Tooth chipping prevalence and patterns in extant primates.

OBJECTIVES: A tooth chip occurs when a hard object forcefully contacts the surface of the tooth, typically removing enamel from the occlusal edge. In this study, chipping patterns in extant primates were compared, and hard-object-feeding assessed alongside other factors (e.g., grit mastication and dental properties), to elucidate dietary and behavioral inferences in archeological and paleontological samples. MATERIALS AND METHODS: Thirteen species of extant primates were studied, including eight species within the Cercopithecidae, two within the Ceboidea, and three within the Hominoidea. Four additional species were also incorporated from the literature for some of the analyses. The severity (Grade 1-3), position (buccal, lingual, mesial, and distal) and number of tooth fractures were recorded for each specimen. RESULTS: Species considered hard-object-feeding specialists presented higher rates of chipping, with sakis, mandrills, sooty mangabeys and Raffles' banded langurs having high chipping rates (28.3%, 36.7%, 48.4%, and 34.7% of teeth, respectively). Species that seasonally eat harder foods had intermediate chipping frequencies (e.g., brown woolly monkeys: 18.5%), and those that less commonly consume hard food items had the lowest chipping frequencies (e.g., Kloss gibbon: 7.3%; chimpanzees: 4.4%). DISCUSSION: The results suggest hard food mastication influences differences in chipping prevalence among the species studied. Although Homo fossil samples show high rates of chipping comparable to hard-object-feeding extant primates, they display a different pattern of chipping, supporting the hypothesis that these fractures are mostly non-food related (e.g., grit mastication in Homo naledi; non-masticatory tooth use in Neanderthals).

Radiotherapy impairs adhesive bonding in permanent teeth.

OBJECTIVES: To evaluate the in vitro effects of radiotherapy (RT) on the morphological surface of the enamel and dentin and to determine the best adhesive system and most appropriate time to restore teeth in head and neck cancer patients. METHODS: Sixty third molars were cut into 120 enamel fragments and 120 dentin fragments and divided into four groups (n = 30): G1 (control): nonirradiated, only restorative procedure; G2: restorative procedure immediately before RT; G3: restorative procedure immediately after RT; and G4: restorative procedure 6 months after RT. Each group was divided into two subgroups: Adper™ Single Bond 2 (SB) and Clearfill SE Bond (CL) based on the material used. After RT and restorative procedures, the specimens were subjected to confocal microscopy and shear bond strength test. Data were analyzed using a two-way ANOVA followed by Tukey's test at a significance level of 5%. RESULTS: Morphological changes were observed in both substrates after a cumulative dose of 40 Gy, and after 60 Gy, the changes were more evident in both substrates. CL had the highest strength values in both substrates (p < 0.05), and G2 had the lowest strength values for the enamel and dentin (p < 0.05). CONCLUSIONS: Based on the in vitro study results, we can conclude that RT substantially changes the morphological surface of enamel and dentin and impairs the bond strength. The Clearfill system yielded better results than Adper Single Bond 2, and restoring teeth before RT resulted in the worst results in both substrates.

Tooth fractures in the Krapina Neandertals.

Dental fractures can be produced during life or post-mortem. Ante-mortem chipping may be indicative of different uses of the dentition in masticatory and non-masticatory activities related to variable diets and behaviors. The Krapina collection (Croatia, 130,000 years BP), thanks to the large number of teeth (293 teeth and tooth fragments) within it, offers an excellent sample to investigate dental fractures systematically. Recorded were the distribution, position and severity of the ante-mortem fractures according to standardized methods. High frequencies of teeth with chipping in both Krapina adults and subadults suggest that the permanent and deciduous dentition were heavily subjected to mechanical stress. This is particularly evident when the frequencies of chipping are compared with those in modern humans (Upper Paleolithic and historic samples) that we analysed using the same methods. The distribution of chipping in the Krapina sample (anterior teeth are more affected) and its position (labial) suggest a systematic use of the anterior teeth for non-masticatory tasks.

Dental Pathology of the Iberian Lynx ( Lynx pardinus), Part I: Congenital, Developmental, and Traumatic Abnormalities.

The Iberian lynx is an endangered felid that has been subject to an intensive ongoing conservation program in an attempt to save it from extinction. Identification of dental pathologies could play an important role in the survival of this endangered species. The objective of this study is to evaluate the dental pathologies (congenital, developmental, and traumatic abnormalities) of this species of felid. Skulls of 88 adult specimens of the Iberian lynx ( Lynx pardinus) from the Doñana Biological Station [Estación Biológica de Doñana-Consejo Superior de Investigaciones Científicas] (EBD-CSIC), Seville, Spain, were examined macroscopically, and full-mouth dental radiographs of all specimens were performed. Presence, absence, form of teeth, number of roots, supernumerary teeth, and persistent deciduous teeth were evaluated. The presence of attrition/abrasion, tooth fractures, enamel hypoplasia/hypomineralization, endodontic disease, intrinsically stained teeth, and other traumatic findings were also evaluated. Abnormal grooves and dilacerations were the most common abnormalities seen in the roots of teeth. Two hundred and fifteen fractured teeth (11.3% of evaluated teeth) were detected, and mainly complicated fractures were noted in maxillary canine teeth (24.2% of fractured teeth) and mandibular canine teeth (16.7% of fractured teeth). Endodontic disease was present in 3.9% of the teeth examined. Intrinsic tooth staining was assessed in 8.5% of evaluated teeth. Of all teeth examined, 831 teeth (43.7% of evaluated teeth) exhibited some type of attrition/abrasion. Our study concluded that there is a high prevalence of dental fractures and attrition/abrasion with associated endodontic disease that could lead to impaired hunting ability as well as a threat to overall health and subsequent survival of this endangered species.

Evaluation of Root Fracture in endodontically treated Teeth using Cone Beam Computed Tomography.

AIM: Our objective was to perform an in vitro evaluation of root fracture in endodontically treated teeth using two cone beam computed tomography (CBCT) machines. MATERIALS AND METHODS: The sample comprised 86 single-rooted human premolars that had been fractured by a universal testing machine. The tomographic images were acquired using an Orthopantomograph OP300® and an Orthophos XG 3D® and evaluated by three examiners, by means of specific software. The teeth were classified into presence or absence of root fracture, then the root third where the fracture occurred, was determined. With regard to the detection of the fracture, the Kappa statistic was used for intra and interexaminer repro-ducibility at two distinct points in time. Chi-squared test was employed to analyze the sensitivity and specificity of the two tomographs (p < 0.05). RESULTS: The results showed a good or excellent Kappa index between examiners. As for the absolute frequency, the sensitivity (0.6) of the Orthophos XG 3D® equipment was superior, while specificity (0.91) was higher with the Orthopantomograph OP300®. On the receiver operating characteristics curve, moderate performance was found with an accuracy of 0.73 (OrthopantomographOP300®) and 0.74 (Orthophos XG 3D®) respectively. As far as the location of the root fracture is concerned, moderate agreement was verified using the Kappa statistic (k = 0.56). CONCLUSION: Although the regular CBCTs represent the imaging examination of choice for assisting root fracture diagnosis in endodontically treated teeth, their performance in this study demonstrated an imprecise diagnosis of fractures in a good many cases, irrespective of the tomography machine used. CLINICAL SIGNIFICANCE: An early and precise detection of root fractures is of the utmost clinical importance, but the radiopaque and/or metallic filling materials in the CBCT viewing field may generate artifacts, known as the beam-hardening effect, which could compromise root fracture detection.

The Influence of Force Direction on the Fracture Pattern and Fracture Resistance of Canine Teeth in Dogs.

Biomechanical studies of the elongated canine tooth of animals are few, and thus our understanding of mechanical and physical properties of animal teeth is limited. The objective of the present study was to evaluate the influence of force direction on fracture resistance and fracture pattern of canine teeth in an ex vivo dog cadaver model. Forty-five extracted canine teeth from laboratory beagle dogs were standardized by hard tissue volume and randomly distributed among 3 force direction groups. The teeth were secured within a universal testing machine and a load was applied at different directions based on testing group. The maximum force to fracture and the fracture pattern classification were recorded for each tooth. After correcting for hard tissue cross-sectional area in a multivariate analysis, no significant difference in the amount of force required for fracture was apparent between the different force direction groups. However, the influence of force direction on fracture pattern was significant. The results of this study may allow the clinician to educate clients on possible causal force directions in clinically fractured teeth and, thus, help prevent any contributing behavior in the future.

Diagnoses and Treatment of Dental Disorders in a Research Colony of Macaca fascicularis: A Case Series.

During daily routine oral examinations in a research colony of nonhuman primates (NHPs, Macaca fascicularis), a variety of oral-dental lesions were identified. A dental care program was established based on these findings. Based on the presence of dental clinical signs and their severity, 31 animals were triaged to be examined and treated by a veterinarian. Clinical examination consisted of visual inspection using a periodontal probe/explorer and full or partial mouth dental radiographs. Treatment was performed during the same procedure. Some animals had a follow-up examination including radiographs months later. Four common dental diseases were diagnosed: periodontal disease, caries, tooth fracture, and tooth attrition. Less frequent were dental abscess, enamel hypomineralization, gingival hyperplasia, hypercementosis, tooth luxation, tooth dysplasia, root resorption, abrasion. Less severe periodontal disease was treated conservatively. If severely affected, teeth were extracted. Well-circumscribed caries without endodontic involvement were treated by composite restoration. Teeth with extensive caries and pulp involvement were extracted. Teeth with exposed pulp were treated via extraction or orthograde root canal treatment. In this case series, 27 (87%) of 31 NHPs exhibited at least 1 moderate to severe dental lesion that required treatment. The presumable improvement in welfare and weight of oral/dental lesions for the overall health status in research NHPs encourages us to continue this program prospectively.

Detection of artificially induced vertical root fractures of different widths by cone beam computed tomography in vitro and in vivo.

AIMS: To compare the diagnostic accuracy of cone beam computed tomography (CBCT) for the detection of artificially induced vertical root fractures (VRFs) of different widths in vitro and in vivo. METHODOLOGY: Vertical root fractures were induced in 25 extracted nonendodontically treated single-rooted human teeth (maxillary first premolars, maxillary canines and mandibular incisors). Twenty teeth without VRFs served as a control group. CBCT scanning (3D Accuitomo 170) was performed in vitro and in vivo. For the in vivo scanning, teeth were autoclaved, embedded into bite plates, placed in sterile plastic bags and then inserted into the mouths of volunteers. Teeth with VRFs were sectioned into axial slices and examined using a stereomicroscope to measure the widths of the VRFs. Five observers assessed the presence of VRFs using axial CBCT. Values for sensitivity, specificity, accuracy and interexaminer agreement were calculated. RESULTS: The accuracy, specificity and sensitivity of CBCT were significantly higher in vitro than in vivo for VRFs with widths 50-150 µm (P < 0.05). The sensitivity and accuracy of CBCT were significantly higher for the detection of VRFs with widths greater than 150 µm in vivo and in vitro (P < 0.05). The accuracy of CBCT in vivo was 0.29 and 0.8 for fracture widths ranging from 50 to 150 µm and wider than 150 µm, respectively. No significant differences in CBCT specificity were found between VRF widths both in vitro and in vivo. The interexaminer reliability of the raters revealed a kappa value of 0.72, demonstrating substantial agreement. CONCLUSION: The detectability of VRFs by CBCT in vitro and in vivo was dependent upon fracture width. The accuracy of CBCT in detecting VRFs of 50-300 µm width in vivo was significantly lower compared to the in vitro accuracy.

Assets and pitfalls of chemical and microscopic analyses on gunshot residues in skeletonized bodies: a report of five cases.

In case of gunshot wounds, forensic anthropologists and pathologists have many tools at hand, and the assistance that chemical and microscopic investigations can provide in such scenarios is often valuable and crucial. However, the results of such analyses in the search of gunshot residues (GSR) ought not to be acritically considered. We report five cases where chemical (sodium rhodizonate) and microscopic (scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX)) analyses were performed for the search of GSR. Four cases concerned the forensic field and analyses on buried, charred, or submerged remains, whereas one case concerned the historical remains of a soldier of the First World War. In every case, the search for GSR with these techniques showed their persistence even after long periods and preservation in peculiar environments. However, chemical analyses provided their contribution, but in two cases, anthropological analyses provided crucial and solving results. The five cases show the indisputable usefulness of chemical and microscopic analyses in the search of GSR in gunshot wounds and especially how such residues may survive in time and in adverse environmental conditions. However, experts should always be dubious about some pitfalls (such as contamination) one can frequently find in these scenarios.

The wear and tear of teeth.

A review is presented of the mechanical damage suffered by tooth crowns. This has been the subject of much recent research, resulting in a need to revise some of the thinking about the mechanisms involved. Damage is classified here by scale into macro-, meso- and microfracture. The focus is on the outer enamel coat because this is the contact tissue and where most fractures start. Enamel properties appear to be tailored to maximize hardness, but also to prevent fracture. The latter is achieved by the deployment of developmental flaws called enamel tufts. Macrofractures usually appear to initiate as extensions of tufts on the undersurface of the enamel adjacent to the enamel-dentine junction and extend from there into the enamel. Cracks that pass from the tooth surface tend to be deflected by an enamel region of high toughness; if they find the surface again, a chip (mesofracture) is produced. The real protection of the enamel-dentine junction here is the layer of decussating inner enamel. Finally, a novel analysis of mechanical wear (microfracture) suggests that the local toughness of the enamel is very important to its ability to resist tissue loss. Enamel and dentine have contrasting behaviours. Seen on a large scale, dentine is isotropic (behaving similarly in all directions) while enamel is anisotropic, but vice versa on a very small scale. These patterns have implications for anyone studying the fracture behaviour of teeth.

The Influence of Crown Height to Diameter Ratio on the Force to Fracture of Canine Teeth in Dogs.

Previous work suggests that the tooth height to diameter ratio (H/D) may have an influence on the fracture resistance of dog canine teeth. Thus, it can be hypothesized that canine teeth with distal abrasion or teeth already requiring pulpal manipulation may benefit from a reduction in height and that an ideal H/D exists that balances tooth fracture resistance and tooth function. Therefore, a study was performed to investigate the influence of H/D on force to fracture and probability of fracture of canine teeth in dogs. Thirty extracted canine teeth from laboratory Beagle dogs were standardized by hard tissue volume and evenly distributed among three groups; unaltered H/D (group A), 10% reduction in H/D (group B), and 20% reduction in H/D (group C). The teeth were potted in clear autopolymerizing orthodontic acrylic and then secured within a universal materials testing machine. A displacement was applied at a speed of 1-mm/min to the distoocclusal line angle at an angle of 45 degrees to the long axis of the crown. The maximum measured force at the time of fracture represented the maximum force to fracture. A linear regression model showed a significant inverse relationship between H/D and force to fracture (p = 0.043; 95% CI-55.2 to -0.09). A margin of safety (MoS) analysis was performed to determine the probability of fracture by comparing normal force distributions of the measured force at fracture to that reported in a previous study, representative of normal biting-pulling loads on canine teeth. When 100% of the load was applied to a single unaltered canine tooth the probability of fracture was 36.7%. Decreases in H/D of 10% and 20% resulted in a decreased probability of fracture by 24.1% and 60.4%, respectively. A paired MoS analysis was conducted wherein the applied loads were distributed across 2 maxillary canine teeth according to their relative heights. Within the pair, a 20% decrease in H/D decreased the probability of fracture of that tooth by 86.5%, but increased the probability of fracture of the unaltered contralateral canine tooth by 54.4%. The findings of this study support the hypothesis that teeth with a lower H/D are more resistant to fracture. However, given the potential impact of crown reduction of a single canine tooth on the load redistribution to the remaining unaltered canine teeth, further investigation is needed to determine what H/D would be ideal. In addition, future studies could elucidate in which clinical scenarios the concept of H/D reduction could be implemented. The results of this study may have implications on the successful long-term management of traumatized canine teeth in dogs.

Inferring biological evolution from fracture patterns in teeth.

It is hypothesised that specific tooth forms are adapted to resist fracture, in order to accommodate the high bite forces needed to secure, break down and consume food. Three distinct modes of tooth fracture are identified: longitudinal fracture, where cracks run vertically between the occlusal contact and the crown margin (or vice versa) within the enamel side wall; chipping fracture, where cracks run from near the edge of the occlusal surface to form a spall in the enamel at the side wall; and transverse fracture, where a crack runs horizontally through the entire section of the tooth to break off a fragment and expose the inner pulp. Explicit equations are presented expressing critical bite force for each fracture mode in terms of characteristic tooth dimensions. Distinctive transitions between modes occur depending on tooth form and size, and loading location and direction. Attention is focussed on the relatively flat, low-crowned molars of omnivorous mammals, including humans and other hominins and the elongate canines of living carnivores. At the same time, allusion to other tooth forms - the canines of the extinct sabre-tooth (Smilodon fatalis), the conical dentition of reptiles, and the columnar teeth of herbivores - is made to highlight the generality of the methodology. How these considerations impact on dietary behaviour in fossil and living taxa is discussed.

Healing responses following transverse root fracture: a historical review and case reports showing healing with (a) calcified tissue and (b) dense fibrous connective tissue.

BACKGROUND: The understanding and management of transverse intra-alveolar root fractures has evolved to its current high level of sophistication and clinical success from foundations laid down by histological studies as early as the mid-nineteenth century. SIGNIFICANCE: The aim of the review was to highlight those earlier histological reports and studies that have contributed to the current understanding of the biological processes involved in the healing of transverse root fractures. Healing of a transverse root fracture by calcified tissue was demonstrated histologically by Howe in 1926, while Boulger in 1928 showed the two other patterns of root fracture healing, namely the interposition of fibrous connective tissue and the interposition of bone and periodontal ligament around both fractured segments. Other major histological reports around that time came from members of the so-called 'The Vienna group of Illinois', who had a significant influence in the development of oral biology worldwide. Other important reports and an experimental study emanated from Germany and Switzerland in the late 30s and early 40s, followed in the 1950s and early 1960s by histological material principally from Sweden, Denmark, France, the USA and Britain. Jens Andreasen and Erik Hjörting-Hansen's landmark paper in 1967 included new histological reports and a classification of healing responses following transverse root fractures. The expansion of knowledge related to root fractures since that time has been exponential, with major contributions from Scandinavia and several other countries. CASE REPORTS: Accompanying the historical review are two case reports with histology of root fracture healing by (a) calcified tissue and (b) dense fibrous connective tissue. The role of the pulp and the periodontal ligament in the repair process is described and the clinical significance discussed with particular emphasis to diagnosis and orthodontic management.

Regenerative capability of dental pulp cells after crown fracture.

The purpose of this study was to evaluate the characteristics of dental pulp cells for tissue engineering derived from the fractured incisal portion of tooth crowns. Thirty Sprague-Dawley rats were used for histological and immunohistochemical analysis of nestin protein expression and to measure levels of mRNAs encoding osteocalcin, osteopontin, bone sialoprotein (BSP), dentin sialoprotein (DSP), heat shock protein (HSP) 27, vascular endothelial growth factor (VEGF), ATP-binding cassette transporter G2 (ABCG2), nestin, and p57(Kip2) . Odontoblasts at the incisal portion in the control group were oriented in a regular pattern, but those in the experimental group were randomly stratified. Immunohistochemically, only a few odontoblasts were positive for nestin at the incisal portion in the experimental group at 2 days. Some cells in the inner area in the control group were positive for nestin, but nestin-positive cells in the experimental group at the incisal portion were not observed. The mRNA expression for osteogenic or odontogenic markers in the experimental group was higher than in the control group. HSP27 mRNA expression in the experimental group at 2 days was higher than in the control group and in the experimental group at 7 days. mRNA expression of stem cell markers, such as ABCG2 and nestin, in the experimental group tended to decrease compared with the control. In conclusion, this study demonstrates that dental pulp stem cells derived from fractured teeth differentiate to osteogenic or odontogenic cells.

Noninvasive cross-sectional imaging of incomplete crown fractures (cracks) using swept-source optical coherence tomography.

AIM: To investigate the ability of swept-source optical coherence tomography (SS-OCT) to detect incomplete crown fractures (cracks) in extracted teeth. METHODOLOGY: Cracks were created by subjecting 30 porcine premolars to impaction by a steel rod plunging from the occlusal tip. SS-OCT images and stereomicroscopic photographs of the surface were acquired for each specimen before and after impaction. For evaluation, the focused light beam of SS-OCT was projected from three directions on the same plane: buccal or lingual, 45° to the mesial, and 45° to the distal. Histological sections were prepared after impaction, and length and width of cracks and lamellae were evaluated using the corresponding SS-OCT image. The values were analysed using Pearson's correlation coefficient. RESULTS: Through SS-OCT, cracks and lamellae were clearly detected as intensified scattering signals at the same position on the corresponding microphotographs and histological sections. Amongst the three scanning angles, the greatest lengths and widths were considered the corresponding values of SS-OCT and were used for analysis. Significant correlations regarding line length and width were observed between SS-OCT and histological sections (length: r = 0.65, P < 0.001; width: r = 0.60, P < 0.001). CONCLUSIONS: SS-OCT can clearly discriminate cracks, which appear as highlighted lines due to the scattering of light. The results obtained from the three scanning directions were correlated well with those of the histological sections.

Rehydration of a reattached fractured tooth fragment after prolonged dehydration.

Crown fractures of the anterior teeth are one of the most common outcomes of trauma to the orofacial region. The reattachment of dental fragments is a conservative treatment and should be considered a primary treatment choice in the restoration of anterior tooth fractures. This article presents a clinical technique for the restoration of a fractured maxillary lateral incisor by reattaching the tooth fragment that was kept in dry conditions for five days with the aid of adhesive dentistry. The esthetic compromise of white color (due to excessive dehydration of the segment) was reconciled after one month of service in the mouth by regaining the natural color by rehydration. The one-year clinical evaluation revealed a successful outcome for this technique, and the patient was pleased with the esthetic results of the conservative treatment modality.

Minimal Detectable Width of Tooth Fractures Using Magnetic Resonance Imaging and Method to Measure.

INTRODUCTION: Vertical root fracture (VRF) in root canal-treated (RCT) teeth is a common cause of pain, bone resorption, and tooth loss. VRF is also difficult to diagnose and measure. Magnetic resonance imaging (MRI) has the potential to identify VRF due to beneficial partial volume averaging, without using ionizing radiation. This investigation aimed to describe the narrowest VRFs detectable based on MRI, using micro-computed tomography (microCT) as the reference standard and proposes a method using profile integrals to measure the widths of small VRFs. METHODS: VRFs were induced in 62 RCT tooth root samples. All samples were imaged in a phantom using MRI and reference imaging was obtained using microCT. The stacks of 3-dimensional axial MRIs were assessed by 3 board-certified endodontists. Evaluators determined the most coronal slice within the stack that was discernible as the extent of the VRF. This slice was measured on correlated microCT sections to determine the minimum VRF width (µm) detectable using a profile integral-based method to measure small fractures and negate the effects of the point spread function. RESULTS: Using profile integrals to measure VRF width was repeatable and resulted in estimates that were on average 1 µm smaller than known reference widths. Adjusted median VRF width detected using MRI was 45 µm (first quartile: 26 µm, third quartile: 64 µm). CONCLUSION: Using profile integrals is a valid way to estimate small VRF width. The MRI approach demonstrated ability to repeatedly detect VRFs as small as 26 µm.

Effect of gamma irradiation and restorative material on the biomechanical behaviour of root filled premolars.

AIM: To investigate ex vivo the influence of gamma irradiation therapy and restorative material on fracture resistance, fracture mode and strain of root filled human premolars. METHODOLOGY: Sixty extracted human maxillary premolar teeth were randomly divided into six groups (n = 10) determined by two study factors: (i) restorative materials: sound teeth, root filled teeth restored with composite resin, root filled teeth restored with amalgam; (ii) gamma irradiation: irradiated (subjected to 60 Gy of gamma irradiation in daily increments of 2 Gy) and nonirradiated. For the strain gauge test, two strain gauges per sample were attached on the buccal and palatal cusp surfaces (n = 5). Strain values were recorded during loading of 0-150 N. Fracture resistance (N) was assessed in a mechanical testing machine (n = 10). Strain gauge for each cusp and fracture resistance data were analysed by two-way anova (3 × 2) followed by the Tukey's honestly significant difference test (α = 0.05). The failure mode was evaluated using an optical stereomicroscope and classified according to the location of the failure. RESULTS: Gamma radiation therapy significantly reduced the fracture resistance of intact teeth. The strain was higher for teeth restored with amalgam than for those restored with composite resin. The teeth restored with composite resin had similar strain values to sound teeth. Nonirradiated teeth had more restorable failures than irradiated teeth. CONCLUSIONS: Gamma irradiation significantly reduced fracture resistance and increased cusp strain. The use of composite resin resulted in better biomechanical behaviour than amalgam for restoring root filled teeth whether or not they were submitted to radiotherapy.

Apical surgery: endoscopic findings at the resection level of 168 consecutively treated roots.

AIM: Endoscopic evaluation of the cut root face after root-end resection during apical surgery. METHODOLOGY: Consecutive cases undergoing apical surgery from June 2006 to May 2008 were enrolled. After root-end resection, the cut root face was inspected with a rigid endoscope and the following findings were assessed: number of canals, presence of isthmus, presence and location of craze lines/cracks, frosted dentine, and gaps between root filling material and dentine. Craze lines/cracks, frosted dentine and gaps were further correlated with the age group of the patient (<45 vs. ≥ 45 years), the type of treated tooth and the presence or absence of a post/screw. RESULTS: The final material included 168 resected roots. The highest frequency of isthmuses was found in mesial roots of mandibular first molars (88.5%). A craze line/crack was seen in 9.5%, frosted dentine in 79.8% and gaps in 83.3% at the cut root faces. Significant differences were observed for the location of the microfindings at the resected root surfaces (buccal vs. mesial vs. lingual vs. distal, P > 0.0001). Premolars had significantly more craze lines/cracks than anterior teeth (P = 0.006) and molars (P = 0.000). Frosted dentine was significantly more frequently seen in premolars (P = 0.027) and molars (P = 0.001) compared to anterior teeth. The age groups and the presence or absence of a post/screw did not significantly influence the findings. CONCLUSIONS: Frosted dentine and gaps were frequently observed with endoscopy at the resected root surfaces. The type of tooth appeared to affect the occurrence of a craze line/crack and of frosted dentine.