Improving cellular uptake and synergetic anti-tumor effects of magnolol and Brucea javanica oil through self-microemulsion.

OBJECTIVE: Magnolol (MG) and Brucea javanica (L.) Merr. oil (BJO) possess synergetic anti-tumor effects, but have poor water solubility and stability, which results in low oral bioavailability. SIGNIFICANCE: The MG loaded self-microemulsion drug delivery system (MG-SMDDS) with BJO as oil phase component was utilized to improve the cellular uptake and synergetic anti-tumor effects. METHODS: Compatibility study and pseudoternary phase diagram (PTPD) were respectively employed to screen for the composition and proportion of oil phase in the formulation. Central composite design-effect surface method was applied to optimize proportion of each formulation condition. The droplet size, ζ-potential, colloid stability, encapsulation rate (ER) and in vitro dissolution rate of MG-SMDDS were evaluated. Furthermore, cellular uptake and cytotoxicity of the microemulsion on HepG2 cells were assessed. RESULTS: The optimal composition of MG-SMDDS was: MG (9.09%), castor oil (7.40%), BJO (2.47%), Cremophor EL 35 (54.04%) and 1, 2-propanediol (27.01%). The MG-SMDDS exhibited satisfactory droplet size, ζ-potential, colloid stability and ER, as well as faster dissolution rate than free MG. More importantly, SMEDDS containing BJO could enhance the cellular uptake and cytotoxicity of free BJO and free MG on tumor cells. CONCLUSIONS: The BJO self-microemulsion delivery technique can provide an idea for design of oral delivery vehicles based on BJO.

Preparation, characterisation, and pharmacodynamic study of myricetin pH-sensitive liposomes.

AIMS: Myricetin (MYR) was incorporated into pH-sensitive liposomes in order to improve its bioavailability and anti-hyperuricemic activity. METHODS: The MYR pH-sensitive liposomes (MYR liposomes) were prepared using thin film dispersion method, and assessed by particle size (PS), polydispersed index (PDI), zeta potential (ZP), encapsulation efficiency, drug loading, and in vitro release rate. Pharmacokinetics and anti-hyperuricemic activities were also evaluated. RESULTS: The PS, PDI, ZP, encapsulation efficiency, and drug loading of MYR liposomes were 184.34 ± 1.05 nm, 0.215 ± 0.005, -38.46 ± 0.30 mV, 83.42 ± 1.07%w/w, and 6.20 ± 0.31%w/w, respectively. The release rate of MYR liposomes was higher than free MYR, wherein the cumulative value responded to pH. Besides, the Cmax of MYR liposomes was 4.92 ± 0.20 µg/mL. The level of uric acid in the M-L-H group (200 mg/kg) was reduced by 54.74%w/v in comparison with the model group. CONCLUSION: MYR liposomes exhibited pH sensitivity and could potentially enhance the oral bioavailability and anti-hyperuricemic efficacy of MYR.

Preparation of astaxanthin-loaded composite micelles with coaxial electrospray technology for enhanced oral bioavailability and improved antioxidation capability.

BACKGROUND: Astaxanthin (AST) is approved by the US Food and Drug Administration (FDA) as a safe dietary supplement for humans. As a potent lipid-soluble keto-carotenoid, it is widely used in food, cosmetics, and the pharmaceutical industry. However, its low solubility limits its powerful biological activity and its application in these fields. This study aims to develop a delivery system to address the low solubility and bioavailability of AST and to enhance its antioxidant capacity. RESULTS: Astaxanthin-loaded composite micelles were successfully prepared via coaxial electrospray technology. Astaxanthin existed in the amorphous state in the electro-sprayed formulation with an approximate particle size of 186.28 nm and with a polydispersity index of 0.243. In this delivery system, Soluplus and copovidone (PVPVA 64) were the main polymeric matrix for AST, which then released the drug upon contact with aqueous media, resulting in an overall increase in drug solubility and a release rate of 94.08%. Meanwhile, lecithin, and Polyethylene glycol-grafted Chitosan (PEG-g-CS) could support the absorption of AST in the gastrointestinal tract, assisting transmembrane transport. The relative bioavailability reached about 308.33% and the reactive oxygen species (ROS) scavenging efficiency of the formulation was 44.10%, which was 1.57 times higher than that of free astaxanthin (28.10%) when both were at the same concentration level based on astaxanthin. CONCLUSION: Coaxial electrospray could be applied to prepare a composite micelles system for the delivery of poorly water-soluble active ingredients in functional food, cosmetics, and medicine. © 2023 Society of Chemical Industry.

Enhanced oral bioavailability of capsaicin-loaded microencapsulation complex via electrospray technology: Preparation, in vitro and in vivo evaluation.

The purpose of this work was to fabricate the microencapsulation of capsaicin using electrospray technology and polyvinylpyrrolidone (PVP) K30 as a carrier. The morphological characteristics of capsaicin-PVP electrosprayed microencapsulation complex under different processing parameters were observed by scanning electron microscope (SEM), while the best process was determined, wherein it comprised of 10 KV (voltage), 0.8 ml·h-1 (solution flow rate), 0.9 mm (the inner diameter of the needle), and 10 cm (receiving distance). The X-ray diffraction results of the electrosprayed complex showed that capsaicin was present in the carrier in an amorphous form. The drug release properties of capsaicin powder and electrosprayed complex in different media were investigated. The results showed that in vitro release rates of the capsaicin complex in different media were much higher than that of capsaicin powder, with correspondingly improved bioavailability, defined by intravenous and oral dosing in rats in vivo, for the electrosprayed complex compared to that of capsacin powder. The dose absorbed of the electrosprayed complex was 2.2-fold that of the capsaicin powder. In short, electrospray technology can be used to prepare capsaicin-loaded electrosprayed microencapsulation complex. This technique can improve the solubility and bioavailability of capsaicin, and provide a new idea for the solubilization of other insoluble drugs.

In-vitro and in-vivo evaluation and anti-colitis activity of esculetin-loaded nanostructured lipid carrier decorated with DSPE-MPEG2000.

OBJECTIVE: Encapsulation of esculetin into DSPE-MPEG2000 carrier was performed to improve its water solubility and oral bioavailability, as well as enhance its anti-inflammatory effect on a mouse model of ulcerative colitis that was induced with dextran sulphate sodium (DSS). METHODS: We determined the in-vitro and in-vivo high-performance liquid chromatographic (HPLC) analysis method of esculetin; Esculetin-loaded nanostructure lipid carrier (Esc-NLC) was prepared using a thin-film dispersion method, wherein a particle size analyser was used to measure the particle size (PS) and zeta potential (ZP) of the Esc-NLC, while a transmission electron microscope (TEM) was employed to observe its morphology. Also, HPLC was used to measure its drug loading (DL), encapsulation efficiency (EE) and the in-vitro release of the preparation, as well as investigate the pharmacokinetic parameters. In addition, its anti-colitis effect was evaluated via histopathological examination of HE-stained sections and detection of the concentrations of tumour necrosis factor-alpha (TNF-α), interleukin (IL)-1 beta (ß), and IL-6 in serum with ELISA kits. RESULTS: The PS of Esc-NLC was 102.29 ± 0.63 nm with relative standard deviation (RSD) of 1.08% (with poly-dispersity index-PDI of 0.197 ± 0.023), while the ZP was -15.67 ± 1.39 mV with RSD of 1.24%. Solubility of esculetin was improved coupled with prolonged release time. Its pharmacokinetic parameters were compared with that of free esculetin, wherein the maximum concentration of the drug in plasma was increased by 5.5 times. Of note, bioavailability of the drug was increased by 1.7 times, while the half-life was prolonged by 2.4 times. In the anti-colitis efficacy experiment, the mice in Esc and Esc-NLC groups exhibited significantly reduced levels of TNF-α, IL-1ß, and IL-6 in their sera comparable to the DSS group. Colon histopathological examination revealed that mice with ulcerative colitis in both Esc and Esc-NLC groups displayed improved inflammation, amid the Esc-NLC groups having the best prophylactic treatment effect. CONCLUSION: Esc-NLC could ameliorate DSS-induced ulcerative colitis by improving bioavailability, prolonging drug release time and regulating cytokine release. This observation confirmed the potential of Esc-NLC to reduce inflammation in ulcerative colitis, albeit the need for follow-up research to verify the application of this strategy to clinical treatment of ulcerative colitis.

Preparation and evaluation of astaxanthin-loaded 2-hydroxypropyl-beta-cyclodextrin and Soluplus® nanoparticles based on electrospray technology.

BACKGROUND: Astaxanthin is a type of food-derived active ingredient with antioxidant, antidiabetic and non-toxicity functions, but its poor solubility and low bioavailability hinder further application in food industry. In the present study, through inclusion technologies, micellar solubilization and electrospray techniques, we prepared astaxanthin nanoparticles before optimizing the formulation to regulate the physical and chemical properties of micelles. We accomplished the preparation of astaxanthin nanoparticle delivery system based on single needle electrospray technology through use of 2-hydroxypropyl-ß-cyclodextrin and Soluplus® to improveme the release behavior of the nanocarrier. RESULTS: Through this experiment, we successfully prepared astaxanthin nanoparticles with a particle size of approximately 80 nm, which was further verified with scanning electron microscopy and transmission electron microscopy. Furthermore, the encapsulation of astaxanthin molecules into the carrier nanoparticles was verified via the results of attenuated total reflectance intensity and X-ray powder diffraction techniques. The in vitro release behavior of astaxanthin nanoparticles was different in media that contained 0.5% Tween 80 (pH 1.2, 4.5 and 6.8) buffer solution and distilled water. Also, we carried out a pharmacokinetic study of astaxanthin nanoparticles, in which it was observed that astaxanthin nanoparticle showed an effect of immediate release and significant improved bioavailability. CONCLUSION: 2-hydroxypropyl-ß-cyclodextrin and Soluplus® were used in the present study as a hydrophilic nanocarrier that could provide a simple way of encapsulating natural function food with repsect to improving the solubility and bioavailability of poorly water-soluble ingredients. © 2023 Society of Chemical Industry.

Microfluidic Generation of Near-Infrared Photothermal Vitexin/ICG Liposome with Amplified Photodynamic Therapy.

Glioma, in which a malignant tumor cell occurs in neural mesenchymal cells, has a rapid progression and poor prognosis, which is still far from desirable in clinical treatments. We developed a lab-on-a-chip (LOC) device for the rapid and efficient preparation of vitexin/indocyanine green (ICG) liposomes. Vitexin could be released from liposome to kill cancer cell, which can potentially improve the glioma therapeutic effect and reduce the treatment time through synergistic photodynamic/photothermal therapies (PDT/PTT). The vitexin/ICG liposome was fabricated via LOC and its physicochemical property and release in vitro were evaluated. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) method and live/dead staining were used to examine the enhanced antitumor effect of vitexin/ICG liposome in cooperation with PDT/PTT, while the related mechanism was explored by flow cytometry and western blot. The results were as follows: (1) The prepared vitexin/ICG liposome was smaller in size, homogenous in particle size distribution with significant low polydispersity index (PDI), and enhanced cumulative release in vitro. (2) We found that the formulated liposome presented strong cancer cell inhibition and suppression of its migration in a dose-dependent manner. (3) Further mechanistic studies showed that liposome combined with near-infrared irradiation could significantly upregulate levels of B cell lymphoma 2-associated X (Bax) protein and decrease B cell lymphoma 2 (Bcl-2) at protein levels. The vitexin/ICG liposomes prepared based on a simple LOC platform can effectively enhance the solubility of insoluble drugs, and the combined effect of PTT/PDT can effectively increase their antitumor effect, which provides a simple and valid method for the clinical translation of liposomes.

Preparation, in vitro and in vivo evaluation of pinocembrin-loaded TPGS modified liposomes with enhanced bioavailability and antihyperglycemic activity.

PURPOSE: To prepare polyethylene glycol succinate-vitamin E modified pinocembrin (PCB)-loaded liposomes (PCBT-liposomes) and evaluate PCBT-liposomal pharmacokinetics and antihyperglycemic activity. SIGNIFICANCE: The novel PCBT-liposomes demonstrated a promising application prospect as a nano drug carrier for future research. METHODS: Thin film dispersion was used to prepare PCBT-liposomes. We measured a series of characterization, followed by in vitro cumulative release, in vivo pharmacokinetic study, and antihyperglycemic activity evaluation. RESULTS: PCBT-liposomes displayed spherical and bilayered nanoparticles with mean particle size (roughly 92 nm), negative zeta potential (about -26.650 mV), high drug encapsulation efficiency (87.32 ± 1.34%) and good storage (at 4 or 25 °C) stability during 48 h after hydration. The cumulative release rate of PCBT-liposomes was markedly higher than free PCB in four different pH media. In vivo investigation showed that PCBT-liposomes could obviously improve oral bioavailability of PCB by 1.96 times, whereas the Cmax, MRT0-t, and T1/2 of PCBT-liposomes were roughly 1.700 ± 0.139 µg·mL-1, 12.695 ± 1.647 h, and 14.244 h, respectively. In terms of biochemical analysis, aspartate amino-transferase (AST), alanine amino-transferase (ALT), interleukin-1 (IL-1), and tumor necrosis factor-α (TNF-α) concentrations in serum of diabetic mice were respectively decreased 28.28%, 17.23%, 17.77%, and 8.08% after PCBT-liposomal treatment. CONCLUSION: These results show PCBT-liposomal preparation as an excellent nano-carrier which has the potential to improve water solubility, bioavailability, and antihyperglycemic activity of PCB, amid broadening the application of PCB in the clinical settings.

Pinocembrin polymeric micellar drug delivery system: preparation, characterisation and anti-hyperuricemic activity evaluation.

Aim: Hydrophobic pinocembrin (PCB) was incorporated into a new nano-drug delivery system to enhance solubility, bioavailability and anti-hyperuricemic activity of the drug.Methods: We fabricated PCB loaded polymeric micelles (PCB-FPM) by thin film dispersion method and appropriately determined their physical characteristics. The oral relative bioavailability and anti-hyperuricemic activity of PCB-FPM and free PCB were observed.Results: The optimum particle size of the micelles was 19.90 ± 0.93 nm. PCB-FPM exhibited great stability within 18 days, coupled with lower cytotoxicity and higher biocompatibility. Moreover, the percent cumulative release of PCB-FPM was much higher than free PCB in the dissolution media. The oral bioavailability of PCB-FPM was increased by 2.61 times compared with free PCB. Uric acid (UA) level of rats was reduced in PCB-FPM group (200 mg/kg) by 78.82% comparable to the model control.Conclusion: PCB-FPM may become an ideal strategy to increase oral in-vivo availability and anti-hyperuricemic activity of PCB.

Enhanced oral bioavailability and anti-hyperuricemic activity of liquiritin via a self-nanoemulsifying drug delivery system.

BACKGROUND: This study focused on the development of a self-nanoemulsifying drug delivery system (SNEDDS) to improve, potentially, the solubility and oral bioavailability of liquiritin (LQ). METHODS: The solubility of LQ in different types of excipient, namely oils (OLs), emulsifiers (EMs), and co-emulsifiers (CO-EMs), was evaluated, and a pseudo-ternary phase diagram (PTPD) and the formulation optimization were established. The prepared self-nanoemulsifying drug delivery system of liquiritin (LQ-SNEDDS) was assessed using droplet size (DS), zeta potential (ZP), polydispersity index (PDI), droplet morphology, drug release in vitro, and oral bioavailability. RESULTS: After the dilution of the LQ-SNEDDS, a transparent nanoemulsion was obtained with an acceptable DS (24.70 ± 0.73 nm), ZP (-18.69 ± 1.44 mV), and PDI (0.122 ± 0.006). The LQ-SNEDDS that was developed had a better release rate in vitro than the free LQ suspension. Pharmacokinetic evaluation showed that the relative oral bioavailability of LQ-SNEDDS was increased by 5.53 times, and LQ-SNEDDS exhibited a delayed half life and longer retention time in comparison with those of free LQ. Similarly, LQ-SNEDDS had a better urate lowering effect and provided better organ protection than free LQ at the same dose (P < 0.05). CONCLUSIONS: The incorporation of LQ into SNEDDS could serve as a promising approach to improve the solubility, oral bioavailability, and anti-hyperuricemic effect of LQ. © 2021 Society of Chemical Industry.

Hyperoside-loaded TPGs/mPEG-PDLLA self-assembled polymeric micelles: preparation, characterization and in vitro/in vivo evaluation.

Hyperoside (Hyp) self-assembled polymeric micelles (Hyp-PMs) were purposely developed to enhance aqueous solubility, in vivo availability and anti-oxidative effect of Hyp. In preparing Hyp-PMs, we employed the thin film dispersion method with the micelles consisting of TPGs and mPEG2000-PDLLA3000. The particle size, polydispersity index and zeta potential of Hyp-PMs were 67.42 ± 1.44 nm, 0.229 ± 0.015 and -18.67 ± 0.576 mV, respectively, coupled with high encapsulation efficiency （EE）of 90.63 ± 1.45% and drug loading (DL) of 6.97 ± 1.56%. Furthermore, the value of critical micelle concentration (CMC) was quite low, which indicated good stability and improved self-assembly ability of Hyp-PMs. Also, trend of in vitro Hyp release from Hyp-PMs demonstrated enhanced solubility of Hyp. Similarly, in comparison with free Hyp, oral bioavailability of Hyp-PMs was improved (about 8 folds) whilst half-life of Hyp-PMs was extended (about 3 folds). In vitro anti-oxidative effect showed obvious strong scavenging DPPH capability of Hyp-PMs, which may be attributed to its smaller size and better solubility. Altogether, Hyp-PMs may serve as a possible strategy to potentially enhance aqueous solubility, bioavailability and anti-oxidative effect of Hyp, which may play a key role in Hyp application in the pharmaceutical industries.

Design, Characterization, and Evaluation of Diosmetin-Loaded Solid Self-microemulsifying Drug Delivery System Prepared by Electrospray for Improved Bioavailability.

Diosmetin (DIOS) is a functional compound with poor water solubility, bad permeability, and crystal form. Self-microemulsifying drug delivery system (SMEDDS) was an effective formulation to overcome these shortcomings. In this study, liquid SMEDDS was prepared using Capmul® MCM C8 EP/NF, Cremophor EL, and PEG 400 (2:5.6:2.4, w/w/w) as excipients. Then, the novel technology of electrospray solidified liquid SMEDDS and prepared solid SMEDDS for inhibiting crystallization. Polyvinyl pyrrolidone (PVP) was used as carrier to construct DIOS-loaded solid SMEDDS, with polyethylene oxide (PEO) contributing to the formation of regular sphere in the process of spinning. The particle size of solid SMEDDS (194 ± 5 nm) was much bigger than of liquid SMEDDS (25 ± 1 nm), while DIOS-loaded solid SMEDDS showed greater dissolution rates in pH 1.2 and pH 6.8 media through in vitro drug release study. The solid nanoparticles were smooth and uniform from the graph of a scanning electron microscope (SEM). The graph of a transmission electron microscope (TEM) showed that small droplets were loaded in the matrix. Furthermore, DIOS was encapsulated by matrix in amorphous state via differential scanning calorimetry (DSC) and attenuated total reflection Fourier transform infrared (ATR-FTIR). The crystalline of DIOS was not formed in solid SMEDDS due to the characteristic peaks of DIOS disappeared in X-ray diffraction (XRD) pattern. Therefore, the oral bioavailability of DIOS improved significantly compared with liquid SMEDDS (4.27-fold). Hence, solid SMEDDS could improve the solubility and bioavailability of DIOS, through transfer of the state of crystalline to amorphous by electrospray technology.

Preparation of Pinocembrin-Loaded F127/MPEG-PDLLA Polymer Micelles and Anti-Osteoporotic Activity.

Pinocembrin (PCB) is 5,7-dihydroxyl flavanone and has multiple pharmacological activities, namely, anti-inflammation, anti-osteoporotic, and so on. However, low water solubility and bioavailability have hindered its application. Herein, we aimed to increase its bioavailability through preparation of F127/MPEG-PDLLA polymer micelles (PCB-M). We characterized the micelles through appropriate attributes such as analysis of particle size (PS), polydispersity (PDI), transmission electron microscopic (TEM) image, stability test, and evaluation of in vitro release of drug. After physical characterization, the respective PS, PDI, and entrapment efficiency (EE) of PCB-M were estimated to be 27.63 ± 0.17 nm, 0.055 ± 0.02, and 90.53 ± 0.01%. Fluorescence probe method was employed to measure critical micelle concentration (CMC) of PCB-M, we observed CMC was low, thereby suggesting that PCB-M had good stability. In vitro release analysis indicated that the rate of cumulative PCB release from PCB-M was greater than 90% in each medium compared with free PCB, which was less than 40%, thus pointing to a significantly improved solubility of PCB. In vivo pharmacokinetic results showed that oral biological availability of PCB-M increased 5.3 folds comparable to free PCB. The effects of PCB on osteoblasts and ALP activities were investigated; subsequently, zebrafish osteoporotic model was established with prednisolone to study the anti-osteoporotic effects of PCB and PCB-M. The results showed that PCB improved osteoporosis with PCB-M being more effective than free PCB. Finally, PCB-M can be used as a promising method to improve the solubility of PCB, while the bioavailability and anti-osteoporotic effect of PCB could be improved, thus laying a foundation for clinical use in the future.

Mixed micelles for enhanced oral bioavailability and hypolipidemic effect of liquiritin: preparation, in vitro and in vivo evaluation.

OBJECTIVES: Liquiritin, as one of the main flavonoids in Glycyrrhiza, exhibits extensive pharmacological effects, such as the anti-oxidant, anti-inflammatory, anti-tumor and so on. Herein, the aqueous solubility and oral bioavailability of liquiritin was purposely enhanced via the preparation of the mixed micelles. METHODS: The liquiritin-loaded micelles (LLM) were fabricated via thin-film dispersion method. The optimal LLM formulation was evaluated through physical properties including particle size (PS), encapsulation efficiency (EE) and drug loading (DL). In vitro accumulate release as well as in vivo pharmacokinetics were also evaluated. Moreover, the hypolipidemic activity of LLM was observed in the hyperlipidemia mice model. RESULTS: The LLM exhibited a homogenous spherical shape with small mean PS, good stability and high encapsulation efficiency. The accumulate release rates in vitro of the LLM were obviously higher than free liquiritin. The oral bioavailability of the formulation was heightened by 3.98 times in comparison with the free liquiritin. More importantly, LLM increased the hypolipidemic and effect of alleviating lipid metabolism disorder in hepatocytes of liquiritin in hyperlipidemia mice model. CONCLUSIONS: Collectively, the improved solubility of liquiritin in water coupled with its enhanced oral bioavailability and concomitant hypolipidemic activity could be attributed to the incorporation of the drug into the mixed micelles.

SMEDDS for improved oral bioavailability and anti-hyperuricemic activity of licochalcone A.

The aim of this study was to develop licochalcone A-loaded self-microemulsifying drug delivery system (LCA-SMEDDS) to improve bioavailability and anti-hyperuricemic activity of hydrophobic natural compound licochalcone A (LCA). The prepared LCA-SMEDDS was characterised by transmission electron microscopy analysis, particle size, polymer dispersity index (PDI), zeta potential, stability tests and in vitro release analysis. LCA-SMEDDS and free LCA were orally administered to Sprague-Dawley rats to investigate respective bioavailability. The hyperuricaemia rat model was established to evaluate anti-hyperuricemic activity. The particle size, PDI, and zeta potential of LCA-SMEDDS were 25.68 ± 0.79 nm, 0.074 ± 0.024, -14.37 ± 2.17 mV. The oral bioavailability of LCA-SMEDDS was increased 2.36-fold compared with the free LCA. The uric acid level of LCA-SMEDDS group (200 mg/kg) was decreased 60.08% compared with model control group. The developed LCA-SMEDDS could be an outstanding candidate for improving oral bioavailability and anti-hyperuricemic activity of LCA.

Improved Oral Bioavailability and Hypolipidemic Effect of Syringic Acid via a Self-microemulsifying Drug Delivery System.

This study aimed to develop a self-microemulsifying drug delivery system (SMEDDS) to enhance the solubility, oral bioavailability, and hypolipidemic effects of syringic acid (SA), a bioactive and poorly-soluble polyphenol. Based on the response surface methodology-central composite design (RSM-CCD), an optimum formulation of SA-SMEDDS, consisting of ethyl oleate (oil, 12.30%), Cremophor-EL (surfactant, 66.25%), 1,2-propanediol (cosurfactant, 21.44%), and drug loading (50 mg/g), was obtained. The droplets of SA-SMEDDS were nanosized (16.38 ± 0.12 nm), spherically shaped, and homogeneously distributed (PDI = 0.058 ± 0.013) nanoparticles with high encapsulation efficiency (98.04 ± 1.39%) and stability. In vitro release study demonstrated a prolonged and controlled release of SA from SMEDDS. In vitro cell studies signified that SA-SMEDDS droplets substantially promoted cellular internalization. In comparison with the SA suspension, SA-SMEDDS showed significant prolonged Tmax, t1/2, and MRT after oral administration. Also, SA-SMEDDS exhibited a delayed in vivo elimination, increased bioavailability (2.1-fold), and enhanced liver accumulation. Furthermore, SA-SMEDDS demonstrated significant improvement in alleviating serum lipid profiles and hepatic steatosis in high-fat diet-induced hyperlipidemia in mice. Collectively, SMEDDS demonstrated potential as a nanosystem for the oral delivery of SA with enhanced bioavailability and hypolipidemic effects.

Enhanced oral bioavailability of self-assembling curcumin-vitamin E prodrug-nanoparticles by co-nanoprecipitation with vitamin E TPGS.

Curcumin (CUR), a nontoxic natural compound with potent antitumor activity, was limited in clinical application due to its insolubility and exceedingly low bioavailability. In this study, a novel prodrug-nanoparticle (CSSV/TPGS-NPs) self-assembled by co-nanoprecipitation of CUR-s-s-vitamin E conjugate and d-alpha-tocopheryl polyethylene glycol 1000 succinate (vitamin E TPGS) was prepared in attempt to solve aforementioned obstacles. CSSV/TPGS-NPs showed smaller sizes and better stability compared with that of CUR-s-s-vitamin E conjugate prodrug-nanoparticles (CSSV-NPs). Significantly, the absorption constant and effective permeability of CSSV/TPGS-NPs in different intestinal tracts increased 1.31-2.78 times and 1.81-6.95 times than that of CUR suspension, respectively. Pharmacokinetic study in Sprague-Dawley (SD) rats demonstrated that orally administered CSSV/TPGS-NPs displayed a prolonged plasma circulation with 8.06-fold increase in relative bioavailability compared to that of the CUR suspension. Altogether, conjugation of hydrophobic native CUR with vitamin E to form CSSV/TPGS-NPs is a promising technology for sustained and controlled drug delivery of CUR with improved oral bioavailability in vivo.

Piperine fast disintegrating tablets comprising sustained-release matrix pellets with enhanced bioavailability: formulation, in vitro and in vivo evaluation.

Piperine (Pip) has been widely studied for its multiple activities such as antidepressant, anti-epileptic, and so forth. However, the poor water solubility coupled with low bioavailability may inevitably hinder the application of Pip in the clinical setting. In this study, a formulation strategy was proposed to spontaneously resolve the low bioavailability and dose dividing issue of Pip. The matrix pellets (Pip-SR-pellets) consisting of Pip solid dispersion (Pip-SD) and hydroxypropylmethyl cellulose-K100 were developed to achieve an increased and sustained release profile in vitro. The Pip-SR-pellets were compacted into fast disintegrating tablets (FDTs) with a blend of excipients comprising lactose, MCC, LS-HPC, and CMS-Na. The Pip-SD was characterized by solubility study and XRD. The evaluation of the cross-sectional morphology of the Pip-FDTs via scanning electron microscope proved that Pip-SR-pellets maintained its structural integrity during compression and were uniformly distributed in the Pip-FDTs. The release profile of Pip-SR-pellets was highly consistent with the Pip-FDTs. In vivo pharmacokinetics study demonstrated that the relative bioavailability of Pip-SR-pellets was approximately 2.70-fold higher than that of the pure drug, and 1.62-fold compared with that of Pip-SD. This work therefore showed a potential industrialized method could be applied to formulate poorly water-soluble drug that has dose-dividing requirement.

Preparation and in vitro/in vivo evaluation of 6-Gingerol TPGS/PEG-PCL polymeric micelles.

6-Gingerol, an active herbal ingredient of ginger has various bioactivities such as anti-neurodegenerative disease, anti-inflammatory and so on. The aim of the present study was to enhance the oral bioavailability and brain distribution of 6-Gingerol via polymeric micelles. A polymeric micelles drug delivery system of 6-Gingerol consisting of D-α-Tocopheryl polyethylene glycol 1000 succinate (TPGS) and Poly (ethylene glycol)-poly (ε-caprolactone) (PEG-PCL) was prepared via solvent injection method. The developed 6-Gingerol-loaded TPGS/PEG-PCL micelles (6-GTPMs) were characterized based on particle size, polydispersity index (PDI), zeta potential, encapsulation efficiency (EE), drug loading (DL) and in vitro release profile. The pharmacokinetics and tissue distribution studies were also evaluated. The nanoformulation produced a particle size of 73.24 ± 2.84 nm with acceptable PDI (0.129 ± 0.03), zeta potential (-2.74 ± 0.92 mV), DL (4.64%) and EE (79.68%). The in vitro release profile showed that the 6-GTPMs enhanced the solubility of 6-Gingerol, while the pharmaceutical analysis in rats indicated that 6-GTPMs significantly improved the oral bioavailability of 6-Gingerol (about 3 folds) in circulation. The 6-GTPMs exhibited remarkable brain targetability in the tissue distribution analysis. Collectively, a 6-Gingerol polymeric micelle with enhanced oral bioavailability coupled with excellent brain distribution was successfully developed.

Preparation and evaluation of isoliquiritigenin-loaded F127/P123 polymeric micelles.

Isoliquiritigenin (ISL) possesses a variety of pharmacological activities amid poor solubility in water which has restricted its clinical application. In this study, isoliquiritigenin-loaded F127/P123 polymeric micelles (ISL-FPM) were successfully prepared and evaluated in vitro and in vivo. The particle size, polydispersity index, and zeta potential of the selected formulation were 20.12 ± 0.72 nm, 0.183 ± 0.046, and -38.31 ± 0.33 mV, respectively, coupled with high encapsulation efficiency of 93.76 ± 0.31%. Drug-loading test showed the solubility of ISL after formulating into micelles was 232 times higher than its intrinsic solubility. Moreover, critical micelle concentration (CMC) was tested with fluorescence probe method and turned out to be quite low, which implied high stability of ISL-FPM. Release profile in HCl (pH 1.2), double distilled water, and PBS (pH 7.4) of ISL-FPM reached over 80%, while free ISL was around 40%. Pharmacokinetic research revealed that formulated ISL-FPM significantly increased bioavailability by nearly 2.23-fold compared to free ISL. According to the results of in vitro antioxidant activity, scavenging DPPH activity of ISL was significantly strengthened when it was loaded into polymeric micelles. Altogether, ISL-FPM can act as a promising approach to improve solubility as well as enhance bioavailability and antioxidant activity of ISL.