Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Más filtros

Banco de datos
Tipo del documento
Asunto de la revista
País de afiliación
Intervalo de año de publicación
1.
Clin Ophthalmol ; 17: 2341-2347, 2023.
Artículo en Inglés | MEDLINE | ID: mdl-37600145

RESUMEN

Purpose: To evaluate efficiency of grooving, nuclear fragment removal, and changes in pressure control in the Oertli Faros using traditional peristaltic and Speed and Precision (SPEEP) features. The SPEEP mode uses novel peristaltic technology permitting independent control of flow and vacuum. Methods: A porcine lens model was used with an enclosed chamber simulating the anterior segment. Grooving efficiency is evaluated with flow rates of 10, 30, and 50 mL/min using whole lenses. Lens cubes were emulsified at 20, 40, 60, 80, and 100% power with both SPEEP and non-SPEEP modes. Surge was evaluated with pressure gauges placed on the irrigation tubing and aspiration tubing. Pressure readings were recorded per the following: fluid and vacuum were initiated for 15 seconds, vacuum tubing was occluded for 5 seconds, tubing patency was then re-introduced for 15 seconds. Differences between sensors were recorded. Results: No significant increase in efficiency was seen with increasing flow rate from 30 to 50 mL/min using SPEEP. No significant differences were shown in lens fragment removal in SPEEP and non-SPEEP modes at any power tested. Pressure difference measurements were not significantly different with SPEEP and non-SPEEP modes. Conclusion: We showed that lower flow rates show comparable efficiency of grooving when using the SPEEP mode. The SPEEP function did not show increased efficiency in nuclear fragment removal when compared to traditional mode. Surge control was also comparable with both SPEEP and non-SPEEP modes. We suggest that the SPEEP function included in the Oertli Faros may have some advantages.

2.
J Cataract Refract Surg ; 49(10): 1056-1060, 2023 Oct 01.
Artículo en Inglés | MEDLINE | ID: mdl-37057705

RESUMEN

PURPOSE: To determine whether there is a difference in efficiency during phacoemulsification when using the hybrid polymer tip compared with the metal balanced tip, as measured by cumulative dissipated energy (CDE) and total procedure time. SETTING: John A. Moran Eye Center, University of Utah, Salt Lake City, Utah. DESIGN: Experimental study. METHODS: Phacoemulsification was performed with the Centurion Vision System and Infiniti OZil handpiece, with a 30-degree bevel metal balanced tip and hybrid polymer tip. The vacuum was set at 500 mm Hg and the aspiration flow rate at 50 mL/min. Power was changed for torsional and longitudinal ultrasound (US) at 20%, 40%, 60%, 80%, and 100%. Hardened porcine lenses were cut into 200 two mm cubes, 10 for each specified tip/power setting. They were placed into an artificial anterior chamber filled with a balanced salt solution, and phacoemulsification was performed. A second observer randomly assigned the US type and power. The same observer timed trials with a stopwatch, and CDE was recorded. RESULTS: There were no significant differences in time or CDE for any power levels or US modes when comparing the 2 tips. CONCLUSIONS: No significant difference in efficiency was observed when comparing the metal balanced tip with the hybrid polymer tip. Given the known improved safety profile and the overall equivalent efficiency of the hybrid tip, it could improve the performance of beginning and advanced surgeons in the future. Future study is needed to evaluate other setting combinations and to evaluate the hybrid tip in clinical settings.

3.
J Cataract Refract Surg ; 48(11): 1325-1330, 2022 11 01.
Artículo en Inglés | MEDLINE | ID: mdl-36026701

RESUMEN

PURPOSE: To evaluate mechanical damage of simulated lenticular debris on corneal endothelial cells during phacoemulsification. SETTING: University setting, Salt Lake City, Utah. DESIGN: Experimental study. METHODS: 12 New Zealand rabbits underwent bilateral surgery. After incision, 10 1.0 mm beads were injected into the anterior chamber of test eyes to simulate lenticular debris. A balanced salt solution was injected into the contralateral eyes with the same injector. The Intrepid Balanced Tip of the Centurion Ozil handpiece was inserted into the anterior chamber, and 60% torsional ultrasound was applied for 20 seconds with 50 mL/min flow, 70 mm Hg intraocular pressure, and 600 mm Hg vacuum. Cumulative dissipated energy (CDE) was noted. After euthanasia and enucleation, the corneas were removed, stained with trypan blue/alizarin red, and photographed in a standardized manner (×400 photographs from 5 specific areas and 1 overview photograph from each corneal button). The ImageJ program was used to evaluate cell damage and loss in the photographs. RESULTS: CDE was 4.64 ± 0.19 for test eyes with beads and 4.66 ± 0.17 for control eyes without beads ( P = .58). The percentage of intact cells was statistically higher in the control group ( P = .0005), whereas the percentages of damaged and lost cells were statistically higher in the test group ( P = .0010 and .0005, respectively). This was observed in the analysis of the ×400 photographs and overview photographs. CONCLUSIONS: This study suggests that lenticular debris swirling around the anterior chamber may cause significant damage to the corneal endothelium, providing further insight on mechanisms of damage during phacoemulsification.


Asunto(s)
Cristalino , Facoemulsificación , Conejos , Animales , Células Endoteliales , Endotelio Corneal , Cámara Anterior
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA