RESUMEN
Paramagnetic NMR techniques allow for studying three-dimensional structures of RNA-protein complexes. In particular, paramagnetic relaxation enhancement (PRE) data can provide valuable information about long-range distances between different structural components. For PRE NMR experiments, oligonucleotides are typically spin-labeled using nitroxide reagents. The current work describes an alternative approach involving a Cu(II) cyclen-based probe that can be covalently attached to an RNA strand in the vicinity of the protein's binding site using "click" chemistry. The approach has been applied to study binding of HIV-1 nucleocapsid protein 7 (NCp7) to a model RNA pentanucleotide, 5'-ACGCU-3'. Coordination of the paramagnetic metal to glutamic acid residue of NCp7 reduced flexibility of the probe, thus simplifying interpretation of the PRE data. NMR experiments showed attenuation of signal intensities from protein residues localized in proximity to the paramagnetic probe as the result of RNA-protein interactions. The extent of the attenuation was related to the probe's proximity allowing us to construct the protein's contact surface map.
Asunto(s)
Complejos de Coordinación/química , Cobre/química , Oligorribonucleótidos/metabolismo , Productos del Gen gag del Virus de la Inmunodeficiencia Humana/metabolismo , Espectroscopía de Resonancia Magnética con Carbono-13 , Química Clic , Complejos de Coordinación/síntesis química , Simulación de Dinámica Molecular , Oligorribonucleótidos/química , Unión Proteica , Espectroscopía de Protones por Resonancia Magnética , Productos del Gen gag del Virus de la Inmunodeficiencia Humana/químicaRESUMEN
RNA folding in cells typically occurs at mesophilic temperatures. However, in vitro, RNA can be unfolded either by increasing temperature to values that are much higher than physiological, or by mechanically pulling structures apart at ambient temperature. To directly study RNA folding at physiological temperatures and to unify thermodynamics measured by melting and pulling, we developed temperature-controlled optical tweezers (thermal tweezers) that can be used to mechanically unfold single RNA molecules at mesophilic temperatures. Folding of a 20-base-pair tetraloop hairpin was studied under different ionic conditions and at temperatures ranging from 22 °C to 42 °C. At each temperature, single hairpin molecules were held at constant force, and their two-state folding equilibria were monitored. The change in free energy derived from these measurements was used to construct a phase diagram of RNA structure using force and temperature as variables. Furthermore, we derived ΔG(0pN,T), the folding free energy at zero force and temperature T, by subtracting the stretching energy of unfolded RNA from the reversible mechanical work done to unfold the hairpin. ΔG(0pN,T) and its salt dependence agree reasonably well with the predictions by the nearest neighbor model. Under each ionic condition, ΔG(0pN,T) depended linearly on temperature, yielding ΔH(exp) and ΔS(exp) that also matched the predictions. The combination of force and temperature to study RNA folding is a step toward unifying thermodynamics measured by thermal melting and mechanical unfolding, and opens a new path for directly monitoring temperature induced RNA structural changes, as it occurs often in biology.
Asunto(s)
Pliegue del ARN , ARN/química , Temperatura , Pinzas ÓpticasRESUMEN
We present an efficient, effective, and economical approach, named E3technology, for proteomics sample preparation. By immobilizing silica microparticles into the polytetrafluoroethylene matrix, we develop a robust membrane medium, which could serve as a reliable platform to generate proteomics-friendly samples in a rapid and low-cost fashion. We benchmark its performance using different formats and demonstrate them with a variety of sample types of varied complexity, quantity, and volume. Our data suggest that E3technology provides proteome-wide identification and quantitation performance equivalent or superior to many existing methods. We further propose an enhanced single-vessel approach, named E4technology, which performs on-filter in-cell digestion with minimal sample loss and high sensitivity, enabling low-input and low-cell proteomics. Lastly, we utilized the above technologies to investigate RNA-binding proteins and profile the intact bacterial cell proteome.
Asunto(s)
Proteoma , Proteómica , Proteómica/métodos , Proteoma/análisis , Proteoma/metabolismo , Dióxido de Silicio/química , PolitetrafluoroetilenoRESUMEN
In minimal RNA kissing complexes formed between hairpins with cognate GACG tetraloops, the two tertiary GC pairs are likely stabilized by the stacking of 5'-unpaired adenines at each end of the short helix. To test this hypothesis, we mutated the flanking adenines to various nucleosides and examined their effects on the kissing interaction. Electrospray ionization mass spectrometry was used to detect kissing dimers in a multiequilibria mixture, whereas optical tweezers were applied to monitor the (un)folding trajectories of single RNA molecules. The experimental findings were rationalized by molecular dynamics simulations. Together, the results showed that the stacked adenines are indispensable for the tertiary interaction. By shielding the tertiary base pairs from solvent and reducing their fraying, the stacked adenines made terminal pairs act more like interior base pairs. The purine double-ring of adenine was essential for effective stacking, whereas additional functional groups modulated the stabilizing effects through varying hydrophobic and electrostatic forces. Furthermore, formation of the kissing complex was dominated by base pairing, whereas its dissociation was significantly influenced by the flanking bases. Together, these findings indicate that unpaired flanking nucleotides play essential roles in the formation of otherwise unstable two-base-pair RNA tertiary interactions.
Asunto(s)
Adenina , Emparejamiento Base , ARN/química , Secuencia de Bases , Cinética , Simulación de Dinámica Molecular , Nucleótidos/química , Pinzas Ópticas , ARN/genética , TermodinámicaRESUMEN
Proteomics experiments have typically high economic and technical barriers to broad biomedical scientists, which not only result in costly supplies and accessories for sample preparation but also the reluctance to adapt new techniques. In the present study, we present an effective and efficient, yet economical technology, which we call E3technology, for proteomics sample preparation. By immobilizing silica microparticles into a polytetrafluoroethylene (PTFE) matrix, we developed a novel medium, which could be used as a robust and reliable proteomics platform to generate LCMS-friendly samples in a rapid and low-cost fashion. Using different formats of E3technology, including E3tip, E3filter, E3cartridge, and E3plate, we explored a variety of sample types in varied complexity, quantity, volume, and size, including bacterial, fungi, mammalian cells, mouse tissue, and human body fluids. We benchmark their performance against several established approaches. Our data suggest that E3technology outperforms many of the currently available techniques in terms of proteome identification and quantitation. It is widely applicable, highly reproducible, readily scalable and automatable, and is user-friendly and stress-free to non-expert proteomics laboratories. It does not require specialized expertise and equipment, and significantly lowers the technical and economical barrier to proteomics experiments. An enhanced version, E4technology, also opens new avenues to sample preparation for low input and/or low-cell proteomics analysis. The presented technologies by our study represent a breakthrough innovation in biomedical science, and we anticipate widespread adoption by the proteomics community.
RESUMEN
Fluorescent intercalator displacement (FID) is a convenient and practical tool for identifying new nucleic acid-binding ligands. The success of FID is based on the fact that it can be fashioned into a versatile screening assay for assessing the relative binding affinities of compounds to nucleic acids. FID is a tagless approach; the target RNAs and the ligands or small molecules under investigation do not need to be modified in order to be examined. In this study, a modified FID assay for screening RNA-binding ligands was established using 3-methyl-2-((1-(3-(trimethylammonio)propyl)-4-quinolinylidene)methyl)benzothiazolium (TO-PRO) as the fluorescent indicator. Electrospray ionization mass spectrometry (ESI-MS) results provide direct evidence that correlates the reduction in fluorescence intensity observed in the FID assay with displacement of the dye molecule from RNA. The assay was successfully applied to screen a variety of RNA-binding ligands with a set of small hairpin RNAs. Ligands that bind with moderate affinity to the chosen RNA constructs (A-site, TAR [transactivation response element], h31 [helix 31], and H69 [helix 69] were identified.
Asunto(s)
Colorantes Fluorescentes/química , Sustancias Intercalantes/química , Ligandos , ARN/química , Espectrometría de Masa por Ionización de Electrospray/métodos , Benzotiazoles/química , Cloranfenicol/química , Duplicado del Terminal Largo de VIH , Paromomicina/química , ARN de Transferencia/química , Productos del Gen tat del Virus de la Inmunodeficiencia Humana/químicaRESUMEN
We have isolated and characterized a novel antibacterial peptide, CMB001, following an extensive screening effort of bacterial species isolated from diverse environmental sources. The bacterium that produces CMB001 is characterized as a Gram (+) bacillus sharing approximately 98.9% 16S rRNA sequence homology with its closest match, Paenibacillus kyungheensis. The molecule has been purified to homogeneity from its cell-free supernatant by a three-step preparative chromatography process. Based on its primary structure, CMB001 shares 81% identity with subtilin and 62% with nisin. CMB001 is active mainly against Gram-positive bacteria and Mycobacteriaceae but it is also active against certain Gram-negative bacteria, including multi-drug resistant Acinetobacter baumannii. It retains full antibacterial activity at neutral pH and displays a low propensity to select for resistance among targeted bacteria. Based on NMR and mass spectrometry, CMB001 forms a unique 3D-structure comprising of a compact backbone with one α-helix and two pseudo-α-helical regions. Screening the structure against the Protein Data Bank (PDB) revealed a partial match with nisin-lipid II (1WCO), but none of the lantibiotics with known structures showed significant structural similarity. Due to its unique structure, resistance profile, relatively broad spectrum and stability under physiological conditions, CMB001 is a promising drug candidate for evaluation in animal models of bacterial infection.
RESUMEN
Dialkyldiazirines have emerged as reagents of choice for biological photoaffinity labeling studies. The mechanism of crosslinking has dramatic consequences for biological applications where instantaneous labeling is desirable, as carbene insertions display different chemoselectivity and are much faster than competing mechanisms involving diazo or ylide intermediates. Here, deuterium labeling and diazo compound trapping experiments are employed to demonstrate that both carbene and diazo mechanisms operate in the reactions of a dialkyldiazirine motif that is commonly utilized for biological applications. For the fraction of intermolecular labeling that does involve a carbene mechanism, direct insertion is not necessarily involved, as products derived from a carbonyl ylide are also observed. We demonstrate that a strained cycloalkyne can intercept diazo compound intermediates and serve as a bioorthogonal probe for studying the contribution of the diazonium mechanism of photoaffinity labeling on a model protein under aqueous conditions.
Asunto(s)
Diazometano/química , Compuestos de Diazonio/química , Metano/análogos & derivados , Catálisis , Indicadores y Reactivos , Metano/química , Estructura MolecularRESUMEN
Paramagnetic resonance enhancement (PRE) is an NMR technique that allows studying three-dimensional structures of RNA-protein complexes in solution. RNA strands are typically spin labeled using nitroxide reagents, which provide minimal perturbation to the native structure. The current work describes an alternative approach, which is based on a Co2+-based probe that can be covalently attached to RNA in the vicinity of the protein's binding site using 'click' chemistry. Similar to nitroxide spin labels, the transition metal based probe is capable of attenuating NMR signal intensities from protein residues localized <40Å away. The extent of attenuation is related to the probe's distance, thus allowing for construction of the protein's contact surface map. This new paradigm has been applied to study binding of HIV-1 nucleocapsid protein 7, NCp7, to a model RNA pentanucleotide.
Asunto(s)
Cobalto/química , VIH-1/química , Sondas Moleculares/química , Resonancia Magnética Nuclear Biomolecular/métodos , ARN Viral/química , Productos del Gen gag del Virus de la Inmunodeficiencia Humana/química , Química Clic , Espectroscopía de Resonancia por Spin del ElectrónRESUMEN
Supported by high-throughput sequencing technologies, structure-specific nucleases are experiencing a renaissance as biochemical probes for genome-wide mapping of nucleic acid structure. This report explores the benefits and pitfalls of the application of Mung bean (Mb) and V1 nuclease, which attack specifically single- and double-stranded regions of nucleic acids, as possible structural probes to be employed in combination with MS detection. Both enzymes were found capable of operating in ammonium-based solutions that are preferred for high-resolution analysis by direct infusion electrospray ionization (ESI). Sequence analysis by tandem mass spectrometry (MS/MS) was performed to confirm mapping assignments and to resolve possible ambiguities arising from the concomitant formation of isobaric products with identical base composition and different sequences. The observed products grouped together into ladder-type series that facilitated their assignment to unique regions of the substrate, but revealed also a certain level of uncertainty in identifying the boundaries between paired and unpaired regions. Various experimental factors that are known to stabilize nucleic acid structure, such as higher ionic strength, presence of Mg(II), etc., increased the accuracy of cleavage information, but did not completely eliminate deviations from expected results. These observations suggest extreme caution in interpreting the results afforded by these types of reagents. Regardless of the analytical platform of choice, the results highlighted the need to repeat probing experiments under the most diverse possible conditions to recognize potential artifacts and to increase the level of confidence in the observed structural information.