Patterning of perovskite-polymer films by wrinkling instabilities.

Organic-inorganic perovskites are semiconductors used for applications in optoelectronics and photovoltaics. Micron and submicron perovskite patterns have been explored in semitransparent photovoltaic and lasing applications. In this work, we show that a polymeric medium can be used to create a patterned perovskite, by using a novel and inexpensive approach.

Spontaneous assembly of carbon-based chains in polymer matrixes through surface charge templates.

Stable chains of carbon-based nanoparticles were formed directly in polymer matrixes through an electrode-free approach. Spontaneous surface charges were generated pyroelectrically onto functionalized ferroelectric crystals, enabling the formation of electric field gradients that triggered the dipole-dipole interactions responsible for the alignment of the particles, while embedded in the polymer solution. The phenomenon is similar to the dielectrophoretic alignment of carbon nanotubes reported in the literature. However, here the electric fields are generated spontaneously by a simple heat treatment that, simultaneously, aligns the particles and provides the energy necessary for curing the host polymer. The result is a polymer sheet reinforced with well-aligned chains of carbon-based particles, avoiding the invasive implementation of appropriate electrodes and circuits. Because polymers with anisotropic features are of great interest for enhancing the thermal and/or the electrical conductivity, the electrode-free nature of this technique would improve the scaling down and the versatility of those interconnections that find applications in many fields, such as electronics, sensors, and biomedicine. Theoretical simulations of the interactions between the particles and the charge templates were implemented and appear in good agreement with the experimental results. The chain formation was characterized by controlling different parameters, including surface charge configuration, particle concentration, and polymer viscosity, thus demonstrating the reliability of the technique. Moreover, micro-Raman spectroscopy and scanning electron microscopy were used for a thorough inspection of the assembled chains.

Palladium complexes with simple iminopyridines as catalysts for polyketone synthesis.

Four iminopyridines (N-N') differing in the nature of the substituents on the iminic carbon and on the ortho positions of the aryl ring (H or CH3) on the iminic nitrogen were used for the synthesis of neutral and monocationic palladium(ii) complexes of general formulae [Pd(CH3)Cl(N-N')] and [Pd(CH3)(NCCH3)(N-N')][PF6]. The detailed NMR characterization in solution highlighted that: (i) for both series of complexes, the Pd-CH3 signal is progressively shifted to a lower frequency on increasing the number of methyl groups on the ligand skeleton; (ii) for the neutral derivatives, the chemical shift of the (15)N NMR signals, determined through {(1)H,(15)N}-HMBC spectra, is significantly affected by the coordination to palladium; (iii) the coordination induced shift (CIS) of the nitrogen atom trans to the CH3 ligand is smaller than the other. The structure in the solid state for the neutral derivatives with all the four ligands was solved, pointing out that: (iv) the Pd-C bond distance increases with the basicity of the nitrogen-donor ligand; (v) the Pd-N bond distance correlates well with the CIS value. The combining of the solution and solid state structural features allows stating that: (vi) the Pd-CH3 singlet is a good probe for the electron donor capability of the ligand; (vii) the CIS value might be used as a probe for the strength of the Pd-N bond. All monocationic complexes generated active catalysts for the CO/vinyl arene copolymerization, leading to prevailingly syndiotactic polyketones. The catalyst performances, both in terms of catalyst productivity and polymer molecular weight, correlate well with the precatalyst structural features.

Can expectancy influence hemispheric asymmetries?

We carried out three experiments with the aim of verifying a critical assumption of Kinsbourne's (Acta Psychol., 33 (1970), 193-201; Attention and Performance V, London: Academic press, (1975), pp. 81-96) 'dynamic' attentional hypothesis of hemispheric asymmetries, namely, that asymmetries arise only when subjects know in advance what type of stimulus and/or cognitive mode they are about to be engaged with. We used a paradigm modified from Posner (J. Exp. Psychol., 109 (1980), 160-174) to study the effects of non-spatial 'cognitive' cueing on hemispheric asymmetries using a lexical decision and a visuo-spatial discrimination task (acute vs. obtuse angles). While we did not find significant overall hemispheric asymmetries with the spatial material, we found a consistent advantage of the left hemisphere in the lexical decision task. In Experiment 2 where the cue was presented in central vision and only the stimuli were lateralised and in Experiment 3 where both cue and stimuli were lateralised to the same hemisphere, the left hemisphere advantage did not interact with the effect of cueing. In contrast, in Experiment 4, where only the cue was lateralised and the stimuli were centrally presented, the left hemisphere advantage in the lexical decision task emerged only following invalid cueing. While the results of Experiments 2 and 3 are not in keeping with Kinsbourne's hypothesis, the result of Experiment 4 shows that some pre-exposural mechanisms may indeed affect the emergence of hemispheric asymmetries. A differential susceptibility in 'disengaging' from the processing mode induced by an invalid cue might represent another interesting example of hemispheric difference.

Laminates of poly(2-hydroxyethyl methacrylate) and polybutadiene as potential burn covering.

The preparation and the physical characterization of poly(2-hydroxyethyl methacrylate) thermally grafted onto polybutadiene (PHEMA/PB) are reported. The presence of polybutadiene increases the tensile properties of the film and prevents water diffusion through it while it does not affect the oxygen permeability of the PHEMA. The potential use of this material as burn wound cover is suggested.

Effects of postcuring and water sorption on the mechanical properties of composite dental restorative materials.

Four commercial dental restorative composites with different filler contents, were tested for the effects of postcuring and water sorption on elastic modulus, compressive strength and ultimate strain. Large variations in mechanical properties were seen; water sorption plasticizes the matrix, causing loss of low molecular weight substances.

Polyamide microcapsules containing jojoba oil prepared by inter-facial polymerization.

Jojoba oil containing polyamide microcapsules having diameter of approximately 5 microm were prepared by inter-facial polycondensation by direct method (oil-in-water). Qualitative effects of both the formulation and the process parameters on microcapsules characteristics were investigated by SEM observations. Morphological analysis showed the dependence of the external membrane compactness on the chemical nature of the water-soluble polyamine and the oil-soluble acid polychloride: 1,6-hexamethylenediamine (HMDA) and terephthaloyl dichloride (TDC) were found to favour the production of smooth and dense surfaces. The use of ultrasonic irradiations during the dispersion step to get a further reduction of microcapsules size was also evaluated.

[Initial observations on the biocompatibility of a polymer used as a skin dressing]. / Prime osservazioni sulla biocompatibilita' di un polimero utilizzabile quale protesi cutanea.

In the development of a dressing for burn wound covers, a material is required which combines good oxygen permeability, high water content and good biocompatibility with reasonable mechanical properties. One of the most important functions of the cover is to protect the burned surfaces from drying out and to constitute the first defence against microbial invasion. In this study composite sheets crosslinked either in presence of glicerol or diacetin, obtained by reinforcing PHEMA with a tricot PET net have been implanted subacute in rabbits, to test their biocompatibility. The same composites crosslinked in presence of diacetin and grafted on a polybutadene film, have been used as a skin graft on rabbits.