p < 0.05) and with a likelihood of 1.5 (95% CI = 1.0, 2.3, p < 0.05). CONCLUSIONS: Data analysis demonstrated a significant association between periodontitis and carotid calcification.

Evaluation of marginal alveolar bone in the anterior mandible with pretreatment and posttreatment computed tomography in nonextraction patients.

INTRODUCTION: Our objectives were to evaluate marginal alveolar bone height in the anterior mandible after orthodontic treatment and to assess any correlations between morphologic and treatment changes. METHODS: We used 57 pretreatment and posttreatment cone-beam computed tomography images (17 male and 40 female subjects; 22 Class I, 35 Class II; average age, 18.7 ± 10.8 years; average treatment time, 22.7 ± 7.3 months) to measure cortical bone thickness, ridge thickness, distance from the apex to the labial cortical bone, and the distance from the cementoenamel junction to the marginal bone crest. Changes in the cementoenamel junction to the marginal bone crest distance were correlated with pretreatment measurements and treatment changes. RESULTS: Although there were great variations, the average facial and lingual vertical bone losses were 1.16 ± 2.26 and 1.33 ± 2.50 mm, respectively. The incisor-mandibular plane angle changes were also highly variable, averaging 2.4°. CONCLUSIONS: Orthodontic treatment causes changes in alveolar bone height and cortical bone thickness around the mandibular incisors. Although pretreatment cortical bone thickness, ridge width thickness, and specific tooth movements all play roles in what happens to the bone during treatment, incisor inclination was not correlated with alveolar bone height changes.

In Vitro Assessment of Enamel Permeability in Primary Teeth with and without Early Childhood Caries Using Laser Scanning Confocal Microscope.

OBJECTIVE: To compare the permeability of the enamel of primary teeth from individuals free of Early Childhood Caries (ECC) with that from individuals affected with ECC by assessment of dye penetration using Laser Scanning Confocal Microscope (LSCM). STUDY DESIGN: Experimental in vitro study. Exfoliated primary maxillary anterior teeth (n = 44) were collected and divided into two groups (n=22 per group): samples with ECC (Group 1) and without ECC (Group 2). The samples were immersed in Rhodamine B dye solution for 1 day, cut longitudinally into 3 sections, observed using LSCM. Dye penetration depths in the incisal, middle, cervical thirds and on labial, lingual surfaces were recorded. Data were analyzed by the Mann-Whitney test (α = 5%, p < .005). RESULTS: The overall mean penetration depth for group 1 (100.6 µm ± 58.48 µm) was significantly higher than that of group 2 (31.55 µm ± 23.40 µm, p < .000). Mean penetration depth in the incisal, middle, and cervical thirds and on the labial and lingual surfaces of group 1 also presented significantly higher scores than in group 2 (p < .005). CONCLUSION: There was significantly more dye penetration in the ECC group than in the non-ECC group. This could be related to a higher level of enamel permeability in teeth affected with ECC.