Exploring the Balance between DNA Pressure and Capsid Stability in Herpesviruses and Phages.

UNLABELLED: We have recently shown in both herpesviruses and phages that packaged viral DNA creates a pressure of tens of atmospheres pushing against the interior capsid wall. For the first time, using differential scanning microcalorimetry, we directly measured the energy powering the release of pressurized DNA from the capsid. Furthermore, using a new calorimetric assay to accurately determine the temperature inducing DNA release, we found a direct influence of internal DNA pressure on the stability of the viral particle. We show that the balance of forces between the DNA pressure and capsid strength, required for DNA retention between rounds of infection, is conserved between evolutionarily diverse bacterial viruses (phages λ and P22), as well as a eukaryotic virus, human herpes simplex 1 (HSV-1). Our data also suggest that the portal vertex in these viruses is the weakest point in the overall capsid structure and presents the Achilles heel of the virus's stability. Comparison between these viral systems shows that viruses with higher DNA packing density (resulting in higher capsid pressure) have inherently stronger capsid structures, preventing spontaneous genome release prior to infection. This force balance is of key importance for viral survival and replication. Investigating the ways to disrupt this balance can lead to development of new mutation-resistant antivirals. IMPORTANCE: A virus can generally be described as a nucleic acid genome contained within a protective protein shell, called the capsid. For many double-stranded DNA viruses, confinement of the large DNA molecule within the small protein capsid results in an energetically stressed DNA state exerting tens of atmospheres of pressures on the inner capsid wall. We show that stability of viral particles (which directly relates to infectivity) is strongly influenced by the state of the packaged genome. Using scanning calorimetry on a bacterial virus (phage λ) as an experimental model system, we investigated the thermodynamics of genome release associated with destabilizing the viral particle. Furthermore, we compare the influence of tight genome confinement on the relative stability for diverse bacterial and eukaryotic viruses. These comparisons reveal an evolutionarily conserved force balance between the capsid stability and the density of the packaged genome.

Effects of bioaerosol exposure on respiratory health in compost workers: a 13-year follow-up study.

OBJECTIVES: To determine the risk of German compost workers developing chronic respiratory effects from long-term exposure to bioaerosols. METHODS: Respiratory health was determined in 74 currently exposed compost workers and 37 non-exposed controls after 13 years of follow-up. In addition, 42 former compost workers (drop-outs) who left their work during the follow-up period were also examined. Respiratory symptoms and working conditions were assessed using identical questionnaires as at baseline. In addition, lung function was measured using the same spirometer as in the initial study. Sera from both surveys were tested for specific IgE and IgG antibodies to moulds and the risk of work-related symptoms was evaluated using regression approaches for prospective studies with binary data. RESULTS: In the follow-up period, the number of participants reporting cough significantly increased in compost workers and drop-outs compared to the controls. Working as a compost worker for at least 5 years increased the relative risk for cough (RR 1.28; 95% CI 1.2 to 1.4) and for cough with phlegm (RR 1.32; 95% CI 1.2 to 1.5). Current and former compost workers had slightly lower predicted percentage of forced expiratory volume in 1 s and predicted percentage of forced vital capacity than controls, but decrease in lung function during follow-up was not different among the 3 groups. In addition, no significant changes could be detected in antibody concentrations. CONCLUSIONS: Our results suggest that chronic exposure to bioaerosols in composting plants is related to a significantly higher risk for cough with phlegm, indicating chronic bronchitis. However, compost workers showed no higher incidence of deterioration of pulmonary function over the study.

A practical guide to epidemiological practice and standards in the identification and validation of diagnostic markers using a bladder cancer example.

Technical advances to analyze biological markers have generated a plethora of promising new marker candidates for early detection of cancer. However, in subsequent analyses only few could be successfully validated as being predictive, clinically useful, or effective. This failure is partially due to rapid publication of results that were detected in early stages of biomarker research. Methodological considerations are a major concern when carrying out molecular epidemiological studies of diagnostic markers to avoid errors that increase the potential for bias. Although guidelines for conducting studies and reporting of results have been published to improve the quality of marker studies, their planning and execution still need to be improved. We will discuss different sources of bias in study design, handling of specimens, and statistical analysis to illustrate possible pitfalls associated with marker research, and present legal, ethical, and technical considerations associated with storage and handling of specimens. This article presents a guide to epidemiological standards in marker research using bladder cancer as an example. Because of the possibility to detect early cancer stages due to leakage of molecular markers from the target organ or exfoliation of tumor cells into the urine, bladder cancer is particularly useful to study diagnostic markers. To improve the overall quality of marker research, future developments should focus on networks of studies and tissue banks according to uniform legal, ethical, methodological, and technical standards. This article is part of a Special Issue entitled: Computational Proteomics in the Post-Identification Era. Guest Editors: Martin Eisenacher and Christian Stephan.

Biomarker research with prospective study designs for the early detection of cancer.

This article describes the principles of marker research with prospective studies along with examples for diagnostic tumor markers. A plethora of biomarkers have been claimed as useful for the early detection of cancer. However, disappointingly few biomarkers were approved for the detection of unrecognized disease, and even approved markers may lack a sound validation phase. Prospective studies aimed at the early detection of cancer are costly and long-lasting and therefore the bottleneck in marker research. They enroll a large number of clinically asymptomatic subjects and follow-up on incident cases. As invasive procedures cannot be applied to collect tissue samples from the target organ, biomarkers can only be determined in easily accessible body fluids. Marker levels increase during cancer development, with samples collected closer to the occurrence of symptoms or a clinical diagnosis being more informative than earlier samples. Only prospective designs allow the serial collection of pre-diagnostic samples. Their storage in a biobank upgrades cohort studies to serve for both, marker discovery and validation. Population-based cohort studies, which may collect a wealth of data, are commonly conducted with just one baseline investigation lacking serial samples. However, they can provide valuable information about factors that influence the marker level. Screening programs can be employed to archive serial samples but require significant efforts to collect samples and auxiliary data for marker research. Randomized controlled trials have the highest level of evidence in assessing a biomarker's benefit against usual care and present the most stringent design for the validation of promising markers as well as for the discovery of new markers. In summary, all kinds of prospective studies can benefit from a biobank as they can serve as a platform for biomarker research. This article is part of a Special Issue entitled: Biomarkers: A Proteomic Challenge.

Prevalence of work-related rhino-conjunctivitis and respiratory symptoms among domestic waste collectors.

Waste collectors may suffer from acute and chronic health effects caused by organic dust (bioaerosols). Pathophysiological symptoms may originate either from allergic or irritative pathomechanisms, but an explicit distinction of the etiology is often complicated although crucial for proper risk assessment and workplace prevention. In this cross-sectional study, a total of 69 male waste collectors from the Ruhr area in Germany underwent a customized testing protocol including a modified questionnaire, basic clinical examination, spirometry, and immunologic parameters. Subjects were classified according to their work tasks into loaders (n=27), floaters (n=29), and drivers (n=13). We found that a high percentage of the workers had complaints (eyes 29.0%, nose 39.1%, and cough 34.8%) which were strongly work-related. Multiple logistic regression analyses indicated that duration of employment in waste collection (per 10 years) was associated with an increased prevalence of cough (OR=1.64, 95% CI 0.81; 3.35) and chronic bronchitis (OR=2.18, 95% CI 0.80; 5.92). An association between rhinitis and cough (OR=2.62, 95% CI 0.94; 7.27) was found, which supports the association between the prevalence of upper and lower airway disease. Furthermore, when adjusting for smoking status, atopic subjects suffered more frequently from irritation of the lower airways as indicated by cough (OR=2.71, 95% CI 0.91; 8.08). In conclusion, the study demonstrates associations between the prevalence of upper and lower airway disease in waste collectors. Notably, an underlying allergic disease in waste collectors could be suspected more commonly than previously reported.

A persistent untranslated sequence within bacteriophage T4 DNA topoisomerase gene 60.

A 50-nucleotide untranslated region is shown to be present within the coding sequence of Escherichia coli bacteriophage T4 gene 60, which encodes one of the subunits for its type II DNA topoisomerase. This interruption is part of the transcribed messenger RNA and appears not to be removed before translation. Thus, the usual colinearity between messenger RNA and the encoded protein sequence apparently does not exist in this case. The interruption is bracketed by a direct repeat of five base pairs. A mechanism is proposed in which folding of the untranslated region brings together codons separated by the interruption so that the elongating ribosome may skip the 50 nucleotides during translation. The alternative possibility, that the protein is efficiently translated from a very minor and undetectable form of processed messenger RNA, seems unlikely, but has not been completely ruled out.

Methylation of L1RE1, RARB, and RASSF1 function as possible biomarkers for the differential diagnosis of lung cancer.

BACKGROUND: Lung cancer is the major cause of cancer-related deaths worldwide. Differential diagnosis can be difficult, especially when only small samples are available. Epigenetic changes are frequently tissue-specific events in carcinogenesis and hence may serve as diagnostic biomarkers. MATERIAL AND METHODS: 138 representative formalin-fixed, paraffin-embedded (FFPE) tissues (116 lung cancer cases and 22 benign controls) were used for targeted DNA methylation analysis via pyrosequencing of ten literature-derived methylation markers (APC, CDH1, CDKN2A, EFEMP1, FHIT, L1RE1, MGMT, PTEN, RARB, and RASSF1). Methylation levels were analyzed with the Classification and Regression Tree Algorithm (CART), Conditional Interference Trees (ctree) and ROC. Validation was performed with additional 27 lung cancer cases and 38 benign controls. TCGA data for 282 lung cancer cases was included in the analysis. RESULTS: CART and ctree analysis identified the combination of L1RE1 and RARB as well as L1RE1 and RASSF1 as independent methylation markers with high discriminative power between tumor and benign tissue (for each combination, 91% specificity and 100% sensitivity). L1RE1 methylation associated significantly with tumor type and grade (p<0.001) with highest methylation in the control group. The opposite was found for RARB (p<0.001). RASSF1 methylation increased with tumor type and grade (p<0.001) with strongest methylation in neuroendocrine tumors (NET). CONCLUSION: Hypomethylation of L1RE1 is frequent in tumors compared to benign controls and associates with higher grade, whereas increasing methylation of RARB is an independent marker for tumors and higher grade. RASSF1 hypermethylation was frequent in tumors and most prominent in NET making it an auxiliary marker for separation of NSCLC and NET. L1RE1 in combination with either RARB or RASSF1 could function as biomarkers for separating lung cancer and non-cancerous tissue and could be useful for samples of limited size such as biopsies.

Evolution of the linear DNA replicons of the Borrelia spirochetes.

Members of the spirochete genus Borrelia carry numerous linear DNA replicons with covalently closed hairpin telomeres. The genome of one member of this genus, B. burgdorferi B31, has now been completely characterized and contains a linear chromosome, twelve linear plasmids and nine circular extra-chromosomal elements. The phylogenetic position of the Borrelia spirochetes strongly suggests that a progenitor with circular replicons acquired the ability to replicate linear DNA molecules.

Where are the pseudogenes in bacterial genomes?

Most bacterial genomes have very few pseudogenes; notable exceptions include the genomes of the intracellular parasites Rickettsia prowazekii and Mycobacterium leprae. As DNA can be introduced into microbial genomes in many ways, the compact nature of these genomes suggests that the rate of DNA influx is balanced by the rate of DNA deletion. We propose that the influx of dangerous genetic elements such as transposons and bacteriophages selects for the maintenance of relatively high deletion rates in most bacteria; the sheltered lifestyle of intracellular parasites removes this threat, leading to reduced deletion rates and larger pseudogene loads.

The origins and ongoing evolution of viruses.

Genome analyses of double strand DNA tailed bacteriophages argue that they evolve by recombinational reassortment of genes and by the acquisition of novel genes as simple genetic elements termed morons. These processes suggest a model for early virus evolution, wherein viruses can be regarded less as having derived from cells and more as being partners in their mutual co-evolution.

Analysis in vivo of the bacteriophage P22 headful nuclease.

Bacteriophage P22 packages its double-stranded DNA chromosomes from concatemeric replicating DNA in a processive, sequential fashion. According to this model, during the initial packaging event in such a series the packaging apparatus recognizes a nucleotide sequence, called pac, on the DNA, and then condenses DNA within the coat protein shell unidirectionally (rightward) from that point. DNA ends are generated near the pac site before or during the condensation reaction. The right end of the mature chromosome is created by a cut made in the DNA by the "headful nuclease" after a complete chromosome is condensed within the phage head. Subsequent packaging events on that concatemeric DNA begin at the end generated by the headful cut of the previous event and proceed in the same direction as the previous event. We report here accurate measurements of the P22 chromosome length (43,400( +/- 750) base-pairs, where the uncertainty is the range in observed lengths), genome length (41,830( +/- 315) base-pairs, where the uncertainty represents the accuracy with which the length is known), the terminal redundancy (1600( +/- 750) base-pairs or 3.8( +/- 1.8)%, where the uncertainty is the observed range) and the imprecision in the headful measuring device ( +/- 750 base-pairs or +/- 1.7%). In addition, we present evidence for a weak nucleotide sequence specificity in the headful nuclease. These findings lend further support to, and extend our understanding of, the sequential series model of P22 DNA packaging.

Functional domains of bacteriophage P22 scaffolding protein.

Assembly of the bacteriophage P22 requires a 303 amino acid residue scaffolding protein. Two scaffolding protein deletion mutants, consisting of residues 141 to 303 and 141 to 292, have been described. We report here that the 141-303 fragment, but not the 141-292 fragment, promoted procapsid assembly in vitro, bound to preformed shells of coat protein, and bound to a coat protein affinity column. These findings suggest that the carboxyl-terminal half of the scaffolding protein is sufficient for promoting assembly, and that the 11 amino acid residues at the extreme carboxyl terminus are required for binding to the coat protein. Analysis of the products of in vitro assembly reactions suggests that the maximum amount of scaffolding protein that can pack into a procapsid is dictated by the internal volume of the procapsid rather than by a finite number of binding sites. However, when the amount of scaffolding protein was reduced to limiting values, both the wild-type protein and the 141-303 fragment assembled procapsids with the same number, rather than the same mass, of scaffolding protein molecules. When the 141-292 fragment was added to a mixture of coat and scaffolding proteins, the initial phase of procapsid assembly was inhibited, but the final yield and composition of the procapsids were not affected. Assembly by a covalent dimeric mutant scaffolding protein (R74C/L177I) was not inhibited by the 141-292 fragment, which suggests that the inhibition is due to the formation of inactive heterodimers between the 141-292 fragment and the monomeric scaffolding protein. The 141-303 fragment, which has less tendency to self-associate than the wild-type protein, formed aberrant species as well as normal procapsid-like particles when the rate of assembly was high, suggesting that scaffolding protein dimerization may play a role in ensuring fidelity of assembly. Alternatively, residues 1 to 140 may play a direct structural role in preventing inappropriate scaffolding/coat protein interactions.

A programmed translational frameshift is required for the synthesis of a bacteriophage lambda tail assembly protein.

Two proteins, one of 31 kDa and one of 16 kDa, are encoded by a segment of the phage lambda tail gene region that contains two overlapping reading frames, neither of which is long enough to encode the larger protein. We show that the abundant 16-kDa protein (gpG) is encoded by the upstream open reading frame, gene G. The 31-kDa protein, gpG-T, is encoded jointly by gene G and the overlapping downstream T open reading frame. gpG-T is synthesized as the result of a translational frameshift that occurs when a ribosome translating the G gene slips back by one nucleotide at a position six codons from the C terminus of the gene and thereby bypasses the G termination codon to continue on in the T open reading frame. The resulting protein shares 135 residues of N-terminal amino acid sequence with gpG, followed by 144 amino acid residues of unique sequence. The frameshift event occurs with a frequency of approximately 4% at the sequence G GGA AAG, which encodes the dipeptide -Gly-Lys- in both the zero and -1 reading frames. The frameshift frequencies of point mutants in this "slippery sequence" argue that codon-anticodon interactions with both the glycyl and the lysyl-tRNA are important for frameshifting to occur. We find no clear evidence for a pausing mechanism to enhance frameshifting, as is seen in other well-characterized frameshifts. No simple secondary structure has been predicted for the region downstream from the slippery sequence, but this downstream sequence does contribute to the frameshifting rate. Our results together with those of Katsura and Kühl show that the frameshift product, gpG-T, has an essential role in lambda tail assembly, acting prior to tail shaft assembly. The role of gpG in tail assembly is not known. We find that both gpG and the gpG-T are absent from mature virions.

Initiation of bacteriophage P22 DNA packaging series. Analysis of a mutant that alters the DNA target specificity of the packaging apparatus.

Bacteriophage P22 is thought to package its double-stranded DNA chromosome from concatemeric replicating DNA in a "processive" sequential fashion. According to this model, during the initial packaging event in such a series the packaging apparatus recognizes a nucleotide sequence, called pac, on the DNA, and then condenses DNA within the coat protein shell unidirectionally from that point. DNA ends are generated near the pac site before or during the condensation reaction. The opposite end of the mature chromosome is created by a cut made in the DNA after a complete chromosome is condensed within the phage head. Subsequent packaging events on that concatemeric DNA begin at the end generated by the headful cut of the previous event and proceed in the same direction as the previous event. We report here the identification of a consensus nucleotide sequence for the pac site, and present evidence that supports the idea that the gene 3 protein is a central participant in this recognition event. In addition, we tentatively locate the portion of the gene 3 protein that contacts the pac site during the initiation of packaging.

Bacteriophage P22 portal protein is part of the gauge that regulates packing density of intravirion DNA.

The complex double-stranded DNA bacteriophages assemble DNA-free protein shells (procapsids) that subsequently package DNA. In the case of several double-stranded DNA bacteriophages, including P22, packaging is associated with cutting of DNA from the concatemeric molecule that results from replication. The mature intravirion P22 DNA has both non-unique (circularly permuted) ends and a length that is determined by the procapsid. In all known cases, procapsids consist of an outer coat protein, an interior scaffolding protein that assists in the assembly of the coat protein shell, and a ring of 12 identical portal protein subunits through which the DNA is presumed to enter the procapsid. To investigate the role of the portal protein in cutting permuted DNA from concatemers, we have characterized P22 portal protein mutants. The effects of several single amino acid changes in the P22 portal protein on the length of the DNA packaged, the density to which DNA is condensed within the virion, and the outer radius of the capsid have been determined. The results obtained with one mutant (NT5/1a) indicate no change (+/- 0.5%) in the radius of the capsid, but mature DNA that is 4.7% longer and a packing density that is commensurately higher than those of wild-type P22. Thus, the portal protein is part of the gauge that regulates the length and packaging density of DNA in bacteriophage P22. We argue that these findings make models for DNA packaging less likely in which the packing density is a property solely of the coat protein shell or of the DNA itself.

Molecular genetic analysis of bacteriophage P22 gene 3 product, a protein involved in the initiation of headful DNA packaging.

Bacteriophage P22 DNA packaging events occur in processive series on concatemeric phage DNA molecules. At the point where such series initiate, the DNA is recognized at a site called pac, and most molecular left ends are generated within six short regions called end sites, which are present in a 120 base-pair region surrounding the pac site. The bacteriophage P22 genes 2 and 3 proteins are required for successful generation of these ends and DNA packaging during progeny virion assembly. Mutants lacking the 162-amino-acid gene 3 protein replicate DNA and assemble functional procapsids. In this report we describe the nucleotide changes and DNA packaging phenotypes of a number of missense mutations of gene 3, which give the phage a higher than normal frequency of generalized transduction. In cells infected by these mutants, more packaging events initiate on the host chromosome than in wild-type infections, so the mutations are thought to affect the specificity of packaging initiation. In addition to having this phenotype, these mutations affect the process of phage DNA packaging in detectable ways. They may: (1) alter the target site specificity for packaging; (2) make target site recognition more promiscuous; (3) affect end site utilization; (4) alter the pac site; and (5) cause apparent random DNA packaging series initiation on phage DNA.

Genomic sequence and analysis of the atypical temperate bacteriophage N15.

N15 is a temperate bacteriophage that forms stable lysogens in Escherichia coli. While its virion is morphologically very similar to phage lambda and its close relatives, it is unusual in that the prophage form replicates autonomously as a linear DNA molecule with closed hairpin telomeres. Here, we describe the genomic architecture of N15, and its global pattern of gene expression, which reveal that N15 contains several plasmid-derived genes that are expressed in N15 lysogens. The tel site, at which processing occurs to form the prophage ends is close to the center of the genome in a similar location to that occupied by the attachment site, attP, in lambda and its relatives and defines the boundary between the left and right arms. The left arm contains a long cluster of structural genes that are closely related to those of the lambda-like phages, but also includes homologs of umuD', which encodes a DNA polymerase accessory protein, and the plasmid partition genes, sopA and sopB. The right arm likewise contains a mixture of apparently phage- and plasmid-derived genes including genes encoding plasmid replication functions, a phage repressor, a transcription antitermination system, as well as phage host cell lysis genes and two putative DNA methylases. The unique structure of the N15 genome suggests that the large global population of bacteriophages may exhibit a much greater diversity of genomic architectures than was previously recognized.

Structure of the coat protein-binding domain of the scaffolding protein from a double-stranded DNA virus.

Scaffolding proteins are required for high fidelity assembly of most high T number dsDNA viruses such as the large bacteriophages, and the herpesvirus family. They function by transiently binding and positioning the coat protein subunits during capsid assembly. In both bacteriophage P22 and the herpesviruses the extreme scaffold C terminus is highly charged, is predicted to be an amphipathic alpha-helix, and is sufficient to bind the coat protein, suggesting a common mode of action. NMR studies show that the coat protein-binding domain of P22 scaffolding protein exhibits a helix-loop-helix motif stabilized by a hydrophobic core. One face of the motif is characterized by a high density of positive charges that could interact with the coat protein through electrostatic interactions. Results from previous studies with a truncation fragment and the observed salt sensitivity of the assembly process are explained by the NMR structure.

A helical coat protein recognition domain of the bacteriophage P22 scaffolding protein.

The scaffolding protein of bacteriophage P22 directs the assembly of an icosahedral procapsid, a metastable shell that is the precursor for DNA packaging. The full-length protein has been shown previously to exist in a monomer-dimer-tetramer equilibrium of elongated and predominantly alpha-helical molecules. Two deletion-mutant fragments of the scaffolding protein, comprising amino acid residues 141 to 303 and 141 to 292, respectively, have been constructed, overexpressed in Escherichia coli, and purified. Removal of residues 1 to 140 yields a protein that is assembly-active both in vitro and in vivo, while the removal of the C-terminal 11 residues (293 to 303) leads to complete loss of scaffolding activity. Sedimentation analysis reveals that both scaffolding fragments exist in a monomer-dimer equilibrium governed by apparent dissociation constants Kd(141-303)=640 microM and Kd(141-292)=880 microM. Tetramer formation is not observed for either fragment; thus, the tetramerization domain of the scaffolding subunit resides in the N-terminal portion of the polypeptide chain. Examination of both fragments by circular dichroism, Raman and NMR spectroscopies indicates a highly alpha-helical fold in each case. Nonetheless, pronounced differences are observed between spectral signatures of the two fragments. Notably, Raman spectra of fragments 141-292 and 141-303 indicate that elimination of residues 293 to 303 results in unfolding of an alpha-helical coat protein "recognition" domain encompassing about 20 to 30 residues. The thermostability of fragment 141-303, monitored over a wide concentration range by circular dichroism and Raman spectroscopy, indicates a broad denaturation transition for the monomeric (low concentration) form, while more cooperative unfolding is observed for the dimeric (high concentration) form. A lesser increase in cooperativity upon dimerization is obtained for fragment 141-292. Additionally, the C-terminal recognition domain constitutes the most stable and cooperative unit in the 141-303 fragment. Measurement of hydrogen-isotope exchange kinetics in scaffolding fragments by time-resolved Raman spectroscopy shows that the C terminus is the only protected segment of the polypeptide chain. On the basis of the measured hydrodynamic and spectroscopic properties, a domain structure is proposed for the scaffolding subunit. The roles of these domains in P22 procapsid assembly are discussed.

Fine structure genetic and physical map of the gene 3 to 10 region of the bacteriophage P22 chromosome.

The mechanism by which dsDNA is packaged by viruses is not yet understood in any system. Bacteriophage P22 has been a productive system in which to study the molecular genetics of virus particle assembly and DNA packaging. Only five phage encoded proteins, the products of genes 3, 2, 1, 8 and 5, are required for packaging the virus chromosome inside the coat protein shell. We report here the construction of a detailed genetic and physical map of these genes, the neighboring gene 4 and a portion of gene 10, in which 289 conditional lethal amber, opal, temperature sensitive and cold sensitive mutations are mapped into 44 small (several hundred base pair) intervals of known sequence. Knowledge of missense mutant phenotypes and information on the location of these mutations allows us to begin the assignment of partial protein functions to portions of these genes. The map and mapping strains will be of use in the further genetic dissection of the P22 DNA packaging and prohead assembly processes.