RESUMEN
Augmented reality (AR) Head-Mounted Displays (HMDs) are emerging as the most efficient output medium to support manual tasks performed under direct vision. Despite that, technological and human-factor limitations still hinder their routine use for aiding high-precision manual tasks in the peripersonal space. To overcome such limitations, in this work, we show the results of a user study aimed to validate qualitatively and quantitatively a recently developed AR platform specifically conceived for guiding complex 3D trajectory tracing tasks. The AR platform comprises a new-concept AR video see-through (VST) HMD and a dedicated software framework for the effective deployment of the AR application. In the experiments, the subjects were asked to perform 3D trajectory tracing tasks on 3D-printed replica of planar structures or more elaborated bony anatomies. The accuracy of the trajectories traced by the subjects was evaluated by using templates designed ad hoc to match the surface of the phantoms. The quantitative results suggest that the AR platform could be used to guide high-precision tasks: on average more than 94% of the traced trajectories stayed within an error margin lower than 1 mm. The results confirm that the proposed AR platform will boost the profitable adoption of AR HMDs to guide high precision manual tasks in the peripersonal space.
Asunto(s)
Realidad Aumentada , Imagenología Tridimensional/métodos , Fantasmas de Imagen , Dispositivos Electrónicos Vestibles , Gráficos por Computador , Humanos , Cirugía Asistida por Computador/tendencias , Interfaz Usuario-Computador , Grabación en VideoRESUMEN
PURPOSE: We developed an innovative computer-assisted method to increase the accuracy of the surgery-first (SF) approach by linking the virtual orthodontic planning (VOP) with the virtual surgical planning (VSP). MATERIALS AND METHODS: Fifteen consecutive patients were enrolled from 2013 to 2015. All 15 patients had initially undergone cone-beam computed tomography (CBCT; 15 × 15 field-of-view) and intraoral digital scanning of the dental arches. The DICOM (Digital Imaging and Communications in Medicine) data set and STL files were processed using the SimPlant O&O platform (Dentsply-Sirona, York, PA), which facilitates skeletal, dental, and soft tissue modeling and subsequent realization of the VOP/VSP. The VSP was reproduced using computer-aided design and computer-aided manufacturing surgical splints, and the VOP was realized via postoperative orthodontic treatment. At the end of treatment, all the patients underwent repeat CBCT and digital scanning of the dental arches, and the new data sets were compared with the original data sets to determine the deviations. To evaluate skeletal accuracy, we assessed all points within an arbitrary range of -2 to +2 mm. To evaluate dental accuracy, the arbitrary range was -0.8 to +0.8 mm. RESULTS: The average duration of orthodontic treatment was 17.9 months. The accuracy of maxillary treatment averaged 0.0702 ± 2.0724 mm and that of mandibular treatment, 0.2811 ± 1.9993 mm. The average upper and lower dental arch accuracy was -0.0029 ± 1.125 and -0.0147 ± 1.263 mm, respectively. The maxillary surgery accuracy was 75.3% and that of mandibular surgery 74.0%, both within the -2 to +2-mm range. The upper and lower arch accuracy was 58.86 and 51.53%, respectively, both within the -0.8 to +0.8-mm range. CONCLUSIONS: The use of the VOP/VSP improved the diagnostic and therapeutic SF preoperative planning. VOP contributed significantly in this context. The accuracy of skeletal repositioning was acceptable; however, the VSP should be rendered more reproducibly in the future to minimize the need for orthodontic compensation and to maximize the advantages of SF.
Asunto(s)
Diseño Asistido por Computadora , Ortodoncia , Procedimientos Quirúrgicos Ortognáticos , Cirugía Asistida por Computador , Tomografía Computarizada de Haz Cónico , Arco Dental , Humanos , Imagenología Tridimensional , Planificación de Atención al Paciente , Estudios ProspectivosRESUMEN
OBJECTIVE: Enophthalmos is a severe complication of primary reconstruction of orbital floor fractures. The goal of secondary reconstruction procedures is to restore symmetrical globe positions to recover function and aesthetics. The authors propose a new method of orbital floor reconstruction using a mirroring technique and a customized titanium mesh, printed using a direct metal laser-sintering method. METHODS: This reconstructive protocol involves 4 steps: mirroring of the healthy orbit at the affected site, virtual design of a patient-specific orbital floor mesh, CAM procedures for direct laser-sintering of the customized titanium mesh, and surgical insertion of the device. Using a computed tomography data set, the normal, uninjured side of the craniofacial skeleton was reflected onto the contralateral injured side, and a reconstructive orbital floor mesh was designed virtually on the mirrored orbital bone surface. The solid-to-layer files of the mesh were then manufactured using direct metal laser sintering, which resolves the shaping and bending biases inherent in the indirect method. An intraoperative navigation system ensured accuracy of the entire procedure. RESULTS: Clinical outcomes were assessed using 3dMD photogrammetry and computed tomography data in 7 treated patients. CONCLUSION: The technique described here appears to be a viable method to correct complex orbital floor defects needing delayed reconstruction. This study represents the first step in the development of a wider experimental protocol for orbital floor reconstruction using computer-assisted design-computer-assisted manufacturing technology.
Asunto(s)
Diseño Asistido por Computadora , Enoftalmia/cirugía , Fracturas Orbitales/complicaciones , Procedimientos de Cirugía Plástica/métodos , Mallas Quirúrgicas , Titanio , Enoftalmia/diagnóstico , Enoftalmia/etiología , Femenino , Humanos , Imagenología Tridimensional , Masculino , Fracturas Orbitales/diagnóstico , Fracturas Orbitales/cirugía , Diseño de Prótesis , Tomografía Computarizada por Rayos X/métodos , Cigoma/diagnóstico por imagen , Cigoma/cirugíaRESUMEN
PURPOSE: The purpose of the present study was to develop a computer-aided design (CAD) and computer-aided manufacturing (CAM) technique that enabled fabrication of surgical cutting guides and titanium fixation plates that would allow the upper maxilla to be repositioned correctly without a surgical splint in orthognathic patients. MATERIALS AND METHODS: Ten patients were recruited. A complete CAD-CAM workflow for orthognathic surgery has 3 steps: 1) virtual planning of the surgical treatment, 2) CAD-CAM and 3-dimensional printing of customized surgical devices (surgical cutting guide and titanium fixation plates), and 3) computer-aided surgery. Upper maxilla repositioning was performed in a waferless manner using a CAD-CAM device: the surgical cutting guide was used during surgery to pilot the osteotomy line that had been planned preoperatively at the computer and the custom-made fixation titanium plates allowed desired repositioning of the maxilla. RESULTS: To evaluate the reproducibility of this CAD-CAM orthognathic surgical method, the virtually planned and actually achieved positions of the upper maxilla were compared. Overlap errors using a threshold value smaller than 2 mm were evaluated, and the frequency of such errors was used as a measurement of accuracy. By this definition, the accuracy was 100% in 7 patients (range in all patients, 62 to 100%; median, 92.7%). CONCLUSION: These results tend to confirm that the use of CAD-CAM cutting guides and customized titanium plates for upper maxilla repositioning represents a promising method for the accurate reproduction of preoperative virtual planning without the use of surgical splints.
Asunto(s)
Materiales Biocompatibles/química , Placas Óseas , Diseño Asistido por Computadora , Osteotomía Maxilar/instrumentación , Procedimientos Quirúrgicos Ortognáticos/instrumentación , Titanio/química , Aleaciones/química , Diseño de Equipo , Asimetría Facial/cirugía , Femenino , Humanos , Masculino , Maloclusión de Angle Clase III/cirugía , Maxilar/cirugía , Osteotomía Maxilar/métodos , Procedimientos Quirúrgicos Ortognáticos/métodos , Impresión Tridimensional , Reproducibilidad de los Resultados , Cirugía Asistida por Computador/instrumentación , Cirugía Asistida por Computador/métodos , Interfaz Usuario-ComputadorRESUMEN
PURPOSE: The purpose of the current study was to present the clinical applications of a new technique that we term computer-assisted piezoelectric surgery (CAPS). The method marries piezosurgery and navigation to greatly aid the treatment of various maxillofacial problems. METHODS: Preliminary applications in orthognathic surgery, craniofacial procedures, orthodontic surgery, and oncology were analyzed retrospectively. Eighteen patients were treated using the CAPS technique in the interval of 2010 to 2013. RESULTS: The technique emphasizing the features that are not possible without the combination of the 2 systems has been analyzed. The technique is safer than other methods, is minimally invasive, and allows the use of a buried or semiburied approach. CONCLUSIONS: According to our preliminary experience, CAPS seems to be a valuable new technique for craniomaxillofacial osteotomies.
Asunto(s)
Anomalías Craneofaciales/cirugía , Procedimientos Quirúrgicos Orales/métodos , Osteotomía/métodos , Piezocirugía/métodos , Cirugía Asistida por Computador/métodos , Humanos , Estudios RetrospectivosRESUMEN
This article aims to determine the absolute accuracy of maxillary repositioning during orthognathic surgery according to simulation-guided navigation, that is, the combination of navigation and three-dimensional (3D) virtual surgery. We retrospectively studied 15 patients treated for asymmetric dentofacial deformities at the Oral and Maxillofacial Surgery Unit of the S.Orsola-Malpighi University Hospital in Bologna, Italy, from January 2010 to January 2012. Patients were scanned with a cone-beam computed tomography before and after surgery. The virtual surgical simulation was realized with a dedicated software and loaded on a navigation system to improve intraoperative reproducibility of the preoperative planning. We analyzed the outcome following two protocols: (1) planning versus postoperative 3D surface analysis; (2) planning versus postoperative point-based analysis. For 3D surface comparison, the mean Hausdorff distance was measured, and median among cases was 0.99 mm. Median reproducibility < 1 mm was 61.88% and median reproducibility < 2 mm was 85.46%. For the point-based analysis, with sign, the median distance was 0.75 mm in the frontal axis, -0.05 mm in the caudal-cranial axis, -0.35 mm in the lateral axis. In absolute value, the median distance was 1.19 mm in the frontal axis, 0.59 mm in the caudal-cranial axis, and 1.02 mm in the lateral axis. We suggest that simulation-guided navigation makes accurate postoperative outcomes possible for maxillary repositioning in orthognathic surgery, if compared with the surgical computer-designed project realized with a dedicated software, particularly for the vertical dimension, which is the most challenging to manage.
Asunto(s)
Imagenología Tridimensional , Cirugía Ortognática/métodos , Adolescente , Adulto , Tomografía Computarizada de Haz Cónico , Femenino , Humanos , Masculino , Persona de Mediana Edad , Estudios Retrospectivos , Adulto JovenRESUMEN
Enophthalmos is a severe complication of primary reconstruction following orbital floor fractures, oncological resections, or maxillo-facial syndromes. The goal of secondary orbital reconstruction is to regain a symmetrical globe position to restore function and aesthetics. In this article, we present a method of computer-assisted orbital floor reconstruction using a mirroring technique and a custom-made titanium or high-density polyethylene mesh printed using computer-aided manufacturing techniques. This reconstructive protocol involves four steps: mirroring of the healthy orbit computer tomography files at the contralateral affected site, virtual design of a customized implant, computer-assisted manufacturing (CAM) of the implant using Direct Metal Laser Sintering (DMLS) or Computer Numerical Control (CNC) methods, and surgical insertion of the device. Clinical outcomes were assessed using 3dMD photogrammetry and computed tomography measures in 13 treated patients and compared to a control group treated with stock implants. An improvement of 3.04 mm (range 0.3-6 mm) in globe protrusion was obtained for the patients treated with patient-specific implants (PSI), and no major complications have been registered. The technique described here appears to be a viable method for correcting complex orbital floor defects needing delayed reconstruction.
RESUMEN
In this paper, we investigate the effectiveness of shape completion neural networks as clinical aids in maxillofacial surgery planning. We present a pipeline to apply shape completion networks to automatically reconstruct complete eumorphic 3D meshes starting from a partial input mesh, easily obtained from CT data routinely acquired for surgery planning. Most of the existing works introduced solutions to aid the design of implants for cranioplasty, i.e. all the defects are located in the neurocranium. In this work, we focus on reconstructing defects localized on both neurocranium and splanchnocranium. To this end, we introduce a new dataset, specifically designed for this task, derived from publicly available CT scans and subjected to a comprehensive pre-processing procedure. All the scans in the dataset have been manually cleaned and aligned to a common reference system. In addition, we devised a pre-processing stage to automatically extract point clouds from the scans and enrich them with virtual defects. We experimentally compare several state-of-the-art point cloud completion networks and identify the two most promising models. Finally, expert surgeons evaluated the best-performing network on a clinical case. Our results show how casting the creation of personalized implants as a problem of shape completion is a promising approach for automatizing this complex task.
Asunto(s)
Redes Neurales de la Computación , Tomografía Computarizada por Rayos X , Humanos , Imagenología Tridimensional/métodos , Cráneo/diagnóstico por imagen , Cráneo/cirugía , Medicina de Precisión/métodos , Cirugía Bucal/métodos , Cirugía Asistida por Computador/métodosRESUMEN
The aim of this study was to evaluate condylar and glenoid fossa remodeling after bimaxillary orthognathic surgery guided by patient-specific mandibular implants. In total, 18 patients suffering from dentofacial dysmorphism underwent a virtually planned bimaxillary mandibular PSI-guided orthognathic procedure. One month prior to surgery, patients underwent a CBCT scan and optical scans of the dental arches; these datasets were re-acquired 1 month and at least 9 months postsurgery. Three-dimensional models of the condyles, glenoid fossae, and interarticular surface space (IASS) were obtained and compared to evaluate the roto-translational positional discrepancy and surface variation of each condyle and glenoid fossa, and the IASS variation. The condylar position varied by an average of 4.31° and 2.18 mm, mainly due to surgically unavoidable ramus position correction. Condylar resorption remodeling was minimal (average ≤ 0.1 mm), and affected skeletal class III patients the most. Later condylar remodeling was positively correlated with patient age. No significant glenoid fossa remodeling was observed. No postoperative orofacial pain was recorded at clinical follow-up. The procedure was accurate in minimizing the shift in relationship between the bony components of the TMJ and their remodeling, and was effective in avoiding postoperative onset of orofacial pain. An increase in sample size, however, would be useful to confirm our findings.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Procedimientos Quirúrgicos Ortognáticos , Articulación Temporomandibular , Humanos , Femenino , Masculino , Adulto , Articulación Temporomandibular/diagnóstico por imagen , Articulación Temporomandibular/cirugía , Procedimientos Quirúrgicos Ortognáticos/métodos , Mandíbula/cirugía , Mandíbula/diagnóstico por imagen , Cóndilo Mandibular/diagnóstico por imagen , Cóndilo Mandibular/cirugía , Cóndilo Mandibular/patología , Adulto Joven , Remodelación Ósea/fisiología , Imagenología Tridimensional/métodos , Maxilar/cirugía , Maxilar/diagnóstico por imagen , Adolescente , Cavidad Glenoidea/diagnóstico por imagen , Cavidad Glenoidea/patología , Cavidad Glenoidea/cirugíaRESUMEN
Achieving and maintaining proper image registration accuracy is an open challenge of image-guided surgery. This work explores and assesses the efficacy of a registration sanity check method for augmented reality-guided navigation (AR-RSC), based on the visual inspection of virtual 3D models of landmarks. We analyze the AR-RSC sensitivity and specificity by recruiting 36 subjects to assess the registration accuracy of a set of 114 AR images generated from camera images acquired during an AR-guided orthognathic intervention. Translational or rotational errors of known magnitude up to ±1.5 mm/±15.5°, were artificially added to the image set in order to simulate different registration errors. This study analyses the performance of AR-RSC when varying (1) the virtual models selected for misalignment evaluation (e. g., the model of brackets, incisor teeth, and gingival margins in our experiment), (2) the type (translation/rotation) of registration error, and (3) the level of user experience in using AR technologies. Results show that: 1) the sensitivity and specificity of the AR-RSC depends on the virtual models (globally, a median true positive rate of up to 79.2% was reached with brackets, and a median true negative rate of up to 64.3% with incisor teeth), 2) there are error components that are more difficult to identify visually, 3) the level of user experience does not affect the method. In conclusion, the proposed AR-RSC, tested also in the operating room, could represent an efficient method to monitor and optimize the registration accuracy during the intervention, but special attention should be paid to the selection of the AR data chosen for the visual inspection of the registration accuracy.
Asunto(s)
Realidad Aumentada , Cirugía Asistida por Computador , Humanos , Cirugía Asistida por Computador/métodos , Quirófanos , Fantasmas de ImagenRESUMEN
Anatomical education is pivotal for medical students, and innovative technologies like augmented reality (AR) are transforming the field. This study aimed to enhance the interactive features of the AEducAR prototype, an AR tool developed by the University of Bologna, and explore its impact on human anatomy learning process in 130 second-year medical students at the International School of Medicine and Surgery of the University of Bologna. An interdisciplinary team of anatomists, maxillofacial surgeons, biomedical engineers, and educational scientists collaborated to ensure a comprehensive understanding of the study's objectives. Students used the updated version of AEducAR, named AEducAR 2.0, to study three anatomical topics, specifically the orbit zone, facial bones, and mimic muscles. AEducAR 2.0 offered two learning activities: one explorative and one interactive. Following each activity, students took a test to assess learning outcomes. Students also completed an anonymous questionnaire to provide background information and offer their perceptions of the activity. Additionally, 10 students participated in interviews for further insights. The results demonstrated that AEducAR 2.0 effectively facilitated learning and students' engagement. Students totalized high scores in both quizzes and declared to have appreciated the interactive features that were implemented. Moreover, interviews shed light on the interesting topic of blended learning. In particular, the present study suggests that incorporating AR into medical education alongside traditional methods might prove advantageous for students' academic and future professional endeavors. In this light, this study contributes to the growing research emphasizing the potential role of AR in shaping the future of medical education.
Asunto(s)
Anatomía , Realidad Aumentada , Educación de Pregrado en Medicina , Evaluación Educacional , Aprendizaje , Estudiantes de Medicina , Femenino , Humanos , Masculino , Adulto Joven , Anatomía/educación , Instrucción por Computador/métodos , Curriculum , Educación de Pregrado en Medicina/métodos , Evaluación Educacional/estadística & datos numéricos , Estudios Interdisciplinarios , Estudiantes de Medicina/psicología , Estudiantes de Medicina/estadística & datos numéricos , Encuestas y Cuestionarios/estadística & datos numéricosRESUMEN
Although the fibula free flap represents the gold standard for mandibular reconstructions, when implanted as a single barrel, this flap does not have the cross-sectional requisites to restore the native mandibular height, which is in turn required for the implant-supported dental rehabilitation of the patient. Our team has developed a design workflow that already considers the predicted dental rehabilitation, positioning the fibular free flap in the correct craniocaudal position to restore the native alveolar crest. The remaining height gap along the inferior mandibular margin is then filled by a patient-specific implant. The aim of this study is to evaluate the accuracy in transferring the planned mandibular anatomy resulting from said workflow on 10 patients by means of a new rigid body analysis method, derived from the evaluation of orthognathic surgery procedures. The analysis method has proved to be reliable and reproducible, and the results obtained show that the procedure already has satisfactory accuracy (4.6° mean total angular discrepancy, 2.7 mm total translational discrepancy, 1.04 mm mean neo-alveolar crest surface deviation), while also pointing out possible improvements to the virtual planning workflow.
RESUMEN
BACKGROUND: Augmented reality (AR) allows the overlapping and integration of virtual information with the real environment. The camera of the AR device reads the object and integrates the virtual data. It has been widely applied to medical and surgical sciences in recent years and has the potential to enhance intraoperative navigation. MATERIALS AND METHODS: In this study, the authors aim to assess the accuracy of AR guidance when using the commercial HoloLens 2 head-mounted display (HMD) in pediatric craniofacial surgery. The Authors selected fronto-orbital remodeling (FOR) as the procedure to test (specifically, frontal osteotomy and nasal osteotomy were considered). Six people (three surgeons and three engineers) were recruited to perform the osteotomies on a 3D printed stereolithographic model under the guidance of AR. By means of calibrated CAD/CAM cutting guides with different grooves, the authors measured the accuracy of the osteotomies that were performed. We tested accuracy levels of ±1.5 mm, ±1 mm, and ±0.5 mm. RESULTS: With the HoloLens 2, the majority of the individuals involved were able to successfully trace the trajectories of the frontal and nasal osteotomies with an accuracy level of ±1.5 mm. Additionally, 80% were able to achieve an accuracy level of ±1 mm when performing a nasal osteotomy, and 52% were able to achieve an accuracy level of ±1 mm when performing a frontal osteotomy, while 61% were able to achieve an accuracy level of ±0.5 mm when performing a nasal osteotomy, and 33% were able to achieve an accuracy level of ±0.5 mm when performing a frontal osteotomy. CONCLUSIONS: despite this being an in vitro study, the authors reported encouraging results for the prospective use of AR on actual patients.
RESUMEN
BACKGROUND: Orthognathic surgery is a multidisciplinary surgery in which the aesthetic results have become increasingly important, and consequently, also the predictability of the surgical outcomes. In this paper, we analyzed the volumetric distribution of the lower two-thirds of the face, in patients operated by orthognathic surgery and selected for their attractiveness. Our goal was to analyze the aesthetic volumetric distribution for gender and to propose our operating philosophy, that a normative distribution of facial volumes could be used like a new 3D aesthetic guide in orthognathic planning. METHODS: A group of 46 orthognathic patients (26 females, 20 males) with the best postoperative aesthetic score was selected by a jury of plastic surgeons, orthodontists, and journalists. The mean soft tissue volumes of the malar, maxillary, mandibular, and chin regions were analyzed. RESULTS: Overall, we measured a mean female facial volume distribution of 38.7%, 29%, 27.6%, and 4.7%, respectively, in the malar, maxillary, mandibular, and chin regions, while in males, it was 37%, 26%, 30%, and 6%, respectively. CONCLUSIONS: In this paper, the expansion of facial volumes in orthognathic surgery is proposed as a key point for facial harmonization. Beauty could be scientifically interpreted as a balanced distribution of facial volumes, and the virtual study of this distribution can become an important part of the preoperative analysis, such as a "volumetric" 3D cephalometry, where the surgeon could use average values of aesthetic volumetric distribution as preoperative surgical references.
RESUMEN
Three-dimensional virtual simulation of orthognathic surgery is now a well-established method in maxillo-facial surgery. The commercial software packages are still burdened by a consistent imprecision on soft tissue predictions. In this study, the authors produced an anatomically detailed patient specific numerical model for simulation of soft tissue changes in orthognathic surgery. Eight patients were prospectively enrolled. Each patient underwent CBCT and planar x-rays prior to surgery and in addition received an MRI scan. Postoperative soft-tissue change was simulated using Finite Element Modeling (FEM) relying on a patient-specific 3D models generated combining data from preoperative CBCT (hard tissue) scans and MRI scans (muscles and skin). An initial simulation was performed assuming that all the muscles and the other soft tissue had the same material properties (Homogeneous Model). This model was compared with the postoperative CBCT 3D simulation for validation purpose. Design of experiments (DoE) was used to assess the effect of the presence of the muscles considered and of their variation in stiffness. The effect of single muscles was evaluated in specific areas of the midface. The quantitative distance error between the homogeneous model and actual patient surfaces for the midface area was 0.55 mm, standard deviation 2.9 mm. In our experience, including muscles in the numerical simulation of orthognathic surgery, brought an improvement in the quality of the simulation obtained.
Asunto(s)
Cirugía Ortognática , Procedimientos Quirúrgicos Ortognáticos , Humanos , Procedimientos Quirúrgicos Ortognáticos/métodos , Imagenología Tridimensional/métodos , Huesos Faciales , Cara/anatomía & histología , Cefalometría/métodosRESUMEN
Oral cavity defects occur after resection of lesions limited to the mucosa, alveolar gum, or minimally affecting the bone. Aiming at esthetical and functional improvements of intraoral reconstruction, the possibility of harvesting a new galeo-pericranial free flap was explored. The objective of this study was to assess the technical feasibility of flap harvesting through anatomical dissections and surgical procedure simulations. Ten head and neck specimens were dissected to simulate the surgical technique and evaluate the vascular calibers of temporal and cervical vessels. The procedure was therefore reproduced on a revascularized and ventilated donor cadaver. Anatomical dissections demonstrated that the mean cervical vascular calibers are compatible with superficial temporal ones, proving to be adequate for anastomosis. Perforating branches of the superficial temporal vascularization nourishing the pericranium were identified in all specimens. In conclusion, blood flow presence was recorded after anastomosing superficial temporal and facial vessels in the revascularized donor cadaver, demonstrating both this procedure's technical feasibility and the potential revascularization of the flap and therefore encouraging its potential in vivo application.
RESUMEN
In the relevant global context, although virtual reality, augmented reality, and mixed reality have been emerging methodologies for several years, only now have technological and scientific advances made them suitable for revolutionizing clinical care and medical settings through the provision of advanced features and improved healthcare services. Over the past fifteen years, tools and applications using augmented reality (AR) have been designed and tested in the context of various surgical and medical disciplines, including maxillofacial surgery. The purpose of this paper is to show how a marker-less AR guidance system using the Microsoft® HoloLens 2 can be applied in mandible and maxillary demolition surgery to guide maxillary osteotomies. We describe three mandibular and maxillary oncologic resections performed during 2021 using AR support. In these three patients, we applied a marker-less tracking method based on recognition of the patient's facial profile. The surgeon, using HoloLens 2 smart glasses, could see the virtual surgical planning superimposed on the patient's anatomy. We showed that performing osteotomies under AR guidance is feasible and viable, as demonstrated by comparison with osteotomies performed using CAD-CAM cutting guides. This technology has advantages and disadvantages. However, further research is needed to improve the stability and robustness of the marker-less tracking method applied to patient face recognition.
RESUMEN
Gross anatomy knowledge is an essential element for medical students in their education, and nowadays, cadaver-based instruction represents the main instructional tool able to provide three-dimensional (3D) and topographical comprehensions. The aim of the study was to develop and test a prototype of an innovative tool for medical education in human anatomy based on the combination of augmented reality (AR) technology and a tangible 3D printed model that can be explored and manipulated by trainees, thus favoring a three-dimensional and topographical learning approach. After development of the tool, called AEducaAR (Anatomical Education with Augmented Reality), it was tested and evaluated by 62 second-year degree medical students attending the human anatomy course at the International School of Medicine and Surgery of the University of Bologna. Students were divided into two groups: AEducaAR-based learning ("AEducaAR group") was compared to standard learning using human anatomy atlas ("Control group"). Both groups performed an objective test and an anonymous questionnaire. In the objective test, the results showed no significant difference between the two learning methods; instead, in the questionnaire, students showed enthusiasm and interest for the new tool and highlighted its training potentiality in open-ended comments. Therefore, the presented AEducaAR tool, once implemented, may contribute to enhancing students' motivation for learning, increasing long-term memory retention and 3D comprehension of anatomical structures. Moreover, this new tool might help medical students to approach to innovative medical devices and technologies useful in their future careers.
Asunto(s)
Realidad Aumentada , Estudiantes de Medicina , Cadáver , Evaluación Educacional , Humanos , Impresión TridimensionalRESUMEN
OBJECTIVES: The aim of this study is to introduce a novel 3D cephalometric analysis (3DCA) and to validate its use in evaluating the reproducibility of virtual orthodontic-surgical planning (VOSP) in surgery-first approach (SF) comparing VOSP and post-operative outcome (PostOp). METHODS: The cohort of nineteen patients underwent bimaxillary orthognathic surgery following the VOSP designed in SimPlant O&O software by processing cone-beam computed tomography (CBCT) scans and intraoral digital scanning of the dental arches. Said records were re-acquired once the post-operative orthodontic treatment was completed. The 3DCA was performed by three expert operators on VOSP and PostOp 3D models. Descriptive statistics of 3DCA measures were evaluated, and outcomes were compared via Wilcoxon test. RESULTS: In the comparison between cephalometric outcomes against planned ones, the following values showed significant differences: Wits Index, which suggests a tendency towards skeletal class III in PostOp (p = 0.033); decreased PFH/AFH ratio (p = 0.010); decreased upper incisors inclination (p < 0.001); and increased OVJ (p = 0.001). However not significant (p = 0.053), a tendency towards maxillary retroposition was found in PostOp (A/McNamara VOSP: 5.05 ± 2.64 mm; PostOp: 4.1 ± 2.6 mm). On average, however, when McNamara's plane was considered as reference, a tendency to biprotrusion was found. Upper incisal protrusion was greater in PostOp as an orthodontic compensation for residual maxillary retrusion (VOSP: 5.68 ± 2.56 mm; PostOp: 6.53 ± 2.63 mm; p = 0.084). Finally, the frontal symmetry in relation to the median sagittal plane decreased in craniocaudal direction. LIMITATIONS: A potential limit of studies making use of closest point distance analysis is represented by the complexity that surgeons and orthodontists face in applying this three-dimensional evaluation of SF accuracy/predictability to everyday clinical practice and diagnosis. Also, heterogeneity and limited sample size may impact the results of the study comparison. CONCLUSIONS: The presented 3DCA offers a valid aid in performing VOSP and analysing orthognathic surgery outcomes, especially in SF. Thanks to the cephalometric analysis, we found that surgery-first approach outcome unpredictability is mainly tied to the sagittal positioning of the maxilla and that the transverse symmetry is progressively less predictable in a craniocaudal direction.
Asunto(s)
Procedimientos Quirúrgicos Ortognáticos , Diente , Humanos , Procedimientos Quirúrgicos Ortognáticos/métodos , Reproducibilidad de los Resultados , Maxilar/diagnóstico por imagen , Maxilar/cirugía , Tomografía Computarizada de Haz Cónico , Imagenología Tridimensional , Cefalometría/métodosRESUMEN
AIMS: Tissue defects, resulting from surgical resection of oral squamous cell carcinoma (OSCC), are reconstructed routinely with skin grafts. OSCC arising from the grafted skin has been described; however, it is still unclear whether primary and second tumours have a common clonal origin. The aim of this study was to evaluate the clonal relationship between the primary OSCC and secondary neoplastic changes appearing in the skin graft in three patients, by screening the mitochondrial DNA D-loop region (mtDNA). METHODS AND RESULTS: In all three cases, the neoplastic lesions arising in the skin graft showed a clonal relationship with the previous OSCC and, on the basis of the results obtained by mtDNA analysis, could be considered to be a recurrence of the primary OSCC rather than a second primary OSCC. CONCLUSIONS: Starting from a field of genetically altered cells in the oral mucosa, the spread of the clonal cell population to the cutaneous flap might be stimulated by cytokines produced by the grafted skin. More studies are needed to evaluate the molecular relationship between primary and second OSCC to identify patients at higher risk of developing a second tumour in the skin graft.