Functional dissection and assembly of a small, newly evolved, W chromosome-specific genomic region of the African clawed frog Xenopus laevis.

Genetic triggers for sex determination are frequently co-inherited with other linked genes that may also influence one or more sex-specific phenotypes. To better understand how sex-limited regions evolve and function, we studied a small W chromosome-specific region of the frog Xenopus laevis that contains only three genes (dm-w, scan-w, ccdc69-w) and that drives female differentiation. Using gene editing, we found that the sex-determining function of this region requires dm-w but that scan-w and ccdc69-w are not essential for viability, female development, or fertility. Analysis of mesonephros+gonad transcriptomes during sexual differentiation illustrates masculinization of the dm-w knockout transcriptome, and identifies mostly non-overlapping sets of differentially expressed genes in separate knockout lines for each of these three W-specific gene compared to wildtype sisters. Capture sequencing of almost all Xenopus species and PCR surveys indicate that the female-determining function of dm-w is present in only a subset of species that carry this gene. These findings map out a dynamic evolutionary history of a newly evolved W chromosome-specific genomic region, whose components have distinctive functions that frequently degraded during Xenopus diversification, and evidence the evolutionary consequences of recombination suppression.

Method to derive the infrared complex refractive indices n(λ) and k(λ) for organic solids from KBr pellet absorption measurements.

Obtaining the complex refractive index vectors n(ν~) and k(ν~) allows calculation of the (infrared) reflectance spectrum that is obtained from a solid in any of its many morphological forms. We report an adaptation to the KBr pellet technique using two gravimetric dilutions to derive quantitative n(ν~)/k(ν~) for dozens of powders with greater repeatability. The optical constants of bisphenol A and sucrose are compared to those derived by other methods, particularly for powdered materials. The variability of the k values for bisphenol A was examined by 10 individual measurements, showing an average coefficient of variation for k peak heights of 5.6%. Though no established standards exist, the pellet-derived k peak values of bisphenol A differ by 11% and 31% from their single-angle- and ellipsometry-derived values, respectively. These values provide an initial estimate of the precision and accuracy of complex refractive indices that can be derived using this method. Limitations and advantages of the method are discussed, the salient advantage being a more rapid method to derive n/k for those species that do not readily form crystals or specular pellets.

Endogenous Retroviruses Augment Amphibian (Xenopus laevis) Tadpole Antiviral Protection.

The global amphibian declines are compounded by infections with members of the Ranavirus genus such as Frog Virus 3 (FV3). Premetamorphic anuran amphibians are believed to be significantly more susceptible to FV3 while this pathogen targets the kidneys of both pre- and postmetamorphic animals. Paradoxically, FV3-challenged Xenopus laevis tadpoles exhibit lower kidney viral loads than adult frogs. Presently, we demonstrate that X. laevis tadpoles are intrinsically more resistant to FV3 kidney infections than cohort-matched metamorphic and postmetamorphic froglets and that this resistance appears to be epigenetically conferred by endogenous retroviruses (ERVs). Using a X. laevis kidney-derived cell line, we show that enhancing ERV gene expression activates cellular double-stranded RNA-sensing pathways, resulting in elevated mRNA levels of antiviral interferon (IFN) cytokines and thus greater anti-FV3 protection. Finally, our results indicate that large esterase-positive myeloid-lineage cells, rather than renal cells, are responsible for the elevated ERV/IFN axis seen in the tadpole kidneys. This conclusion is supported by our observation that CRISPR-Cas9 ablation of colony-stimulating factor-3 results in abolished homing of these myeloid cells to tadpole kidneys, concurrent with significantly abolished tadpole kidney expression of both ERVs and IFNs. We believe that the manuscript marks an important step forward in understanding the mechanisms controlling amphibian antiviral defenses and thus susceptibility and resistance to pathogens like FV3. IMPORTANCE Global amphibian biodiversity is being challenged by pathogens like the Frog Virus 3 (FV3) ranavirus, underlining the need to gain a greater understanding of amphibian antiviral defenses. While it was previously believed that anuran (frog/toad) amphibian tadpoles are more susceptible to FV3, we demonstrated that tadpoles are in fact more resistant to this virus than metamorphic and postmetamorphic froglets. We showed that this resistance is conferred by large myeloid cells within the tadpole kidneys (central FV3 target), which possess an elevated expression of endogenous retroviruses (ERVs). In turn, these ERVs activate cellular double-stranded RNA-sensing pathways, resulting in a greater expression of antiviral interferon cytokines, thereby offering the observed anti-FV3 protection.

Interlayer Cation Polarizability Affects Supercritical Carbon Dioxide Adsorption by Swelling Clays.

Several strategies for mitigating the build-up of atmospheric carbon dioxide (CO2) bring wet supercritical CO2 (scCO2) in contact with phyllosilicates such as illites and smectites. While some work has examined the role of the charge-balancing cation and smectite framework features on CO2/smectite interactions, to our knowledge no one has examined how the polarizability of the charge-balancing cation influences these behaviors. In this paper, the scCO2 adsorption properties of Pb2+, Rb+, and NH4+ saturated smectite clays at variable relative humidity are studied by integrating in situ high-pressure X-ray diffraction (XRD), infrared spectroscopic titrations, and magic angle spinning nuclear magnetic resonance (MAS NMR) methods. The results are combined with previously published data for Na+, Cs+, and Ca2+ saturated versions of the same smectites to isolate the roles of the charge-balancing cations and perform two independent tests of the role of charge-balancing cation polarizability in determining the interlayer fluid properties and smectite expansion. Independent correlations developed for (i) San Bernardino hectorite (SHCa-1) and (ii) Wyoming montmorillonite (SWy-2) both show that cation polarizability is important in predicting the interlayer composition (mol% CO2 in the interlayer fluid and CO2/cation ratio in interlayer) and the expansion behavior for smectites in contact with wet and dry scCO2. In particular, this study shows that the charge-balancing cation polarizability is the most important cation-associated parameter in determining the expansion of the trioctahedral smectite, hectorite, when in contact with dry scCO2. While both independent tests show that cation polarizability is an important factor in smectite-scCO2 systems, the correlations for hectorite are different from those determined for montmorillonite. The root of these differences is likely associated with the roles of the smectite framework on adsorption, warranting follow-up studies with a larger number of unique smectite frameworks. Overall, the results show that the polarizability of the charge-balancing cation should be considered when preparing smectite clays (or industrial processes involving smectites) to capture CO2 and in predicting the behavior of caprocks over time.

Burn Intensity Drives the Alteration of Phenolic Lignin to (Poly) Aromatic Hydrocarbons as Revealed by Pyrolysis Gas Chromatography-Mass Spectrometry (Py-GC/MS).

High-intensity wildfires alter the chemical composition of organic matter, which is expected to be distinctly different from low-intensity prescribed fires. Herein, we used pyrolysis gas chromatography/mass spectrometry (Py-GC/MS), in conjunction with solid-state 13C nuclear magnetic resonance (NMR) and Fourier transform infrared (FT-IR) spectroscopy, to assess chemical alterations from three wildfires and a long-term frequent prescribed fire site. Our results showed that black ash formed under moderate intensity burns contained less aromatic (ArH), polyaromatic hydrocarbon (PAH), and nitrogen-containing compounds (Ntg) but more lignin (LgC) and phenol compounds (PhC), compared to white ash formed under high intensity burns. Both 13C NMR and FT-IR confirmed a higher relative percentage of carboxyl carbon in white ash, indicating the potential for higher water solubility and more mobile carbon, relative to black ash. Compared to wildfires, ash from low-intensity prescribed fire contained less ArH, PAH, and Ntg and more LgC and PhC. Controlled laboratory burning trials indicated that organic matter alteration was sensitive to the burn temperature, but not related to the fuel type (pine vs fir) nor oxygen absence/presence at high burn temperatures. This study concludes that higher burn temperatures resulted in higher (poly)aromatic carbon/nitrogen and lower lignin/phenol compounds.

Influence of intermolecular interactions on the infrared complex indices of refraction for binary liquid mixtures.

This paper investigates the accuracy of deriving the composite optical constants of binary mixtures from only the complex indices of refraction of the neat materials. These optical constants enable the reflectance spectra of the binary mixtures to be modeled for multiple scenarios (e.g., different substrates, thicknesses, volume ratios), which is important for contact and standoff chemical detection. Using volume fractions, each mixture's complex index of refraction was approximated via three different mixing rules. To explore the impact of intermolecular interactions, these predictions are tested by experimental measurements for two representative sets of binary mixtures: (1) tributyl phosphate combined with n-dodecane, a non-polar medium, to represent mixtures which primarily interact via dispersion forces and (2) tributyl phosphate and 1-butanol to represent mixtures with polar functional groups that can also interact via dipole-dipole interactions, including hydrogen bonding. The residuals and the root-mean-square error between the experimental and calculated index values are computed and demonstrate that for miscible liquids in which the average geometry of the cross-interactions can be considered isotropic (e.g., dispersion), the refractive indices of the mixtures can be modeled using composite n and k values derived from volume fractions of the neat liquids. Conversely, in spectral regions where the geometry of the cross-interactions is more restricted and anisotropic (e.g., hydrogen bonding), the calculated n and k values vary from the measured values. The impact of these interactions on the reflectance spectra are then compared by modeling a thin film of the binary mixtures on an aluminum substrate using both the measured and the mathematically computed indices of refraction.

Recovery in Mind: A Recovery College's journey through the Covid-19 pandemic.

INTRODUCTION: The Covid-19 restrictions of 2020-2021 are known to have undermined the UK population's mental health. Working alongside staff, peer trainers and students at Recovery in Mind (RiM), a Recovery College (RC) in West Berkshire, England, this mixed-methods study is amongst the first to investigate how an RC has responded to the pandemic. METHODS: Working in co-production with RiM staff and peer-trainers, this study employed a mixed-methods design, gathering Warwick-Edinburgh Mental Wellbeing Scale (WEMWBS) well-being outcome measures by questionnaire and student experience, learning and co-production by interviews. FINDINGS: This research found that RiM continued to produce demonstrable improvements in student mental health. Students welcomed the way that RiM adapted to offering online and socially distanced provisions. Students valued the skills that RiM taught and the way that RiM courses reinforced prior learning; above this, however, they valued the mutual support and sense of community that participation provided. CONCLUSION: This study underlines the value of RCs maintaining 'hidden curriculums' of peer support and community involvement. This research emphasizes co-production as not only a tool for empowerment or service improvement but as a valuable skill for personal mental health recovery. Even when operating under the most unforeseen or challenging of conditions, RCs should always endeavour to prioritize and maintain co-production. PATIENT OR PUBLIC CONTRIBUTION: In accordance with the RC ethos, this was an entirely co-produced study, with academic researchers and RiM staff and peer trainers working democratically in partnership with one another to design and manage the study and to write up and disseminate findings. To ensure the independence and rigour of findings, data analysis was undertaken by external academic researchers.

The energetic basis for hydroxyapatite mineralization by amelogenin variants provides insights into the origin of amelogenesis imperfecta.

Small variations in the primary amino acid sequence of extracellular matrix proteins can have profound effects on the biomineralization of hard tissues. For example, a change in one amino acid within the amelogenin protein can lead to drastic changes in enamel phenotype, resulting in amelogenesis imperfecta, enamel that is defective and easily damaged. Despite the importance of these undesirable phenotypes, there is very little understanding of how single amino acid variation in amelogenins can lead to malformed enamel. Here, we aim to develop a thermodynamic understanding of how protein variants can affect steps of the biomineralization process. High-resolution, in situ atomic force microscopy (AFM) showed that altering one amino acid within the murine amelogenin sequence (natural variants T21 and P41T, and experimental variant P71T) resulted in an increase in the quantity of protein adsorbed onto hydroxyapatite (HAP) and the formation of multiple protein layers. Quantitative analysis of the equilibrium adsorbate amounts revealed that the protein variants had higher oligomer-oligomer binding energies. MMP20 enzyme degradation and HAP mineralization studies showed that the amino acid variants slowed the degradation of amelogenin by MMP20 and inhibited the growth and phase transformation of HAP. We propose that the protein variants cause malformed enamel because they bind excessively to HAP and disrupt the normal HAP growth and enzymatic degradation processes. The in situ methods applied to determine the energetics of molecular level processes are powerful tools toward understanding the mechanisms of biomineralization.

Advanced Low-Flammable Electrolytes for Stable Operation of High-Voltage Lithium-Ion Batteries.

Despite being an effective flame retardant, trimethyl phosphate (TMPa ) is generally considered as an unqualified solvent for fabricating electrolytes used in graphite (Gr)-based lithium-ion batteries as it readily leads to Gr exfoliation and cell failure. In this work, by adopting the unique solvation structure of localized high-concentration electrolyte (LHCE) to TMPa and tuning the composition of the solvation sheaths via electrolyte additives, excellent electrochemical performance can be achieved with TMPa -based electrolytes in Gr∥LiNi0.8 Mn0.1 Co0.1 O2 cells. After 500 charge/discharge cycles within the voltage range of 2.5-4.4 V, the batteries containing the TMPa -based LHCE with a proper additive can achieve a capacity retention of 85.4 %, being significantly higher than cells using a LiPF6 -organocarbonates baseline electrolyte (75.2 %). Meanwhile, due to the flame retarding effect of TMPa , TMPa -based LHCEs exhibit significantly reduced flammability compared with the conventional LiPF6 -organocarbonates electrolyte.

Controls of nature: Secondary, tertiary, and quaternary structure of the enamel protein amelogenin in solution and on hydroxyapatite.

Amelogenin, a protein critical to enamel formation, is presented as a model for understanding how the structure of biomineralization proteins orchestrate biomineral formation. Amelogenin is the predominant biomineralization protein in the early stages of enamel formation and contributes to the controlled formation of hydroxyapatite (HAP) enamel crystals. The resulting enamel mineral is one of the hardest tissues in the human body and one of the hardest biominerals in nature. Structural studies have been hindered by the lack of techniques to evaluate surface adsorbed proteins and by amelogenin's disposition to self-assemble. Recent advancements in solution and solid state nuclear magnetic resonance (NMR) spectroscopy, atomic force microscopy (AFM), and recombinant isotope labeling strategies are now enabling detailed structural studies. These recent studies, coupled with insights from techniques such as CD and IR spectroscopy and computational methodologies, are contributing to important advancements in our structural understanding of amelogenesis. In this review we focus on recent advances in solution and solid state NMR spectroscopy and in situ AFM that reveal new insights into the secondary, tertiary, and quaternary structure of amelogenin by itself and in contact with HAP. These studies have increased our understanding of the interface between amelogenin and HAP and how amelogenin controls enamel formation.

Genesis and Stability of Hydronium Ions in Zeolite Channels.

The catalytic sites of acidic zeolite are profoundly altered by the presence of water changing the nature of the Brønsted acid site. High-resolution solid-state NMR spectroscopy shows water interacting with zeolite Brønsted acid sites, converting them to hydrated hydronium ions over a wide range of temperature and thermodynamic activity of water. A signal at 9 ppm was observed at loadings of 2-9 water molecules per Brønsted acid site and is assigned to hydrated hydronium ions on the basis of the evolution of the signal with increasing water content, chemical shift calculations, and the direct comparison with HClO4 in water. The intensity of 1H-29Si cross-polarization signal first increased and then decreased with increasing water chemical potential. This indicates that hydrogen bonds between water molecules and the tetrahedrally coordinated aluminum in the zeolite lattice weaken with the formation of hydronium ion-water clusters and increase the mobility of protons. DFT-based ab initio molecular dynamics studies at multiple temperatures and water concentrations agree well with this interpretation. Above 140 °C, however, fast proton exchange between bridging hydroxyl groups and water occurs even in the presence of only one water molecule per acid site.

Solid-State NMR Identification of Intermolecular Interactions in Amelogenin Bound to Hydroxyapatite.

Biomineralization processes govern the formation of hierarchical hard tissues such as bone and teeth in living organisms, and mimicking these processes could lead to the design of new materials with specialized properties. However, such advances require structural characterization of the proteins guiding biomineral formation to understand and mimic their impact. In their "active" form, biomineralization proteins are bound to a solid surface, severely limiting our ability to use many conventional structure characterization techniques. Here, solid-state NMR spectroscopy was applied to study the intermolecular interactions of amelogenin, the most abundant protein present during the early stages of enamel formation, in self-assembled oligomers bound to hydroxyapatite. Intermolecular dipolar couplings were identified that support amelogenin dimer formation stabilized by residues toward the C-termini. These dipolar interactions were corroborated by molecular dynamics simulations. A ß-sheet structure was identified in multiple regions of the protein, which is otherwise intrinsically disordered in the absence of hydroxyapatite. To our knowledge, this is the first intermolecular protein-protein interaction reported for a biomineralization protein, representing an advancement in understanding enamel development and a new general strategy toward investigating biomineralization proteins.

Improving Stability of Zeolites in Aqueous Phase via Selective Removal of Structural Defects.

Missing silicon-oxygen bonds in zeolites are shown to be the cause for structural instability of zeolites in hot liquid water. Their selective removal drastically improved their structural stability as demonstrated using zeolite beta as example. The defects in the siloxy bonds were capped by reaction with trimethylchlorosilane, and Si-O-Si bonds were eventually formed. Hydrolysis of Si-O-Si bonds of the parent materials and dissolution of silica-oxygen tetrahedra in water causing a decrease in sorption capacity by reprecipitation of dissolved silica and pore blocking was largely mitigated by the treatment. The stability of the modified molecular sieves was monitored by (29)Si-MAS NMR, transmission electron micrographs, X-ray diffraction, and adsorption isotherms. The microporosity, sorption capacity, and long-range order of the stabilized material were fully retained even after prolonged exposure to hot liquid water.

Molecular structure and stability of dissolved lithium polysulfide species.

The ability to predict the solubility and stability of lithium polysulfide is vital in realizing longer lasting lithium-sulfur batteries. Herein we report combined experimental and computational analyses to understand the dissolution mechanism of lithium polysulfide species in an aprotic solvent medium. Multinuclear NMR, variable temperature ESR and sulfur K-edge XAS analyses reveal that the lithium exchange between polysulfide species and solvent molecules constitutes the first step in the dissolution process. Lithium exchange leads to de-lithiated polysulfide ions (Sn(2-)) which subsequently form highly reactive free radicals through dissociation reaction (Sn(2-) → 2Sn/2˙(-)). The energy required for the dissociation and possible dimer formation reactions of the polysulfide species is analyzed using density functional theory (DFT) based calculations. Based on these findings, we discuss approaches to optimize the electrolyte in order to control the polysulfide solubility.

Magic angle spinning NMR reveals sequence-dependent structural plasticity, dynamics, and the spacer peptide 1 conformation in HIV-1 capsid protein assemblies.

A key stage in HIV-1 maturation toward an infectious virion requires sequential proteolytic cleavage of the Gag polyprotein leading to the formation of a conical capsid core that encloses the viral RNA genome and a small complement of proteins. The final step of this process involves severing the SP1 peptide from the CA-SP1 maturation intermediate, which triggers the condensation of the CA protein into the capsid shell. The details of the overall mechanism, including the conformation of the SP1 peptide in CA-SP1, are still under intense debate. In this report, we examine tubular assemblies of CA and the CA-SP1 maturation intermediate using magic angle spinning (MAS) NMR spectroscopy. At magnetic fields of 19.9 T and above, outstanding quality 2D and 3D MAS NMR spectra were obtained for tubular CA and CA-SP1 assemblies, permitting resonance assignments for subsequent detailed structural characterization. Dipolar- and scalar-based correlation experiments unequivocally indicate that SP1 peptide is in a random coil conformation and mobile in the assembled CA-SP1. Analysis of two CA protein sequence variants reveals that, unexpectedly, the conformations of the SP1 tail, the functionally important CypA loop, and the loop preceding helix 8 are modulated by residue variations at distal sites. These findings provide support for the role of SP1 as a trigger of the disassembly of the immature CA capsid for its subsequent de novo reassembly into mature cores and establish the importance of sequence-dependent conformational plasticity in CA assembly.

A common intermediate for N2 formation in enzymes and zeolites: side-on Cu-nitrosyl complexes.

Side on! Combined FTIR and NMR studies revealed the presence of a side-on nitrosyl species in the zeolite Cu-SSZ-13. This intermediate is very similar to those found in nitrite reductase enzyme systems. The identification of this intermediate led to the proposal of a reaction mechanism that is fully consistent with the results of both kinetic and spectroscopic studies.

Utilizing the Newest Vital Sign (NVS) to Assess Health Literacy at a Regional Academic Medical Center's Family Medicine Clinic.

Researchers examined the correlation between the physician's subjective assessment of health literacy rates and actual health literacy rates among patients as determined by the Newest Vital Sign (NVS). A sample of n = 150 patients, 18 years of age or older, were verbally interviewed using NVS tool before seeing their physician. After the physician met with the patient, the physician was asked to measure that patient's level of health literacy on a Likert-type scale and a "yes/no" scale. Frequency and percentage statistics were performed in SPSS to describe the distributions of patient and physician responses. Between-subjects statistics were used. Analysis of the patient surveys revealed one in 4 patients has a high likelihood of low health literacy. Analysis revealed there were significant positive correlations between physician response to perception of a patient's low health literacy risk and NVS survey responses. Despite the risk of limited literacy, 97.3% of physicians perceived the patient to understand what the physician was saying. Physicians should use teach-back and other health literacy principles with each patient, regardless of perceived risk.

Enhancing CO2 Transport Across a PEEK-Ionene Membrane and Water-Lean Solvent Interface.

Efficient direct air capture (DAC) of CO2 will require strategies to deal with the relatively low concentration in the atmosphere. One such strategy is to employ the combination of a CO2 -selective membrane coupled with a CO2 capture solvent acting as a draw solution. Here, the interactions between a leading water-lean carbon-capture solvent, a polyether ether ketone (PEEK)-ionene membrane, CO2 , and combinations were probed using advanced NMR techniques coupled with advanced simulations. We identify the speciation and dynamics of the solvent, membrane, and CO2 , presenting spectroscopic evidence of CO2 diffusion through benzylic regions within the PEEK-ionene membrane, not spaces in the ionic lattice as expected. Our results demonstrate that water-lean capture solvents provide a thermodynamic and kinetic funnel to draw CO2 from the air through the membrane and into the bulk solvent, thus enhancing the performance of the membrane. The reaction between the carbon-capture solvent and CO2 produces carbamic acid, disrupting interactions between the imidazolium (Im+ ) cations and the bistriflimide anions within the PEEK-ionene membrane, thereby creating structural changes through which CO2 can diffuse more readily. Consequently, this restructuring results in CO2 diffusion at the interface that is faster than CO2 diffusion in the bulk carbon-capture solvent.

Improved deposition and deprotection of silane tethered 3,4 hydroxypyridinone (HOPO) ligands on functionalized nanoporous silica.

An improved synthesis of a 3,4 hydroxypyridinone (HOPO) functionalized mesoporous silica is described. Higher 3,4-HOPO monolayer ligand loadings have been achieved, resulting in better performance. Performance improvements were demonstrated with the capture of U(VI) from human blood, plasma and filtered river water.

Microsized Pore Structure Determination in EPDM Rubbers Using High-Pressure 129Xe NMR Techniques.

Microsized pore parameters, such as pore size and distance between pores in a series of model EPDM rubbers, were determined in situ under the pressure of 500 psi using 129Xe nuclear magnetic resonance (NMR) techniques: spin-lattice (T1) and spin-spin (T2) relaxation measurements, pulsed-field gradient (PFG) NMR, and two-dimensional exchange spectroscopy (2D EXSY). The T1/T2 (≫1) ratio for the xenon confined in the pores is larger than that for nonconfined free xenon. This suggests that almost the entire pore surface interacts with xenon atoms like a closed pore. While these pores still connect each other through very narrow diffusion/exchange channels, it is possible to observe the echo decay in PFG-NMR and cross-peaks in 2D EXSY. The results show that both diffusion (Dpore ≈ 2.1 × 10-10 m2/s) and exchange (exchange rate, τexch = a few tens of milliseconds) of xenon between a pore within the material and outer surface are prolonged. The exchange distances (l), which correspond to the xenon gas penetration depth, were estimated to be 70-100 µm based on the measured diffusion coefficients and exchange rate (1/τexch). NMR diffraction analysis reveals that pore size (a) and pore distance (b) are on the order of magnitude of micrometers and tens of micrometers, while the diffusion coefficients of xenon gas in the diffusion channels (Deff) are about 10-8 m2/s. Overall, this study suggests that the pores with a few micrometers connected through very narrow flowing channels with the length of several tens of micrometers are developed 70 to 100 µm below the rubber surface. Furthermore, the overall steady-state diffusion of xenon is slower, approximately 2 orders of magnitudes, than the diffusion in the channel between the pores. The pore and exchange distances correlated with the composition of rubbers showed that the properties of EPDM rubber as a high-pressure gas barrier could be improved by reducing the size of cracks and the depth of gas penetration by the addition of both carbon black and silica fillers.